TAS5615PHD vs TAS5613PHD 비교

다음의 상세 나란히 비교: TAS5615PHD 제조: Texas Instruments 및 TAS5613PHD 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

Texas Instruments
TAS5615PHD TAS5615PHD - 300W Mono Class-D Power Stage | Texas Instruments

TAS5615PHD - 300W Mono Class-D Power Stage | Texas Instruments

TAS5615PHD ✓ 활성

사양 비교

파라미터 TAS5615PHD TAS5613PHD
브랜드 Texas Instruments Texas Instruments
카테고리 Amplifier ICs Amplifier ICs
수명 주기 상태 활성 활성
Amplifier Type Class-D audio power amplifier —
Input Architecture Analog input Analog input
Feedback Architecture Integrated PurePath HD closed-loop feedback Integrated feedback
Maximum Stereo Output Power 160 W 150 W
Maximum Mono Output Power 300 W 300 W
Speaker Load 8 ohm —
Power-Stage Supply 50 V —
Total Harmonic Distortion <0.03% 0.03% at 1 W into 4 ohms
Supported Output Configuration 1-channel mono, 2-channel stereo, or 4-channel stereo —
패키지 64-pin HTQFP with exposed pad, 14 mm x 14 mm 64-pin HTQFP, 14 mm x 14 mm
실장 유형 Surface mount Surface mount
Evaluation Module TAS5615PHD2EVM —
Recommended 12 V Supply Type Low-noise, low-output-impedance voltage regulator —
Power-Stage Rail Requirement Low output impedance and low noise —
동작 온도 범위 [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Protection Functions [DATA_NEEDED: protection functions] —
RoHS Compliance [DATA_NEEDED: RoHS compliance] —
REACH Compliance [DATA_NEEDED: REACH compliance] —
Product Type — Stereo Class-D analog-input audio power stage
Power-Supply Operating Range — 18 V to 38 V
Analog Input Range — 10.8 V to 13.2 V
Signal Bandwidth — Up to 80 kHz
Power-Supply Rejection Ratio — 80 dB in BTL configuration without an input signal
Signal-to-Noise Ratio — >100 dB, A-weighted
Channel Configuration — 1-channel mono or 2-channel stereo
Startup and Shutdown Behavior — Click-and-pop-free
Pin Compatibility — Compatible with TAS5630, TAS5615, and TAS5611 families
열 저항 — [DATA_NEEDED: thermal resistance]
RoHS 상태 — [DATA_NEEDED: RoHS status]
REACH Status — [DATA_NEEDED: REACH status]

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청