Integrierte Schaltungen

Unterkategorien

📁 ADC/DAC 3.100+ Produkte 📁 Verstärker-ICs 1.700+ Produkte 📁 Audio-Codecs 18 Produkte 📁 Audio-ICs 2 Produkte 📁 Takt & Timing 640+ Produkte 📁 Comparator ICs 1 Produkte 📁 DSP 1.100+ Produkte 📁 Datenakquise-ICs 2 Produkte 📁 Digitale Potentiometer 4 Produkte 📁 Display-Treiber & -Controller 1 Produkte 📁 FPGA & CPLD 7.100+ Produkte 📁 Schnittstellen-ICs 3.100+ Produkte 📁 LED-Treiber 1 Produkte 📁 Logik-ICs 450+ Produkte 📁 Speicher-ICs 870+ Produkte 📁 Mikrocontroller 20.000+ Produkte 📁 Mikroprozessoren 4 Produkte 📁 Motortreiber 1 Produkte 📁 Sonstiges 1 Produkte 📁 Sensor and Detector Interfaces 1 Produkte 📁 Spezialisierte ICs 15 Produkte 📁 Video-ICs 13 Produkte

Produkte (38.000+)

PIC16F15355-I/SSVAO - 14KB Flash 8-bit MCU, AEC-Q100, SSOP-28 | Microchip
PIC16F15355-I/SSVAO

PIC16F15355-I/SSVAO - 14KB Flash 8-bit MCU, AEC-Q100, SSOP-28 | Microchip

The Microchip PIC16F15355-I/SSVAO is an 8-bit PIC® XLP™ microcontroller built around the PIC16(L)F153xx family architecture, integrating 14KB Flash program memory, 1KB SRAM, and a 32MHz internal oscillator in an automotive-grade 28-pin SSOP package. The automotive suffix "VAO" denotes AEC-Q100 qualification, making this part the preferred choice for safety-relevant automotive ECUs that must operate across -40C to +125C ambient conditions. A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory (Flash), volatile data memory (SRAM), and a mix of digital and analog peripherals. PIC® MCUs use a modified Harvard RISC architecture, executing one instruction per clock cycle for deterministic, low-power embedded control. Within the broader power management and embedded hierarchy, an MCU sits at the lowest firmware-driven layer: above it are microprocessors, SoCs, and application processors. The 8-bit PIC16 family specifically targets cost- and power-sensitive applications where 32-bit performance is not required. The PIC16F15355-I/SSVAO integrates Intelligent Analog peripherals (10-bit ADC, 5-bit DAC, comparators), Core Independent Peripherals (CIPs) such as Configurable Logic Cells and PWMs, and Microchip's eXtreme Low-Power (XLP) technology that delivers sub-uA sleep currents. The 28-pin SSOP footprint with 0.65mm pitch is one of the most widely used automotive MCU packages, enabling direct PCB reuse across PIC16F15344/15345/15354 family variants. Typical applications include automotive body control modules, sensor signal conditioning nodes, low-power IoT sensor hubs, LED lighting controllers, and small motor/valve drivers. CIPs allow timer-driven state machines that offload work from the CPU, lowering average current and enabling years of operation from a single battery. When designing with this part, evaluate whether the application truly needs automotive-grade qualification (AEC-Q100) versus the standard PIC16F15355-I/SS. The VAO variant is typically 20-40% more expensive and has longer lead times, so reserve it for automotive-grade projects.

Angebot Kontakt
PIC16F15355T-E/SSVAO - 14KB Flash 8-bit MCU AEC-Q100 | Microchip
PIC16F15355T-E/SSVAO

PIC16F15355T-E/SSVAO - 14KB Flash 8-bit MCU AEC-Q100 | Microchip

The Microchip PIC16F15355T-E/SSVAO is an 8-bit PIC microcontroller from the PIC16(L)F153XX family featuring 14KB (8K x 14) of Flash program memory and 1KB of SRAM, housed in a 28-pin SSOP package. The device operates at up to 32MHz and integrates intelligent analog peripherals, Core Independent Peripherals (CIPs), and eXtreme Low-Power (XLP) technology for energy-efficient embedded designs. The /VAO suffix designates this variant as an automotive-grade part qualified to the AEC-Q100 standard. An 8-bit microcontroller (MCU) is a small, self-contained computer-on-a-chip that combines a CPU, memory, and peripherals. The PIC16F family belongs to the mid-range PIC architecture lineage, sitting between the baseline PIC10/12/16 families and the higher-performance PIC18/dsPIC families. Modern 8-bit MCUs like the PIC16F15355 integrate sophisticated peripherals such as Configurable Logic Cells (CLC), Complementary Waveform Generators (CWG), and numerically-controlled oscillators that historically required external components. The XLP technology is specifically designed for battery-powered applications, providing sleep currents in the nanoamp range. Key features include 4 PWM channels, a hardware comparator, a 5-bit DAC, a 10-bit ADC, 4 Configurable Logic Cells, a Complementary Waveform Generator, 2 EUSART, and SPI/I2C interfaces. The device supports up to 14KB of self-programmable Flash, 1KB of SRAM, and 256 bytes of EEPROM, giving embedded designers flexibility for both bootloaders and parameter storage. Peripherals such as CLC and CWG allow hardware-implemented state machines and complementary PWM outputs without CPU intervention. The architecture combines the standard PIC16 enhanced mid-range core with peripheral pin select, multiple clock sources, and an instruction set optimized for C-compiled code. The /VAO automotive qualification, combined with the operating temperature range of -40C to +125C, makes this part particularly suited to harsh under-hood and body-electronics environments where consumer-grade parts would fail. The /VAO suffix indicates Microchip's automotive-grade qualification, distinguishing it from the standard PIC16F15355T-I/SSVAO industrial variant. Typical applications include automotive body electronics (seat controllers, mirror adjusters, lighting modules), sensor signal conditioning nodes, low-power IoT end nodes, and human-machine interface (HMI) subsystems where deterministic peripheral operation reduces software complexity. The combination of XLP sleep modes with rapid wake-up also suits battery-backed sensors and remote controls. For designs migrating from older PIC16F1xxx parts, this part provides a transparent upgrade path while adding modern CIP functionality. When designing with this MCU, allocate adequate Flash headroom for bootloader and field-upgrade use cases. Always include decoupling on VDD/VSS per the datasheet's recommended layout and respect the in-circuit debug pinout when allocating PCB space for programming headers.

Angebot Kontakt
PIC16F15355T-I/ML - 14KB Flash 8-bit MCU 32MHz 28-QFN | Microchip
PIC16F15355T-I/ML

PIC16F15355T-I/ML - 14KB Flash 8-bit MCU 32MHz 28-QFN | Microchip

The Microchip Technology PIC16F15355T-I/ML is an 8-bit PIC® microcontroller from the PIC16(L)F153XX family, featuring 14KB (8K x 14 words) of Flash program memory, 1KB of RAM, and an integrated 32MHz internal oscillator, housed in a 28-pin QFN (6x6 mm) package. It combines eXtreme Low-Power (XLP) technology, intelligent analog peripherals, and Core Independent Peripherals (CIPs) for energy-efficient embedded designs. The "T" suffix denotes Tape & Reel packaging, "I" indicates the industrial -40C to +85C operating range, and "/ML" specifies the 28-QFN (6x6) leadless package with an exposed thermal pad. A PIC microcontroller is a Harvard-architecture 8-bit RISC processor family built around a modified instruction set optimized for deterministic real-time control. Within the broader semiconductor hierarchy, a PIC MCU sits under microcontroller -> embedded processor -> integrated circuit. The PIC16F1xxx family adds modern peripherals (CLC, NCO, DSM) to legacy PIC16 cores, enabling sophisticated timing, signal generation, and inter-peripheral logic without CPU intervention - a hallmark of Microchip's CIP philosophy. Key features include up to 32MHz CPU speed with 16 MIPS throughput, 14KB self-programmable Flash with device information area (DIA) and unique device ID, 1KB SRAM, and 256 bytes of EEPROM. Communication peripherals include two EUSART (configurable as RS-232/RS-485 LIN), SPI, and I2C masters/slaves with address masking. Analog integration includes a 10-bit ADC with computation (ADC2) automating averaging, filtering, oversampling, and threshold comparisons, plus a 5-bit and 10-bit DAC, two comparators, and a zero-cross detect. Four Configurable Logic Cells (CLC), a Complementary Waveform Generator (CWG), four 10-bit PWMs, and a Numerically Controlled Oscillator (NCO) provide CIP-driven signal synthesis. The architecture uses a modified PIC16 Harvard core with a 14-bit instruction word and separate 14-bit Flash data path, supported by a hardware interrupt controller and peripheral pin select (PPS) for flexible I/O mapping. The XLP sleep currents and IDLE/DOZE modes make the part suitable for battery-backed and energy-harvesting designs. Typical applications include low-power IoT sensor nodes, home appliances and white goods, LED lighting controllers, battery chargers, automotive body electronics (non-safety), industrial sensor transmitters, and consumer remote controls. The combination of CIPs and 5V tolerance broadens its fit in mixed-signal legacy systems. When designing with this MCU, allocate sufficient Flash for the configuration words and consider using the Code Protection bits to safeguard IP; on 28-QFN layouts, provide thermal vias under the exposed pad to keep junction temperature within the -40C to +85C industrial window.

Angebot Kontakt
PIC16F15355T-I/MV - 8-bit MCU, 14KB Flash, 32MHz, 28-UQFN | Microchip
PIC16F15355T-I/MV

PIC16F15355T-I/MV - 8-bit MCU, 14KB Flash, 32MHz, 28-UQFN | Microchip

The Microchip Technology PIC16F15355T-I/MV is an 8-bit PIC RISC microcontroller with 14KB Flash program memory, 32MHz CPU speed, and a wide 2.5V/3.3V/5V operating voltage range, packaged in a 28-pin UQFN (4x4 mm) with exposed pad for tape-and-reel delivery. The part carries the PIC® XLP™ 16F family designation and integrates Intelligent Analog, Core Independent Peripherals (CIPs), multiple PWMs, temperature sensor, and communication peripherals. Tape-and-reel (T) and industrial temperature range (-40C to +85C) suffixes are reflected in the MPN. An 8-bit PIC microcontroller (MCU) is a single-chip computer built around an 8-bit RISC core. The PIC16F15355 belongs to the PIC® XLP™ (eXtreme Low Power) 16F family within the broader 8-bit PIC microcontroller hierarchy (8-bit PIC -> PIC microcontroller -> microcontroller -> embedded processor -> semiconductor). It executes one instruction per clock cycle, integrates non-volatile Flash program memory plus SRAM, and combines digital I/O, analog, communication, and timing peripherals into one IC to replace discrete logic in embedded designs. Key features include 14KB (8K x 14) Flash program memory, 1KB SRAM, 256 bytes of EEPROM, a 32MHz internal oscillator, four 8-bit timers plus two CCP and two PWM peripherals, a 10-bit ADC with up to 24 channels, two comparators, an 8-bit DAC reference, I2C/SPI/EUSART (LIN-capable) communication, and an integrated temperature indicator. The XLP sleep current of roughly 50 nA and active current in the microampere range make the device well-suited to battery-powered designs. The architecture uses Microchip's enhanced mid-range 8-bit core with a 14-bit instruction word, hardware multiplier, single-cycle hardware stack, and Memory Access Partition (MAP) for code protection. CIP blocks such as Configurable Logic Cells (CLC), Complementary Waveform Generator (CWG), Numerically Controlled Oscillator (NCO), and Zero-Cross Detect (ZCD) allow functions normally handled in firmware to be offloaded to hardware, reducing code size and latency. Typical applications include IoT sensor nodes, low-power wireless sensor hubs, HVAC thermostat controls, battery-powered consumer appliances, automotive body and lighting modules, and small industrial control boards. The wide 2.3V-5.5V VDD range lets the part operate directly from 2xAA cells, a 3.3V regulated rail, or a 5V USB rail. For PCB layout, expose the UQFN-28 thermal pad to a top-layer copper pour stitched with at least 8 thermal vias to the ground plane for thermal dissipation and ground reference. Decouple VDD with a 100 nF X7R ceramic placed within 2 mm of the pin and add a bulk 1-10 uF tantalum or aluminum-polymer capacitor if the source is more than 25 mm away. The MCLR pin must be pulled up to VDD through 10-47 kOhm unless no external reset is desired. This page synthesizes tape-and-reel pricing, same-family PIC drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Angebot Kontakt
PIC16F15355T-I/SS - 14KB Flash 8-bit MCU, 32MHz, SSOP-28 | Microchip
PIC16F15355T-I/SS

PIC16F15355T-I/SS - 14KB Flash 8-bit MCU, 32MHz, SSOP-28 | Microchip

The Microchip Technology PIC16F15355T-I/SS is an 8-bit RISC PIC16 microcontroller with 14KB (8K x 14) Flash program memory and 1KB RAM, housed in a 28-pin SSOP (5.30mm / 0.209in) package and supplied on Tape & Reel. It executes up to 32MHz, integrates Intelligent Analog peripherals, four Core Independent Peripherals (CIPs) including Configurable Logic Cells (CLC) and Complementary Waveform Generator (CWG), four 10-bit PWMs, a comparator, a 5-bit DAC, a 24-channel 10-bit ADC, two EUSART, and SPI/I2C, and is qualified for the eXtreme Low-Power (XLP) family with multiple power-managed sleep modes. Tape-and-reel packaging (T suffix) and the -I industrial temperature grade (-40C to +85C) make this variant the production-ready choice for high-volume surface-mount assembly. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, integrating CPU, Flash, RAM, EEPROM, timers, ADCs, and communication peripherals on one CMOS die. MCUs sit within the broader hierarchy of microcontroller -> embedded controller -> semiconductor -> integrated circuit, and the PIC16 sub-family is Microchip's mid-density XLP line that balances cost, peripheral richness, and ultra-low sleep current for battery-powered and always-on applications. Key features include 25 general-purpose I/O pins, 4 PWM channels, 4 CLC blocks, CWG for complementary outputs, 2 EUSART, SPI/I2C, an on-chip 5-bit DAC, and 24 ADC channels. The XLP architecture provides sub-uA sleep currents with retention and an ultra-low-power wake-up timer, allowing the part to run for years from a single coin cell. Architecturally, the PIC16F15355 combines a 14-bit instruction-word PIC16 core with a 49-instruction set, hardware Multiply, and a deterministic interrupt controller; its Core Independent Peripherals (CLC, CWG, NCO, PWM) can run without the CPU, offloading waveform generation and signal conditioning to dedicated hardware for deterministic latency. Typical applications include battery-powered IoT sensor nodes, low-power wireless sensor platforms, automotive body and HVAC sub-modules, home appliances and white goods, and consumer handheld devices where 14KB Flash, 1KB RAM, and rich CIPs cover the firmware footprint without external components. When designing with this MCU, budget Flash carefully: the 14KB size accommodates typical state-machine firmware, but C-code with printf-style libraries will exhaust it quickly - prefer MISRA-C lite libraries, and reserve the second 256-byte Flash page for the bootloader. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical low-power design notes not found in the manufacturer datasheet.

Angebot Kontakt
PIC16F15356-E/ML - 8-Bit 32MHz MCU, 28KB Flash, 28-QFN | Microchip
PIC16F15356-E/ML

PIC16F15356-E/ML - 8-Bit 32MHz MCU, 28KB Flash, 28-QFN | Microchip

The Microchip PIC16F15356-E/ML is a low-power 8-bit PIC16 microcontroller from the PIC16(L)F153xx family, built around an enhanced mid-range core with 32 MHz operation, 28 KB Flash program memory and 2 KB SRAM, housed in a 28-pin QFN (6x6 mm) package with exposed thermal pad. The device combines eXtreme Low-Power (XLP) technology with Intelligent Analog and Core Independent Peripherals (CIPs), making it suitable for a wide range of battery-powered and sensor-interface designs. An 8-bit microcontroller (MCU) is a compact processor on a single integrated circuit containing a CPU, RAM, Flash program memory, and configurable peripherals. PIC microcontrollers use a Harvard RISC architecture optimized for deterministic interrupt response and low power. The PIC16F153xx family specifically extends the mid-range core with peripheral-rich features for mixed-signal embedded designs, positioning this part at the high end of Microchip's 8-bit portfolio for general-purpose applications. Key features include four 10-bit PWM channels, a 5-bit and 10-bit DAC, comparators with selectable references, a 10-bit ADC, Complementary Waveform Generator (CWG), four Configurable Logic Cells (CLC), and dual EUSART plus SPI/I2C interfaces. These integrated CIPs enable complex waveform, logic, and signal-chain functions without CPU intervention, reducing code size and power consumption. The architecture pairs the enhanced mid-range core (49 instructions, 16-bit instruction width) with nanoWatt XLP sleep modes supporting currents below 1 microamp, plus peripheral module disable to shut down unused peripherals and further reduce active power. Internal 32 MHz and 32 kHz oscillators eliminate external crystal cost in many designs. Typical applications include low-power IoT sensor nodes, home automation controllers, consumer appliance front panels, battery-powered instrumentation, LED lighting control, and industrial sensor interfaces. The wide operating voltage range and rich analog peripherals suit mixed-signal designs where the MCU must both read sensors and drive actuators. When designing with this device, take advantage of the CWG, CLC, and PWM peripherals to offload repetitive tasks from the CPU and minimize active time. Use the nanoWatt XLP sleep modes with peripheral interrupt wake-up to maximize battery life, and verify the QFN thermal pad is soldered to a sufficient copper area for thermal performance under full peripheral load. This page synthesizes distributor pricing, drop-in pin-compatible alternatives within the PIC16F153xx family, and practical design notes that complement the manufacturer datasheet for sourcing and engineering decisions.

Angebot Kontakt
PIC16F15356-E/MX - 28KB Flash 8-bit MCU, 28-UQFN | Microchip
PIC16F15356-E/MX

PIC16F15356-E/MX - 28KB Flash 8-bit MCU, 28-UQFN | Microchip

The Microchip Technology PIC16F15356-E/MX is an 8-bit PIC microcontroller featuring 28KB Flash program memory, 2KB SRAM, and a 32 MHz internal oscillator, housed in a 28-pin UQFN package with the -E extended temperature grade (-40C to +125C). It belongs to the PIC16(L)F153xx family that integrates Intelligent Analog peripherals, Core Independent Peripherals (CIPs), and eXtreme Low-Power (XLP) technology. An 8-bit microcontroller (MCU) is a single-chip computer that combines an 8-bit CPU core, program memory (Flash), data memory (RAM), and integrated peripherals such as timers, ADC, communication interfaces, and GPIO. The PIC16 family uses Microchip's enhanced mid-range RISC architecture with a 14-bit instruction word, providing deterministic interrupt response and simple C-friendly instruction set. Within the broader semiconductor hierarchy, PIC16 sits under Microcontrollers -> Integrated Circuits -> Semiconductors. Key features of the PIC16F15356-E/MX include four 10-bit PWM modules with Complementary Waveform Generator (CWG), a 5-bit DAC, a comparator, Configurable Logic Cells (CLC) for hardware state-machine glue logic, and dual EUSART with SPI and I2C support. The 10-bit ADC delivers up to 17 channels depending on package, and the device operates from 2.3V to 5.5V with XLP idle currents as low as 50 nA typical, making it well-suited for battery-backed sensor nodes. The architecture uses a modified Harvard bus with separate program and data paths, 16-level hardware stack, and 31 interrupt sources with vectored priority. The CIPs (CLC, CWG, NCO) execute logic and waveform tasks without CPU intervention, freeing the core for application code. The device also supports an on-board 32 MHz high-frequency internal oscillator and a 32 kHz low-frequency oscillator for accurate timing without external crystals. Typical applications include low-power IoT sensor nodes, home automation controllers, LED lighting drivers with CWG-based dimming, battery-powered medical wearables, automotive body electronics (with the -MV automotive grade variant), and industrial HMI panels. The combination of CIPs and XLP makes it especially attractive in designs that previously required a 32-bit MCU. When designing with this part, place the VCAP pin decoupling capacitor (typically 0.1 uF ceramic) as close as possible to the IC and follow Microchip's PIC16F153xx PCB layout guidelines. The UQFN package requires thermal pad soldering per IPC-7351 land pattern recommendations. This page consolidates distributor pricing, drop-in alternative cross-references, and practical design notes that are not found in a single source on the manufacturer datasheet, helping procurement and design engineers evaluate the PIC16F15356-E/MX in one place.

Angebot Kontakt
PIC16F15356-E/SO - 28KB Flash 8-bit MCU 32MHz SOIC-28 | Microchip
PIC16F15356-E/SO

PIC16F15356-E/SO - 28KB Flash 8-bit MCU 32MHz SOIC-28 | Microchip

The Microchip PIC16F15356-E/SO is an 8-bit PIC microcontroller in the PIC16F153xx family, featuring 28KB of Flash program memory, 2KB of RAM, and a 32 MHz internal oscillator, housed in a 28-pin SOIC (300 mil) package. It integrates a rich set of Core Independent Peripherals (CIPs) including 4 PWM modules, a 10-bit ADC with Computation (ADC2), a 5-bit/10-bit DAC, comparators, Complementary Waveform Generator (CWG), 4 Configurable Logic Cells (CLC), 2 EUSART, and SPI/I2C communication peripherals. The '-E' suffix indicates an industrial temperature range of -40C to +125C. An 8-bit microcontroller (MCU) is a small computer on a single integrated circuit containing a CPU, memory (Flash for program, SRAM for data, EEPROM for non-volatile storage), and peripherals. Within the taxonomy of semiconductors, an MCU falls under microcontrollers, which sit between discrete logic ICs and more complex 32-bit microprocessors. PIC microcontrollers use a Modified Harvard RISC architecture and are widely used in embedded control applications where deterministic behavior, low power, and integrated peripherals reduce BOM cost and PCB area. Key specifications of the PIC16F15356-E/SO include 32 MHz maximum CPU clock, 28KB (16K x 14 words) Flash program memory, 2KB RAM, 256 bytes of EEPROM, and up to 25 I/O pins. The device operates from 2.3V to 5.5V VDD, with eXtreme Low-Power (XLP) features such as sleep currents below 50 nA typical. The 10-bit ADC supports up to 24 channels depending on package, and the integrated 5-bit DAC enables set-point generation without external components. The PIC16F15356 uses a RISC-based 8-bit core with a hardware multiplier and single-cycle instruction execution at 32 MHz. The CIPs (CLC, CWG, NCO, PWM) execute state-machine operations independently of the CPU, offloading real-time tasks and reducing firmware complexity. eXtreme Low-Power (XLP) technology with nanoWatt XLP and Deep Sleep modes allows battery-powered applications to operate for years on a single cell. The 28-pin SOIC package provides an easy-to-prototype footprint with 0.300 inch body width compatible with hand-soldering and standard development boards. Typical applications include IoT sensor nodes, home appliances, motor control (BLDC, stepper, brushed DC), LED lighting controllers, industrial sensor interfaces, battery-powered instruments, and automotive body electronics (non-safety). It is a common choice as a general-purpose MCU when designers need a balance of analog peripherals, communication interfaces, and low power consumption. When designing with the PIC16F15356-E/SO, ensure that the ICSP/PGD/PGC programming pins are accessible for in-circuit programming, decouple VDD with a 100 nF ceramic capacitor placed within 5 mm of the package, and respect the VDD ramp requirements (50 us minimum rise time) for proper Power-on Reset behavior. Use Microchip's MPLAB X IDE and XC8 compiler for firmware development. This page synthesizes verified distributor pricing, pin-compatible drop-in alternatives, and practical design notes not aggregated on any single distributor page.

Angebot Kontakt
PIC16F15356-E/SP - 8-bit 32MHz 28KB Flash MCU | Microchip
PIC16F15356-E/SP

PIC16F15356-E/SP - 8-bit 32MHz 28KB Flash MCU | Microchip

The Microchip Technology PIC16F15356-E/SP is an 8-bit PIC microcontroller featuring 28KB of Flash program memory, 2KB of RAM, and a maximum CPU clock of 32MHz, packaged in a 28-pin SPDIP (0.300 inch / 7.62mm body) through-hole form factor. It integrates Core Independent Peripherals (CIPs) including four Configurable Logic Cells (CLCs), Complementary Waveform Generator (CWG), 4 PWMs, 2 EUSARTs, SPI/I2C, plus analog blocks such as a 10-bit ADC, 5-bit DAC, and comparator, delivering the Intelligent Analog and CIP combination that defines the PIC16F153xx family. What is a PIC XLP microcontroller? A PIC XLP (eXtreme Low-Power) microcontroller is an 8-bit CMOS MCU family from Microchip Technology engineered for battery-powered and energy-harvesting applications. PIC16F153xx devices sit in the broader PIC MCU taxonomy: 8-bit MCU -> PIC16 family -> enhanced mid-range core -> PIC16F153xx sub-family with CIP and Intelligent Analog integration. The XLP designation indicates the part supports sleep currents in the nanoamp range, making it suitable for applications where quiescent draw dominates battery life. Key features of the PIC16F15356-E/SP include 28KB Flash (16K x 14 words), 2KB SRAM, 256 bytes of EEPROM, four 16-bit PWMs with Complementary Waveform Generator, four Configurable Logic Cells (CLCs) implementing user-defined digital glue logic in hardware, and a peripheral pin select (PPS) mapping scheme that lets designers remap digital peripherals to almost any I/O pin. The device operates from 2.3V to 5.5V across an industrial temperature range of -40C to +125C, supports ICD debugging, and offers a 10-bit ADC with up to 24 channels depending on package. The integrated 5-bit DAC and comparator enable closed-loop analog control without external components. Technical depth: the PIC16F15356 uses the enhanced mid-range 8-bit core with a hardware multiplier and 49 instructions, executes most instructions in one instruction cycle (4 clock cycles), and supports interrupt prioritization with hardware context save/restore. The instruction set is upward compatible with the PIC10/12/16 baseline and enhanced mid-range cores, easing migration from older PIC16 designs. PPS and CLCs effectively replace discrete logic ICs, reducing BOM cost and PCB area. Typical applications include home appliances, industrial sensor nodes, low-power IoT endpoints, motor control (especially with the CWG and 4x PWM block), and battery-powered instruments running from 2x AA cells or coin cells. The 28-pin SPDIP package is preferred for hand prototyping, hobbyist builds, and through-hole manufacturing where wave soldering is required. Design consideration: when migrating from older PIC16F1xxx designs, ensure the PPS register initialization is performed early in the firmware; without PPS unlock sequence the peripherals default to legacy pin assignments and code written assuming PPS flexibility may not function. For low-power designs, switch to sleep and use the device's RTCC, IOC, or CLC wake sources rather than polling loops. This page synthesizes distributor pricing, parametric drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, with cross-references to PIC16F15355/15354 and PIC16F15256 SPDIP variants in the same family.

Angebot Kontakt
PIC16F15356-E/SS - 8-bit 32MHz 28KB Flash MCU | Microchip
PIC16F15356-E/SS

PIC16F15356-E/SS - 8-bit 32MHz 28KB Flash MCU | Microchip

The Microchip Technology PIC16F15356-E/SS is an 8-bit PIC16 microcontroller running at up to 32 MHz with 28 KB of Flash program memory (16K x 14 words) and 2 KB SRAM, packaged in a 28-pin SSOP (SS) form factor. It belongs to the PIC16(L)F153xx family and combines eXtreme Low-Power (XLP) technology with Core Independent Peripherals (CIPs) for energy-efficient embedded designs. The device operates from 1.8 V to 5.5 V across the industrial -40C to +125C temperature range with the -E (Extended) suffix. An 8-bit microcontroller (MCU) is a small computer-on-a-chip built around an 8-bit data path. Within the semiconductor taxonomy, an MCU sits under microcontroller -> embedded processor -> digital IC. PIC16 parts use a Harvard RISC architecture with a 14-bit instruction word optimized for deterministic, low-power control. The CIPs approach lets peripherals (CLC, CWG, NCO, PWM) operate without CPU intervention, lowering active power and freeing the core for application logic. Key differentiating features include four Configurable Logic Cells (CLC), a Complementary Waveform Generator (CWG), two 10-bit DACs, two 10-bit ADCs up to 43 channels, a Numerically Controlled Oscillator (NCO), four 10-bit PWMs, two analog comparators, and 2x EUSART plus 2x MSSP (SPI/I2C) serial interfaces. The XLP idle/doze currents enable battery lifetimes measured in years on coin cells. The PIC16F15356-E/SS is pin-compatible with much of the PIC16F153xx family (e.g., PIC16F15355-E/SS with 14 KB Flash and PIC16F15354-E/SS with 7 KB Flash), enabling firmware migration across memory tiers without PCB rework. Memory is partitioned for bootloader-over-the-air updates and field firmware upgrades, a common requirement in connected sensor nodes. Typical applications include IoT sensor nodes, battery-powered instrumentation, LED lighting controllers, low-cost motor control (small fans, solenoids), home appliance user-interface boards, and automotive body electronics (with the -VAO automotive grade variant). Designers choose this device when they need ample Flash for protocol stacks (BLE through external radio, LoRa, Modbus) plus rich analog peripherals for sensor fusion. When designing with this part, keep in mind that SSOP-28 has limited thermal dissipation at high ambient temperatures. Place a 0.1 uF decoupling capacitor within 2 mm of VDD with a 10 uF bulk capacitor on the supply rail, and route MCLR through a 10 k pull-up. Programming/debug uses ICSP via the PGC/PGD pins, which should be reserved for test access. This page synthesizes distributor pricing, drop-in same-package alternatives, design notes, and datasheet pinout data into a single engineering reference for the PIC16F15356-E/SS.

Angebot Kontakt
PIC16F15356-I/ML - 8-Bit 32MHz MCU, 28KB Flash, 28-QFN | Microchip
PIC16F15356-I/ML

PIC16F15356-I/ML - 8-Bit 32MHz MCU, 28KB Flash, 28-QFN | Microchip

The Microchip Technology PIC16F15356-I/ML is an 8-bit RISC microcontroller from the PIC16F153XX family that integrates 28KB of FLASH program memory, 2KB of RAM, and runs at up to 32MHz. Housed in a 28-pin QFN (6x6mm) package, it combines eXtreme Low-Power (XLP) technology with Core Independent Peripherals (CIPs) and Intelligent Analog blocks for low-power and general-purpose embedded designs. The industrial temperature grade (-40C to +85C) makes it suitable for harsh-environment designs. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, integrating a CPU, non-volatile program memory (FLASH), volatile data memory (RAM), timers, communication peripherals, and interrupt logic on one silicon die. Within the broader taxonomy, an 8-bit MCU belongs to the microcontroller category, which itself is a subfamily of microprocessors and computing ICs, ultimately classified as integrated circuits (semiconductors). The 8-bit architecture remains dominant in cost- and power-sensitive applications where 32-bit performance is unnecessary. Key features of the PIC16F15356-I/ML include four 10-bit PWM outputs, a 10-bit ADC, a 5-bit/8-bit DAC, comparators, four Configurable Logic Cells (CLC), a Complementary Waveform Generator (CWG), and dual EUSART plus SPI/I2C interfaces. The device supports up to 28KB of FLASH (16K x 14 words) and 2KB RAM, offering headroom for applications requiring larger state machines or wireless protocol stacks. Architecturally, the PIC16F15356 uses Microchip's enhanced mid-range core with a 14-bit instruction word and a hardware stack, providing deterministic interrupt latency and a single-cycle instruction execution path. The XLP technology targets nanowatt-level sleep currents, making battery-powered applications feasible. Typical applications include IoT sensor nodes, low-power wireless remote controls, consumer appliances, LED lighting controllers, battery management systems, and small industrial automation controllers. The combination of CWG, CLC, and multiple PWM channels makes it well-suited for motor-control and power-conversion control loops. When designing with this MCU, prioritize the XLP sleep modes for battery applications and reserve at least one CLC for glue logic to reduce external component count. Use the on-board 10-bit ADC with internal FVR reference to minimize external precision components. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes that go beyond the manufacturer datasheet summary.

Angebot Kontakt
PIC16F15356-I/MV - 8-bit XLP MCU 32MHz 28KB Flash | Microchip
PIC16F15356-I/MV

PIC16F15356-I/MV - 8-bit XLP MCU 32MHz 28KB Flash | Microchip

The Microchip Technology PIC16F15356-I/MV is an 8-bit PIC microcontroller from the PIC16F153xx family, offering 32MHz CPU performance, 28KB Flash program memory, 2KB SRAM, and 256B EEPROM, housed in a compact 28-pin UQFN (MV) 4x4mm package. The device features an integrated 5-bit DAC, a 10-bit ADC with up to 17 channels, four PWM modules, two comparators, and four Configurable Logic Cells (CLC) for hardware-based custom peripherals. An 8-bit microcontroller (MCU) is a compact processor that integrates CPU, RAM, non-volatile program memory, and peripherals onto a single silicon die. Within the taxonomy of embedded computing, an 8-bit MCU belongs to the microcontrollers -> integrated circuits -> semiconductors hierarchy. The "PIC" architecture uses a modified Harvard RISC instruction set with separate program and data buses, optimized for deterministic real-time control. The "XLP" (eXtreme Low-Power) family specifically targets battery-powered applications with sub-uA sleep currents and rapid wake-up times. Key features include Core Independent Peripherals (CIPs) that operate without CPU intervention, two EUSART/SPI/I2C communication interfaces, a Complementary Waveform Generator (CWG), and an operating voltage range of 2.3V to 5.5V. The wide voltage range and integrated peripherals reduce external component count, enabling smaller PCB designs. The device also includes a programmable brown-out reset (BOR), watchdog timer, and on-chip debugging via ICD. Architecturally, the PIC16F15356 uses Microchip's mid-range 8-bit core enhanced with hardware multiply, peripheral pin select (PPS) for flexible signal routing, and a 32-level hardware stack. The PPS feature is particularly valuable because it allows most digital peripheral pins to be remapped to multiple I/O pads, simplifying PCB layout and BOM changes late in the design cycle. Typical applications include IoT sensor nodes, home automation controls, low-power wireless sensor hubs, LED lighting controllers, battery-powered consumer devices, and industrial sensor interface modules. Its low-power modes and rich analog peripherals make it ideal for energy-harvesting applications. When designing with this device, prioritize decoupling capacitor placement near VDD pins and follow the trace routing guidelines for the analog section to minimize ADC noise. The PPS flexibility allows late-stage pin reassignment without PCB respins. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical low-power design notes that complement the official datasheet and reference manual.

Angebot Kontakt
PIC16F15356-I/MX - 8-bit MCU, 28KB Flash, 2KB RAM | Microchip
PIC16F15356-I/MX

PIC16F15356-I/MX - 8-bit MCU, 28KB Flash, 2KB RAM | Microchip

The Microchip Technology PIC16F15356-I/MX is an 8-bit PIC microcontroller with 28KB Flash program memory and 2KB SRAM, housed in a 28-pin UQFN (MX) package with eXtreme Low-Power (XLP) technology. Operating from 2.3V to 5.5V, it integrates Intelligent Analog peripherals, Core Independent Peripherals (CIPs), and communication interfaces including 2x EUSART, SPI, and I2C, making it a versatile mid-range MCU for low-power embedded designs. A PIC microcontroller is an 8-bit Harvard-architecture RISC processor from Microchip Technology, widely used in embedded systems for sensing, control, and human-machine interface tasks. PIC MCUs sit in the broader hierarchy: microcontroller -> embedded processor -> semiconductor IC. The PIC16F15356 belongs to the PIC16(L)F153xx mid-range family which adds Core Independent Peripherals (CIPs) that execute complex timing and logic without CPU intervention, freeing the core for application code. Key features of the PIC16F15356-I/MX include 4x 10-bit PWMs, a hardware Comparator, a 5-bit/8-bit DAC, a 10-bit ADC with Computation, a Complementary Waveform Generator (CWG), 4x Configurable Logic Cells (CLC), and 2x EUSART plus SPI/I2C interfaces. The XLP technology delivers nanoWatt sleep currents below 100 nA typical, enabling multi-year battery life in IoT and remote-sensor applications. Architecturally, the PIC16F15356 uses a 32 MHz internal oscillator (8 MIPS at 4x PLL) and supports up to 28 I/O pins with interrupt-on-change capability. The integrated CIPs (CLC, NCO, CWG, PWM, ADC) are interconnected via a fabric that allows hardware-triggered sequencing, effectively turning the chip into a small state machine without CPU code. Typical applications include battery-powered IoT sensor nodes, home automation controllers, low-power remote controls, LED lighting drivers, small motor control loops (fans, pumps), and consumer appliances. The combination of 28KB Flash and 2KB RAM comfortably supports state-machine firmware plus a small RTOS or cooperative scheduler. Design tip: select the LF variant (PIC16LF15356) for sub-3V operation and lower sleep current; reserve the F variant (this part) for 5V-tolerant industrial designs. Always engage the Watchdog Timer (WDT) and Brown-out Reset (BOR) for unattended deployments. This page synthesizes distributor pricing, drop-in package alternatives, and practical XLP design notes that are not consolidated in any single datasheet, complementing the manufacturer documentation with sourcing and cross-reference intelligence.

Angebot Kontakt
PIC16F15356-I/SO - 8-bit MCU 28KB Flash XLP 32MHz SOIC-28
PIC16F15356-I/SO

PIC16F15356-I/SO - 8-bit MCU 28KB Flash XLP 32MHz SOIC-28

The Microchip Technology PIC16F15356-I/SO is an 8-bit PIC16F microcontroller from the PIC16(L)F153XX family, featuring 28KB (16K x 14 words) of Flash program memory, 2KB of RAM, and operating at up to 32MHz from a 3V supply in a 28-pin SOIC package. According to the Microchip product page, the device integrates Intelligent Analog peripherals (ADC, DAC, comparator), Core Independent Peripherals (CIPs) including CLC (Configurable Logic Cell) and CWG (Complement Waveform Generator), and 4x PWM channels, combined with eXtreme Low-Power (XLP) technology for battery-friendly designs. An 8-bit microcontroller (MCU) is a small, self-contained computing IC that integrates a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), peripherals (timers, ADC, communication), and I/O pins on a single die. PIC16F MCUs sit in Microchip's mid-range 8-bit portfolio, positioned between the smaller PIC10/12/16 baseline families and the higher-pin PIC18/dsPIC lines. The PIC16F15356 extends this hierarchy with Core Independent Peripherals that offload tasks from the CPU, freeing it for application logic. Typical roles include appliance controllers, IoT sensor nodes, and human-machine interface (HMI) front-ends. Key features of the PIC16F15356 include 28KB Flash, 2KB RAM, 4x 10-bit PWMs, an on-chip 5-bit/8-bit DAC, a 10-bit ADC with computation, two EUSART peripherals supporting SPI and I2C (asynchronous and synchronous serial), four Configurable Logic Cells (CLC) for hardware state-machine logic, and a Complementary Waveform Generator (CWG). The XLP technology enables nanoWatt sleep currents below 100 nA in deep sleep, making the part suitable for energy-harvesting or battery-powered products with multi-year life requirements. Architecturally, the PIC16F15356 uses Microchip's enhanced mid-range (XLP) core with a 14-bit instruction word, a hardware multiplier, and a single-cycle instruction execution. The combination of CIPs (CLC, CWG, NCO, DSM) plus Intelligent Analog (ADC with computation, DAC, comparator with hysteresis) lets designers replace discrete analog/digital glue with on-chip silicon, shrinking BOM cost and PCB area. The device is supported by MPLAB X IDE, XC8 compilers, and the MPLAB Code Configurator (MCC). Typical applications for this part include low-power IoT sensor nodes, battery-powered home automation devices (thermostats, door sensors), white-goods and small-appliance controls (coffee makers, fans), LED lighting drivers, automotive body and accessory modules (with the -Q automotive variant), industrial sensor conditioning, and consumer Human-Machine Interface (HMI) boards that need PWM-driven indicators and serial communication. The wide 1.8V-5.5V operating range (on the LF version) simplifies designs powered directly from 2x AA cells or USB 5V rails. When designing with this part, plan I/O mapping carefully: SOIC-28 has 28 pins, of which several are dedicated to power, ground, MCLR, and programming/debug (ICSPCLK/ICSPDAT). Reserve PGC/PGD for in-circuit serial programming access. Decouple VDD with a 100 nF ceramic close to the pin and provide a 10 µF bulk cap if the load is dynamic; follow the datasheet "Basic Connection Reference Design" exactly. The XLP sleep modes deliver their lowest current only when unused peripherals are gated off - read the "Sleep Mode" section to avoid peripheral leakage. This page synthesizes distributor pricing from DigiKey/Mouser/LCSC, drop-in 28-SOIC alternatives drawn from the same PIC16F153XX family, and practical design notes that go beyond the bare datasheet bullet list, giving the engineer a single place to validate fit, sourcing, and PCB reuse.

Angebot Kontakt
PIC16F15356-I/SP - 28KB Flash 8-Bit MCU | Microchip | DIP-28
PIC16F15356-I/SP

PIC16F15356-I/SP - 28KB Flash 8-Bit MCU | Microchip | DIP-28

The Microchip PIC16F15356-I/SP is an 8-bit PIC microcontroller in the PIC16F153xx family, featuring 28 KB of Flash program memory (16K x 14 words), 2 KB of SRAM, and a 32 MHz internal oscillator, all integrated in a 28-pin SPDIP (0.300 inch, 7.62 mm) through-hole package. It integrates essential peripherals such as a 10-bit ADC with computation, two 5-bit and 10-bit DACs, four PWM modules, comparators, CWG (Complementary Waveform Generator), four CLC (Configurable Logic Cell) blocks, two EUSART, SPI, and I2C. A microcontroller (MCU) is a single-chip computer that contains a processor core, program and data memory, and programmable I/O peripherals. The PIC16 family is an 8-bit RISC architecture within Microchip's broader portfolio of microcontrollers (MCU -> 8-bit MCU -> PIC16 family -> PIC16F153xx family -> semiconductor). PIC microcontrollers are widely used in embedded control because of their deterministic instruction set, low power consumption, and rich peripheral integration that minimizes external component count. Key features of the PIC16F15356 include Core Independent Peripherals (CIPs) that offload tasks from the CPU, eXtreme Low-Power (XLP) technology for battery-powered applications, and Intelligent Analog peripherals. The device supports a wide operating voltage range, multiple communication interfaces, and provides flexible clock options including a 32 MHz high-speed internal oscillator. The 'I' suffix indicates the industrial temperature grade of -40C to +85C, and the '/SP' suffix designates the 28-pin SPDIP package. Typical applications for the PIC16F15356-I/SP include IoT sensor nodes, home appliances, LED lighting controllers, motor control loops, battery-powered instruments, and consumer electronics that require low-power operation combined with mixed-signal analog and digital I/O. Its 28 KB Flash is sufficient for protocol stacks such as MODBUS, LIN slave, and small Bluetooth Low Energy command libraries when paired with an external transceiver. When designing with this part, ensure decoupling capacitors of 0.1 uF are placed within 5 mm of each power pin. For applications requiring more memory, consider PIC16F15376 in the same family which offers 56 KB Flash in a compatible footprint. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt
PIC16F15356-I/SS - 8-Bit 32MHz 28KB Flash MCU | Microchip
PIC16F15356-I/SS

PIC16F15356-I/SS - 8-Bit 32MHz 28KB Flash MCU | Microchip

The Microchip Technology PIC16F15356-I/SS is an 8-bit PIC microcontroller from the PIC16F153XX family, featuring 28KB of Flash program memory and operating at up to 32 MHz in a 28-pin SSOP package. The device integrates Intelligent Analog peripherals, Core Independent Peripherals (CIPs), and eXtreme Low-Power (XLP) technology for energy-efficient embedded applications. A microcontroller (MCU) is an integrated circuit containing a CPU, memory (Flash, RAM, EEPROM), and configurable peripherals on a single die. The 8-bit PIC family uses a Harvard RISC architecture optimized for deterministic real-time control, distinguishing it from 32-bit Cortex-M parts by lower cost, simpler toolchain, and lower active power in many duty-cycled applications. Within the hierarchy, PIC16F15356 belongs to microcontrollers > 8-bit MCUs > PIC16 family > PIC16F153xx sub-family. Key features include 2KB RAM, 4 PWMs, a hardware Comparator, 5-bit/10-bit DAC, 10-bit ADC, Complementary Waveform Generator (CWG), 4 Configurable Logic Cells (CLC), 2 EUSART, SPI/I2C interfaces, and 16 KB of Flash usable for non-volatile data via Memory Access Partition (MAP). The wide 2.3V to 5.5V operating range, low-power XLP modes (down to nanoWatt), and industrial temperature rating of -40C to +85C make it suitable for battery-powered and harsh-environment deployments. Architecturally, the PIC16F15356 uses the enhanced mid-range 8-bit core with a 14-bit instruction word and hardware multiply/divide, providing single-cycle I/O access and predictable interrupt latency. CIPs like CLC and CWG execute logic and waveform generation autonomously without CPU intervention, freeing the core for higher-level tasks and reducing firmware complexity. Typical applications include IoT sensor nodes, home appliances, motor control signal conditioning, LED lighting controllers, and battery-powered instrumentation. The wide peripheral set makes it especially well suited for low-cost mixed-signal products where the analog front-end and logic glue must live alongside the control loop. When designing with this MCU, allocate at least one CLC for wake-up logic to maximize XLP savings, and ensure the configuration bits match the chosen debug mode (MPLAB ICD) to avoid lock-out. The CWG must be tied to a timer source for proper dead-band control in half-bridge drive. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design considerations not found in the manufacturer datasheet alone, optimized for engineers evaluating PIC16F15356-I/SS for new designs or replacement sourcing.

Angebot Kontakt
PIC16F15356T-E/SSVAO - 28KB Flash 8-bit MCU | Microchip | Auto Grade
PIC16F15356T-E/SSVAO

PIC16F15356T-E/SSVAO - 28KB Flash 8-bit MCU | Microchip | Auto Grade

The Microchip Technology PIC16F15356T-E/SSVAO is an 8-bit PIC microcontroller from the PIC16F153XX family with 28 KB Flash, 2 KB RAM, and 26 I/O pins, housed in a 28-pin SSOP (0.209", 5.30mm) package. It integrates CIPs (Core Independent Peripherals), Intelligent Analog including a 10-bit DAC, comparators, ADC, CWG, and four 10-bit PWMs, plus 2x EUSART and 2x SPI/I2C communication. The 8-bit core runs up to 32 MHz and is qualified to AEC-Q100 for automotive applications. The 'T' suffix denotes tape-and-reel packaging and 'VAO' marks the automotive-grade temperature range. A microcontroller (MCU) is a single-chip computer that combines a CPU core, non-volatile program memory, working RAM, and a rich mix of analog/digital peripherals. Within the broader taxonomy, this part is a microcontroller -> embedded controller -> semiconductor device. 8-bit PIC MCUs remain popular for cost-sensitive, low-power, deterministic control tasks such as sensor reading, motor timing, and user-interface handling where 32-bit processing headroom is unnecessary. Compared with discrete logic or ASIC implementations, an MCU shrinks BOM count, simplifies firmware upgrades, and reduces PCB area. Key features include 28 KB self-programmable Flash, 2 KB SRAM, 256 B EEPROM, 32 MHz internal oscillator, four 10-bit PWMs with Complementary Waveform Generator (CWG), a 5-bit DAC and 10-bit ADC with computation, two comparators, two EUSART, two SPI/I2C, and the eXtreme Low-Power (XLP) Sleep current. CIPs such as the CWG and NCO let designers implement closed-loop control in hardware without CPU load. The device is built on an enhanced mid-range 8-bit core with a 14-bit instruction word and hardware multiplier, supporting up to 16 K x 14 Flash words. The integrated Core Independent Peripherals offload timing-critical tasks, lowering firmware complexity and deterministic latency. Intelligent Analog features include a 10-bit ADC with automated averaging and threshold detection, ideal for sensor signal chains. Typical applications include automotive body controllers, sensor signal conditioning, automotive LED lighting, HVAC fan control, and home appliance user-interface boards. AEC-Q100 qualification makes the part well-suited to dashboard subsystems, BCMs, and lighting drivers. When designing with this MCU, observe the 28-pin SSOP layout constraints: route the analog AVdd/AVss traces carefully, place the decoupling 100 nF capacitor within 5 mm of each supply pin, and use the internal 32 MHz HFINTOSC to minimize external oscillator cost. This page synthesizes distributor pricing for the automotive-grade reel variant, drop-in alternatives from the same Microchip family, and PCB-level design notes not collected in any single manufacturer document.

Angebot Kontakt
PIC16F15356T-I/ML - 8-bit XLP MCU, 28KB Flash, 28-QFN | Microchip
PIC16F15356T-I/ML

PIC16F15356T-I/ML - 8-bit XLP MCU, 28KB Flash, 28-QFN | Microchip

The Microchip Technology PIC16F15356T-I/ML is an 8-bit PIC microcontroller from the PIC16F153xx family, integrating 28KB (16K x 14 words) of Flash program memory, 2KB SRAM and 256 bytes of EEPROM in a 28-pin QFN (6x6 mm) package with exposed pad. The device runs at up to 32 MHz on the enhanced mid-range 16-bit instruction set, operating from 2.3V to 5.5V and providing 25 general-purpose I/O lines. Core Independent Peripherals (CIPs) include four 16-bit PWMs, a 10-bit ADC with Computation (ADCC), a 5-bit/8-bit DAC, two comparators, a Complementary Waveform Generator (CWG), and four Configurable Logic Cells (CLC) that implement state machines, waveform synthesis and custom glue logic without CPU intervention. Communication is served by two EUSART, two SPI/I2C peripherals, and the device is qualified to the industrial -40C to +85C range with eXtreme Low-Power (XLP) sleep currents in the nanoampere range, making it well suited to battery-powered sensor nodes and always-on IoT endpoints. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program and data memory, peripherals and I/O on a single die. The PIC16F15356 belongs to the 8-bit microcontrollers segment of the broader microcontroller hierarchy (8-bit -> 16-bit -> 32-bit MCUs -> microprocessors) and specifically to the PIC16 family, which uses a Harvard architecture with separate program and data buses and a RISC instruction set optimized for deterministic, low-power embedded control. Key differentiating features include 28KB of self-programmable Flash supporting live updates, the ADCC with averaging and oversampling that offloads signal conditioning from the core, and the four CLC blocks that allow hardware-level logic customization for mixed-signal front-ends. The XLP technology combines multiple low-power modes (Doze, Idle, Sleep with retention) with peripheral module disable to reach deep-sleep currents under 100 nA typical. The 28-QFN package is only 6x6 mm with an exposed thermal pad that lowers junction-to-ambient thermal resistance for higher clock operation. Typical applications include consumer appliances, IoT sensor nodes, low-power wireless platforms, LED lighting controllers, small motor and fan controls, and human-machine interface panels. The combination of CWG and PWMs directly drives half-bridges for BLDC or fan control; the ADCC plus CLC allows stand-alone sensor signal chains; the dual EUSART supports RS-485 or LIN node connectivity. When designing with this part, place a 100 nF decoupling capacitor on VDD within 2 mm of the pin and tie the exposed pad to a contiguous ground copper pour for thermal relief. Configure unused I/O as outputs low and enable the MCLR pin's internal weak pull-up only when needed to minimize sleep current. This page consolidates distributor pricing, drop-in 28-QFN alternatives within the PIC16F153xx family, and practical design notes not found in a single section of the manufacturer datasheet.

Angebot Kontakt
PIC16F15356T-I/MV - 8-Bit 32MHz 28KB Flash MCU | Microchip
PIC16F15356T-I/MV

PIC16F15356T-I/MV - 8-Bit 32MHz 28KB Flash MCU | Microchip

The Microchip Technology PIC16F15356T-I/MV is an 8-bit PIC microcontroller built on the enhanced mid-range core, offering 32 MHz operation, 28 KB of Flash program memory, 2 KB of RAM, and 256 bytes of EEPROM in a 28-pin UQFN (4x4 mm) package with exposed pad. It integrates the eXtreme Low-Power (XLP) technology that keeps active current consumption in the microamp range, making it a strong fit for battery-powered and energy-harvesting products. The on-chip peripherals include a 10-bit ADC, two 5-bit and 8-bit DACs, four PWMs, comparators, a Complementary Waveform Generator (CWG), four Configurable Logic Cells (CLC), two EUSART, and SPI/I2C, providing the digital and analog building blocks needed for sensor conditioning and motor or lighting control without external ICs. An 8-bit microcontroller (MCU) is a small single-chip computer built around an 8-bit data path and a Harvard architecture that separates program and data memory for faster, deterministic instruction fetch. The PIC16F1xxx family is part of the broader PIC microcontroller hierarchy: PIC MCU -> 8-bit PIC16 family -> PIC16F1xxx enhanced mid-range -> PIC16F153xx sub-family with XLP and CIPs. This part specifically belongs to the Microchip PIC16(L)F153XX product family, which the manufacturer positions as the lowest-power 8-bit platform with rich Core Independent Peripherals (CIPs). Key features include four Configurable Logic Cells that implement AND/OR/XOR/flip-flop functions in hardware, eliminating software polling for state-driven events, and the CWG which generates complementary PWM with dead-band control for half-bridge drivers. The device supports sleep currents below 1 uA typical with the on-board LFINTOSC and watchdog enabled, allowing years of operation from a single CR2032 cell in duty-cycled sensor nodes. Typical applications include IoT sensor nodes, low-power wireless sensor transmitters, battery-powered home automation devices, LED lighting controllers with analog dimming, and small motor or fan control boards. The wide operating voltage range from 2.3 V to 5.5 V lets it run directly from a single Li-ion cell or a 3.3 V regulated rail. When designing in the PIC16F15356T-I/MV, plan the PCB thermal copper for the exposed pad to keep theta_JA within the 28-UQFN specification, and configure unused pins as outputs to minimize sleep current. Always program the Configuration Words with the brown-out and watchdog settings appropriate to the end application.

Angebot Kontakt
PIC16F15356T-I/SO - 8-Bit XLP MCU, 32MHz, 28KB Flash, 28-SOIC | Microchip
PIC16F15356T-I/SO

PIC16F15356T-I/SO - 8-Bit XLP MCU, 32MHz, 28KB Flash, 28-SOIC | Microchip

The Microchip Technology PIC16F15356T-I/SO is an 8-bit PIC microcontroller from the PIC® XLP™ 16F family, integrating 28KB (16K × 14) of Flash program memory, 2KB of data RAM, and a wide peripheral set into a 28-pin SOIC package. It operates at up to 32MHz from a 2.3V to 5.5V supply, with 25 digital I/O pins, four 10-bit PWMs, two EUSART, SPI, and I2C interfaces, plus analog peripherals that include a 10-bit ADC, a 5-bit DAC, comparators, and four Configurable Logic Cells (CLC). The "XLP" eXtreme Low-Power designation and Core Independent Peripherals (CIPs) make this device a strong fit for battery-powered and always-on applications. An 8-bit PIC microcontroller is a microcontroller built around an 8-bit data path Harvard architecture, where program and data memories use separate buses to speed up fetch and execute cycles. PIC16F1 series parts add peripheral flexibility through CLCs, numerically controlled oscillators, and signal routing that let designers implement logic glue and waveform synthesis without external components. As a category, microcontrollers sit within the broader hierarchy of embedded controllers, microprocessors, and semiconductor ICs used to give products programmable intelligence. Key features of this part include the CIPs block (CLC, CWG, NCO, DSM) for offloading timing-sensitive tasks from the CPU, four 10-bit PWMs for LED, motor, or power control, the 5-bit DAC plus comparator pair for analog signal conditioning, and the device's broad peripheral set that reduces external component count. With XLP sleep currents in the nanoampere range and a wide operating voltage window, the part is engineered for energy-harvesting and battery-backed designs. The PIC16F15356T-I/SO architecture combines a 16-level hardware stack, an interrupt controller with context save, and the enhanced mid-range instruction set, providing re-entrant code compatibility with prior PIC16F1 generation tools while exposing new peripherals. The 28-SOIC package supports standard surface-mount assembly and gives 25 I/O for keypad, display, or sensor interface tasks. Typical applications include IoT sensor nodes, home appliances with HMI displays, low-power wireless remote controls, battery management subsystems, LED lighting controllers, and industrial sensor interface boards. The combination of CLCs, CWG, and PWMs makes this MCU especially well suited to driving MOSFETs in low-end motor and lighting circuits. When designing with this device, budget decoupling with a 100nF ceramic cap adjacent to each VDD pin, place a 10µF bulk capacitor at the regulator output, and reserve an ICSPCLK/ICSPDAT header for in-circuit programming. The internal 32MHz oscillator typically eliminates the need for an external crystal in cost-sensitive designs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer datasheet, helping engineers evaluate the PIC16F15356T-I/SO against PIC16F15355 and PIC16F15354 same-family variants in seconds.

Angebot Kontakt
PIC16F15356T-I/SS - 28KB Flash 8-bit MCU 32MHz SSOP-28 | Microchip
PIC16F15356T-I/SS

PIC16F15356T-I/SS - 28KB Flash 8-bit MCU 32MHz SSOP-28 | Microchip

The Microchip Technology PIC16F15356T-I/SS is an 8-bit PIC microcontroller from the PIC16F153XX family, integrating 28 KB of Flash program memory, 2 KB of RAM, and a 32 MHz internal CPU in a 28-pin SSOP package. The 'T' suffix denotes Tape and Reel packaging, while 'I/SS' specifies the -40C to +85C industrial temperature grade and SSOP-28 surface-mount form factor. What is a PIC16 8-bit microcontroller? An 8-bit PIC microcontroller is a low-power, RISC-based single-chip computer built around an 8-bit data path, a Harvard architecture, and on-chip Flash program memory. PIC16 microcontrollers sit within Microchip's broader taxonomy of MCU -> 8-bit MCU -> PIC16 family -> XLP (eXtreme Low Power) subfamily -> Intelligent Analog + Core Independent Peripherals (CIPs) tier, balancing low cost, rich peripherals, and sub-uA sleep currents for battery-powered and embedded applications. Key features of the PIC16F15356 include four 10-bit PWM outputs, a 5-bit DAC, a 10-bit ADC with computation (ADC2), two comparators, a Complementary Waveform Generator (CWG), four Configurable Logic Cells (CLC), two EUSART, one SPI, and one I2C interface. The eXtreme Low Power (XLP) technology enables sleep currents below 50 nA typical in the idle DOZE mode, with multiple power-managed modes for battery-friendly designs. The 28-pin SSOP package offers 24 GPIO pins, 25 mA source/sink capability per I/O, and a peripheral pin select (PPS) system that maps digital functions to any user-chosen I/O pin. The PIC16F15356T-I/SS operates from 2.3V to 5.5V VDD and includes an internal 32 MHz HFINTOSC with 1% calibration accuracy, eliminating external crystals in cost-sensitive applications. The device integrates an instruction cache, hardware multiplier, and a 16-level hardware stack for deterministic real-time behavior. Intelligent Analog features (zero-cross detect, slope compensation, and ADC2 with averaging) and CIPs (CLC, NCO, CWG) allow many closed-loop functions to run without CPU intervention. Typical applications include consumer white goods and home appliances, IoT sensor nodes, LED lighting controllers, small motor control (fans and pumps), battery chargers, low-cost LoRa/BLE sensor hubs, USB-to-UART bridges when paired with a serial IC, and any general-purpose 8-bit control or HMI replacement that benefits from on-chip intelligence. The wide operating voltage and rich peripherals support both 3.3V and 5V system designs. When designing with this MCU, place a 0.1 uF decoupling capacitor as close as possible to each VDD/VDDCORE/VSS pin pair, and reserve room for a 10 uF bulk capacitor if high inrush loads are present. Configure unused I/O pins as outputs with low state to minimize sleep current and avoid floating-input leakage. The peripheral pin select (PPS) remapping must be locked before changing the pin map or oscillator settings to prevent glitches. This page synthesizes verified distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet, including explicit lifecycle status, parametric proximity analysis, and pinout-by-pin function descriptions for the SSOP-28 footprint.

Angebot Kontakt
PIC16F15375-E/ML - 14KB Flash 8-bit MCU, 44-pin QFN | Microchip
PIC16F15375-E/ML

PIC16F15375-E/ML - 14KB Flash 8-bit MCU, 44-pin QFN | Microchip

The Microchip PIC16F15375-E/ML is an 8-bit PIC RISC microcontroller featuring 14KB of Flash program memory, 1KB of RAM, and a rich set of Core Independent Peripherals (CIPs), housed in a 44-pin QFN EP (Exposed Pad) package rated for the -40C to +125C extended temperature range. It belongs to the PIC16(L)F153xx family and combines Intelligent Analog, eXtreme Low-Power (XLP) technology, and communication peripherals for low-power embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable I/O peripherals on one die. The 8-bit PIC architecture uses a modified Harvard RISC core that executes most instructions in one cycle, and PIC microcontrollers belong to the broader category of microcontrollers -> embedded processors -> semiconductors. The '153xx generation adds CIPs such as CLC, CWG, NCO, and DSM that can operate without CPU intervention, reducing active-mode current and enabling deterministic timing. Key specifications include 14KB Flash, 1KB SRAM, 256B EEPROM, four 10-bit PWMs with complementary outputs, a 5-bit DAC, a 10-bit ADC with computation, two comparators, four Configurable Logic Cells (CLC), a Complementary Waveform Generator (CWG), two EUSART (with LIN), one SPI/I2C, and eXtreme Low-Power features such as IDLE/DOZE modes and nanoWatt XLP sleep currents in the order of nanoamps. Supply voltage runs from 2.3V to 5.5V (F suffix = 3V-5.5V Vdd range typical for this family). The 44-pin QFN EP package provides excellent thermal dissipation through the exposed pad, which must be soldered to a ground pad to meet electrical and thermal specifications. The QFN-44 footprint is compact (8x8 mm typical) and supports high-pin-count I/O on a small board area, ideal for hand-held and space-constrained designs. Typical applications include low-power IoT sensor nodes, LED lighting and signage controllers, USB-CDC/HID human-interface devices, battery-powered measurement instruments, and motor/solenoid control with the CWG. The combination of XLP, CIPs, and EUSART makes the part well suited to mains-powered or battery-powered nodes that need deterministic peripheral behaviour without waking the CPU. When designing with this part, always solder the exposed pad to a ground plane of at least 8 thermal vias for thermal and electrical performance. Use Microchip's MPLAB X IDE with the XC8 compiler; the device is supported by the MPLAB Code Configurator (MCC) for graphical peripheral setup, which dramatically reduces firmware development time. This page synthesizes distributor stock, drop-in same-package alternatives, application notes and practical design considerations not found in the bare datasheet, optimized for engineers who already know the PIC16 architecture and need a quick decision matrix.

Angebot Kontakt
PIC16F15375-E/MVVAO - 14KB Flash 32MHz XLP 8-bit MCU | Microchip
PIC16F15375-E/MVVAO

PIC16F15375-E/MVVAO - 14KB Flash 32MHz XLP 8-bit MCU | Microchip

The Microchip Technology PIC16F15375-E/MVVAO is an 8-bit PIC16 microcontroller built on the XLP™ (eXtreme Low-Power) family platform, featuring 14KB (8K x 14 words) of Flash program memory, 1KB of SRAM, and an internal 32MHz oscillator, all integrated into a 40-pin UQFN (MV) 5x5mm package. The VAO suffix indicates the automotive AEC-Q100 qualification, and the /MV denotes the UQFN-40 surface-mount package, while the E denotes the -40C to +125C extended operating temperature range. The PIC16F15375 belongs to the broader PIC16(L)F153xx family of 8-bit microcontrollers, which sit within Microchip's mid-range PIC16 architecture hierarchy. An 8-bit MCU executes instructions on 8-bit data widths, using a Harvard memory architecture and a RISC-based instruction set; PIC16 devices in particular are recognized in the embedded industry for their deterministic timing, ease of programming in C or assembly through MPLAB X IDE, and a rich ecosystem of Core Independent Peripherals (CIPs). The XLP designation specifically targets battery-powered and energy-harvesting designs by integrating nanoWatt technology, deep-sleep modes drawing single-digit microamps, and peripheral operation while the CPU is halted. Key features include 38 digital I/O pins, four 10-bit PWMs with complementary outputs, two comparators, a 5-bit DAC, a 10-bit ADC with automatic averaging, a Complementary Waveform Generator (CWG), two EUSART peripherals, two SPI/I2C interfaces, and 32MHz internal oscillator operation. The CIP mix (CLC, NCO, CWG, PWM, ADC with computation) allows complex signal generation and feedback loops without CPU intervention, reducing power and code complexity. Typical applications include automotive body electronics, sensor nodes, LED lighting controllers, low-power IoT endpoints, battery management peripherals, and industrial control loops. The combination of 32MHz performance, 14KB Flash, and XLP sleep currents below 1 uA makes the device suitable for AEC-Q100 automotive subsystems such as HVAC controls, mirror modules, ambient lighting, and seat controllers.

Angebot Kontakt
PIC16F15375-E/PT - 32MHz 8-bit MCU, 14KB Flash, 44-TQFP | Microchip
PIC16F15375-E/PT

PIC16F15375-E/PT - 32MHz 8-bit MCU, 14KB Flash, 44-TQFP | Microchip

The Microchip Technology PIC16F15375-E/PT is an 8-bit PIC16 RISC microcontroller running at up to 32MHz, integrating 14KB (8K x 14 words) of Flash program memory and 1KB of SRAM, housed in a 44-pin TQFP (10x10 mm) package. It is part of the PIC16F153XX family and combines eXtreme Low-Power (XLP) technology with Intelligent Analog and Core Independent Peripherals (CIPs) for low-power mixed-signal designs. An 8-bit microcontroller (MCU) is a compact, low-cost processor built around an 8-bit data path, widely used in embedded systems where deterministic real-time response, simple peripheral integration, and low power are more important than raw computational throughput. Within the broader semiconductor hierarchy, an MCU sits under microcontrollers -> embedded processors -> logic ICs -> integrated circuits. The PIC16F15375 belongs to the PIC16 mid-range family and combines a RISC-like Harvard architecture with extensive on-chip analog and digital peripherals, enabling many designs to be realized without external ADC, DAC, comparator, or PWM ICs. Key features include 35 channels of 10-bit ADC, 2 DAC channels, 2 comparators, 4 PWM outputs, a Complementary Waveform Generator (CWG), 2 EUSART modules, 2 SPI and 2 I2C interfaces, plus eXtreme Low-Power modes with nanoWatt XLP technology. The 44-TQFP (PT) package gives 36+ general-purpose I/O pins, making it suitable for I/O-rich human-interface and sensor-hub designs. The integrated peripherals support signal conditioning, motor control loops, and communication bridging without external glue logic. The architecture uses a 14-bit instruction word with a 32MHz internal oscillator, providing single-cycle instruction execution and predictable interrupt latency. Intelligent Analog peripherals such as the 10-bit ADC with hardware Capacitive Voltage Divider (CVD), zero-cross detect, and slope compensation are tightly coupled with CIPs like CWG and Numerically Controlled Oscillator (NCO), enabling sophisticated control loops in firmware-light environments. Typical applications include IoT sensor nodes, low-power wireless HMI panels, BLDC fan and pump controllers, LED lighting controllers, battery chargers, and consumer appliance front-panel controllers. The combination of 14KB Flash and 1KB RAM supports a real-time OS or state-machine architecture with room for bootloaders. When designing with this part, ensure the VDDCORE pin has a 1µF decoupling capacitor within 2mm and that MCLR is pulled high through a 10kΩ resistor; failure to do this can cause programming or brown-out-reset issues. For low-power designs, leverage the DOZE and SLEEP modes to reduce quiescent current below 1µA. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, including same-brand and cross-brand pin-compatible replacement guidance.

Angebot Kontakt