TAS5615PHD vs TAS5613PHD So sánh
So sánh chi tiết song song của TAS5615PHD bằng Texas Instruments và TAS5613PHD bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
TAS5615PHD - 300W Mono Class-D Power Stage | Texas Instruments
TAS5615PHD ✓ Hoạt độngTexas Instruments
TAS5613PHD - 150W Stereo Class-D Power Stage | Texas Instruments
TAS5613PHD ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | TAS5615PHD | TAS5613PHD |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Amplifier Type | Class-D audio power amplifier | — |
| Input Architecture | Analog input | Analog input |
| Feedback Architecture | Integrated PurePath HD closed-loop feedback | Integrated feedback |
| Maximum Stereo Output Power | 160 W | 150 W |
| Maximum Mono Output Power | 300 W | 300 W |
| Speaker Load | 8 ohm | — |
| Power-Stage Supply | 50 V | — |
| Total Harmonic Distortion | <0.03% | 0.03% at 1 W into 4 ohms |
| Supported Output Configuration | 1-channel mono, 2-channel stereo, or 4-channel stereo | — |
| Hộp | 64-pin HTQFP with exposed pad, 14 mm x 14 mm | 64-pin HTQFP, 14 mm x 14 mm |
| Kiểu lắp đặt | Surface mount | Surface mount |
| Evaluation Module | TAS5615PHD2EVM | — |
| Recommended 12 V Supply Type | Low-noise, low-output-impedance voltage regulator | — |
| Power-Stage Rail Requirement | Low output impedance and low noise | — |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Protection Functions | [DATA_NEEDED: protection functions] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance] | — |
| Product Type | — | Stereo Class-D analog-input audio power stage |
| Power-Supply Operating Range | — | 18 V to 38 V |
| Analog Input Range | — | 10.8 V to 13.2 V |
| Signal Bandwidth | — | Up to 80 kHz |
| Power-Supply Rejection Ratio | — | 80 dB in BTL configuration without an input signal |
| Signal-to-Noise Ratio | — | >100 dB, A-weighted |
| Channel Configuration | — | 1-channel mono or 2-channel stereo |
| Startup and Shutdown Behavior | — | Click-and-pop-free |
| Pin Compatibility | — | Compatible with TAS5630, TAS5615, and TAS5611 families |
| Kháng nhiệt | — | [DATA_NEEDED: thermal resistance] |
| Trạng thái RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |