SN65HVD73DGS vs SN65HVD75D Comparison

Detailed side-by-side comparison of SN65HVD73DGS by Texas Instruments and SN65HVD75D by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Texas Instruments
SN65HVD73DGS SN65HVD73DGS - 3.3V Full-Duplex RS-485 20Mbps | Texas Instruments

SN65HVD73DGS - 3.3V Full-Duplex RS-485 20Mbps | Texas Instruments

SN65HVD73DGS ✓ Active
Texas Instruments
SN65HVD75D SN65HVD75D - 3.3V 20Mbps RS-485 Transceiver | Texas Instruments

SN65HVD75D - 3.3V 20Mbps RS-485 Transceiver | Texas Instruments

SN65HVD75D ✓ Active

Specification Comparison

Parameter SN65HVD73DGS SN65HVD75D
Brand Texas Instruments Texas Instruments
Category Interface ICs Interface ICs
Lifecycle Status Active Active
Protocol RS-422, RS-485 —
Number of Drivers/Receivers 1/1 —
Duplex Full —
Supply Voltage (VCC) 3 V to 3.6 V —
Data Rate 20 Mbps (max) —
ESD Protection (Bus Pins) 12 kV IEC 61000-4-2 contact discharge —
Receiver Input Impedance 1/8 unit load (up to 256 nodes) —
Common-Mode Voltage Range -7 V to +12 V —
Driver Enable Yes, active-high (DE pin) —
Receiver Enable Yes, active-low (RE pin) —
Operating Temperature -40 °C to +125 °C —
Package 10-VSSOP (DGS) 3.0 mm × 3.0 mm 8-pin SOIC (D)
Mounting Type Surface Mount Surface mount
MSL Level 2 —
RoHS Status Compliant [DATA_NEEDED: RoHS compliance status]
Product Type — Half-duplex RS-485 transceiver
Supply Voltage — 3.3 V
Maximum Signaling Rate — 20 Mbps
Logic Input Compatibility — 5 V tolerant; compatible with 3.3 V or 5 V controllers
ESD Protection — IEC ESD protection on bus pins
ESD Test Model — Human Body Model and IEC Contact Discharge
Operating Temperature Range — -40°C to 125°C
Driver and Receiver Architecture — One differential driver and one differential receiver
Duplex Mode — Half-duplex
Bus Standards — RS-485 and RS-422 compatible transceiver
Recommended Supply Bypass — 100 nF ceramic capacitor
Recommended 3.3 V Regulator — TPS76333
Recommended Isolated Supply Reference — SN6501
REACH Status — [DATA_NEEDED: REACH compliance status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

Datasheets & Resources

Browse All Products Create BOM Request Quote