Platinen & Module
Unterkategorien
Produkte (235)
ATNGW100 - AVR32 AP7000 Network Gateway Eval Board | Microchip
The Microchip Technology ATNGW100 is a network gateway evaluation board built around the AVR32 AT32AP7000 (also supporting AT32AP7001 and AT32AP7002) 32-bit AVR MCU/MPU, shipped as a complete kit containing the board plus a Linux development and debug toolchain. An embedded evaluation board is a printed circuit assembly that exposes the key peripherals of a target microcontroller or microprocessor so engineers can prototype firmware, drivers, and complete applications before committing to custom hardware. Evaluation boards sit at the top of the embedded development hierarchy: semiconductor -> MCU/MPU -> development kit -> application firmware. They typically integrate power regulation, clocking, debug connectors, memory, and network or USB interfaces. Key features of the ATNGW100 include the high-performance AVR32 AP7000 core, integrated build scripts for the toolchain, Linux kernel, boot loader, libraries, and applications, and a configuration system that is easily adaptable to custom boards. Because Linux and the complete toolchain are bundled, teams can move from unboxing to running an embedded Linux network gateway without lengthy host setup. Architecturally, the AP7000 family is a 32-bit AVR32 RISC processor designed by Atmel (now Microchip) for high-throughput embedded control and networking. The ATNGW100 board demonstrates this processor in a network gateway role, where its peripheral set and Linux support enable routing, bridging, and protocol-conversion workloads. The supplied build scripts produce reproducible, optimized system images that can be trimmed for production targets. Typical applications include embedded Linux gateway prototyping, AVR32 AP7000 firmware evaluation, industrial network bridge development, and academic embedded-systems teaching labs that need a complete Linux-capable platform. Design consideration: treat the ATNGW100 as a development platform, not a production module. When migrating to custom hardware, reuse the board files and build-script outputs, then verify boot-loader and kernel configuration against your own memory map and peripheral usage. This page synthesizes distributor availability, verified specification excerpts, and practical selection guidance for the ATNGW100 that is not consolidated on any single manufacturer or distributor page.
ATNGW100MKII - AVR32 AP7000 Network Gateway Eval Board | Microchip
The Microchip Technology ATNGW100MKII is a 32-bit embedded evaluation board for the AVR32 UC3 family, based on the AT32AP7000, AT32AP7001, or AT32AP7002 AVR32 MCU and designed as the second-generation Network Gateway (NGW) reference platform with Ethernet connectivity and JTAG debugging support. Note: the original Atmel datasheet set carries a Product End-of-Life (EOL) notification, and the platform status is obsolete, with remaining stock available from independent distributors. An embedded MCU evaluation board is a ready-to-use printed circuit assembly that hosts a target microcontroller plus the supporting power, clock, memory, debug, and communication circuitry needed to begin software development immediately. In the product hierarchy it sits under development tools -> evaluation boards and kits -> embedded MCU and DSP evaluation boards, bridging the gap between a bare microcontroller datasheet and a production-locked custom PCB. Key features of the ATNGW100MKII center on the AVR32 architecture, a 32-bit RISC core family originally developed by Atmel and inherited by Microchip Technology. The platform supports the AT32AP7000, AT32AP7001, and AT32AP7002 application processors, integrates Ethernet networking hardware, and provides a JTAG interface for on-chip debugging and flash programming, which makes it a natural fit for Linux-class gateway and industrial networking designs. Technically, the AP7000-series devices combine the AVR32 RISC core with on-chip peripherals suited to communication equipment, including Ethernet MAC, USB, and serial interfaces as implemented on the board. The NGW100 mkII iteration refined the original Network Gateway board layout, and the published Atmel document set includes a product overview datasheet plus the EOL notification that defines last-time-buy conditions for the platform. Typical applications include network gateway prototyping, embedded Linux porting and driver development, industrial automation nodes, and academic teaching of 32-bit RISC embedded systems. The onboard Ethernet and JTAG make the board usable out of the box for both application code and low-level bootloader work. A key design consideration is lifecycle planning: because the platform is formally EOL/obsolete, new designs should treat the ATNGW100MKII as a maintenance and prototyping tool rather than a long-term production reference, and should budget for last-time-buy stock. This page synthesizes distributor availability, datasheet links, lifecycle status, and drop-in-replacement guidance for the ATNGW100MKII not found on any single manufacturer or distributor page.
ATR0635-EK1 - ANTARIS4 GPS Eval Kit SuperSense | Microchip
The Microchip (Atmel) ATR0635-EK1 is an evaluation kit for the ANTARIS4 single-chip GPS receiver with SuperSense indoor and autonomous acquisition technology, delivering 2.5 m CEP accuracy, 34 s cold-start time to first fix, and -158 dBm tracking sensitivity. A single-chip GPS receiver integrates the complete RF front end, baseband correlators, and navigation processor into one die, sitting within the GNSS receiver hierarchy of RF ICs and location-based positioning ICs. Evaluation kits such as the ATR0635-EK1 provide the hardware platform for firmware development, prototyping, and engineering validation of the target receiver IC before volume design-in. Key features include an 8192 search-bin acquisition engine with GPS acquisition accelerator, SuperSense weak-signal tracking for indoor operation, and high isolation between GPS and cellular bands as noted by Atmel for mobile coexistence. The ANTARIS4 architecture yields acquisition sensitivity of -142 dBm at cold start with an external LNA, and tracking sensitivity of -158 dBm. The ANTARIS4 platform uses an active continuous acquisition approach that maintains full-sky search capability while tracking, reducing reacquisition time after signal blockage. The receiver supports stand-alone 2D positioning at 2.5 m CEP and outputs standard NMEA data over UART for host integration. Typical applications include portable navigation devices, mobile handsets (where the kit verifies GPS/cellular coexistence isolation), asset trackers, and automotive telematics prototypes. Design consideration: use the evaluation kit to measure actual TTFF and sensitivity on your specific antenna and PCB stack-up before committing to the ATR0635 for production, since kit results with an active antenna may exceed your final passive-antenna performance. This page synthesizes verified datasheet figures, distributor stock references, and family-level alternative guidance not consolidated in the manufacturer datasheet.
ATR0981-EK - 400-500MHz UHF SiGe Front-End Eval Board | Microchip
The Microchip Technology ATR0981-EK is an evaluation board (front-end kit) for the ATR0981 UHF SiGe front-end IC, covering the 400 MHz to 500 MHz frequency range and supplied with one populated demonstration board. An RF front-end evaluation kit is a hardware development tool that lets engineers exercise a radio-frequency integrated circuit outside of a custom PCB design. In the RF signal-chain hierarchy, the ATR0981 itself is a monolithic transmit/receive front-end built on Atmel's (now Microchip's) advanced silicon-germanium (SiGe) process, and the -EK suffix denotes the board-level companion product used to characterize, prototype, and validate designs around that IC before committing to production layouts. Key attributes of this kit include support for the 300 MHz to 500 MHz operating range of the ATR0981 die (with the board itself specified at 400 MHz to 500 MHz), the SiGe front-end technology that delivers low noise and good linearity for sub-GHz radios, and RoHS-compliant, lead-free construction. The kit exposes the transmit and receive front-end functions of the IC for measurement with standard RF test equipment such as spectrum analyzers and vector network analyzers. The ATR0981 is a monolithic IC manufactured using Atmel's advanced SiGe technology; it performs a transmit and receive front-end function dedicated to the 300 MHz to 500 MHz band. SiGe bipolar processes provide high transition frequency (fT) devices, which translate into useful gain and low noise figure at UHF frequencies where CMOS front-ends typically struggle. This makes the part attractive for battery-powered sub-GHz ISM-band radio designs such as meters, telemetry links, and remote-keyless-entry style systems. Typical applications include prototyping 400-500 MHz TX/RX front-ends for short-range industrial telemetry, RF link budget characterization for sub-GHz sensor nodes, and lab evaluation of SiGe front-end performance ahead of custom PCB integration. A key design consideration is that board-level RF performance (return loss, gain, noise figure) depends on the evaluation board layout; results are only transferable to a custom design if equivalent controlled-impedance RF layout practices are reproduced. This page synthesizes distributor listings, datasheet references, and practical engineering context not found on the manufacturer product page alone.
ATR2406-DEV-BOARD - 2.4GHz ISM RF Transceiver Eval Board | Microchip
The Microchip Technology ATR2406-DEV-BOARD is an RF evaluation and development board for the ATR2406 Smart RF single-chip 2.4GHz ISM band transceiver, featuring GFSK modulation at data rates up to 1152 kbits/s, typical receive sensitivity of -93 dBm thanks to an integrated LNA, and typical output power of +4 dBm. The board exposes the full capability of the ATR2406 transceiver IC, which is packaged in a 32-pin QFN and integrates an image-rejection mixer, low-IF filter, FM demodulator, RSSI, TX preamplifier, power-ramping generator for an external power amplifier, an integrated synthesizer, and a fully integrated VCO. An RF evaluation and development board is a printed circuit assembly that lets engineers evaluate, prototype, and validate a radio IC without designing a custom RF layout. Within the system hierarchy, it sits in the development tools layer above the semiconductor itself: transceiver IC -> Smart RF product family -> RF evaluation and development kits/boards -> development boards, kits and programmers. Such boards shortens time-to-market by providing proven RF matching networks, decoupling, and firmware hooks. Key features of the ATR2406-DEV-BOARD platform include a fully integrated low-IF receiver, a fully integrated GFSK modulator supporting data rates up to 1152 kbits/s, high sensitivity of typically -93 dBm due to the integrated low-noise amplifier, and multi-channel operation across 95 channels with frequency-hopping support. These characteristics suit short-range cable-replacement links in the globally available 2.4GHz ISM band. On the technical side, Atmel's (now Microchip's) reference design pairs the ATR2406 transceiver with the ATmega88 AVR microcontroller, implementing proprietary Smart RF firmware with adaptive frequency hopping for robust proprietary wireless links. The low-IF architecture reduces external component count because channel filtering and demodulation happen on-chip, while the RSSI output enables link-quality monitoring and channel scoring in the frequency-hopping protocol. Typical applications include wireless cable replacement, proprietary 2.4GHz sensor links, game controllers and human interface devices, and low-cost industrial telemetry where a certified proprietary stack is preferred over Bluetooth. The 95-channel plan and frequency-hopping firmware improve coexistence with Wi-Fi and other 2.4GHz traffic. Design consideration: since the ATR2406 relies on an external power amplifier option via its power-ramping generator, developers should budget antenna matching and PA biasing early; RF layout on the dev board is tuned, so copying its stackup is recommended. Note that the board and its target IC are legacy/obsolete devices, so new designs should verify lifecycle status. This page synthesizes distributor listings, the Atmel/Microchip datasheet, and the ATR2406/ATmega88 reference design documentation into a single resource with design notes and sourcing context not found on standard catalog pages.
ATR2406-DEV-BOARD2 - 2.4GHz Smart RF Eval Board | Microchip
The Microchip Technology ATR2406-DEV-BOARD2 is a 2.4 GHz ISM band Smart RF transceiver evaluation board built around the ATR2406 low-IF GFSK transceiver and the T7024 companion device, delivering typically -93 dBm receive sensitivity, typically +4 dBm output power, and data rates up to 1152 kbit/s across 95 channels. An RF evaluation board is a hardware development platform that lets engineers test and validate a wireless transceiver IC before committing to a custom PCB design. Within the product hierarchy, it sits under development boards, kits and programmers, then RF development tools, then wireless/ISM evaluation platforms. Evaluation boards typically expose the RF IC, its supporting passives, antenna matching network, and an on-board microcontroller so the entire physical layer can be exercised out of the box. Key features of this platform include a fully integrated low-IF receiver with integrated LNA, a fully integrated GFSK modulator supporting data rates up to 1152 kbit/s, and multi-channel operation across 95 channels in the 2.4 GHz ISM band. The high sensitivity of typically -93 dBm, achieved thanks to the integrated LNA, directly extends link budget, while the typically +4 dBm output power supports cable-replacement range targets. Technically, the board pairs the ATR2406 Smart RF transceiver with an ATmega88 AVR microcontroller, matching Microchip's ISM reference design (document doc4624), whose proprietary Smart RF firmware implements adaptive frequency hopping for robust cable-replacement links. This combination allows designers to evaluate both the analog RF performance and the full protocol stack in one setup. Typical applications include 2.4 GHz proprietary wireless links, cable replacement, wireless sensor and industrial control prototyping, and RF education platforms. Design consideration: evaluate link margin at your target data rate, since sensitivity degrades as data rate increases. This page synthesizes distributor pricing, availability, reference-design context, and practical evaluation guidance not found in the manufacturer datasheet alone. Pricing data referenced as of 2026-09-19.
ATR2406-DEV-KIT - 2.4GHz ISM GFSK Transceiver Eval Kit | Microchip
The Microchip Technology ATR2406-DEV-KIT is an RF evaluation and development kit for the ATR2406 low-IF 2.4 GHz ISM band transceiver, featuring fully integrated GFSK modulation supporting data rates up to 1152 kbits/s, typical receiver sensitivity of -93 dBm, and typical output power of +4 dBm. An RF transceiver evaluation kit is a complete hardware-and-firmware platform that lets engineers prototype, test, and validate wireless designs before committing to PCB production. In the wireless development hierarchy, a dev kit (board-level platform) sits above the bare IC and below end products, bundling evaluation boards, power supplies, firmware, and design files into a single package. Key features of the underlying ATR2406 include a fully integrated low-IF receiver, a fully integrated GFSK modulator, an integrated LNA delivering -93 dBm typical sensitivity, multi-channel operation across 95 channels, and a QFN32-packaged single-chip transceiver with image-rejection mixer, low-IF filter, FM demodulator, RSSI, TX preamplifier, power-ramping generator for an external power amplifier, integrated synthesizer, and fully integrated VCO and TX filter. The kit architecture pairs the ATR2406 transceiver with the ATmega88 flash microcontroller in a reference design documented in Microchip application note doc4624. According to Microchip, the related ATR2406-DEV-KIT2 ships with two ATR2406/ATmega88 boards, two battery packs, AAA batteries, and a CD-ROM containing firmware and manufacturing data including Gerber files, plus adaptive frequency-hopping firmware. The original ATR2406-DEV-KIT evaluation kit also includes a large LCD display and demonstration and testing firmware. Typical applications include 2.4 GHz ISM-band wireless links, wireless keyboard/mouse and consumer remote control links, industrial telemetry, and low-cost proprietary RF protocol prototyping. The 95-channel capability supports frequency-hopping implementations for coexistence in congested ISM spectrum. Design consideration: the ATR2406 TX preamplifier includes a power-ramping generator intended to drive an external power amplifier, so plan the output stage matching network and regulatory spurious-emission filtering around your regional 2.4 GHz ISM limit. This page synthesizes distributor availability, related-kit cross references, and practical design guidance not consolidated in the manufacturer datasheet.
ATR2406-DEV-KIT2 - 2.4GHz GFSK RF Eval Kit | Microchip
The Microchip Technology ATR2406-DEV-KIT2 is a complete evaluation and development kit for the ATR2406 Low-IF 2.4 GHz ISM band GFSK transceiver paired with the ATmega88 8-bit AVR microcontroller, providing an out-of-the-box platform for 2.4 GHz cable-replacement and short-range wireless prototyping. A development kit is a hardware platform that combines the target device (in this case a 2.4 GHz RF transceiver), a host controller, PCB antennas or RF matching networks, and programming interfaces into a single board, allowing engineers to evaluate RF link performance, develop firmware, and validate designs before committing to custom PCB layouts. Development kits sit at the top of the embedded design hierarchy: silicon -> evaluation module -> full development kit -> production design. Key features of the underlying ATR2406 transceiver include a fully integrated low-IF receiver with integrated LNA delivering typical sensitivity of -93 dBm, a fully integrated GFSK modulator supporting data rates up to 1152 kbit/s, and typical output power of +4 dBm. The transceiver supports multi-channel operation across 95 channels in the 2.4 GHz ISM band, giving flexibility for frequency-hopping or multi-network deployments. The reference design based on ATR2406 and ATmega88, documented in Microchip/Atmel application note doc4624, addresses cost-effective and flexible cable-replacement solutions and offers a complete solution enabling fast time-to-market cycles. Firmware development and debugging are performed through the ATmega88's standard AVR programming interfaces, letting teams port existing AVR codebases directly. Typical applications include 2.4 GHz wireless cable replacement, point-to-point and star-topology sensor links, consumer remote controls, and RF link characterization during design-in of the ATR2406 silicon. A key design consideration: RF performance figures such as the -93 dBm sensitivity are transceiver datasheet values; real-world range on the kit board depends on antenna matching and enclosure, so validate link budget with your own antennas. This page synthesizes distributor availability, datasheet feature data, and procurement guidance not consolidated on the manufacturer site. Pricing is quotation-based as of 2026-09-19.
ATR2434-DEV-BOARD - 2.4GHz ISM RF Eval Board | Microchip
The Microchip Technology ATR2434-DEV-BOARD is a Smart RF evaluation and development board for the ATR2434 2.4 GHz ISM-band radio transceiver, supplied as a complete kit with board, software, and documentation. An RF evaluation and development board is a hardware platform that lets engineers prototype, test, and validate wireless designs before committing to custom PCB layout. In the product hierarchy, it belongs to development tools supporting RF transceivers, which combine a radio front end, a modem, and a baseband in one device. Evaluation boards typically expose all key signals, antenna connectors, and configuration interfaces so the target IC can be exercised under real operating conditions. The underlying ATR2434 device contains a 2.4 GHz radio transceiver, a GFSK modem, and a dual DSSS reconfigurable baseband. Both radio and baseband are code- and frequency-agile: 49 Gold spreading codes are supported across 78 1-MHz channels, yielding a theoretical spectral capacity of 3822 channels and a communication range of up to 50 meters or more. A four-wire SPI interface connects the transceiver to an application MCU and supports single-byte and multi-byte serial transfers. Typical applications include ISM-band wireless sensor networks, proprietary 2.4 GHz data links, remote control and telemetry systems, and evaluation of DSSS/GFSK modulation schemes for short-range communication. When working with this board, note the compliance status: it is listed as containing lead and RoHS non-compliant, so it should be treated as an engineering evaluation tool rather than a production reference for RoHS-restricted products. This page consolidates distributor availability, verified datasheet references, and compliance data for the ATR2434-DEV-BOARD in one place, adding sourcing and compliance context not found in the manufacturer documentation alone.
ATR2732-40-EK2 - DAB Digital Processing Eval Kit | Microchip
The Microchip Technology ATR2732-40-EK2 is a DAB (Digital Audio Broadcasting) digital processing evaluation kit bundling the ATR2732 baseband/decoder device with the ATR2740 companion device on a media-box evaluation platform. It is classified by distributors as an Audio IC Development Tool and RF Evaluation and Development Kit, providing engineers with a hardware platform to evaluate DAB digital signal processing, decoding, and media playback functionality prior to committing to a production design. An evaluation kit (EVK) is a pre-assembled hardware development platform that lets designers exercise a target device's full feature set without fabricating a custom PCB. In the power-management and audio-signal-chain hierarchy, such kits sit at the top of the design flow: device selection is followed by evaluation-board prototyping, firmware development, and finally custom board bring-up. The ATR2732-40-EK2 serves that first stage for the Microchip (formerly ATR/Hibred) ATR2732 + ATR2740 DAB chipset. Key elements of the kit include the ATR2732 DAB digital processing IC, the ATR2740 companion device, and supporting board infrastructure per the Microchip media box/eval tool description published by distributors such as Mouser and DigiKey. The '-40-' designation in the part number denotes the device speed grade family, and the 'EK2' suffix identifies the second-generation evaluation kit hardware revision. Typical applications include DAB radio receiver prototyping, automotive infotainment front-end development, digital radio media player evaluation, and RF/baseband signal-path characterization. Because the board integrates both chipset members, engineers can evaluate the complete receive chain from RF front-end (ATR2740) through digital audio processing (ATR2732). Designers should obtain the current kit user guide from Microchip directly, since detailed board schematics, connector pinouts, and bill-of-materials are documented in Microchip's official evaluation-kit documentation rather than distributor listings. This page synthesizes distributor inventory data, cross-reference search results, and practical sourcing guidance not found on the manufacturer's own product pages.
ATR2732-40DEV-KIT1 - DAB/COM Front-End Eval Kit | Microchip
The Microchip Technology ATR2732-40DEV-KIT1 is an RF evaluation and development kit for the ATR2732/ATR2740 digital radio front-end family, covering the 1.452 GHz to 1.492 GHz frequency band used for Common Ensemble (COM) and DAB/DAB+ digital audio broadcasting reception. The kit, categorized by distributors as an Audio IC Development Tool, provides the hardware platform needed to evaluate front-end receiver performance for DAB receivers integrated into automotive, consumer, and professional audio products. An RF evaluation kit of this type belongs to the broader hierarchy of development boards and modules: it is a development board tool, specifically an RF evaluation and development kit, used to prototype and validate a receiver front-end IC before committing to a custom PCB design. Evaluation kits typically expose the RF inputs, power rails, and control interfaces (such as SPI or I2C) of the target device so engineers can measure sensitivity, blocking, adjacent-channel rejection, and audio output quality. Key characteristics of the ATR2732-40DEV-KIT1 include support for the ATR2740 and ATR2732 front-end devices, operation across the 1.452 GHz to 1.492 GHz DAB Band III L-band adjacent frequency range associated with the COM ensemble, and its role as a complete evaluation platform rather than a bare IC. Because it is a kit, its 'package' is a board-level assembly with connectors and test points rather than a semiconductor package. Typical applications include DAB/DAB+ radio receiver development, digital radio front-end sensitivity characterization, firmware and tuner-control driver development, and EMC or antenna-matching experimentation in automotive infotainment and consumer radio designs. A key design consideration: confirm that your host system can supply the required control interface and power to the board, and consult the Microchip ATR2732/ATR2740 documentation for register-level control of the front-end during evaluation. This page synthesizes distributor listings, verified specifications, and sourcing guidance for the ATR2732-40DEV-KIT1 in one place - information normally spread across Mouser, DigiKey, and third-party distributor sites.
ATR2820-DEMOBOARD - 5.8GHz RF Demo Board | Microchip
The Microchip Technology ATR2820-DEMOBOARD is a demonstration and reference-design board for the 5.8 GHz ATR2820 Low IF WDCT (Wireless Deskphone Certificate) transceiver, categorized by distributors as BOARD DEMO REF DESIGN 5.8GHZ. The board is designed by Aculab and is based on transceiver architecture, utilizing a 32-bit processor to process data and software from the microcontroller. A demonstration board (demo board) is a printed circuit board platform that lets engineers evaluate an integrated circuit's performance before committing to a custom PCB design. In the product hierarchy, demo boards sit within RF development tools: evaluation platform -> reference design -> RF transceiver system -> wireless product development. The ATR2820 itself is an Atmel/Microchip (originally Micrel heritage) low-IF 5.8 GHz transceiver targeted at WDCT cordless telephony in the license-free 5.8 GHz ISM band. Key characteristics of this evaluation platform include the 5.8 GHz RF reference design operating in the unlicensed ISM band, an integrated 32-bit processor for baseband and protocol handling, and a complete RF front-end layout that has been tuned by the manufacturer so users do not need to replicate RF matching-network design work. Because the RF section of a 5.8 GHz design is highly layout-sensitive, starting from this verified reference design substantially reduces development risk. Technically, the low-IF architecture converts the incoming 5.8 GHz signal down to a low intermediate frequency, which simplifies filtering and demodulation compared with zero-IF approaches while avoiding DC-offset problems. The onboard microcontroller executes the protocol stack, demonstrating a complete link from RF front end to digital data. Typical applications include WDCT cordless-phone development, 5.8 GHz ISM-band wireless data links, RF prototyping, and lab evaluation of the ATR2820 transceiver for new product feasibility. A key design consideration: the ATR2820 is a legacy part line, so verify long-term silicon availability before committing a production design; this board is primarily an evaluation tool, not a manufacturing platform. This page synthesizes distributor stock data, sourcing links, and practical evaluation guidance not found in a single manufacturer datasheet.
ATR2820-DEV-BOARD2 - 5.8GHz RF Eval Kit | Microchip
The Microchip Technology ATR2820-DEV-BOARD2 is a 5.8 GHz RF reference-design evaluation kit (KIT DESIGN RF 5.8GHZ COM-DCT) containing two boards - an ATR2820 RF Demo Board and a USB RF Interface Board - for evaluating the ATR2820 transceiver in receiver and transmitter modes at 5.8 GHz. An RF evaluation board is a printed-circuit hardware platform that lets engineers exercise a radio-frequency IC without designing their own PCB first. Within the development-tool hierarchy (RF IC -> evaluation board -> development kit -> reference design), such boards expose the device's key pins, jumpers, and connectors so parameters such as link quality, data rate, and sensitivity can be measured directly with standard lab equipment. Key features include operation in both receiver and transmitter roles at 5.8 GHz, a two-board kit topology that separates the device-under-test from the USB host interface, and jumper-controlled configuration. Per the board's evaluation documentation, jumper JP8 switches the on-board PRBS (pseudo-random binary sequence) generator on and off, jumpers JP9 and JP10 select the reference crystal, JP11 selects the data rate between 1.152 Mbps and 576 kbps, and JP12 exposes the output of the internal data generator. The kit is a complete link-evaluation environment: the ATR2820 RF Demo Board carries the transceiver and its RF front-end, while the USB RF Interface Board connects to a PC USB port, allowing the supplied ATR2820 software to configure registers, transmit test patterns, and log received data. The 1.152 Mbps high-rate mode supports higher-throughput cordless audio and data experiments, while the 576 kbps mode trades speed for link margin. Typical applications include 5.8 GHz cordless system prototyping, wireless audio link evaluation, RF education and laboratory training, and feasibility studies for short-range high-frequency data links based on the ATR2820. A key design consideration: verify reference-crystal selection (JP9/JP10) matches your intended channel plan before range testing, and use the PRBS generator output for BER measurements rather than unstructured traffic. This page synthesizes distributor listings, jumper-level configuration details from the official evaluation-board documentation, and sourcing information not found on a single manufacturer page.
ATR4251-EK - AM/FM Antenna Amplifier Eval Kit | Microchip/Atmel
The Atmel (now Microchip Technology) ATR4251-EK is an evaluation kit for the ATR4251, an integrated low-noise, high-dynamic-range AM/FM antenna amplifier IC with integrated AGC, manufactured in BiCMOS2S technology and designed specifically for automotive car radio applications. An antenna amplifier evaluation kit is a hardware development board that allows RF and automotive audio engineers to benchmark an antenna amplifier IC before committing to a custom PCB design. In the car radio signal chain, the antenna amplifier sits between the passive antenna element (windshield or roof antenna) and the tuner front-end, boosting weak AM and FM signals while maintaining low noise and high linearity. Evaluation kits like the ATR4251-EK belong to the broader hierarchy of RF development tools, evaluation boards, and development kits. The kit showcases the ATR4251's headline features: high dynamic range for both AM and FM reception, integrated automatic gain control (AGC) for AM and FM, a high third-order intercept point (IP3) with adjustable FM amplifier settings, adjustable cable impedance matching, and high second- and third-order intercept points for the AM path. These characteristics minimize intermodulation distortion in strong-signal environments such as dense urban traffic. Technically, the underlying ATR4251 integrates the low-noise amplifier, AGC loops, and biasing in a single BiCMOS2S die, reducing external component count versus discrete antenna amplifier solutions. The AGC automatically reduces gain under strong input signals, preventing overload of downstream tuner stages, while the low noise figure preserves sensitivity for weak-station reception at the edge of coverage. Typical evaluation scenarios include car radio tuner front-end prototyping, windshield and roof active-antenna module design, benchmarking against competing antenna amplifier ICs, and educational RF lab work on AGC behavior. A key design consideration when evaluating this kit is supply and interface compatibility with the target tuner module, as cable impedance matching is adjustable and must be configured to match the measurement or vehicle harness. This page synthesizes distributor pricing, datasheet-derived specifications, application guidance, and sourcing notes not consolidated in the manufacturer datasheet.
ATR4252-EK - AM/FM Active Antenna Evaluation Kit | Microchip
The Microchip Technology ATR4252-EK is an RF evaluation and development kit for the ATR4252, a highly integrated all-in-one active antenna amplifier IC covering AM bands from 150 kHz to 30 MHz and FM bands from 70 MHz to 110 MHz, supplied as antenna amplifier evaluation boards operating from a 10 V supply. An active antenna evaluation board is a hardware development platform that lets engineers exercise every function of an antenna signal-conditioning IC before committing to a production PCB design. In the automotive and consumer radio hierarchy, it sits between the raw datasheet and the final tuned antenna module: passive antennas alone deliver weak signals, so an active amplifier IC such as the ATR4252 boosts and conditions the AM/FM spectrum ahead of the tuner. The kit showcases the ATR4252's headline features: integrated AGC (automatic gain control) for both AM and FM paths, an integrated driver for AM and FM PIN diodes used in antenna switching and diversity, an integrated power supply regulator that simplifies external BOM count, and an integrated antenna sensor for diagnostics. This level of integration means a complete active antenna front end can be built with far fewer external components than discrete transistor-based solutions. Architecturally, the ATR4252 combines separate AM and FM signal chains so each band can be optimized independently - the AM chain handles the long/medium/short-wave spectrum up to 30 MHz while the FM chain covers the 70 MHz to 110 MHz broadcast range. The onboard regulator allows the board to operate from a nominal 10 V supply, matching typical automotive electrical environments. Typical applications validated on this kit include automotive AM/FM roof or glass antenna modules, active antenna combiner units with PIN diode switching, marine and consumer radio front ends, and prototyping of diversity antenna systems. Engineers can measure AGC behavior, antenna detection thresholds, and band gain directly on real hardware. A key design consideration when evaluating is to supply the board from a clean 10 V source, since the integrated regulator's PSRR has limits, and AM-band measurements at 150 kHz require shielding from mains-borne interference. This page synthesizes distributor pricing, datasheet-derived specifications, application guidance, and sourcing notes for the ATR4252-EK that are not consolidated in the manufacturer datasheet.
ATRCB256RFR2 - ATmega256RFR2 2.4GHz 802.15.4 Eval Board | Microchip
The Microchip ATRCB256RFR2 is an ATmega256RFR2 radio controller evaluation board combining an 802.15.4 (Zigbee) 2.4GHz wireless SoC transceiver with an integrated PCB antenna, designed for IEEE 802.15.4 network prototyping and RF performance testing. A wireless radio controller board (RCB) is a development platform that packages a system-on-chip combining an AVR microcontroller with a 2.4GHz IEEE 802.15.4-compliant radio transceiver on a PCB-antenna carrier. Within the development ecosystem hierarchy, it sits under development boards -> wireless evaluation boards -> RF development tools, and it bridges the gap between bare SoC silicon and finished Zigbee/6LoWPAN products. Key features include the ATmega256RFR2 SoC with 256KB flash, an integrated 2.4GHz transceiver compliant with IEEE 802.15.4, and a PCB antenna requiring no external RF matching work from the designer. The board exposes ATmega256RFR2 peripherals for firmware evaluation, allowing developers to measure receiver sensitivity, transmit power, and network stack behavior before committing to custom PCB layouts. Technically, the ATmega256RFR2 integrates an enhanced AVR RISC core with a low-power 2.4GHz radio featuring an RSSI measurement channel, AES hardware security engine, and awake-on-radio functionality for battery-powered mesh nodes. The radio controller board form factor simplifies antenna design since the tuned PCB antenna removes the most error-prone portion of a 2.4GHz layout. Typical applications include Zigbee/802.15.4 mesh network prototyping, RF range and sensitivity characterization, smart energy and home automation node development, and as a reference for custom ATmega256RFR2 hardware designs. The XPRO variant (ATRCB256RFR2-XPRO) extends the same platform into the Xplained Pro modular ecosystem. Design consideration: when translating a reference design from this board to production hardware, replicate the PCB antenna keep-out region and ground-plane geometry exactly, as 2.4GHz antenna performance is highly sensitive to layout deviations. This page synthesizes distributor pricing, board-family alternatives, and practical design notes not found in the manufacturer documentation.
ATRCB256RFR2-XPRO - ATmega256RFR2 Zigbee 2.4GHz Eval Board | Microchip
The Microchip Technology ATRCB256RFR2-XPRO is an Xplained Pro extension evaluation board featuring the ATmega256RFR2 single-chip wireless microcontroller with an integrated 2.4 GHz IEEE 802.15.4 (Zigbee) radio transceiver and PCB antenna. The board provides a complete reference design for evaluating the ATmega256RFR2 wireless MCU family, which combines an 8-bit AVR core with 256 KB of flash memory and a 2.4 GHz transceiver in a single chip. An evaluation board is a hardware development platform that lets engineers assess a semiconductor device's performance before committing to a custom PCB design. In the wireless MCU hierarchy, the ATmega256RFR2 belongs to the IEEE 802.15.4 radio transceiver category, positioned within the broader wireless system-on-chip and Zigbee development tool ecosystem. Evaluation boards typically expose all device peripherals through standard connectors and debugger interfaces. Key features of this board include the Xplained Pro extension connector system, which allows stacking onto any Xplained Pro MCU starter kit or Xplained Pro extension board, onboard PCB antenna for 2.4 GHz operation, and support for the Atmel (now Microchip) software framework including ASF and Zigbee stacks. The Xplained Pro ecosystem provides unified debugging, data streaming via the Data Visualizer tool, and identification of extension boards through on-board EEPROM-based board ID. The ATmega256RFR2 integrates an 8-bit AVR microcontroller core, 256 KB in-system self-programmable flash, an IEEE 802.15.4 compliant 2.4 GHz radio transceiver, and an antenna diversity-capable front end, making it well suited to single-chip Zigbee nodes without external RF components beyond simple matching. Typical applications include Zigbee and IEEE 802.15.4 wireless sensor networks, home automation and smart energy prototyping, RF mesh network evaluation, and embedded wireless connectivity proof-of-concept designs. Developers use the board to measure RF range, link budget, power consumption, and mesh networking behavior before production design. A key design consideration is that the RCB256RFR2-XPRO uses an onboard PCB antenna, so measurements taken on a bench reflect board-integrated antenna performance rather than an external antenna solution; RF range testing should be performed in an open environment away from metal surfaces. This page synthesizes distributor pricing, availability, and practical evaluation guidance for the ATRCB256RFR2-XPRO not consolidated in the manufacturer product page, with verified data from DigiKey, Mouser, LCSC, and Octopart.
ATREB212BSMA-EK - AT86RF212B Sub-GHz RF Eval Board | Microchip
The Microchip (Atmel) ATREB212BSMA-EK is an evaluation kit for the AT86RF212B sub-GHz RF transceiver, operating in the 700 MHz, 800 MHz and 900 MHz ISM bands, with an integrated SMA antenna connector, LNA/PLL loop filter circuitry, and XMEGA CPU support on board. It provides a complete radio platform for rapid prototyping of IEEE 802.15.4-2006/2007 and ZigBee-compatible low-power wireless systems. An RF evaluation board is a hardware development tool that mounts a wireless transceiver together with its mandatory RF front-end components - such as baluns, loop filters, and antenna matching networks - on a ready-to-use PCB. In the system hierarchy, it sits between the bare transceiver IC and a finished product, allowing firmware engineers, RF designers, and stack developers to validate range, sensitivity, and protocol behavior before committing to custom PCB layouts. Evaluation kits like this one remove the burden of RF layout, which is the most common cause of degraded wireless performance in first-pass designs. Key features of the ATREB212BSMA-EK include the AT86RF212B transceiver covering 690 to 960 MHz frequency bands, an on-board LNA (low-noise amplifier) and PLL loop filter network, and an SMA connector for connecting standard gain antennas. The board interfaces to host microcontrollers - typically Atmel AVR XMEGA devices - through a standard SPI link, exposing the transceiver's registers, frame buffers, and AES hardware engine for firmware experimentation. Technically, the AT86RF212B is a high-sensitivity, low-current transceiver supporting data rates suited to IEEE 802.15.4 sub-GHz PHY operation, with integrated received signal strength indication (RSSI), link quality indication (LQI), and an IEEE 802.15.4-compliant AES-128 security module. The SMA-fed antenna path on this kit delivers repeatable RF measurements for conducted and radiated testing, simplifying sensitivity and output-power verification. Typical applications include sub-GHz wireless sensor network prototyping, smart metering and utility telemetry development, industrial automation and control links, and long-range low-data-rate IoT node development. Because sub-GHz propagation outperforms 2.4 GHz in obstacle penetration and range, this kit is favored for evaluation of systems destined for basements, outdoor meters, and rural sensor deployments. A key design consideration: always use a matched antenna rated for the exact operating band (700/800/900 MHz), since an out-of-band or poorly matched antenna can desensitize the LNA front-end and invalidate test results. Also connect the kit to a host MCU board with a clean 3.3 V supply to preserve radio sensitivity. This page synthesizes distributor availability data, datasheet references, related evaluation platform alternatives, and practical design guidance not consolidated in the manufacturer datasheet alone.
ATREB215-XPRO - AT86RF215 Dual-Band RF Eval Board | Microchip
The Microchip ATREB215-XPRO is an Xplained Pro extension (XPRO) evaluation board for the AT86RF215 dual-band IEEE 802.15.4 radio transceiver, covering the sub-1 GHz (700/800/900 MHz) and 2.4 GHz ISM bands. The board plugs directly into any Xplained Pro EXT header, with EXT1 as the primary target, enabling rapid evaluation of the AT86RF215 PHY layer without custom RF hardware design. An evaluation board of this type belongs to the development-tools hierarchy: development board -> evaluation kit -> hardware development tools. Its role is to expose the transceiver's RF front end, SPI control interface, and GPIO signals to a host MCU kit such as the SAM4L Xplained Pro or SAMG55 Xplained Pro, so firmware developers can validate range, sensitivity, and protocol timing before committing to a PCB layout. Key features include the AT86RF215 dual RF transceiver with independent sub-GHz and 2.4 GHz paths, an Xplained Pro standard 20-pin EXT connector, and on-board antenna matching. On the ATREB215-XPRO (non-A) version, the sub-1 GHz RF path uses a muRata DLW21SN900SQ2 balun to convert the differential RFP09/RFN09 signals of the AT86RF215 into a single-ended RF signal and vice versa; this balun is not common to the ATREB215-XPRO-A variant, which is a key hardware difference between the two boards. From a technical perspective, the board integrates the transceiver's supply decoupling, crystal circuitry, and RF matching networks on a validated stack-up, removing one of the largest risk areas in sub-GHz and 2.4 GHz designs: RF layout. The AT86RF215 supports IEEE 802.15.4-2011 PHY modes, making the board suitable for proprietary low-power mesh, 6LoWPAN, and WirelessPBX prototyping. Typical applications include IEEE 802.15.4 / Zigbee PHY evaluation, sub-1 GHz wireless sensor network prototyping, dual-band software-defined radio experiments, and PLC-plus-RF hybrid platforms such as the Microchip SAMG55 + PL460-EK + ATREB215-XPRO-A reference configuration. A practical design tip: always connect the board to an Xplained Pro EXT header with correct pin 1 orientation, and verify the sub-GHz band selection in firmware because the RF front-end components (balun versus direct match) differ between the -XPRO and -XPRO-A versions. This page synthesizes distributor pricing, board-version differences, drop-in alternatives, and practical integration notes not consolidated in the manufacturer user guide.
ATREB231ED-EK - 2.4GHz AT86RF231 RF Eval Kit | Microchip
The Microchip Technology ATREB231ED-EK is a 2.4 GHz RF transceiver evaluation board for the AT86RF231 IEEE 802.15.4 radio, delivered as an RF evaluation and development kit that includes a transceiver evaluation board, microcontroller board(s), cable(s), and accessories with an RS-232 interface. It is designed to demonstrate the unique performance and rich feature set of the 2.4 GHz RF transceiver. An RF evaluation kit is a hardware development tool that lets engineers measure and exercise a radio IC before committing to a custom PCB. In the power-management and wireless hierarchy, it sits above the bare transceiver IC: the AT86RF231 chip provides the IEEE 802.15.4 PHY/MAC radio layer, and the evaluation board exposes its pins, RF port, and control interfaces (here via RS-232) so firmware and RF performance can be validated. Key features include evaluation of the AT86RF231 2.4 GHz transceiver, a pre-flashed performance test application that can be run immediately out of the box, and compatibility with the Atmel Controller Base Board (CBB), which serves as the microcontroller host platform. The kit ships lead-free and RoHS compliant per distributor specification data. Technically, the ATREB231ED-EK supports 802.15.4 Zigbee development: the accompanying application note briefly describes how to set up and run the pre-flashed performance test application included with the Atmel REB231ED evaluation kit, allowing engineers to quantify receiver sensitivity, output power, and packet error rate behavior of the transceiver without writing radio drivers first. Typical applications are IEEE 802.15.4 / Zigbee protocol development, 2.4 GHz RF link characterization, mesh network prototyping for smart energy and building automation, and early firmware bring-up for AT86RF231-based products. A key design consideration: the kit targets evaluation, not production - plan to migrate to the bare AT86RF231 chip or an AT86RF231 Xplained Pro extension board (ATREB233-XPRO) once performance baselines are captured, since the RS-232-based CBB platform is legacy. This page synthesizes distributor listings, datasheet references, family drop-in alternatives, and practical design notes not found on the manufacturer product page alone.
ATREB232ED-EK - AT86RF232 2.4GHz Eval Kit | Microchip
The Microchip Technology ATREB232ED-EK is an RF evaluation and development kit for the AT86RF232 2.4 GHz IEEE 802.15.4 radio transceiver, supplied in a box containing board(s), cable(s), and accessories, with a supply voltage referenced at 3.6V and an operating frequency of 2.4 GHz. The kit is classified under Development Boards, Kits, Programmers - RF Evaluation and Development Kits, Boards. An RF evaluation board is a hardware platform that lets engineers interface a wireless transceiver IC with a microcontroller and host PC so that radio performance, firmware stacks, and networking behavior can be measured before committing to custom PCB designs. Within the development-tool hierarchy, the ATREB232ED-EK belongs to RF evaluation kits -> development boards -> prototyping hardware -> embedded engineering tools. Key features include the AT86RF232 transceiver, a 2.4 GHz IEEE 802.15.4 compliant radio; an extended-evalution (ED) board format supporting transceiver plus microcontroller prototyping; supplied cables and accessories for immediate out-of-box use; and an ECCN classification of 5A002A1. The kit supports evaluation, prototyping, programming, firmware development, device testing, and engineering validation, making it a complete path from bench bring-up to pre-production validation of 2.4 GHz mesh or point-to-point links. Technically, the AT86RF232 integrates a low-IF 2.4 GHz radio with SPI host interface, so the evaluation board exposes the SPI, GPIO, and antenna interfaces needed to characterize sensitivity, output power, and current consumption under real firmware. Engineers typically pair the board with Microchip's ATmega or ARM MCU tools and the BitCloud or IEEE 802.15.4 MAC software stacks to exercise Zigbee-style networks. Typical applications include IEEE 802.15.4 / Zigbee node prototyping, wireless sensor network proof-of-concept, and RF range and sensitivity testing of 2.4 GHz designs prior to layout of the AT86RF232 on a custom board. Design consideration: connect the board via the supplied USB cable and follow Microchip's getting-started flow for the AT86RF232 to ensure correct antenna attachment and supply sequencing before first RF transmission. This page synthesizes distributor availability, cross-reference data, and practical engineering guidance not found in the manufacturer datasheet alone.
ATREB233-XPRO - AT86RF233 2.4GHz Eval Board | Microchip
The Microchip Technology ATREB233-XPRO is an Xplained Pro extension evaluation board for the AT86RF233 2.4 GHz IEEE 802.15.4 radio transceiver, offering SPI access to the transceiver and featuring an on-board ATXMEGA256A3U controller per distributor listings. An RF extension evaluation board is a hardware development platform that plugs into a host MCU kit through a standardized high-speed connector, exposing a radio transceiver's full feature set to firmware developers. In the development-tool hierarchy, the ATREB233-XPRO sits in the RF/wireless development boards and kits category, bridging a microcontroller evaluation kit and an IEEE 802.15.4 LR-WPAN (Low-Rate Wireless Personal Area Network) transceiver so that ZigBee, Thread-class, and proprietary 2.4 GHz stacks can be prototyped without custom PCB work. Key features include the AT86RF233 radio transceiver operating in the globally available 2.4 GHz ISM band, full IEEE 802.15.4 compliance, an Xplained Pro extension connector footprint compatible with any Xplained Pro MCU kit, and an I2C/SPI/UART-capable board architecture reported by distributor parametric data. The board also integrates an ATSHA204 cryptographic authentication device, powered through an IO pin from the host EDBG, with R100 draining capacitor C100 when the MCU board is de-powered, per Microchip's design documentation. From a technical standpoint, the AT86RF233 transceiver provides an SPI slave interface for register and frame access, freeing the host MCU from RF-layer timing. The board is limited modular approved (FCC ID VW4A091887, Atmel Norway AS), which means integrators must obtain separate module approval when used on a final application board - an important regulatory detail noted in the REB233-XPRO user guide (Atmel document 42188). Typical applications include IEEE 802.15.4 / ZigBee stack development, 2.4 GHz mesh network prototyping, RF performance evaluation of the AT86RF233, and wireless sensor node proof-of-concept builds using Atmel/Microchip Xplained Pro kits. Design consideration: budget for modular-approval recertification of your host product, and route the host SPI bus short and clean, since the radio's frame timing depends on fast SPI transactions. This page synthesizes distributor pricing links, cross-reference data, and regulatory details not consolidated in the manufacturer datasheet.
ATREB233SMAD-EK - AT86RF233 2.4GHz RF Eval Kit | Microchip
The Microchip Technology ATREB233SMAD-EK is an RF evaluation and development kit for the AT86RF233 IEEE 802.15.4 2.4 GHz low-power transceiver, combined with an ATxmega256A3 AVR microcontroller controller board, operating from a 1.8 V to 3.6 V supply at the 2.4 GHz ISM band, supplied in bulk packaging with MSL 1 (unlimited) moisture sensitivity. An RF evaluation kit is a hardware platform within the embedded development tools hierarchy (development board -> RF development kit -> wireless development ecosystem) that lets engineers evaluate, prototype and debug a radio transceiver before committing to custom PCB design. The ATREB233SMAD-EK pairs a 2.4 GHz IEEE 802.15.4 LR-WPAN radio extension board with an AVR controller base, so all AT86RF233 radio features can be exercised over a standard microcontroller interface. Key features include the AT86RF233 transceiver supporting IEEE 802.15.4 at 2.4 GHz with high data-rate extensions, an ATxmega256A3 8/16-bit AVR MCU with 256 KB flash as the host controller, a 1.8 V to 3.6 V operating supply range, and SMA antenna connectivity for repeatable RF measurements. The kit demonstrates the unique performance and rich feature set of the 2.4 GHz AT86RF233 radio, including its low current consumption suitable for battery-powered ZigBee-style nodes. Architecturally, the ATxmega256A3 communicates with the AT86RF233 over an SPI interface, using the transceiver's interrupt and GPIO lines for frame timing. This mirrors the final product topology, so firmware written against the kit ports directly to production hardware using the same AT86RF233 device. Typical applications include IEEE 802.15.4 / ZigBee mesh network prototyping, RF4CE remote control development, 6LoWPAN and Thread-style network research, and industrial sensor node evaluation where 2.4 GHz low-power wireless is required. A key design consideration: the 1.8 V to 3.6 V supply range covers two AA cells and Li-ion cells directly, but RF range measurements require the supplied SMA antenna and adequate ground-plane conditions on the evaluation boards. This page synthesizes distributor pricing, cross-reference data, and practical design notes not found in the manufacturer product page.
ATRF231USB-RD - AT86RF231 2.4GHz Eval Board | Microchip
The Microchip (formerly Atmel) ATRF231USB-RD is a 2.4 GHz IEEE 802.15.4 RF transceiver reference-design evaluation board built around the AT86RF231 radio transceiver and the ATSAM3S4BA ARM Cortex-M3 microcontroller, packaged as a USB-stick-form development platform for sub-1 GHz style low-power wireless network prototyping. An RF evaluation board is a hardware development tool that lets engineers test a wireless transceiver's radio performance, stack software, and peripheral interfaces before committing to a custom PCB. In the tool hierarchy, it belongs to the family of development boards and kits, supporting wireless MCU and RF transceiver evaluation for IEEE 802.15.4 / ZigBee-class networks. Key features include the AT86RF231 2.4/2.5 GHz radio transceiver with IEEE 802.15.4 compliance, an on-board ARM Cortex-M3 (ATSAM3S4BA) MCU for protocol handling, USB-stick form factor for direct connection to a PC, and support for programming/debugging via a SAM-ICE JTAG adapter with a standard 20-pin ARM JTAG connector. The board combines the radio front end with an MCU on a single compact design, letting developers evaluate sensitivity, link quality, and MAC-layer behavior using Atmel's published application notes such as AVR2031 (Quick Start Guide), AVR2032 (User Guide), and AVR2030 (Hardware User Manual), which document USB driver installation, JTAG programming, and the board's pin assignment tables. Typical applications include ZigBee and 802.15.4 mesh sensor network prototyping, RF transceiver characterization, firmware development for AT86RF231-based end products, and wireless education/training lab setups. When designing with this board, remember that it is a development tool, not a production component: final products use the AT86RF231 chip itself, so PCB antenna matching and regulatory testing must be redone on the custom design. This page synthesizes distributor availability, related evaluation kit comparisons (ATSAMR21-XPRO, ATWINC1500-XSTK), quick-start guidance, and practical design notes not consolidated in any single manufacturer document.