TAS5613PHD vs TAS5615PHD Comparaison
Comparaison détaillée côte à côte de TAS5613PHD par Texas Instruments et TAS5615PHD par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
TAS5613PHD - 150W Stereo Class-D Power Stage | Texas Instruments
TAS5613PHD ✓ ActifComparaison des spécifications
| Paramètre | TAS5613PHD | TAS5615PHD |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Stereo Class-D analog-input audio power stage | — |
| Maximum Stereo Output Power | 150 W | 160 W |
| Maximum Mono Output Power | 300 W | 300 W |
| Power-Supply Operating Range | 18 V to 38 V | — |
| Analog Input Range | 10.8 V to 13.2 V | — |
| Signal Bandwidth | Up to 80 kHz | — |
| Total Harmonic Distortion | 0.03% at 1 W into 4 ohms | <0.03% |
| Power-Supply Rejection Ratio | 80 dB in BTL configuration without an input signal | — |
| Signal-to-Noise Ratio | >100 dB, A-weighted | — |
| Channel Configuration | 1-channel mono or 2-channel stereo | — |
| Feedback Architecture | Integrated feedback | Integrated PurePath HD closed-loop feedback |
| Input Architecture | Analog input | Analog input |
| Startup and Shutdown Behavior | Click-and-pop-free | — |
| Boîtier | 64-pin HTQFP, 14 mm x 14 mm | 64-pin HTQFP with exposed pad, 14 mm x 14 mm |
| Type de montage | Surface mount | Surface mount |
| Pin Compatibility | Compatible with TAS5630, TAS5615, and TAS5611 families | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Résistance thermique | [DATA_NEEDED: thermal resistance] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Amplifier Type | — | Class-D audio power amplifier |
| Speaker Load | — | 8 ohm |
| Power-Stage Supply | — | 50 V |
| Supported Output Configuration | — | 1-channel mono, 2-channel stereo, or 4-channel stereo |
| Evaluation Module | — | TAS5615PHD2EVM |
| Recommended 12 V Supply Type | — | Low-noise, low-output-impedance voltage regulator |
| Power-Stage Rail Requirement | — | Low output impedance and low noise |
| Protection Functions | — | [DATA_NEEDED: protection functions] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance] |