ST485CDR vs SN75176BDR Vergleich
Detaillierter Direktvergleich von ST485CDR von STMicroelectronics und SN75176BDR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
ST485CDR - 2.5Mbps Low-Power RS-485/RS-422 Transceiver SOIC-8 | ST
ST485CDR ✓ AktivSpezifikationsvergleich
| Parameter | ST485CDR | SN75176BDR |
|---|---|---|
| Marke | STMicroelectronics | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,71 | $0,11 |
| Funktion | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Datenrate | 2.5 Mbps | — |
| Versorgungsspannung | 4.75 V to 5.25 V | 5 V |
| Supply Current (unloaded, drivers disabled) | 300 uA typical | — |
| Common-Mode Range (bus pins) | -7 V to +12 V | — |
| Receiver Input Hysteresis | 70 mV typical | — |
| Betriebstemperatur | 0C to +70C (C grade) | — |
| Gehäuse | SOIC-8 | SOIC (D), 8 pins |
| Montageart | Surface Mount | Surface mount |
| Driver Short-Circuit Protection | Yes, current-limited | — |
| Thermisches Abschalten | Yes | — |
| ESD Protection (bus pins) | [DATA_NEEDED: ESD rating] | — |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | Differential bus transceiver |
| Supported Standards | — | TIA/EIA-422-B and TIA/EIA-485-A |
| ITU Recommendations | — | V.11 and X.27 |
| Communication Mode | — | Bidirectional |
| Bus Architecture | — | Multipoint transmission |
| Transmission Line Type | — | Balanced transmission lines |
| Driver Output State | — | 3-state |
| Receiver Output State | — | 3-state |
| Betriebstemperaturbereich | — | 0 °C to 70 °C |
| Pin-Anzahl | — | 8 pins |
| Manufacturer | — | Texas Instruments |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| Input and Output Electrical Limits | — | [DATA_NEEDED: input and output electrical limits] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Ruhestrom | — | [DATA_NEEDED: quiescent current] |