SN65HVD230DR vs SN65HVD231DR Comparación
Comparación detallada lado a lado de SN65HVD230DR por Texas Instruments y SN65HVD231DR por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
SN65HVD230DR - 3.3V CAN Transceiver 1Mbps 8-SOIC | Texas Instruments
SN65HVD230DR ✓ ActivoTexas Instruments
SN65HVD231DR - 3.3V 1Mbps CAN Transceiver | Texas Instruments
SN65HVD231DR ✓ ActivoComparación de especificaciones
| Parámetro | SN65HVD230DR | SN65HVD231DR |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,94 | $0,00 |
| Product Type | CAN Bus Transceiver | 3.3 V CAN transceiver |
| Number of Drivers/Receivers | 1/1 | — |
| Protocol | CANbus (ISO 11898-2) | — |
| Tensión de alimentación | 3 V to 3.6 V (3.3 V nominal) | 3 V to 3.6 V |
| Maximum Data Rate | 1 Mbps | — |
| Driver/Receiver Configuration | Half-Duplex | — |
| Standby Mode Supply Current | 370 uA typical | — |
| ESD Protection (Bus Pins, HBM) | Exceeds 16 kV | — |
| Maximum Nodes on Bus | 120 nodes | — |
| Receiver Common-Mode Range | -2 V to 7 V | — |
| Temperatura de funcionamiento | -40C to +85C | [DATA_NEEDED: operating temperature range] |
| Encapsulado | 8-SOIC (D) | 8-pin SOIC |
| Tipo de montaje | Surface Mount | Surface mount |
| Estado RoHS | Compliant | unknown |
| RS Pin Function | Slew-rate control via external resistor | — |
| Maximum Signaling Rate | — | 1 Mbps |
| Standard Compatibility | — | ISO 11898-2 high-speed CAN physical layer |
| Bus Nodes | — | Up to 120 nodes |
| Bus-Pin ESD Protection | — | Exceeds 16 kV HBM |
| Receiver Input Impedance | — | High input impedance |
| Low-Power Mode | — | Sleep mode |
| Velocidad de datos | — | Up to 1 Mbps |
| CAN Bus Pins | — | CANH and CANL |
| Unpowered-Node Behavior | — | Does not disturb the bus |
| Driver Transition Time | — | Adjustable for improved signal quality |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | unknown |
| Corriente en reposo | — | [DATA_NEEDED: sleep-mode and standby current specifications] |