SN75176 vs SP485EN-L So sánh

So sánh chi tiết song song của SN75176 bằng Texas Instruments và SP485EN-L bằng MaxLinear. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

MaxLinear
SP485EN-L SP485EN-L - 5Mbps RS-485/RS-422 Transceiver | MaxLinear

SP485EN-L - 5Mbps RS-485/RS-422 Transceiver | MaxLinear

SP485EN-L ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số SN75176 SP485EN-L
Thương hiệu Texas Instruments MaxLinear
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Chức năng Transceiver —
Protocol RS-422, RS-485 —
Number of Drivers/Receivers 1/1 —
Duplex Half —
Receiver Hysteresis 50 mV (typical) —
Supply Voltage (Vcc) 4.75 V to 5.25 V —
Nhiệt độ hoạt động 0 °C to +70 °C —
Driver Output Current ±60 mA (max) [DATA_NEEDED: driver output current]
Common-Mode Input Range -7 V to +12 V —
Differential Input Threshold ±200 mV —
Quiescent Supply Current (enabled) 30 mA (typical) —
Shutdown Supply Current 1 µA (typical) —
Hộp 8-pin PDIP (P) 8-pin SOIC
Kiểu lắp đặt Through-Hole Surface mount
Standards Compliance ANSI TIA/EIA-422-B, TIA/EIA-485-A, ITU V.11, ITU X.27 —
Trạng thái RoHS Compliant unknown
Product Type — Half-duplex differential transceiver
Interface Standards — RS-422 and RS-485
Maximum Data Rate — 5 Mbps
Supply Voltage Range — 4.75V to 5.25V
Nominal Supply Voltage — 5 V
Khoảng nhiệt độ hoạt động — -40°C to +85°C
Driver and Receiver Count — 1 differential driver and 1 differential receiver
Duplex Mode — Half-duplex
Receiver Input Type — Differential Schmitt-trigger input
Process Technology — BiCMOS
Package Width — 3.9 mm
Package Length — 4.9 mm
Transceiver Count per Package — 1
Supply Decoupling Requirement — [DATA_NEEDED: recommended decoupling capacitor value and ESR]
Receiver Sensitivity — [DATA_NEEDED: receiver input sensitivity]
Propagation Delay — [DATA_NEEDED: receiver and driver propagation delay]
Input Impedance — [DATA_NEEDED: receiver input impedance]
Shutdown Function — [DATA_NEEDED: shutdown or power-save support]
REACH Status — unknown
AEC-Q100 Qualification — [DATA_NEEDED: automotive qualification status]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá