SN65HVD30D vs SN65HVD32D Comparaison
Comparaison détaillée côte à côte de SN65HVD30D par Texas Instruments et SN65HVD32D par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
SN65HVD30D - 3.3V Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD30D ✓ ActifTexas Instruments
SN65HVD32D - 3.3V Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD32D ✓ ActifComparaison des spécifications
| Paramètre | SN65HVD30D | SN65HVD32D |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | 3.3 V full-duplex RS-485 driver and receiver | Full-duplex RS-422/RS-485 transceiver |
| Tension d'alimentation | 3.3 V | — |
| Supported Standards | RS-422 and RS-485 | — |
| Bus Length | up to 1500 m | — |
| Duplex Mode | Full-duplex | — |
| Driver Output | 3-state differential line driver | — |
| Receiver Input | Differential-input line receiver | — |
| Logic Interface | Separate driver and receiver input and output pins | — |
| Boîtier | 8-pin SOIC (D) | 8-pin SOIC (D), MS-012AA |
| Température de fonctionnement | -40°C to 85°C | -40°C to 85°C |
| Type de montage | Surface mount | Surface mount |
| Débit de données | [DATA_NEEDED: maximum signaling rate] | — |
| Driver Differential Output Voltage | [DATA_NEEDED: driver differential output voltage] | — |
| Receiver Differential Input Threshold | [DATA_NEEDED: receiver differential input threshold] | — |
| Courant d'alimentation | [DATA_NEEDED: operating supply current] | — |
| Power-Supply Rejection Ratio | [DATA_NEEDED: power-supply rejection ratio] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Moisture Sensitivity Level | [DATA_NEEDED: moisture sensitivity level] | — |
| Résistance thermique | [DATA_NEEDED: junction-to-ambient thermal resistance] | — |
| Number of Drivers | — | 1 driver |
| Number of Receivers | — | 1 receiver |
| Supply Voltage Range | — | 3 V to 3.6 V |
| Nominal Supply Voltage | — | 3.3 V |
| Maximum Signaling Rate | — | 1 Mbps |
| Bus Standard | — | RS-422 and RS-485 |
| Unit Load | — | 1/8 unit load |
| Maximum Bus Nodes | — | Up to 256 nodes |
| Maximum Cable Length | — | Up to 1500 m |
| Bus-Pin ESD Protection | — | Exceeds 15 kV HBM |
| Driver Output Transition Time | — | Supports signaling rates up to 1 Mbps |
| Nombre de broches | — | 8 pins |