TAS5613PHD vs TAS5615PHD Comparison
Detailed side-by-side comparison of TAS5613PHD by Texas Instruments and TAS5615PHD by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
TAS5613PHD - 150W Stereo Class-D Power Stage | Texas Instruments
TAS5613PHD ✓ ActiveTexas Instruments
TAS5615PHD - 300W Mono Class-D Power Stage | Texas Instruments
TAS5615PHD ✓ ActiveSpecification Comparison
| Parameter | TAS5613PHD | TAS5615PHD |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Stereo Class-D analog-input audio power stage | — |
| Maximum Stereo Output Power | 150 W | 160 W |
| Maximum Mono Output Power | 300 W | 300 W |
| Power-Supply Operating Range | 18 V to 38 V | — |
| Analog Input Range | 10.8 V to 13.2 V | — |
| Signal Bandwidth | Up to 80 kHz | — |
| Total Harmonic Distortion | 0.03% at 1 W into 4 ohms | <0.03% |
| Power-Supply Rejection Ratio | 80 dB in BTL configuration without an input signal | — |
| Signal-to-Noise Ratio | >100 dB, A-weighted | — |
| Channel Configuration | 1-channel mono or 2-channel stereo | — |
| Feedback Architecture | Integrated feedback | Integrated PurePath HD closed-loop feedback |
| Input Architecture | Analog input | Analog input |
| Startup and Shutdown Behavior | Click-and-pop-free | — |
| Package | 64-pin HTQFP, 14 mm x 14 mm | 64-pin HTQFP with exposed pad, 14 mm x 14 mm |
| Mounting Type | Surface mount | Surface mount |
| Pin Compatibility | Compatible with TAS5630, TAS5615, and TAS5611 families | — |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Thermal Resistance | [DATA_NEEDED: thermal resistance] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Amplifier Type | — | Class-D audio power amplifier |
| Speaker Load | — | 8 ohm |
| Power-Stage Supply | — | 50 V |
| Supported Output Configuration | — | 1-channel mono, 2-channel stereo, or 4-channel stereo |
| Evaluation Module | — | TAS5615PHD2EVM |
| Recommended 12 V Supply Type | — | Low-noise, low-output-impedance voltage regulator |
| Power-Stage Rail Requirement | — | Low output impedance and low noise |
| Protection Functions | — | [DATA_NEEDED: protection functions] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance] |