STM32F767IIT6 vs STM32H745IIT6 Comparison
Detailed side-by-side comparison of STM32F767IIT6 by STMicroelectronics and STM32H745IIT6 by STMicroelectronics. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
STMicroelectronics
STM32F767IIT6 - 216MHz Cortex-M7 MCU 2MB Flash | STMicroelectronics
STM32F767IIT6 ✓ ActiveSTMicroelectronics
STM32H745IIT6 - 480MHz Dual-Core M7/M4 MCU, 2MB Flash | ST
STM32H745IIT6 ✓ ActiveSpecification Comparison
| Parameter | STM32F767IIT6 | STM32H745IIT6 |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Category | Microcontrollers | Microcontrollers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $11.95 | $10.62 |
| Core | ARM Cortex-M7 32-bit RISC with FPU | — |
| Maximum Clock Frequency | 216 MHz | — |
| DMIPS | 462 DMIPS / 2.14 DMIPS/MHz (Dhrystone 2.1) | — |
| DSP Instructions | Yes (single-precision SIMD) | — |
| L1 Cache | 16 KB I-cache + 16 KB D-cache | — |
| ART Accelerator | Yes (0-wait-state Flash execution) | — |
| Flash Memory | 2 MB | 2 MB (dual-bank, with secure sector) |
| SRAM | 512 KB | — |
| Package | 176-pin LQFP (24x24 mm) | 176-pin LQFP (24x24 mm) |
| Supply Voltage (VDD) | 1.7 V to 3.6 V | — |
| Operating Temperature | -40 C to +85 C | — |
| USB | 2x USB OTG (FS + HS with on-chip PHY) | — |
| CAN | 2x CAN 2.0B | — |
| Ethernet | 10/100 MAC (MII/RMII) | — |
| SDMMC | 2x SDMMC | — |
| SPI / I2S | 6x SPI (2 with I2S) | — |
| I2C | 3x I2C | — |
| USART/UART | 4x USART + 2x UART | — |
| ADC | 3x 12-bit, up to 2.4 MSPS | 16-bit ADC (3.6 MSPS) + two 12-bit ADCs |
| DAC | 2x 12-bit | Two 12-bit DACs |
| Timers | 12x 16-bit + 2x 32-bit | Advanced-control, general-purpose, basic, low-power timers (see datasheet for full list) |
| Crypto/Hash | AES-128/192/256, SHA-1/2, MD5, HMAC | — |
| Graphics | TFT LCD controller, JPEG codec, Chrom-ART DMA2D | — |
| Mounting Type | Surface Mount | Surface Mount |
| MSL Level | 3 (168 hours) | 3 (per JEDEC J-STD-020) |
| RoHS Status | Compliant | Compliant |
| Core Architecture | — | Dual-core Arm Cortex-M7 + Cortex-M4 with FPU |
| M7 Maximum Clock Frequency | — | 480 MHz |
| M4 Maximum Clock Frequency | — | 240 MHz |
| SRAM (Total) | — | 1 MB (192 KB DTCM/AXI + 64 KB DTCM for M4 + 462 KB system SRAM + 4 KB backup) |
| Operating Voltage Range | — | 1.62 V to 3.6 V |
| Operating Temperature Range | — | -40 °C to +85 °C (industrial grade) |
| Graphics Accelerator | — | Chrom-ART (DMA2D) |
| Communication Interfaces | — | USB OTG FS+HS, 2 × CAN FD, Ethernet MAC, SDMMC, 2 × OctoSPI, FMC, USART/UART/SPI/I2C/LPUART |
| Supply Source | — | Internal SMPS + LDO regulators |