SN65HVD52D vs SN65HVD05D Karşılaştırma
Ayrıntılı yan yana karşılaştırma SN65HVD52D tarafından Texas Instruments ve SN65HVD05D tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
SN65HVD52D - 1 Mbps Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD52D ✓ AktifTexas Instruments
SN65HVD05D - High-Output RS-485 Transceiver | Texas Instruments
SN65HVD05D ✓ AktifÖzellik Karşılaştırması
| Parametre | SN65HVD52D | SN65HVD05D |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | RS-485 / RS-422 full-duplex transceiver | Half-duplex RS-422/RS-485 transceiver |
| Driver / Receiver Count | 1 driver and 1 receiver | — |
| Veri Hızı | 1 Mbps | — |
| Besleme Gerilimi | 5 V | — |
| Maximum Supply Voltage | 5.5 V | — |
| İşletim Sıcaklığı | -40 C to +85 C | — |
| Paket | 8-pin SOIC (D) | 8-pin SOIC (D) |
| Montaj Türü | Surface mount | Surface mount |
| Driver Configuration | Full-duplex | — |
| Bus Standard | RS-485 and RS-422 | — |
| Unit Load | 1/8 unit-load option | — |
| Maximum Bus Nodes | Up to 256 nodes | — |
| Bus-Pin ESD Protection | Exceeds 15 kV HBM | Exceeds 16 kV HBM |
| Standby Current | 1 uA | — |
| Maximum Transmit Delay | 230 ns | — |
| Maximum Supply Current | 8 mA | — |
| Interface Standard | EIA-485-A | — |
| RoHS Durumu | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification status] |
| Driver and Receiver Count | — | 1 differential driver and 1 differential receiver |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Minimum Differential Output Voltage | — | 2.5 V into a 54-ohm load |
| Driver Output State | — | 3-state |
| Receiver Failsafe Behavior | — | Open-circuit, short-circuit, and idle-bus failsafe |
| Unit Load Option | — | 1/8 unit load |
| Maximum Node Count | — | Up to 256 nodes on the bus |
| Driver Output Slew Rate | — | Controlled |
| Communication Mode | — | Half-duplex |
| Standards Compatibility | — | ANSI TIA/EIA-485-A and ISO 8482E |
| İşletim Sıcaklığı Aralığı | — | [DATA_NEEDED: operating temperature range] |