SN65HVD73DGS vs SN65HVD75D Comparação
Comparação detalhada lado a lado de SN65HVD73DGS por Texas Instruments e SN65HVD75D por Texas Instruments. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Texas Instruments
SN65HVD73DGS - 3.3V Full-Duplex RS-485 20Mbps | Texas Instruments
SN65HVD73DGS ✓ AtivoTexas Instruments
SN65HVD75D - 3.3V 20Mbps RS-485 Transceiver | Texas Instruments
SN65HVD75D ✓ AtivoComparação de especificações
| Parâmetro | SN65HVD73DGS | SN65HVD75D |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Full | — |
| Supply Voltage (VCC) | 3 V to 3.6 V | — |
| Taxa de dados | 20 Mbps (max) | — |
| ESD Protection (Bus Pins) | 12 kV IEC 61000-4-2 contact discharge | — |
| Receiver Input Impedance | 1/8 unit load (up to 256 nodes) | — |
| Common-Mode Voltage Range | -7 V to +12 V | — |
| Driver Enable | Yes, active-high (DE pin) | — |
| Receiver Enable | Yes, active-low (RE pin) | — |
| Temperatura de operação | -40 °C to +125 °C | — |
| Encapsulamento | 10-VSSOP (DGS) 3.0 mm × 3.0 mm | 8-pin SOIC (D) |
| Tipo de montagem | Surface Mount | Surface mount |
| Nível MSL | 2 | — |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Product Type | — | Half-duplex RS-485 transceiver |
| Tensão de alimentação | — | 3.3 V |
| Maximum Signaling Rate | — | 20 Mbps |
| Logic Input Compatibility | — | 5 V tolerant; compatible with 3.3 V or 5 V controllers |
| ESD Protection | — | IEC ESD protection on bus pins |
| ESD Test Model | — | Human Body Model and IEC Contact Discharge |
| Faixa de temperatura de operação | — | -40°C to 125°C |
| Driver and Receiver Architecture | — | One differential driver and one differential receiver |
| Duplex Mode | — | Half-duplex |
| Bus Standards | — | RS-485 and RS-422 compatible transceiver |
| Recommended Supply Bypass | — | 100 nF ceramic capacitor |
| Recommended 3.3 V Regulator | — | TPS76333 |
| Recommended Isolated Supply Reference | — | SN6501 |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |