SN65HVD10P vs SN65HVD11P So sánh

So sánh chi tiết song song của SN65HVD10P bằng Texas Instruments và SN65HVD11P bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
SN65HVD10P SN65HVD10P - 3.3V 32Mbps RS-485 | Texas Instruments

SN65HVD10P - 3.3V 32Mbps RS-485 | Texas Instruments

SN65HVD10P ✓ Hoạt động
Texas Instruments
SN65HVD11P SN65HVD11P - 3.3V 10Mbps RS-485 Transceiver | Texas Instruments

SN65HVD11P - 3.3V 10Mbps RS-485 Transceiver | Texas Instruments

SN65HVD11P ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số SN65HVD10P SN65HVD11P
Thương hiệu Texas Instruments Texas Instruments
Danh mục USB Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Half-duplex RS-485 transceiver Differential transceiver
Điện áp cung cấp 3.3 V 3.3 V
Maximum Signaling Rate 32 Mbps 10 Mbps
Interface Standard RS-485 —
Duplex Mode Half-duplex —
Driver Output Type Three-state differential line driver 3-state differential line driver
Receiver Type Differential line receiver Differential input line receiver
Unit-Load Option 1/8 unit load, up to 256 nodes —
Bus-Pin ESD Protection Exceeds 16 kV HBM Exceeds 16 kV HBM
Standards Compliance ANSI TIA/EIA-485-A and ISO 8482:1993 —
Nhiệt độ hoạt động -40 °C to +85 °C —
Hộp 8-pin PDIP (P) 8-pin PDIP, 7.62 mm pitch
Số chân 8 pins 8 pins
Kiểu lắp đặt Through-hole Through-hole
Trạng thái RoHS [DATA_NEEDED: RoHS compliance status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH compliance status] [DATA_NEEDED: REACH status]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Lead-Free Status [DATA_NEEDED: lead-free status] [DATA_NEEDED: lead-free status]
Halogen-Free Status [DATA_NEEDED: halogen-free status] —
Device Type 1/1 transceiver, half-duplex —
Supported Interfaces — RS-485 and RS-422
Number of Transceivers per Package — 1
Khoảng nhiệt độ hoạt động — -40°C to +85°C
RS-485 Compliance — Meets or exceeds ISO 8482:1993
Transmission Line Type — Balanced transmission line
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá