SN65HVD52D vs SN65HVD05D Comparison
Detailed side-by-side comparison of SN65HVD52D by Texas Instruments and SN65HVD05D by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
SN65HVD52D - 1 Mbps Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD52D ✓ ActiveTexas Instruments
SN65HVD05D - High-Output RS-485 Transceiver | Texas Instruments
SN65HVD05D ✓ ActiveSpecification Comparison
| Parameter | SN65HVD52D | SN65HVD05D |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | RS-485 / RS-422 full-duplex transceiver | Half-duplex RS-422/RS-485 transceiver |
| Driver / Receiver Count | 1 driver and 1 receiver | — |
| Data Rate | 1 Mbps | — |
| Supply Voltage | 5 V | — |
| Maximum Supply Voltage | 5.5 V | — |
| Operating Temperature | -40 C to +85 C | — |
| Package | 8-pin SOIC (D) | 8-pin SOIC (D) |
| Mounting Type | Surface mount | Surface mount |
| Driver Configuration | Full-duplex | — |
| Bus Standard | RS-485 and RS-422 | — |
| Unit Load | 1/8 unit-load option | — |
| Maximum Bus Nodes | Up to 256 nodes | — |
| Bus-Pin ESD Protection | Exceeds 15 kV HBM | Exceeds 16 kV HBM |
| Standby Current | 1 uA | — |
| Maximum Transmit Delay | 230 ns | — |
| Maximum Supply Current | 8 mA | — |
| Interface Standard | EIA-485-A | — |
| RoHS Status | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification status] |
| Driver and Receiver Count | — | 1 differential driver and 1 differential receiver |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Minimum Differential Output Voltage | — | 2.5 V into a 54-ohm load |
| Driver Output State | — | 3-state |
| Receiver Failsafe Behavior | — | Open-circuit, short-circuit, and idle-bus failsafe |
| Unit Load Option | — | 1/8 unit load |
| Maximum Node Count | — | Up to 256 nodes on the bus |
| Driver Output Slew Rate | — | Controlled |
| Communication Mode | — | Half-duplex |
| Standards Compatibility | — | ANSI TIA/EIA-485-A and ISO 8482E |
| Operating Temperature Range | — | [DATA_NEEDED: operating temperature range] |