TL072CP vs TS922IN Comparaison
Comparaison détaillée côte à côte de TL072CP par Texas Instruments et TS922IN par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
TL072CP - Dual JFET-Input Low-Noise Op Amp, 8-PDIP | Texas Instruments
TL072CP ✓ ActifComparaison des spécifications
| Paramètre | TL072CP | TS922IN |
|---|---|---|
| Marque | Texas Instruments | STMicroelectronics |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Manufacturer | Texas Instruments | — |
| Part Status | Active | — |
| Amplifier Type | JFET-Input Operational Amplifier | Dual operational amplifier |
| Number of Circuits | 2 (Dual) | — |
| Slew Rate | 13 V/µs (typical) | 1 V/µs |
| Gain Bandwidth Product | 3 MHz (typical) | — |
| Input Bias Current | 30 pA (typical) | — |
| Input Offset Voltage | 3 mV (typical, C grade) | [DATA_NEEDED: TS922IN input offset voltage] |
| Input Noise Voltage Density | 18 nV/√Hz (typical at 1 kHz) | — |
| Total Harmonic Distortion | 0.003% (typical) | — |
| Supply Voltage Range (Dual) | ±3.5 V to ±18 V | — |
| Supply Voltage Range (Single) | 7 V to 36 V | — |
| Plage de température de fonctionnement | 0°C to +70°C (C grade) | [DATA_NEEDED: operating temperature range] |
| Boîtier / Format | 8-PDIP (Plastic DIP, through-hole) | — |
| Type de montage | Through Hole | Through-hole |
| Nombre de broches | 8 | — |
| Output Short-Circuit Protection | Yes | — |
| Internal Frequency Compensation | Yes | — |
| Latch-up Free Operation | Yes | — |
| Statut RoHS | Compliant | unknown |
| Number of Channels | — | 2 channels |
| Architecture | — | BiCMOS |
| Input Type | — | Rail-to-rail input |
| Type de sortie | — | Rail-to-rail output |
| Supply Voltage Range | — | 2.7 V to 12 V |
| Optimized Supply Voltage | — | 3 V and 5 V |
| Gain-Bandwidth Product | — | 4 MHz |
| Courant de sortie maximal | — | 80 mA |
| Input Noise Density | — | 9 nV/√Hz |
| Low Input Offset Voltage | — | 900 µV maximum for TS922A |
| ESD Internal Protection | — | 2 kV |
| Boîtier | — | 8-pin Mini DIP |
| REACH Status | — | unknown |