SN65HVD30D vs SN65HVD32D Perbandingan
Perbandingan bersamaan detil SN65HVD30D dari Texas Instruments dan SN65HVD32D dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
SN65HVD30D - 3.3V Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD30D ✓ AktifTexas Instruments
SN65HVD32D - 3.3V Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD32D ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | SN65HVD30D | SN65HVD32D |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | 3.3 V full-duplex RS-485 driver and receiver | Full-duplex RS-422/RS-485 transceiver |
| Tegangan Pemuat | 3.3 V | — |
| Supported Standards | RS-422 and RS-485 | — |
| Bus Length | up to 1500 m | — |
| Duplex Mode | Full-duplex | — |
| Driver Output | 3-state differential line driver | — |
| Receiver Input | Differential-input line receiver | — |
| Logic Interface | Separate driver and receiver input and output pins | — |
| Paket | 8-pin SOIC (D) | 8-pin SOIC (D), MS-012AA |
| Suhu Kerja | -40°C to 85°C | -40°C to 85°C |
| Tipe Mounting | Surface mount | Surface mount |
| Laju Data | [DATA_NEEDED: maximum signaling rate] | — |
| Driver Differential Output Voltage | [DATA_NEEDED: driver differential output voltage] | — |
| Receiver Differential Input Threshold | [DATA_NEEDED: receiver differential input threshold] | — |
| Arus Pemuat | [DATA_NEEDED: operating supply current] | — |
| Power-Supply Rejection Ratio | [DATA_NEEDED: power-supply rejection ratio] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Moisture Sensitivity Level | [DATA_NEEDED: moisture sensitivity level] | — |
| Tahanan Panas | [DATA_NEEDED: junction-to-ambient thermal resistance] | — |
| Number of Drivers | — | 1 driver |
| Number of Receivers | — | 1 receiver |
| Supply Voltage Range | — | 3 V to 3.6 V |
| Nominal Supply Voltage | — | 3.3 V |
| Maximum Signaling Rate | — | 1 Mbps |
| Bus Standard | — | RS-422 and RS-485 |
| Unit Load | — | 1/8 unit load |
| Maximum Bus Nodes | — | Up to 256 nodes |
| Maximum Cable Length | — | Up to 1500 m |
| Bus-Pin ESD Protection | — | Exceeds 15 kV HBM |
| Driver Output Transition Time | — | Supports signaling rates up to 1 Mbps |
| Jumlah Pin | — | 8 pins |