TL072CP vs TS922IN Comparison
Detailed side-by-side comparison of TL072CP by Texas Instruments and TS922IN by STMicroelectronics. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
TL072CP - Dual JFET-Input Low-Noise Op Amp, 8-PDIP | Texas Instruments
TL072CP ✓ ActiveSpecification Comparison
| Parameter | TL072CP | TS922IN |
|---|---|---|
| Brand | Texas Instruments | STMicroelectronics |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Manufacturer | Texas Instruments | — |
| Part Status | Active | — |
| Amplifier Type | JFET-Input Operational Amplifier | Dual operational amplifier |
| Number of Circuits | 2 (Dual) | — |
| Slew Rate | 13 V/µs (typical) | 1 V/µs |
| Gain Bandwidth Product | 3 MHz (typical) | — |
| Input Bias Current | 30 pA (typical) | — |
| Input Offset Voltage | 3 mV (typical, C grade) | [DATA_NEEDED: TS922IN input offset voltage] |
| Input Noise Voltage Density | 18 nV/√Hz (typical at 1 kHz) | — |
| Total Harmonic Distortion | 0.003% (typical) | — |
| Supply Voltage Range (Dual) | ±3.5 V to ±18 V | — |
| Supply Voltage Range (Single) | 7 V to 36 V | — |
| Operating Temperature Range | 0°C to +70°C (C grade) | [DATA_NEEDED: operating temperature range] |
| Package / Case | 8-PDIP (Plastic DIP, through-hole) | — |
| Mounting Type | Through Hole | Through-hole |
| Pin Count | 8 | — |
| Output Short-Circuit Protection | Yes | — |
| Internal Frequency Compensation | Yes | — |
| Latch-up Free Operation | Yes | — |
| RoHS Status | Compliant | unknown |
| Number of Channels | — | 2 channels |
| Architecture | — | BiCMOS |
| Input Type | — | Rail-to-rail input |
| Output Type | — | Rail-to-rail output |
| Supply Voltage Range | — | 2.7 V to 12 V |
| Optimized Supply Voltage | — | 3 V and 5 V |
| Gain-Bandwidth Product | — | 4 MHz |
| Maximum Output Current | — | 80 mA |
| Input Noise Density | — | 9 nV/√Hz |
| Low Input Offset Voltage | — | 900 µV maximum for TS922A |
| ESD Internal Protection | — | 2 kV |
| Package | — | 8-pin Mini DIP |
| REACH Status | — | unknown |