TAS5615PHD vs TAS5613PHD Comparison
Detailed side-by-side comparison of TAS5615PHD by Texas Instruments and TAS5613PHD by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
TAS5615PHD - 300W Mono Class-D Power Stage | Texas Instruments
TAS5615PHD ✓ ActiveTexas Instruments
TAS5613PHD - 150W Stereo Class-D Power Stage | Texas Instruments
TAS5613PHD ✓ ActiveSpecification Comparison
| Parameter | TAS5615PHD | TAS5613PHD |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | Class-D audio power amplifier | — |
| Input Architecture | Analog input | Analog input |
| Feedback Architecture | Integrated PurePath HD closed-loop feedback | Integrated feedback |
| Maximum Stereo Output Power | 160 W | 150 W |
| Maximum Mono Output Power | 300 W | 300 W |
| Speaker Load | 8 ohm | — |
| Power-Stage Supply | 50 V | — |
| Total Harmonic Distortion | <0.03% | 0.03% at 1 W into 4 ohms |
| Supported Output Configuration | 1-channel mono, 2-channel stereo, or 4-channel stereo | — |
| Package | 64-pin HTQFP with exposed pad, 14 mm x 14 mm | 64-pin HTQFP, 14 mm x 14 mm |
| Mounting Type | Surface mount | Surface mount |
| Evaluation Module | TAS5615PHD2EVM | — |
| Recommended 12 V Supply Type | Low-noise, low-output-impedance voltage regulator | — |
| Power-Stage Rail Requirement | Low output impedance and low noise | — |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Protection Functions | [DATA_NEEDED: protection functions] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance] | — |
| Product Type | — | Stereo Class-D analog-input audio power stage |
| Power-Supply Operating Range | — | 18 V to 38 V |
| Analog Input Range | — | 10.8 V to 13.2 V |
| Signal Bandwidth | — | Up to 80 kHz |
| Power-Supply Rejection Ratio | — | 80 dB in BTL configuration without an input signal |
| Signal-to-Noise Ratio | — | >100 dB, A-weighted |
| Channel Configuration | — | 1-channel mono or 2-channel stereo |
| Startup and Shutdown Behavior | — | Click-and-pop-free |
| Pin Compatibility | — | Compatible with TAS5630, TAS5615, and TAS5611 families |
| Thermal Resistance | — | [DATA_NEEDED: thermal resistance] |
| RoHS Status | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |