ST485CDR vs SN75176BDR Comparaison
Comparaison détaillée côte à côte de ST485CDR par STMicroelectronics et SN75176BDR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
ST485CDR - 2.5Mbps Low-Power RS-485/RS-422 Transceiver SOIC-8 | ST
ST485CDR ✓ ActifComparaison des spécifications
| Paramètre | ST485CDR | SN75176BDR |
|---|---|---|
| Marque | STMicroelectronics | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,71 | $0,11 |
| Fonction | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Débit de données | 2.5 Mbps | — |
| Tension d'alimentation | 4.75 V to 5.25 V | 5 V |
| Supply Current (unloaded, drivers disabled) | 300 uA typical | — |
| Common-Mode Range (bus pins) | -7 V to +12 V | — |
| Receiver Input Hysteresis | 70 mV typical | — |
| Température de fonctionnement | 0C to +70C (C grade) | — |
| Boîtier | SOIC-8 | SOIC (D), 8 pins |
| Type de montage | Surface Mount | Surface mount |
| Driver Short-Circuit Protection | Yes, current-limited | — |
| Arrêt thermique | Yes | — |
| ESD Protection (bus pins) | [DATA_NEEDED: ESD rating] | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | Differential bus transceiver |
| Supported Standards | — | TIA/EIA-422-B and TIA/EIA-485-A |
| ITU Recommendations | — | V.11 and X.27 |
| Communication Mode | — | Bidirectional |
| Bus Architecture | — | Multipoint transmission |
| Transmission Line Type | — | Balanced transmission lines |
| Driver Output State | — | 3-state |
| Receiver Output State | — | 3-state |
| Plage de température de fonctionnement | — | 0 °C to 70 °C |
| Nombre de broches | — | 8 pins |
| Manufacturer | — | Texas Instruments |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| Input and Output Electrical Limits | — | [DATA_NEEDED: input and output electrical limits] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Courant de repos | — | [DATA_NEEDED: quiescent current] |