ST485CDR vs SN75176BDR Comparison
Detailed side-by-side comparison of ST485CDR by STMicroelectronics and SN75176BDR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
STMicroelectronics
ST485CDR - 2.5Mbps Low-Power RS-485/RS-422 Transceiver SOIC-8 | ST
ST485CDR ✓ ActiveSpecification Comparison
| Parameter | ST485CDR | SN75176BDR |
|---|---|---|
| Brand | STMicroelectronics | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $0.71 | $0.11 |
| Function | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Data Rate | 2.5 Mbps | — |
| Supply Voltage | 4.75 V to 5.25 V | 5 V |
| Supply Current (unloaded, drivers disabled) | 300 uA typical | — |
| Common-Mode Range (bus pins) | -7 V to +12 V | — |
| Receiver Input Hysteresis | 70 mV typical | — |
| Operating Temperature | 0C to +70C (C grade) | — |
| Package | SOIC-8 | SOIC (D), 8 pins |
| Mounting Type | Surface Mount | Surface mount |
| Driver Short-Circuit Protection | Yes, current-limited | — |
| Thermal Shutdown | Yes | — |
| ESD Protection (bus pins) | [DATA_NEEDED: ESD rating] | — |
| RoHS Status | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | Differential bus transceiver |
| Supported Standards | — | TIA/EIA-422-B and TIA/EIA-485-A |
| ITU Recommendations | — | V.11 and X.27 |
| Communication Mode | — | Bidirectional |
| Bus Architecture | — | Multipoint transmission |
| Transmission Line Type | — | Balanced transmission lines |
| Driver Output State | — | 3-state |
| Receiver Output State | — | 3-state |
| Operating Temperature Range | — | 0 °C to 70 °C |
| Pin Count | — | 8 pins |
| Manufacturer | — | Texas Instruments |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| Input and Output Electrical Limits | — | [DATA_NEEDED: input and output electrical limits] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Quiescent Current | — | [DATA_NEEDED: quiescent current] |