TCA4311D vs TCA4311ADR Karşılaştırma

Ayrıntılı yan yana karşılaştırma TCA4311D tarafından Texas Instruments ve TCA4311ADR tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Texas Instruments
TCA4311D TCA4311D - 2.7-5.5V Hot-Swappable I2C Buffer | TI

TCA4311D - 2.7-5.5V Hot-Swappable I2C Buffer | TI

TCA4311D ✓ Aktif
Texas Instruments
TCA4311ADR TCA4311ADR - 2.7-5.5V I2C/SMBus Buffer | Texas Instruments

TCA4311ADR - 2.7-5.5V I2C/SMBus Buffer | Texas Instruments

TCA4311ADR ✓ Aktif

Özellik Karşılaştırması

Parametre TCA4311D TCA4311ADR
Marka Texas Instruments Texas Instruments
Kategori Interface ICs Interface ICs
Yaşam Döngüsü Durumu Aktif Aktif
Product Type 2-bit bidirectional I2C/SMBus buffer Hot-swappable 2-wire bus buffer
Supply Voltage Range 2.7 V to 5.5 V —
Maximum Bus Frequency 400 kHz —
Number of Buffered Bits 2 bits —
Signal Direction Bidirectional —
Supported Buses I2C and SMBus —
Hot-Swap Support Yes, hot-swappable —
Enable Control EN pin; low enables shutdown mode —
Connection Status Output Open-drain READY output —
Connected Buses When READY Is High SDAIN to SDAOUT and SCLIN to SCLOUT —
I2C Maximum Bus Capacitance 400 pF —
SMBus Capacitance Restriction None specified by SMBus, subject to rise-time and fall-time limits —
Paket 8-pin SOIC, 0.154 inch wide, 3.90 mm 8-pin SOIC (D)
Montaj Türü Surface mount Surface mount
İşletim Sıcaklığı Aralığı [DATA_NEEDED: operating temperature range] -40 °C to +85 °C
Besleme Akımı [DATA_NEEDED: supply current] —
Propagation Delay [DATA_NEEDED: propagation delay] —
Durağan Akım [DATA_NEEDED: quiescent current] —
RoHS Durumu [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
Operating Power-Supply Voltage Range — 2.7 V to 5.5 V
Maximum I2C/SMBus Frequency — 400 kHz
Channel Count — 1 channel
Buffered Signal Count — 2 bits
Bidirectional Data Transfer — Supported on SDA and SCL
Hot-Swappable Operation — Supported
Precharge Voltage — 1 V on SDA and SCL
Supported Bus — I2C/SMBus
Logic Voltage — 3.3 V or 5 V
Shipping Form — Tape and reel
RoHS Compliance — [DATA_NEEDED: RoHS compliance status]
REACH Compliance — [DATA_NEEDED: REACH compliance status]

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin