SN65HVD30D vs SN65HVD32D Comparison
Detailed side-by-side comparison of SN65HVD30D by Texas Instruments and SN65HVD32D by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
SN65HVD30D - 3.3V Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD30D ✓ ActiveTexas Instruments
SN65HVD32D - 3.3V Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD32D ✓ ActiveSpecification Comparison
| Parameter | SN65HVD30D | SN65HVD32D |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | 3.3 V full-duplex RS-485 driver and receiver | Full-duplex RS-422/RS-485 transceiver |
| Supply Voltage | 3.3 V | — |
| Supported Standards | RS-422 and RS-485 | — |
| Bus Length | up to 1500 m | — |
| Duplex Mode | Full-duplex | — |
| Driver Output | 3-state differential line driver | — |
| Receiver Input | Differential-input line receiver | — |
| Logic Interface | Separate driver and receiver input and output pins | — |
| Package | 8-pin SOIC (D) | 8-pin SOIC (D), MS-012AA |
| Operating Temperature | -40°C to 85°C | -40°C to 85°C |
| Mounting Type | Surface mount | Surface mount |
| Data Rate | [DATA_NEEDED: maximum signaling rate] | — |
| Driver Differential Output Voltage | [DATA_NEEDED: driver differential output voltage] | — |
| Receiver Differential Input Threshold | [DATA_NEEDED: receiver differential input threshold] | — |
| Supply Current | [DATA_NEEDED: operating supply current] | — |
| Power-Supply Rejection Ratio | [DATA_NEEDED: power-supply rejection ratio] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Moisture Sensitivity Level | [DATA_NEEDED: moisture sensitivity level] | — |
| Thermal Resistance | [DATA_NEEDED: junction-to-ambient thermal resistance] | — |
| Number of Drivers | — | 1 driver |
| Number of Receivers | — | 1 receiver |
| Supply Voltage Range | — | 3 V to 3.6 V |
| Nominal Supply Voltage | — | 3.3 V |
| Maximum Signaling Rate | — | 1 Mbps |
| Bus Standard | — | RS-422 and RS-485 |
| Unit Load | — | 1/8 unit load |
| Maximum Bus Nodes | — | Up to 256 nodes |
| Maximum Cable Length | — | Up to 1500 m |
| Bus-Pin ESD Protection | — | Exceeds 15 kV HBM |
| Driver Output Transition Time | — | Supports signaling rates up to 1 Mbps |
| Pin Count | — | 8 pins |