SN65HVD230DR vs SN65HVD231DR Comparison
Detailed side-by-side comparison of SN65HVD230DR by Texas Instruments and SN65HVD231DR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
SN65HVD230DR - 3.3V CAN Transceiver 1Mbps 8-SOIC | Texas Instruments
SN65HVD230DR ✓ ActiveTexas Instruments
SN65HVD231DR - 3.3V 1Mbps CAN Transceiver | Texas Instruments
SN65HVD231DR ✓ ActiveSpecification Comparison
| Parameter | SN65HVD230DR | SN65HVD231DR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $0.94 | $0.00 |
| Product Type | CAN Bus Transceiver | 3.3 V CAN transceiver |
| Number of Drivers/Receivers | 1/1 | — |
| Protocol | CANbus (ISO 11898-2) | — |
| Supply Voltage | 3 V to 3.6 V (3.3 V nominal) | 3 V to 3.6 V |
| Maximum Data Rate | 1 Mbps | — |
| Driver/Receiver Configuration | Half-Duplex | — |
| Standby Mode Supply Current | 370 uA typical | — |
| ESD Protection (Bus Pins, HBM) | Exceeds 16 kV | — |
| Maximum Nodes on Bus | 120 nodes | — |
| Receiver Common-Mode Range | -2 V to 7 V | — |
| Operating Temperature | -40C to +85C | [DATA_NEEDED: operating temperature range] |
| Package | 8-SOIC (D) | 8-pin SOIC |
| Mounting Type | Surface Mount | Surface mount |
| RoHS Status | Compliant | unknown |
| RS Pin Function | Slew-rate control via external resistor | — |
| Maximum Signaling Rate | — | 1 Mbps |
| Standard Compatibility | — | ISO 11898-2 high-speed CAN physical layer |
| Bus Nodes | — | Up to 120 nodes |
| Bus-Pin ESD Protection | — | Exceeds 16 kV HBM |
| Receiver Input Impedance | — | High input impedance |
| Low-Power Mode | — | Sleep mode |
| Data Rate | — | Up to 1 Mbps |
| CAN Bus Pins | — | CANH and CANL |
| Unpowered-Node Behavior | — | Does not disturb the bus |
| Driver Transition Time | — | Adjustable for improved signal quality |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | unknown |
| Quiescent Current | — | [DATA_NEEDED: sleep-mode and standby current specifications] |