TCA4311D vs TCA4311ADR Comparación

Comparación detallada lado a lado de TCA4311D por Texas Instruments y TCA4311ADR por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.

Texas Instruments
TCA4311D TCA4311D - 2.7-5.5V Hot-Swappable I2C Buffer | TI

TCA4311D - 2.7-5.5V Hot-Swappable I2C Buffer | TI

TCA4311D ✓ Activo
Texas Instruments
TCA4311ADR TCA4311ADR - 2.7-5.5V I2C/SMBus Buffer | Texas Instruments

TCA4311ADR - 2.7-5.5V I2C/SMBus Buffer | Texas Instruments

TCA4311ADR ✓ Activo

Comparación de especificaciones

Parámetro TCA4311D TCA4311ADR
Marca Texas Instruments Texas Instruments
Categoría Interface ICs Interface ICs
Estado del ciclo de vida Activo Activo
Product Type 2-bit bidirectional I2C/SMBus buffer Hot-swappable 2-wire bus buffer
Supply Voltage Range 2.7 V to 5.5 V —
Maximum Bus Frequency 400 kHz —
Number of Buffered Bits 2 bits —
Signal Direction Bidirectional —
Supported Buses I2C and SMBus —
Hot-Swap Support Yes, hot-swappable —
Enable Control EN pin; low enables shutdown mode —
Connection Status Output Open-drain READY output —
Connected Buses When READY Is High SDAIN to SDAOUT and SCLIN to SCLOUT —
I2C Maximum Bus Capacitance 400 pF —
SMBus Capacitance Restriction None specified by SMBus, subject to rise-time and fall-time limits —
Encapsulado 8-pin SOIC, 0.154 inch wide, 3.90 mm 8-pin SOIC (D)
Tipo de montaje Surface mount Surface mount
Rango de temperatura de funcionamiento [DATA_NEEDED: operating temperature range] -40 °C to +85 °C
Corriente de alimentación [DATA_NEEDED: supply current] —
Propagation Delay [DATA_NEEDED: propagation delay] —
Corriente en reposo [DATA_NEEDED: quiescent current] —
Estado RoHS [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
Operating Power-Supply Voltage Range — 2.7 V to 5.5 V
Maximum I2C/SMBus Frequency — 400 kHz
Channel Count — 1 channel
Buffered Signal Count — 2 bits
Bidirectional Data Transfer — Supported on SDA and SCL
Hot-Swappable Operation — Supported
Precharge Voltage — 1 V on SDA and SCL
Supported Bus — I2C/SMBus
Logic Voltage — 3.3 V or 5 V
Shipping Form — Tape and reel
RoHS Compliance — [DATA_NEEDED: RoHS compliance status]
REACH Compliance — [DATA_NEEDED: REACH compliance status]

Hojas de datos y recursos

Examinar todos los productos Crear BOM Solicitar cotización