TCA4311D vs TCA4311ADR Comparison

Detailed side-by-side comparison of TCA4311D by Texas Instruments and TCA4311ADR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Texas Instruments
TCA4311D TCA4311D - 2.7-5.5V Hot-Swappable I2C Buffer | TI

TCA4311D - 2.7-5.5V Hot-Swappable I2C Buffer | TI

TCA4311D ✓ Active
Texas Instruments
TCA4311ADR TCA4311ADR - 2.7-5.5V I2C/SMBus Buffer | Texas Instruments

TCA4311ADR - 2.7-5.5V I2C/SMBus Buffer | Texas Instruments

TCA4311ADR ✓ Active

Specification Comparison

Parameter TCA4311D TCA4311ADR
Brand Texas Instruments Texas Instruments
Category Interface ICs Interface ICs
Lifecycle Status Active Active
Product Type 2-bit bidirectional I2C/SMBus buffer Hot-swappable 2-wire bus buffer
Supply Voltage Range 2.7 V to 5.5 V —
Maximum Bus Frequency 400 kHz —
Number of Buffered Bits 2 bits —
Signal Direction Bidirectional —
Supported Buses I2C and SMBus —
Hot-Swap Support Yes, hot-swappable —
Enable Control EN pin; low enables shutdown mode —
Connection Status Output Open-drain READY output —
Connected Buses When READY Is High SDAIN to SDAOUT and SCLIN to SCLOUT —
I2C Maximum Bus Capacitance 400 pF —
SMBus Capacitance Restriction None specified by SMBus, subject to rise-time and fall-time limits —
Package 8-pin SOIC, 0.154 inch wide, 3.90 mm 8-pin SOIC (D)
Mounting Type Surface mount Surface mount
Operating Temperature Range [DATA_NEEDED: operating temperature range] -40 °C to +85 °C
Supply Current [DATA_NEEDED: supply current] —
Propagation Delay [DATA_NEEDED: propagation delay] —
Quiescent Current [DATA_NEEDED: quiescent current] —
RoHS Status [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
Operating Power-Supply Voltage Range — 2.7 V to 5.5 V
Maximum I2C/SMBus Frequency — 400 kHz
Channel Count — 1 channel
Buffered Signal Count — 2 bits
Bidirectional Data Transfer — Supported on SDA and SCL
Hot-Swappable Operation — Supported
Precharge Voltage — 1 V on SDA and SCL
Supported Bus — I2C/SMBus
Logic Voltage — 3.3 V or 5 V
Shipping Form — Tape and reel
RoHS Compliance — [DATA_NEEDED: RoHS compliance status]
REACH Compliance — [DATA_NEEDED: REACH compliance status]

Datasheets & Resources

Browse All Products Create BOM Request Quote