STM32F767IIT6 vs STM32H745IIT6 Comparaison
Comparaison détaillée côte à côte de STM32F767IIT6 par STMicroelectronics et STM32H745IIT6 par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
STM32F767IIT6 - 216MHz Cortex-M7 MCU 2MB Flash | STMicroelectronics
STM32F767IIT6 ✓ ActifComparaison des spécifications
| Paramètre | STM32F767IIT6 | STM32H745IIT6 |
|---|---|---|
| Marque | STMicroelectronics | STMicroelectronics |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $11,95 | $10,62 |
| Core | ARM Cortex-M7 32-bit RISC with FPU | — |
| Fréquence d'horloge maximale | 216 MHz | — |
| DMIPS | 462 DMIPS / 2.14 DMIPS/MHz (Dhrystone 2.1) | — |
| DSP Instructions | Yes (single-precision SIMD) | — |
| L1 Cache | 16 KB I-cache + 16 KB D-cache | — |
| ART Accelerator | Yes (0-wait-state Flash execution) | — |
| Flash Memory | 2 MB | 2 MB (dual-bank, with secure sector) |
| SRAM | 512 KB | — |
| Boîtier | 176-pin LQFP (24x24 mm) | 176-pin LQFP (24x24 mm) |
| Supply Voltage (VDD) | 1.7 V to 3.6 V | — |
| Température de fonctionnement | -40 C to +85 C | — |
| USB | 2x USB OTG (FS + HS with on-chip PHY) | — |
| CAN | 2x CAN 2.0B | — |
| Ethernet | 10/100 MAC (MII/RMII) | — |
| SDMMC | 2x SDMMC | — |
| SPI / I2S | 6x SPI (2 with I2S) | — |
| I2C | 3x I2C | — |
| USART/UART | 4x USART + 2x UART | — |
| ADC | 3x 12-bit, up to 2.4 MSPS | 16-bit ADC (3.6 MSPS) + two 12-bit ADCs |
| DAC | 2x 12-bit | Two 12-bit DACs |
| Timers | 12x 16-bit + 2x 32-bit | Advanced-control, general-purpose, basic, low-power timers (see datasheet for full list) |
| Crypto/Hash | AES-128/192/256, SHA-1/2, MD5, HMAC | — |
| Graphics | TFT LCD controller, JPEG codec, Chrom-ART DMA2D | — |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 3 (168 hours) | 3 (per JEDEC J-STD-020) |
| Statut RoHS | Compliant | Compliant |
| Core Architecture | — | Dual-core Arm Cortex-M7 + Cortex-M4 with FPU |
| M7 Maximum Clock Frequency | — | 480 MHz |
| M4 Maximum Clock Frequency | — | 240 MHz |
| SRAM (Total) | — | 1 MB (192 KB DTCM/AXI + 64 KB DTCM for M4 + 462 KB system SRAM + 4 KB backup) |
| Operating Voltage Range | — | 1.62 V to 3.6 V |
| Plage de température de fonctionnement | — | -40 °C to +85 °C (industrial grade) |
| Graphics Accelerator | — | Chrom-ART (DMA2D) |
| Communication Interfaces | — | USB OTG FS+HS, 2 × CAN FD, Ethernet MAC, SDMMC, 2 × OctoSPI, FMC, USART/UART/SPI/I2C/LPUART |
| Supply Source | — | Internal SMPS + LDO regulators |