SN65HVD10P vs SN65HVD11P Perbandingan
Perbandingan bersamaan detil SN65HVD10P dari Texas Instruments dan SN65HVD11P dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
SN65HVD11P - 3.3V 10Mbps RS-485 Transceiver | Texas Instruments
SN65HVD11P ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | SN65HVD10P | SN65HVD11P |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | USB Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Half-duplex RS-485 transceiver | Differential transceiver |
| Tegangan Pemuat | 3.3 V | 3.3 V |
| Maximum Signaling Rate | 32 Mbps | 10 Mbps |
| Interface Standard | RS-485 | — |
| Duplex Mode | Half-duplex | — |
| Driver Output Type | Three-state differential line driver | 3-state differential line driver |
| Receiver Type | Differential line receiver | Differential input line receiver |
| Unit-Load Option | 1/8 unit load, up to 256 nodes | — |
| Bus-Pin ESD Protection | Exceeds 16 kV HBM | Exceeds 16 kV HBM |
| Standards Compliance | ANSI TIA/EIA-485-A and ISO 8482:1993 | — |
| Suhu Kerja | -40 °C to +85 °C | — |
| Paket | 8-pin PDIP (P) | 8-pin PDIP, 7.62 mm pitch |
| Jumlah Pin | 8 pins | 8 pins |
| Tipe Mounting | Through-hole | Through-hole |
| Status RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Device Type | 1/1 transceiver, half-duplex | — |
| Supported Interfaces | — | RS-485 and RS-422 |
| Number of Transceivers per Package | — | 1 |
| Rentang Suhu Kerja | — | -40°C to +85°C |
| RS-485 Compliance | — | Meets or exceeds ISO 8482:1993 |
| Transmission Line Type | — | Balanced transmission line |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |