SN75176 vs SP485EN-L Comparison
Detailed side-by-side comparison of SN75176 by Texas Instruments and SP485EN-L by MaxLinear. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
SN75176 - Differential Bus Transceiver RS-485/RS-422 | Texas Instruments
SN75176 ✓ Active
Specification Comparison
| Parameter | SN75176 | SP485EN-L |
|---|---|---|
| Brand | Texas Instruments | MaxLinear |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Function | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Receiver Hysteresis | 50 mV (typical) | — |
| Supply Voltage (Vcc) | 4.75 V to 5.25 V | — |
| Operating Temperature | 0 °C to +70 °C | — |
| Driver Output Current | ±60 mA (max) | [DATA_NEEDED: driver output current] |
| Common-Mode Input Range | -7 V to +12 V | — |
| Differential Input Threshold | ±200 mV | — |
| Quiescent Supply Current (enabled) | 30 mA (typical) | — |
| Shutdown Supply Current | 1 µA (typical) | — |
| Package | 8-pin PDIP (P) | 8-pin SOIC |
| Mounting Type | Through-Hole | Surface mount |
| Standards Compliance | ANSI TIA/EIA-422-B, TIA/EIA-485-A, ITU V.11, ITU X.27 | — |
| RoHS Status | Compliant | unknown |
| Product Type | — | Half-duplex differential transceiver |
| Interface Standards | — | RS-422 and RS-485 |
| Maximum Data Rate | — | 5 Mbps |
| Supply Voltage Range | — | 4.75V to 5.25V |
| Nominal Supply Voltage | — | 5 V |
| Operating Temperature Range | — | -40°C to +85°C |
| Driver and Receiver Count | — | 1 differential driver and 1 differential receiver |
| Duplex Mode | — | Half-duplex |
| Receiver Input Type | — | Differential Schmitt-trigger input |
| Process Technology | — | BiCMOS |
| Package Width | — | 3.9 mm |
| Package Length | — | 4.9 mm |
| Transceiver Count per Package | — | 1 |
| Supply Decoupling Requirement | — | [DATA_NEEDED: recommended decoupling capacitor value and ESR] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver input sensitivity] |
| Propagation Delay | — | [DATA_NEEDED: receiver and driver propagation delay] |
| Input Impedance | — | [DATA_NEEDED: receiver input impedance] |
| Shutdown Function | — | [DATA_NEEDED: shutdown or power-save support] |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | [DATA_NEEDED: automotive qualification status] |