SN65HVD52D vs SN65HVD05D Comparación
Comparación detallada lado a lado de SN65HVD52D por Texas Instruments y SN65HVD05D por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
SN65HVD52D - 1 Mbps Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD52D ✓ ActivoTexas Instruments
SN65HVD05D - High-Output RS-485 Transceiver | Texas Instruments
SN65HVD05D ✓ ActivoComparación de especificaciones
| Parámetro | SN65HVD52D | SN65HVD05D |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | RS-485 / RS-422 full-duplex transceiver | Half-duplex RS-422/RS-485 transceiver |
| Driver / Receiver Count | 1 driver and 1 receiver | — |
| Velocidad de datos | 1 Mbps | — |
| Tensión de alimentación | 5 V | — |
| Maximum Supply Voltage | 5.5 V | — |
| Temperatura de funcionamiento | -40 C to +85 C | — |
| Encapsulado | 8-pin SOIC (D) | 8-pin SOIC (D) |
| Tipo de montaje | Surface mount | Surface mount |
| Driver Configuration | Full-duplex | — |
| Bus Standard | RS-485 and RS-422 | — |
| Unit Load | 1/8 unit-load option | — |
| Maximum Bus Nodes | Up to 256 nodes | — |
| Bus-Pin ESD Protection | Exceeds 15 kV HBM | Exceeds 16 kV HBM |
| Standby Current | 1 uA | — |
| Maximum Transmit Delay | 230 ns | — |
| Maximum Supply Current | 8 mA | — |
| Interface Standard | EIA-485-A | — |
| Estado RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification status] |
| Driver and Receiver Count | — | 1 differential driver and 1 differential receiver |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Minimum Differential Output Voltage | — | 2.5 V into a 54-ohm load |
| Driver Output State | — | 3-state |
| Receiver Failsafe Behavior | — | Open-circuit, short-circuit, and idle-bus failsafe |
| Unit Load Option | — | 1/8 unit load |
| Maximum Node Count | — | Up to 256 nodes on the bus |
| Driver Output Slew Rate | — | Controlled |
| Communication Mode | — | Half-duplex |
| Standards Compatibility | — | ANSI TIA/EIA-485-A and ISO 8482E |
| Rango de temperatura de funcionamiento | — | [DATA_NEEDED: operating temperature range] |