SN65HVD73DGS vs SN65HVD75D 比較

詳細並排比較 SN65HVD73DGS 由 Texas Instruments 與 SN65HVD75D 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Texas Instruments
SN65HVD73DGS SN65HVD73DGS - 3.3V Full-Duplex RS-485 20Mbps | Texas Instruments

SN65HVD73DGS - 3.3V Full-Duplex RS-485 20Mbps | Texas Instruments

SN65HVD73DGS ✓ 啟用中
Texas Instruments
SN65HVD75D SN65HVD75D - 3.3V 20Mbps RS-485 Transceiver | Texas Instruments

SN65HVD75D - 3.3V 20Mbps RS-485 Transceiver | Texas Instruments

SN65HVD75D ✓ 啟用中

規格比較

參數 SN65HVD73DGS SN65HVD75D
品牌 Texas Instruments Texas Instruments
類別 Interface ICs Interface ICs
生命週期狀態 啟用中 啟用中
Protocol RS-422, RS-485 —
Number of Drivers/Receivers 1/1 —
Duplex Full —
Supply Voltage (VCC) 3 V to 3.6 V —
資料速率 20 Mbps (max) —
ESD Protection (Bus Pins) 12 kV IEC 61000-4-2 contact discharge —
Receiver Input Impedance 1/8 unit load (up to 256 nodes) —
Common-Mode Voltage Range -7 V to +12 V —
Driver Enable Yes, active-high (DE pin) —
Receiver Enable Yes, active-low (RE pin) —
工作溫度 -40 °C to +125 °C —
封裝 10-VSSOP (DGS) 3.0 mm × 3.0 mm 8-pin SOIC (D)
安裝類型 Surface Mount Surface mount
MSL 等級 2 —
RoHS 狀態 Compliant [DATA_NEEDED: RoHS compliance status]
Product Type — Half-duplex RS-485 transceiver
供應電壓 — 3.3 V
Maximum Signaling Rate — 20 Mbps
Logic Input Compatibility — 5 V tolerant; compatible with 3.3 V or 5 V controllers
ESD Protection — IEC ESD protection on bus pins
ESD Test Model — Human Body Model and IEC Contact Discharge
工作溫度範圍 — -40°C to 125°C
Driver and Receiver Architecture — One differential driver and one differential receiver
Duplex Mode — Half-duplex
Bus Standards — RS-485 and RS-422 compatible transceiver
Recommended Supply Bypass — 100 nF ceramic capacitor
Recommended 3.3 V Regulator — TPS76333
Recommended Isolated Supply Reference — SN6501
REACH Status — [DATA_NEEDED: REACH compliance status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

資料表與資源

瀏覽所有產品 建立 BOM 索取報價