TAS5613PHD vs TAS5615PHD So sánh
So sánh chi tiết song song của TAS5613PHD bằng Texas Instruments và TAS5615PHD bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
TAS5613PHD - 150W Stereo Class-D Power Stage | Texas Instruments
TAS5613PHD ✓ Hoạt độngTexas Instruments
TAS5615PHD - 300W Mono Class-D Power Stage | Texas Instruments
TAS5615PHD ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | TAS5613PHD | TAS5615PHD |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Product Type | Stereo Class-D analog-input audio power stage | — |
| Maximum Stereo Output Power | 150 W | 160 W |
| Maximum Mono Output Power | 300 W | 300 W |
| Power-Supply Operating Range | 18 V to 38 V | — |
| Analog Input Range | 10.8 V to 13.2 V | — |
| Signal Bandwidth | Up to 80 kHz | — |
| Total Harmonic Distortion | 0.03% at 1 W into 4 ohms | <0.03% |
| Power-Supply Rejection Ratio | 80 dB in BTL configuration without an input signal | — |
| Signal-to-Noise Ratio | >100 dB, A-weighted | — |
| Channel Configuration | 1-channel mono or 2-channel stereo | — |
| Feedback Architecture | Integrated feedback | Integrated PurePath HD closed-loop feedback |
| Input Architecture | Analog input | Analog input |
| Startup and Shutdown Behavior | Click-and-pop-free | — |
| Hộp | 64-pin HTQFP, 14 mm x 14 mm | 64-pin HTQFP with exposed pad, 14 mm x 14 mm |
| Kiểu lắp đặt | Surface mount | Surface mount |
| Pin Compatibility | Compatible with TAS5630, TAS5615, and TAS5611 families | — |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Kháng nhiệt | [DATA_NEEDED: thermal resistance] | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Amplifier Type | — | Class-D audio power amplifier |
| Speaker Load | — | 8 ohm |
| Power-Stage Supply | — | 50 V |
| Supported Output Configuration | — | 1-channel mono, 2-channel stereo, or 4-channel stereo |
| Evaluation Module | — | TAS5615PHD2EVM |
| Recommended 12 V Supply Type | — | Low-noise, low-output-impedance voltage regulator |
| Power-Stage Rail Requirement | — | Low output impedance and low noise |
| Protection Functions | — | [DATA_NEEDED: protection functions] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance] |