SN65HVD230DR vs SN65HVD231DR Comparaison
Comparaison détaillée côte à côte de SN65HVD230DR par Texas Instruments et SN65HVD231DR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
SN65HVD230DR - 3.3V CAN Transceiver 1Mbps 8-SOIC | Texas Instruments
SN65HVD230DR ✓ ActifTexas Instruments
SN65HVD231DR - 3.3V 1Mbps CAN Transceiver | Texas Instruments
SN65HVD231DR ✓ ActifComparaison des spécifications
| Paramètre | SN65HVD230DR | SN65HVD231DR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,94 | $0,00 |
| Product Type | CAN Bus Transceiver | 3.3 V CAN transceiver |
| Number of Drivers/Receivers | 1/1 | — |
| Protocol | CANbus (ISO 11898-2) | — |
| Tension d'alimentation | 3 V to 3.6 V (3.3 V nominal) | 3 V to 3.6 V |
| Maximum Data Rate | 1 Mbps | — |
| Driver/Receiver Configuration | Half-Duplex | — |
| Standby Mode Supply Current | 370 uA typical | — |
| ESD Protection (Bus Pins, HBM) | Exceeds 16 kV | — |
| Maximum Nodes on Bus | 120 nodes | — |
| Receiver Common-Mode Range | -2 V to 7 V | — |
| Température de fonctionnement | -40C to +85C | [DATA_NEEDED: operating temperature range] |
| Boîtier | 8-SOIC (D) | 8-pin SOIC |
| Type de montage | Surface Mount | Surface mount |
| Statut RoHS | Compliant | unknown |
| RS Pin Function | Slew-rate control via external resistor | — |
| Maximum Signaling Rate | — | 1 Mbps |
| Standard Compatibility | — | ISO 11898-2 high-speed CAN physical layer |
| Bus Nodes | — | Up to 120 nodes |
| Bus-Pin ESD Protection | — | Exceeds 16 kV HBM |
| Receiver Input Impedance | — | High input impedance |
| Low-Power Mode | — | Sleep mode |
| Débit de données | — | Up to 1 Mbps |
| CAN Bus Pins | — | CANH and CANL |
| Unpowered-Node Behavior | — | Does not disturb the bus |
| Driver Transition Time | — | Adjustable for improved signal quality |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | unknown |
| Courant de repos | — | [DATA_NEEDED: sleep-mode and standby current specifications] |