SN75176 vs SP485EN-L 比較

詳細並排比較 SN75176 由 Texas Instruments 與 SP485EN-L 由 MaxLinear. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

規格比較

參數 SN75176 SP485EN-L
品牌 Texas Instruments MaxLinear
類別 Interface ICs Interface ICs
生命週期狀態 啟用中 啟用中
功能 Transceiver —
Protocol RS-422, RS-485 —
Number of Drivers/Receivers 1/1 —
Duplex Half —
Receiver Hysteresis 50 mV (typical) —
Supply Voltage (Vcc) 4.75 V to 5.25 V —
工作溫度 0 °C to +70 °C —
Driver Output Current ±60 mA (max) [DATA_NEEDED: driver output current]
Common-Mode Input Range -7 V to +12 V —
Differential Input Threshold ±200 mV —
Quiescent Supply Current (enabled) 30 mA (typical) —
Shutdown Supply Current 1 µA (typical) —
封裝 8-pin PDIP (P) 8-pin SOIC
安裝類型 Through-Hole Surface mount
Standards Compliance ANSI TIA/EIA-422-B, TIA/EIA-485-A, ITU V.11, ITU X.27 —
RoHS 狀態 Compliant unknown
Product Type — Half-duplex differential transceiver
Interface Standards — RS-422 and RS-485
Maximum Data Rate — 5 Mbps
Supply Voltage Range — 4.75V to 5.25V
Nominal Supply Voltage — 5 V
工作溫度範圍 — -40°C to +85°C
Driver and Receiver Count — 1 differential driver and 1 differential receiver
Duplex Mode — Half-duplex
Receiver Input Type — Differential Schmitt-trigger input
Process Technology — BiCMOS
Package Width — 3.9 mm
Package Length — 4.9 mm
Transceiver Count per Package — 1
Supply Decoupling Requirement — [DATA_NEEDED: recommended decoupling capacitor value and ESR]
Receiver Sensitivity — [DATA_NEEDED: receiver input sensitivity]
Propagation Delay — [DATA_NEEDED: receiver and driver propagation delay]
Input Impedance — [DATA_NEEDED: receiver input impedance]
Shutdown Function — [DATA_NEEDED: shutdown or power-save support]
REACH Status — unknown
AEC-Q100 Qualification — [DATA_NEEDED: automotive qualification status]

資料表與資源

瀏覽所有產品 建立 BOM 索取報價