SN65HVD10P vs SN65HVD11P Comparison

Detailed side-by-side comparison of SN65HVD10P by Texas Instruments and SN65HVD11P by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Texas Instruments
SN65HVD10P SN65HVD10P - 3.3V 32Mbps RS-485 | Texas Instruments

SN65HVD10P - 3.3V 32Mbps RS-485 | Texas Instruments

SN65HVD10P ✓ Active
Texas Instruments
SN65HVD11P SN65HVD11P - 3.3V 10Mbps RS-485 Transceiver | Texas Instruments

SN65HVD11P - 3.3V 10Mbps RS-485 Transceiver | Texas Instruments

SN65HVD11P ✓ Active

Specification Comparison

Parameter SN65HVD10P SN65HVD11P
Brand Texas Instruments Texas Instruments
Category USB Interface ICs Interface ICs
Lifecycle Status Active Active
Product Type Half-duplex RS-485 transceiver Differential transceiver
Supply Voltage 3.3 V 3.3 V
Maximum Signaling Rate 32 Mbps 10 Mbps
Interface Standard RS-485 —
Duplex Mode Half-duplex —
Driver Output Type Three-state differential line driver 3-state differential line driver
Receiver Type Differential line receiver Differential input line receiver
Unit-Load Option 1/8 unit load, up to 256 nodes —
Bus-Pin ESD Protection Exceeds 16 kV HBM Exceeds 16 kV HBM
Standards Compliance ANSI TIA/EIA-485-A and ISO 8482:1993 —
Operating Temperature -40 °C to +85 °C —
Package 8-pin PDIP (P) 8-pin PDIP, 7.62 mm pitch
Pin Count 8 pins 8 pins
Mounting Type Through-hole Through-hole
RoHS Status [DATA_NEEDED: RoHS compliance status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH compliance status] [DATA_NEEDED: REACH status]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Lead-Free Status [DATA_NEEDED: lead-free status] [DATA_NEEDED: lead-free status]
Halogen-Free Status [DATA_NEEDED: halogen-free status] —
Device Type 1/1 transceiver, half-duplex —
Supported Interfaces — RS-485 and RS-422
Number of Transceivers per Package — 1
Operating Temperature Range — -40°C to +85°C
RS-485 Compliance — Meets or exceeds ISO 8482:1993
Transmission Line Type — Balanced transmission line
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

Datasheets & Resources

Browse All Products Create BOM Request Quote