TL072CP vs TS922IN Vergleich
Detaillierter Direktvergleich von TL072CP von Texas Instruments und TS922IN von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
TL072CP - Dual JFET-Input Low-Noise Op Amp, 8-PDIP | Texas Instruments
TL072CP ✓ AktivSpezifikationsvergleich
| Parameter | TL072CP | TS922IN |
|---|---|---|
| Marke | Texas Instruments | STMicroelectronics |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Manufacturer | Texas Instruments | — |
| Part Status | Active | — |
| Amplifier Type | JFET-Input Operational Amplifier | Dual operational amplifier |
| Number of Circuits | 2 (Dual) | — |
| Slew Rate | 13 V/µs (typical) | 1 V/µs |
| Gain Bandwidth Product | 3 MHz (typical) | — |
| Input Bias Current | 30 pA (typical) | — |
| Input Offset Voltage | 3 mV (typical, C grade) | [DATA_NEEDED: TS922IN input offset voltage] |
| Input Noise Voltage Density | 18 nV/√Hz (typical at 1 kHz) | — |
| Total Harmonic Distortion | 0.003% (typical) | — |
| Supply Voltage Range (Dual) | ±3.5 V to ±18 V | — |
| Supply Voltage Range (Single) | 7 V to 36 V | — |
| Betriebstemperaturbereich | 0°C to +70°C (C grade) | [DATA_NEEDED: operating temperature range] |
| Gehäuse / Bauform | 8-PDIP (Plastic DIP, through-hole) | — |
| Montageart | Through Hole | Through-hole |
| Pin-Anzahl | 8 | — |
| Output Short-Circuit Protection | Yes | — |
| Internal Frequency Compensation | Yes | — |
| Latch-up Free Operation | Yes | — |
| RoHS-Status | Compliant | unknown |
| Number of Channels | — | 2 channels |
| Architecture | — | BiCMOS |
| Input Type | — | Rail-to-rail input |
| Ausgangstyp | — | Rail-to-rail output |
| Supply Voltage Range | — | 2.7 V to 12 V |
| Optimized Supply Voltage | — | 3 V and 5 V |
| Gain-Bandwidth Product | — | 4 MHz |
| Maximaler Ausgangsstrom | — | 80 mA |
| Input Noise Density | — | 9 nV/√Hz |
| Low Input Offset Voltage | — | 900 µV maximum for TS922A |
| ESD Internal Protection | — | 2 kV |
| Gehäuse | — | 8-pin Mini DIP |
| REACH Status | — | unknown |