Integrierte Schaltungen

PIC24HJ64GP504-I/ML

PIC24HJ64GP504-I/ML - 40 MIPS 16-bit MCU, 64KB Flash, 44-QFN | Microchip

The Microchip PIC24HJ64GP504-I/ML is a 16-bit microcontroller from the PIC24H family, delivering 40 MIPS CPU performance with 64KB of Flash program memory and 8KB of SRAM in a 44-pin QFN (8x8) package. It operates from 3.0V to 3.6V and is rated for the industrial temperature range of -40C to +85C. The -I/ML suffix denotes the industrial-grade variant in a lead-free QFN surface-mount package. A 16-bit microcontroller (MCU) is an embedded processor that executes instructions on a 16-bit data path, providing higher throughput and richer peripheral integration than 8-bit MCUs while remaining lower-cost and lower-power than 32-bit Cortex-M parts. PIC24H devices specifically target high-speed, deterministic control loops - motor control, digital power, audio processing, and graphics - where 40 MIPS performance and DSP-friendly instruction set (via the related dsPIC33F) matter. Positioned in the broader hierarchy, the PIC24H sits within Microcontrollers > 16-bit MCUs > PIC24H family > PIC24HJ64GP504 sub-family. Key features include 64KB (22K x 24-bit words) of Flash, 8KB of SRAM, 35 I/O pins, two SPI modules, two I2C modules, two UART modules, a 12-bit ADC with up to 13 channels and 500 ksps conversion rate, plus DMA with 8 channels. The 44-QFN (8x8 mm) package provides a compact footprint suitable for space-constrained designs. An integrated RTCC, multiple timers, and a 16-bit motor-control PWM module make the part well-suited to closed-loop control applications. The PIC24HJ64GP504 uses the 16-bit modified Harvard architecture with a 16-bit data path and 24-bit instruction word, supporting both C and assembly development under MPLAB X IDE and the MPLAB XC16 compiler. Hardware multiply/divide, zero-overhead looping, and bit-field manipulation accelerate real-time DSP-style code, while DMA offloads data movement from the CPU to improve interrupt determinism. Typical applications include BLDC and PMSM motor control, digital power conversion (LLC, PFC, phase-shifted full-bridge), industrial automation PLCs, sensor signal conditioning, and medical instrumentation. The 12-bit ADC and dual SPI peripherals simplify multi-axis motion control designs, while the high-speed PWM module supports field-oriented control (FOC) and space-vector modulation. When designing with this part, pay close attention to decoupling - place 100nF ceramics close to each VDD/VSS pin pair, plus a bulk 10uF tantalum near the supply pin. For motor-control applications, the exposed pad of the QFN package must be soldered to a sufficiently large ground copper pour to meet thermal dissipation requirements. This page synthesizes distributor pricing, drop-in alternative listings, and practical engineering notes that go beyond the manufacturer datasheet to accelerate BOM selection, sourcing decisions, and PCB implementation.

Angebot Kontakt

PIC24HJ64GP504-I/PT

PIC24HJ64GP504-I/PT - 40 MIPS 16-bit MCU, 64KB Flash, 44-TQFP | Microchip

The Microchip PIC24HJ64GP504-I/PT is a 16-bit PIC24H microcontroller featuring a 40 MIPS CPU core, 64 KB of Flash program memory, 8 KB of SRAM, and a 44-pin TQFP (PT) package rated -40C to +85C for industrial environments. It executes instructions from a modified Harvard architecture with a single-cycle 16-bit ALU and DSP extensions, supporting zero-overhead hardware looping and nested interrupts for deterministic real-time control. What is a 16-bit microcontroller? A microcontroller (MCU) is a single-chip computer containing a CPU core, volatile and non-volatile memory, peripherals, and I/O. A 16-bit MCU like the PIC24H sits between 8-bit parts (PIC16, AVR) and 32-bit Cortex-M parts in performance and code density, offering native 16-bit data paths, deterministic interrupt latency, and DSP-grade MAC operations without the cost or power of ARM Cortex parts. It belongs to the power-management-and-control hierarchy: microcontroller -> embedded processor -> semiconductor. Key features include 64 KB (22K x 24) Flash with self-programmability, 8 KB SRAM, 8-channel DMA for CPU-offloading data moves, two UARTs, two SPI, one I2C, one ECAN module, three 16-bit timers, four 32-bit capture inputs, two 16-bit compare/PWM outputs, a 12-bit 500 ksps ADC with up to 13 channels, and two op-amps/ comparators. The PIC24H architecture enables 70 MIPS at 3.3V in later datasheet revisions; the I/PT industrial variant operates from 3.0V to 3.6V across -40C to +85C. Typical applications include industrial motor control (BLDC/PMSM FOC), digital power conversion, sensor data acquisition with DMA streaming, CAN-connected automotive body controllers, and embedded real-time control loops. The wide peripheral set and DMA allow the CPU to remain idle during data transfer, freeing cycles for control algorithms. When designing with this MCU, place 0.1 uF and 10 uF decoupling capacitors adjacent to each VDD/VDDcore pin pair and keep trace lengths to the 40 MHz crystal short to avoid EMI. The 16-bit architecture is C-friendly - MPLAB XC16 compilers, MPLAB X IDE, and Microchip's DSP library and motor-control application frameworks are recommended toolchain companions. This page synthesizes distributor stock, drop-in Microchip PIC24HJ alternatives, and practical design notes not always aggregated in the manufacturer datasheet.

Angebot Kontakt

PIC24HJ64GP504T-I/ML

PIC24HJ64GP504T-I/ML - 16-bit 40MIPS MCU 64KB Flash 44-QFN | Microchip

The Microchip Technology PIC24HJ64GP504T-I/ML is a 16-bit PIC24H microcontroller IC operating at up to 40 MIPS with 64KB (22K x 24) of Flash program memory, housed in a 44-pin QFN (8x8 mm) package. It features 8KB RAM, an enhanced 16-bit modified Harvard architecture, and integrated peripherals including DMA, multiple timers, ADC, and communication interfaces. A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, and integrated peripherals. The PIC24H family sits in the hierarchy as a 16-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. These 16-bit devices target high-speed control applications that exceed the capability of 8-bit MCUs while offering deterministic interrupt latency and rich peripheral integration. Key features of the PIC24HJ64GP504T-I/ML include 40 MIPS CPU performance from a 3.0V to 3.6V supply, 16-channel 12-bit ADC with 500 ksps conversion rate, multiple UART/SPI/I2C peripherals, and 35 programmable I/O pins. The device also supports 8 DMA channels for efficient data movement without CPU intervention, plus three 16-bit timers that can be paired to form a 32-bit timer. The device uses a modified Harvard architecture with a 16-bit data path and 24-bit instruction word, providing efficient C code density and DSP-style arithmetic. The integrated DSP engine (in the dsPIC33F-compatible family) makes this MCU suitable for digital signal control loops. The 44-QFN package with exposed pad enables compact layouts while maintaining thermal performance. Typical applications include industrial motor control (BLDC, PMSM, AC induction), digital power conversion (SMPS, PFC, LLC), sensor signal conditioning, automotive body electronics, and consumer audio processing. The wide peripheral set supports multi-protocol industrial networking including CAN, SPI-based sensor hubs, and UART-based device management. When designing, ensure the supply is regulated within 3.0V-3.6V and that decoupling capacitors are placed within 5mm of the VDD pins. The 'T' suffix indicates Tape & Reel packaging, while 'I/ML' denotes the -40C to +85C industrial temperature grade and 44-QFN (ML) package. This page synthesizes distributor pricing, drop-in alternatives within the PIC24H family, and practical design notes not found in the manufacturer datasheet alone.

Angebot Kontakt

PIC24HJ64GP504T-I/PT

PIC24HJ64GP504T-I/PT - 16-bit 40MIPS 64KB Flash MCU 44-TQFP | Microchip

The Microchip Technology PIC24HJ64GP504T-I/PT is a 16-bit microcontroller from the PIC24H family, featuring a 40 MIPS CPU core, 64KB of Flash program memory (22K x 24 words), and a 44-pin TQFP (10x10 mm) package. The "T" suffix designates tape and reel packaging, and the "I" temperature grade indicates an industrial operating range of -40C to +85C. A 16-bit microcontroller (MCU) is an embedded processor that executes instructions on 16-bit data paths, offering a balance of computational throughput and code efficiency between 8-bit microcontrollers and 32-bit ARM Cortex-M parts. The PIC24H architecture extends this by adding DSP-friendly instructions and DMA, positioning it within the broader taxonomy of: microcontroller -> embedded processor -> semiconductor IC. It is commonly used in real-time control loops where deterministic execution and DSP math acceleration are required. Key features of the PIC24HJ64GP504T-I/PT include up to 21 general-purpose I/O pins, 8KB of RAM, an 8-channel DMA controller, three 16-bit timers/counters that can pair into one 32-bit timer, two input capture modules, two output compare modules, and a 16-channel 10-bit/12-bit ADC. Communication peripherals include two UART, two SPI, and one I2C interface, plus a CAN 2.0B module. The device operates from 3.0V to 3.6V, supports 40 MHz operation (40 MIPS at 3.3V), and is pin-compatible with the dsPIC33F family. Architecturally, the PIC24HJ64GP504T-I/PT is built on a Harvard-based modified-RISC core with separate program and data buses, a hardware multiply/divide unit, and DSP-oriented instructions. The integrated DMA engine moves data between peripherals and memory without CPU involvement, freeing cycles for control algorithms. The wide ADC front-end and rich timer/capture/compare peripherals enable high-resolution sampling for motor control and power-conversion loops. Typical applications include industrial motor control (BLDC, PMSM, and stepper drives), digital power conversion (SMPS, PFC stages, UPS), industrial sensing and data acquisition, automotive body and chassis subsystems, and consumer audio/DSP processing. Designers also deploy it in CAN-based networked embedded systems, robotics, and solar inverter controllers. When designing with this MCU, ensure that your compiler toolchain targets the pic24-dsp variant (e.g., MPLAB XC16) so that DSP intrinsics and the hardware multiply/divide are enabled. Reserve dedicated analog and digital ground planes and place the 10 uF + 0.1 uF decoupling network close to each VDD/AVDD pin. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, enabling faster part selection and BOM consolidation.

Angebot Kontakt

PIC24HJ64GP506-E/PT

PIC24HJ64GP506-E/PT - 16-bit 40MIPS MCU, 64KB Flash, 64-TQFP

The Microchip PIC24HJ64GP506-E/PT is a 16-bit PIC24H microcontroller delivering up to 40 MIPS performance, integrating 64 KB of Flash program memory and 8 KB of SRAM, and packaged in a 64-pin TQFP (10x10 mm). It operates from a 3.0 V to 3.6 V supply and provides 53 general-purpose I/O pins suitable for mixed-signal embedded designs. The -E suffix denotes the extended (-40C to +125C) industrial temperature grade, while /PT indicates the TQFP-64 package. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program and data memory, peripherals, and interrupt logic on a single silicon die. The PIC24H architecture is a modified Harvard 16-bit RISC core in the broader PIC family hierarchy (PIC24 -> 16-bit DSC/MCU -> microcontroller -> embedded processor). It is the 16-bit general-purpose tier that bridges Microchip's PIC24F and dsPIC33F families, with seamless migration paths between them. Key features of the PIC24HJ64GP506-E/PT include a 40 MIPS CPU, dual 16-bit timers, an enhanced 16-channel 10-bit/12-bit ADC, multiple UART, SPI, and I2C peripherals, an ECAN module, and a Parallel Master Port. The device also integrates a 16-bit comparator and a charge time measurement unit (CTMU), enabling touch and capacitive-sensing applications without external circuitry. Architecturally, the PIC24HJ64GP506 uses a 16-bit modified Harvard bus with a 24-bit instruction word. Its 40 MHz internal oscillator and PLL provide a 40 MIPS throughput, while 17-bit x 17-bit hardware multiplication and a 32-bit by 16-bit divider deliver DSP-class math performance in C-friendly code. The PIC24HJ64GP506A revision adds peripheral errata fixes and is recommended for new designs where sourcing allows. Typical applications include industrial motor control, switched-mode power supplies (SMPS), uninterruptible power systems, advanced sensor fusion, automotive body and chassis controllers, and human-machine interface (HMI) panels. The wide temperature range and AEC-Q100 qualification of certain variants make it equally suited to harsh industrial environments. When designing with this MCU, ensure your toolchain uses MPLAB XC16 or compatible and verify the silicon revision in the device ID register - the PIC24HJ64GP506A revision supersedes the original and contains corrected ADC behaviour. Add a 0.1 uF decoupling cap adjacent to every VDD/VSS pair to maintain ADC accuracy at high sample rates. This page consolidates distributor pricing, datasheet links, drop-in same-family alternates and practical design notes not aggregated by individual distributor listings, helping engineers make an informed second-source decision.

Angebot Kontakt

PIC24HJ64GP506-I/PT

PIC24HJ64GP506-I/PT - 16-bit 40 MIPS MCU 64KB Flash | Microchip

The Microchip Technology PIC24HJ64GP506-I/PT is a high-performance 16-bit microcontroller from the PIC24H family delivering up to 40 MIPS at 3.3V with 64 KB (22K x 24) of self-programmable Flash program memory, housed in a 64-pin TQFP package (10x10 mm, 1.0 mm height, plastic, MS-026). It integrates 53 digital I/O lines, two UART, two SPI, two I2C peripherals, multiple 16-bit timers, a 10-bit analog-to-digital converter (ADC) with up to 18 input channels, and a 17-bit x 17-bit hardware multiplier supporting 32-bit ALU operations for C-compiled firmware via MPLAB XC16. A 16-bit microcontroller is an integrated circuit that combines a CPU core, on-chip memory and a configurable set of peripherals into a single device for embedded control. Within the broader product taxonomy, the PIC24HJ64GP506 sits at: microcontroller -> 16-bit MCU -> PIC24H family -> high-performance general-purpose MCU -> 40 MIPS class. It uses Microchip's enhanced modified Harvard architecture with a 16-bit data path and 24-bit instructions, providing strong code density and a deterministic instruction set familiar to PIC developers while enabling C-based firmware development. Key features include 64 KB of Flash, 8 KB of SRAM, two UART modules, two SPI and two I2C peripherals, a 10-bit ADC, multiple 16-bit timer/capture modules, parallel I/O expansion via Peripheral Pin Select (PPS) and a 4-channel DMA controller for memory-to-peripheral transfers. Industrial-grade (-I) operating temperature range is -40C to +85C, suitable for factory-floor and outdoor equipment enclosures. The 64-pin TQFP package exposes enough GPIO and peripheral pins to interface with parallel displays, external memories or several sensor buses. Architecturally, the PIC24H core uses a modified Harvard topology with separate program and data buses, dedicated hardware multiply (17x17-bit) and divide, a 32-bit ALU and a deterministic interrupt controller with zero-overhead loop hardware. Up to 40 MIPS throughput supports real-time sensor-fusion loops, modest DSP pre-processing and motor-control state machines where bounded jitter matters. Typical applications include industrial sensor hubs, building-automation controllers, low-cost motor-drive signal conditioning, USB-to-UART bridge replacements, and consumer white-goods user-interface boards. The wide temperature range adds margin for thermally-cycling enclosures. A critical design consideration is supply decoupling: at 40 MIPS, transient current demands can reach tens of milliamps during peripheral activity, so a 10 uF bulk plus a 0.1 uF high-frequency ceramic capacitor should be placed close to each VDD/VDDcore pair. The industrial-grade (-I) temperature range adds margin for thermal cycling in industrial enclosures. This page synthesizes distributor pricing, drop-in alternatives, and design notes that complement the manufacturer datasheet PIC24HJXXXGPX06/X08/X10.

Angebot Kontakt

PIC24HJ64GP506A-E/MR

PIC24HJ64GP506A-E/MR - 16-bit 40MIPS 64KB Flash MCU | Microchip

The Microchip Technology PIC24HJ64GP506A-E/MR is a 16-bit microcontroller from the PIC24H family, featuring a modified Harvard architecture CPU capable of 40 MIPS at 40 MHz, and housed in a 64-pin VQFN (9x9 mm) package. It integrates 64 KB of Flash program memory (22K x 24 words), 8 KB of SRAM data memory, and a rich peripheral set including multiple 16-bit timers, UART/SPI/I2C interfaces, a 10/12-bit ADC, PWM outputs, DMA, and a Parallel Master Port for external bus interfacing. What is a PIC24H microcontroller? The PIC24H is Microchip's 16-bit MCU family designed for high-performance control applications that demand deterministic, high-speed computation. Within Microchip's broader hierarchy, the PIC24H sits between 8-bit PIC10/12/16/18 MCUs and 32-bit PIC32 devices, sharing a compatible peripheral set and instruction set with the dsPIC30F and dsPIC33F families to enable easy migration. The 'H' suffix specifically denotes the high-performance tier, distinguished by the 40 MIPS execution speed. Key features include 16-channel 12-bit ADC, up to 8 PWM outputs, two I2C and two SPI peripherals, two UART modules with FIFO, and 5 16-bit timers. The 16-bit modified Harvard bus architecture delivers single-cycle MAC operations and hardware multiply, making it well-suited for digital signal processing tasks at modest computational requirements. Industrial-grade CMOS process technology supports an extended temperature range. Typical applications include industrial motor control, digital power conversion, advanced sensor processing, and embedded control in factory automation. The PIC24H's deterministic interrupt latency and rich PWM/ADC peripherals make it a strong choice for closed-loop control systems where 32-bit PIC32 processing overhead is unnecessary. When designing with the PIC24HJ64GP506A-E/MR, ensure adequate decoupling and consider using the Parallel Master Port for external memory expansion. Migration between -I, -E, and -H temperature grades is pin-compatible across the family.

Angebot Kontakt

PIC24HJ64GP506AT-I/MR

PIC24HJ64GP506AT-I/MR - 16-bit 64KB Flash MCU, 40 MIPS, 64-VQFN

The Microchip Technology PIC24HJ64GP506AT-I/MR is a 16-bit PIC24H general-purpose microcontroller featuring a 64 KB Flash program memory, 40 MIPS execution speed at 40 MHz CPU clock, and a 64-pin VQFN package (MR). It is part of the PIC24HJ64GP506A family, designed for high-performance 16-bit control with DSP-style computational throughput. A 16-bit microcontroller is an embedded computing device that executes instructions on 16-bit data paths, offering significantly higher throughput than 8-bit MCUs while retaining deterministic real-time behavior. The PIC24H family is built around a modified Harvard architecture with single-cycle MAC operations, positioning it in the signal conditioning and control hierarchy between PIC24F (lower power) and dsPIC33F (full DSP) devices. It provides natural migration to the dsPIC33F family through shared peripherals and pinout compatibility. Key features include 64 KB of self-programmable Flash, 8 KB of SRAM, a 16-channel 10-bit ADC with 500 ksps conversion rate, multiple PWM and timer modules, UART/SPI/I2C peripherals, and a real-time clock. The 3.0 V to 3.6 V single-supply operation simplifies power-tree design, and the device supports industrial temperature range from -40 °C to +85 °C. Hardware DMA engines and a high-performance interrupt controller reduce CPU overhead for real-time control loops. The architecture integrates a 16-bit data path with single-cycle multiply and divide, dual-port SRAM for simultaneous DMA access, and a 17-bit x 17-bit hardware multiplier that supports fractional math for digital signal conditioning. The 40 MIPS performance enables closed-loop motor control, sensor fusion, and digital filter implementation without offloading to a dedicated DSP. The device is pin-compatible with the dsPIC33F family, enabling software/hardware migration when DSP extensions become necessary. Typical applications include motor control drives, industrial sensor interfaces, HVAC controllers, and consumer audio products that benefit from the 16-bit throughput. It is also used in power-conversion digital control loops, automotive body and chassis subsystems, and as a bridge device in designs migrating from 8-bit to 16-bit architectures. When designing with this MCU, allocate sufficient decoupling on AVDD and provide a low-impedance ground return under the 64-pin QFN thermal/exposed pad. Programming uses ICSP via PGECx/PGEDx; the trace length on these lines should be kept short and isolated from switching nodes. The 'A' revision includes silicon errata fixes that affect PWM timing; consult the device errata document before committing to a design. This page consolidates distributor pricing, verified drop-in alternatives, and practical design notes that complement the manufacturer datasheet, helping engineers evaluate fit and source the part efficiently.

Angebot Kontakt

PIC24HJ64GP506T-I/PT

PIC24HJ64GP506T-I/PT - 16-bit 40MIPS MCU 64KB Flash 64-TQFP | Microchip

The Microchip Technology PIC24HJ64GP506T-I/PT is a 16-bit general-purpose microcontroller from the PIC24H family, delivering 40 MIPS performance at 3.3V with 64KB of Flash program memory and 8KB of RAM in a 64-pin TQFP (10x10 mm) industrial-temperature package. The device combines Microchip's enhanced PIC® RISC architecture with DSP-friendly instructions, providing up to 70 MIPS of computational throughput while supporting low-power operation modes for energy-constrained designs. A microcontroller (MCU) is a single-chip computer containing a processor core, program and data memory, peripherals, and I/O. The PIC24H family sits in Microchip's 16-bit dsPIC-compatible tier, offering seamless migration paths to/from PIC24F, dsPIC30F, and dsPIC33F devices. In the broader taxonomy, PIC24HJ64GP506 belongs to the PIC24H 16-bit MCU family, which itself is a subclass of microcontroller -> embedded processor -> semiconductor. This hierarchy ensures that the device integrates cleanly with existing PIC ecosystem toolchains (MPLAB X IDE, XC16 compiler) and evaluation platforms. Key features of the PIC24HJ64GP506T-I/PT include 64KB (22K x 24) Flash, 8KB SRAM, two UART/SPI/I2C peripherals, a 16-channel 10-bit ADC with 500 ksps conversion rate, five 16-bit timers, and 53 general-purpose I/O pins. The industrial-temperature grade (-40C to +85C) and the 64-pin TQFP package make it suited for harsh-environment embedded designs requiring visible status LEDs or system expandability. An integrated 8 MHz internal oscillator and flexible clock-switching circuitry further simplify BOM cost. The PIC24H CPU core uses a modified Harvard architecture with a 16-bit datapath and 24-bit instruction word, supporting C-compiled firmware with deterministic interrupt latency. The device's peripheral set maps cleanly to motor control, industrial sensing, and human-machine interface (HMI) boards, while its 3.3V core voltage aligns with modern low-power logic. Per the datasheet 70175H, all PIC24HJ64GPX06/64/128/256 variants are pin-compatible within the 64-pin TQFP footprint, supporting drop-in migration to higher-memory or lower-cost SKUs as production needs evolve. Typical uses cover industrial motor control (BLDC/PMSM), sensor data acquisition nodes, HMI displays with LCD or keypad, USB-aware embedded peripherals, and automotive accessory controllers. The device's 53 I/O pins and 16 ADC channels support front-panel button arrays, rotary encoders, and multi-loop analog sensing. The "T" suffix indicates tape-and-reel packaging for high-volume SMT assembly, while the "I/PT" suffix indicates industrial temperature grade and 64-pin TQFP package. When designing with this MCU, ensure that the 3.3V regulator can source the worst-case active current (approximately 60 mA at full MIPS) and that decoupling capacitors are placed within 5 mm of each VDD/VSS pair. For new designs, consider the PIC24HJ128GP506 as a memory-scalable drop-in upgrade, or the PIC24FJ64GA006 if lower power is required. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, including cross-brand comparisons and pin-compatibility guidance.

Angebot Kontakt

PIC24HJ64GP510-I/PF

PIC24HJ64GP510-I/PF - 16-bit 40MIPS MCU 64KB Flash 100-TQFP | Microchip

The Microchip Technology PIC24HJ64GP510-I/PF is a 16-bit PIC24H microcontroller delivering 40 MIPS of CPU throughput from a 64 KB (22K x 24) on-chip Flash program memory and 8 KB RAM, housed in a 100-pin TQFP (14x14 mm) package. It integrates a rich peripheral set including multiple UART, SPI, I2C, ECAN, and a 16-bit timer/analogue block, targeting general-purpose embedded control in industrial and consumer systems. A 16-bit microcontroller (MCU) is an integrated circuit combining a 16-bit CPU core, program memory, data memory, and on-chip peripherals into a single silicon die. It occupies the middle tier of the MCU taxonomy (8-bit MCU -> 16-bit MCU -> 32-bit MCU -> microprocessor) within the broader embedded computing hierarchy, sitting alongside DSP and ASIC controllers. The PIC24H family in particular sits between Microchip's PIC24F (low-power) and dsPIC33F (DSP-enabled) families, sharing the same instruction set for seamless code migration. Key features include 40 MIPS execution from a 40 MHz oscillator with hardware multiply/divide, 16-channel 10/12-bit ADC, two UART modules with IrDA support, two SPI ports, an I2C port, and an ECAN module for industrial networking. The 100-pin TQFP exposes up to 85 digital I/O lines, an external memory interface (EPMP), and a Parallel Master Port, giving designers the headroom to drive TFT displays or external bus peripherals without an additional ASIC. Architecturally, the PIC24H uses a modified Harvard core with a 24-bit instruction word and 16-bit data path, providing predictable single-cycle execution for DSP-style routines. Its 5-volt tolerant I/O, integrated voltage regulator (2.5-3.3V core from a 3.0-3.6V supply), and rich interrupt controller make it well suited to noisy industrial environments, while the JTAG/ICSP debug interface shortens firmware bring-up. Typical applications include industrial motor control, HVAC and building automation, medical patient monitoring, USB peripherals, and graphical user interface (GUI) controllers using the EPMP to drive TFT LCDs. The wide peripheral mix also suits automotive body-electronics and 24V industrial sensor hubs. For designs needing drop-in migration to higher Flash density, the PIC24HJ128GP510 family adds 128 KB Flash in the same 100-TQFP footprint. When designing, validate the 3.3V supply decoupling (10 uF + 0.1 uF bulk + bypass per VDD/VSS pair) and keep the analog AVSS/AVDD pair star-grounded to the regulator. The 'I' suffix indicates the industrial -40C to +85C temperature range, suitable for non-automotive outdoor and factory-floor enclosures. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt

PIC24HJ64GP510A-E/PF

PIC24HJ64GP510A-E/PF - 40 MIPS 16-Bit MCU 64KB Flash | Microchip

The Microchip Technology PIC24HJ64GP510A-E/PF is a 16-bit microcontroller from the PIC24H family, delivering 40 MIPS (Million Instructions Per Second) of processing performance with 64 KB of on-chip Flash program memory in a 100-pin TQFP (14x14 mm) package. The device is designed for high-speed, repetitive computational and control tasks, and features an enhanced 16-bit modified Harvard architecture with a 16x16-bit hardware multiplier that supports DSP-oriented operations in firmware. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash and SRAM), and a range of peripherals into one package. Within the broader taxonomy, the PIC24HJ family sits under 16-bit microcontrollers, which in turn belong to the embedded microcontroller category and the larger semiconductor / integrated circuit hierarchy. The 16-bit class is positioned between 8-bit MCUs (lower cost, lower performance) and 32-bit MCUs (higher performance, more complex toolchain), making it ideal for applications that need more computational headroom than 8-bit parts can provide without paying the full cost of a 32-bit Arm Cortex-M design. Key features of the PIC24HJ64GP510A include a 40 MHz maximum operating frequency, 8 KB of SRAM, two 16-bit timers, a 16-channel 10-bit Analog-to-Digital Converter (ADC) sampling up to 500 ksps, two UART modules, two SPI interfaces, and two I2C peripherals. The device operates from a 3.0 V to 3.6 V supply (3.3 V nominal) and is specified over the extended -40 C to +125 C industrial temperature range, marked by the "E" suffix. The "-E/PF" package code indicates a TQFP-100 (PF) industrial-grade part. Technically, the PIC24HJ family is pin-compatible with the dsPIC33F digital signal controller family and shares a high degree of compatibility with the dsPIC30F family, enabling straightforward migration when DSP performance or a different peripheral mix is required. On-chip peripherals are mapped through a flexible peripheral pin-select architecture, and 32 kHz low-power oscillator modes support RTC and low-power applications. Typical applications include industrial control systems, motor control (BLDC and stepper), power conversion and digital power, multi-loop PID controllers, sensor signal conditioning, and embedded networking gateways. The wide operating temperature range and rich peripheral set also suit automotive body controllers, HVAC controllers, and industrial sensor interfaces. When designing with this part, ensure the 3.3 V rail is well decoupled with bulk and 100 nF ceramic capacitors placed close to the VDDCORE, VDD and AVdd pins. Because the part supports JTAG/ICSP and two programming/debug pins (PGECx/PGEDx), reserve a 6-pin or RJ-11 debug header on the board for in-circuit programming and debugging with MPLAB tools. This page synthesizes distributor stock and pricing, Microchip-validated drop-in alternatives, and practical design notes not aggregated on any single datasheet or distributor page.

Angebot Kontakt

PIC24HJ64GP510A-E/PT

PIC24HJ64GP510A-E/PT - 16-bit 40MIPS MCU 64KB Flash TQFP-100 | Microchip

The Microchip PIC24HJ64GP510A-E/PT is a 16-bit microcontroller from the PIC24H family, delivering up to 40 MIPS performance with 64 KB Flash and 8 KB RAM in a 100-pin TQFP (12x12 mm) package, qualified to the automotive AEC-Q100 standard. The PIC24H family uses a 16-bit modified Harvard architecture with a single-cycle 40 MHz CPU and DSP-friendly instructions, making it suitable for high-speed repetitive computation, closed-loop control, and signal-processing tasks. The extended (-E) temperature grade spans -40C to +125C, supporting under-hood and industrial deployments. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash), working RAM, and a rich set of peripherals (timers, ADC, communication controllers, GPIO). The PIC24H family belongs to the 16-bit MCU class, sitting between 8-bit MCUs (PIC16/PIC18) and 32-bit MCUs (PIC32) in Microchip's portfolio. The 16-bit datapath doubles arithmetic throughput versus 8-bit parts while preserving deterministic interrupt latency and a simple programming model. Key features include 64 KB (22K x 24 instruction words) of self-programmable Flash, 8 KB SRAM, a 16-channel 10/12-bit ADC with 500 ksps conversion rate, multiple UART/SPI/I2C/CAN interfaces, and a 16-bit timer/capture/PWM module set. The device has 85 I/O pins and operates from 3.0-3.6 V, consuming roughly 60 mA active at 40 MHz. DMA moves data between peripherals and memory without CPU intervention, freeing cycles for control loops. The Enhanced CAN (ECAN) module provides automotive bus connectivity. The architecture combines a hardware multiply/divide unit with a 40 MHz oscillator and a PLL that yields zero-wait-state Flash execution. Compared with the older dsPIC30F family, the PIC24HJ family shares a high degree of peripheral compatibility, easing migration of legacy code while offering higher CPU throughput and lower active current. Boundary scan (JTAG) and 6 hardware breakpoints (with ordered halting) simplify in-circuit debug. Typical applications include automotive body and chassis controllers, industrial motor drives, sensor fusion front-ends, HVAC control, solar inverter control loops, and uninterruptible power supply (UPS) digital control. The combination of DSP-grade math, on-chip CAN, and AEC-Q100 qualification also suits traction inverter sensor boards and battery management secondary protection circuits. Designers should verify the 3.3 V rail decoupling network (typically 10 uF bulk plus 100 nF per VDD/AVDD pair) and keep analog/digital ground returns separated under the part. Programming uses ICSP via PGECx/PGEDx pins - ensure these are not multiplexed to noisy signals during development. This page aggregates distributor pricing, drop-in alternatives, and design notes not consolidated in the manufacturer datasheet.

Angebot Kontakt

PIC24HJ64GP510A-I/PF

PIC24HJ64GP510A-I/PF - 16-bit MCU 64KB Flash 40MIPS 100-TQFP | Microchip

The Microchip Technology PIC24HJ64GP510A-I/PF is a 16-bit microcontroller from the PIC24H family, featuring a 40 MIPS modified Harvard architecture CPU core, 64 KB of Flash program memory, and 8 KB of RAM in a 100-pin TQFP (PF) package measured at 14x14 mm. The device operates from 3.0 V to 3.6 V, integrates a 16-channel 10/12-bit ADC with 500 ksps throughput, and includes two UART, two SPI, one I2C, and one CAN 2.0B interface. Industrial temperature range spans -40 C to +85 C. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals; the PIC24H is a 16-bit MCU family optimized for high-speed control and DSP-like signal processing. PIC24H devices are pin-compatible with the dsPIC33F family, allowing seamless firmware migration between general-purpose MCU (PIC24H) and DSP-enhanced (dsPIC33F) variants on the same PCB layout. Within the broader taxonomy, the PIC24HJ64GP510A-I/PF is a 16-bit MCU -> CISC MCU -> RISC-style MCU -> embedded controller -> semiconductor. Key features of the PIC24HJ64GP510A-I/PF include 64 KB (22K x 24) Flash organized as instruction words, 8 KB SRAM, hardware multiplier for single-cycle MAC operations, 5 16-bit timers, 8 PWM outputs, an RTCC, and an ICSP/ICD debugging interface. The 40 MIPS performance at 40 MHz provides deterministic real-time control suitable for motor control, power conversion, and high-speed sensor interfacing. Architecturally, the device uses a modified Harvard core with separate instruction and data buses, a 16-element working register array, and a hardware multiply/divide engine. The 10/12-bit ADC includes dual Sample-and-Hold and 4x simultaneous sampling modes; the CAN 2.0B module supports standard and extended identifiers. Three operating modes (Run, Idle, Sleep) and an on-chip LDO provide flexible power management. Typical applications include industrial motor control (BLDC, PMSM, stepper), HVAC variable-frequency drives, automotive body and chassis ECUs, solar inverters and MPPT controllers, and CAN-based sensor networks. Designers favor this part for its robust peripheral set, mature MPLAB toolchain, and dual-role flexibility vs dsPIC33F. When designing with this MCU, reserve PGECx/PGEDx pairs as matched ICSP pairs - PGEC2 must be paired with PGED2, not mixed. Connect all VDD/VSS pins even if seemingly unused, since floating rails can disrupt programming and ADC reference integrity. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes that are not consolidated in the manufacturer datasheet.

Angebot Kontakt

PIC24HJ64GP510A-I/PT

PIC24HJ64GP510A-I/PT - 16-Bit 40 MIPS 64KB Flash MCU | Microchip

The Microchip Technology PIC24HJ64GP510A-I/PT is a 16-bit PIC24H microcontroller delivering 40 MIPS CPU performance with 64 KB of Flash program memory and 8 KB of SRAM, housed in a 100-pin TQFP (12x12 mm) package. It operates from a 3.0V to 3.6V supply and integrates a 16-channel 12-bit ADC, multiple UART/SPI/I2C peripherals, DMA, and motor-control PWM. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile data memory (RAM), and peripherals such as ADC, timers, and communication interfaces. Within the broader taxonomy, the PIC24HJ64GP510A belongs to the 16-bit MCU class, which sits between 8-bit MCUs (e.g., PIC16) and 32-bit MCUs (e.g., PIC32) in performance and addressable memory. The PIC24H family specifically targets high-speed control loops and DSP-adjacent signal processing, while remaining pin-compatible with the dsPIC33F family for migration flexibility. Key differentiating features include the 16-bit modified Harvard architecture with a single-cycle 16x16 multiply, 8 KB RAM (4x the size of typical 8-bit MCUs at this package), 4 DMA channels for offloading CPU data movement, and an integrated 12-bit ADC with 500 ksps sampling. The 40 MIPS throughput is sufficient for closed-loop motor control, digital power conversion, and sensor fusion applications that would otherwise require a 32-bit MCU. Architecturally, the PIC24HJ64GP510A uses a 16-bit data path with separate program and data buses, allowing instruction fetch and data access in the same cycle. The peripheral set includes a 16-bit motor-control PWM module with up to 6 outputs, 5 16-bit timers, two UART modules, two SPI, and two I2C interfaces, providing flexibility in mixed-signal designs. Typical applications include industrial motor drives, digital power supplies, sensor conditioning, building automation, and medical instrumentation. The wide operating temperature range and rich peripheral set also suit it for automotive body and chassis subsystems. Designers should note that this MCU requires an external crystal or oscillator for accurate timing and that the ADC reference voltage directly impacts conversion accuracy. Always consult the Microchip family datasheet for pinout, peripheral multiplexing, and programming-ICSP connections when migrating code from PIC24FJ or dsPIC33F devices. This page synthesizes distributor pricing, drop-in alternatives from the PIC24H/dsPIC33F family, and practical design notes not found in the manufacturer datasheet summary.

Angebot Kontakt

PIC24HJ64GP510AT-I/PF

PIC24HJ64GP510AT-I/PF - 16-bit 40MIPS MCU, 64KB Flash, 100-TQFP | Microchip

The Microchip Technology PIC24HJ64GP510AT-I/PF is a 16-bit PIC24H microcontroller IC executing up to 40 MIPS from 64KB (22K x 24) of on-chip Flash program memory, packaged in a 100-pin TQFP (14x14 mm). It belongs to the PIC24H high-performance 16-bit MCU family that uses a modified Harvard RISC architecture with a 16-bit wide datapath and 24-bit instruction words. What is a PIC24H microcontroller? A PIC24H is a 16-bit RISC microcontroller from Microchip's dsPIC33F/PIC24H product line that combines DSP-class computational throughput with general-purpose MCU peripherals. It sits in the microcontroller taxonomy as follows: microcontroller -> MCU -> 16-bit MCU -> PIC24H -> dsPIC33F/PIC24H family. These devices are pin-compatible with the dsPIC33F family and code-compatible with the PIC24F/PIC24E families, enabling designers to migrate designs across performance points without PCB rework. Key features of the PIC24HJ64GP510AT-I/PF include 40 MIPS sustained throughput from a 40 MHz internal oscillator, 64KB Flash (22K x 24 instruction words) plus 8KB RAM, an integrated CAN 2.0B controller, multiple UART/SPI/I2C peripherals, a 16-channel 10/12-bit ADC, and a 100-pin TQFP industrial-temperature (-40C to +85C) package. The 'A' suffix indicates an improved silicon revision; the 'T' indicates tape-and-reel packaging; the 'I' indicates industrial temperature grade; and the '/PF' suffix specifies the 100-TQFP 14x14 mm package. Technical depth: the PIC24H core provides a single-cycle 16x16 hardware multiplier and a 40-bit accumulator, enabling single-cycle MAC operations suitable for closed-loop control. The MCU operates from 3.0V to 3.6V (3.3V nominal) and supports 5V-tolerant digital inputs on most pins. An on-chip programmable PLL multiplies the external oscillator to 40 MHz core clock with 40 MIPS instruction throughput. Typical applications include industrial motor control, digital power conversion (DPFC), uninterruptible power supplies (UPS), advanced sensor conditioning, automotive body/comfort ECUs, and CAN-connected factory sensor nodes. The integrated CAN 2.0B peripheral makes the device a strong fit for industrial fieldbus and CAN-based distributed control systems. Design consideration: when migrating between PIC24H, PIC24F, and dsPIC33F parts, verify peripheral pin assignment tables in the device datasheet because peripheral function mapping (PPS) is not always 1:1 across families. For new designs, also note that this PIC24H part uses the legacy PIC24H instruction set and MPLAB IDE v8 toolchain; newer designs typically migrate to dsPIC33A or PIC24F-GU families for active support. This page synthesizes DigiKey pricing, drop-in same-package alternatives, parametric comparisons, and practical design notes not found in the manufacturer datasheet alone.

Angebot Kontakt

PIC24HJ64GP510AT-I/PT

PIC24HJ64GP510AT-I/PT - 16-bit 40MIPS 64KB Flash MCU TQFP-100

The Microchip Technology PIC24HJ64GP510AT-I/PT is a 16-bit RISC PIC24H microcontroller delivering 40 MIPS performance with 64 KB (22K x 24) of Flash program memory in a 100-pin TQFP (12x12 mm) package, designed for high-speed control and DSP-adjacent applications. Operating from a 3.0 V to 3.6 V supply, the part integrates 85 general-purpose I/O, 8 KB RAM, and a rich peripheral set including 16-bit timers, input capture, output compare, 10/12-bit ADC, UART, SPI, I2C, and ECAN. What is a PIC24H microcontroller? The PIC24H family belongs to Microchip's 16-bit microcontroller portfolio, sitting architecturally between the 8-bit PIC16/PIC18 lines and the 32-bit PIC32 line in the company's product hierarchy: PIC16/18 -> 16-bit (PIC24, dsPIC30/33) -> 32-bit (PIC32) -> embedded MCU. Built around a modified Harvard architecture with a 16-bit wide data path and a 24-bit instruction word, the PIC24H series combines deterministic interrupt handling with DSP-friendly instructions, filling the gap between classic 8-bit MCUs and full DSP processors. Key features include 40 MIPS sustained throughput from a 40 MHz oscillator (with 4x PLL multiplier), 64 KB Flash supporting ICSP, 8 KB SRAM, and a 16-channel 10/12-bit ADC capable of 500 ksps conversion. The device includes a 16-bit Enhanced Parallel Master Port (EPMP) for external memory or graphics interfaces, hardware multipliers supporting single-cycle 16x16 multiplication, and a Real-Time Clock and Calendar (RTCC) module for timekeeping. The PIC24HJ64GP510AT-I/PT uses a 5-stage pipeline and supports C-compiler-efficient addressing modes for embedded control code. Its instruction set is shared with the dsPIC33F family, meaning the same peripheral libraries and MPLAB XC16 toolchain code can be ported directly. The industrial-grade -40C to +85C operating range supports deployment in factory automation, motor control, and industrial sensor systems. Typical applications include industrial motor control (BLDC, PMSM, stepper), sensor signal processing, CAN-based distributed control nodes, and human-machine interface (HMI) panels. With ECAN and USB-OTG (Full-Speed) options in the family plus EPMP for TFT-LCD panels, the PIC24HJ64GP510A is well matched to graphical industrial controllers and automotive body/comfort ECUs. When designing with this part, ensure the core supply (VDD) and ADC/digital I/O rails are decoupled with 100 nF + 10 uF bulk capacitance placed within 5 mm of the pins. The Vcap pin requires a low-ESR 10 uF ceramic for internal regulator stability. Program via ICSP using PGECx/PGEDx, and select the proper oscillator mode (HS + PLL for 40 MIPS, XT for lower power). This page synthesizes distributor pricing, drop-in compatible PIC24H/dsPIC33F alternatives, and practical design notes not found in the bare datasheet, giving engineers a one-stop comparison resource.

Angebot Kontakt

PIC24HJ64GP510T-I/PF

PIC24HJ64GP510T-I/PF - 16-bit MCU 64KB Flash 100-TQFP | Microchip

The Microchip Technology PIC24HJ64GP510T-I/PF is a high-performance 16-bit microcontroller from the PIC24H family, featuring a 40 MIPs (Million Instructions Per Second) modified Harvard CPU core with 64KB (22K x 24) of Flash program memory and 8KB of RAM, housed in a 100-pin TQFP (14x14 mm) package supplied on tape-and-reel. The 'T' suffix indicates tape-and-reel packaging while '-I' marks the industrial temperature grade of -40C to +85C, and the 'PF' package code identifies the 14x14 mm 100-lead TQFP. A 16-bit PIC microcontroller is a microcontroller built around a 16-bit modified Harvard architecture, meaning it has separate program and data buses that allow simultaneous instruction fetch and data access. Within the broader taxonomy, a PIC24H device belongs to: microcontroller -> embedded MCU -> 16-bit MCU -> DSC-capable PIC -> power management & motor control family. The PIC24H architecture shares pin compatibility with the dsPIC33F Digital Signal Controller family, enabling software migration to DSP-capable variants without PCB rework. Key features of the PIC24HJ64GP510T-I/PF include 16-channel 10-bit or 12-bit ADC, multiple UART/SPI/I2C peripherals, motor-control PWM with up to 8 channels, and a 16-bit wide data path that accelerates arithmetic and DSP-like operations compared with traditional 8-bit MCUs. The device operates from 3.0V to 3.6V and integrates a high-speed 40 MHz internal oscillator, on-chip debugger support via PGECx/PGEDx pairs, and a wide peripheral set optimized for real-time control. The 100-pin TQFP footprint offers abundant I/O for multi-sensor or multi-axis motor control, while the 8KB RAM supports meaningful data buffers without external memory. Industrial-grade temperature range makes the part suitable for factory floor and outdoor enclosures. Typical applications include AC induction motor control (V/F and vector), three-phase power inverters, industrial sensor aggregation, BLDC/PMSM motor drives, and general-purpose 16-bit embedded control. The PIC24H CPU delivers deterministic interrupt latency, critical for closed-loop control loops. When designing with this part, ensure 3.3V analog supply decoupling is adequate and that the PGECx/PGEDx pair is routed symmetrically to the debug header. The 100-TQFP requires a 14x14 mm land pattern with 0.5 mm pitch. This page consolidates verified distributor pricing, drop-in same-package alternatives, and design notes beyond what the manufacturer datasheet provides, supporting sourcing decisions for new designs and BOM risk mitigation.

Angebot Kontakt

PIC24HJ64GP510T-I/PT

PIC24HJ64GP510T-I/PT - 40 MIPS 16-Bit MCU 64KB Flash 100-TQFP | Microchip

The Microchip Technology PIC24HJ64GP510T-I/PT is a high-performance 16-bit PIC24H microcontroller delivering 40 MIPS throughput at 40 MHz core clock, with 64 KB (22K x 24) of Flash program memory and 8 KB of RAM, housed in a 100-pin TQFP (12x12 mm) package. It is the tape-and-reel (T-suffix) industrial-temperature (-40C to +85C) variant of the PIC24HJ64GP510 family, designed for high-speed control and DSP-style repetitive computation tasks. A PIC24 16-bit microcontroller is a RISC-class Harvard-architecture MCU that fuses a 16-bit CPU with DSP-friendly instructions, sitting between 8-bit PIC MCUs and 32-bit ARM Cortex-M parts in Microchip's portfolio. The PIC24H series specifically targets motor control, power conversion, and real-time signal processing where deterministic interrupt latency and single-cycle MAC operations are valuable. Within the broader taxonomy, PIC24H belongs to the PIC24 family > 16-bit MCU > microcontroller > embedded processor > semiconductor. Key features of the PIC24HJ64GP510 include: 16-channel 10-bit/12-bit ADC (1 MSPS) with dual sample-and-hold, four UART modules, two SPI interfaces, two I2C ports, two CAN 2.0B modules, a Parallel Master Port (PMP), five 16-bit timer/counters, and a hardware Real-Time Clock/Calendar (RTCC). The 100-TQFP exposes up to 85 digital I/O pins, suiting data-acquisition front-ends and human-machine-interface controllers. Architecturally, the PIC24HJ64GP510 uses a 16-bit modified Harvard core with a 24-bit instruction word and a 16-bit data path, supported by a 17 x 17-bit hardware multiplier and 40-bit accumulator that enable single-cycle MAC operations. The on-chip regulator produces a stable 1.8V core from a 3.0-3.6V supply; the 64 KB Flash supports self-programming under firmware control, enabling in-field OTA-style updates. Typical applications include industrial motor control (BLDC, PMSM, AC induction drives), switch-mode power supplies with digital control loops, automotive body and sensor interfacing, medical patient monitoring, and high-speed data-acquisition front-ends. Designers favour the PIC24HJ64GP510 when deterministic 40 MIPS performance and CAN connectivity are required without migrating to a 32-bit architecture. When designing with this part, budget the I/O pin budget carefully: 100-TQFP exposes 85 I/O but some are remapped when peripheral modules are enabled. Provide a 10 uF bulk plus 0.1 uF decoupling pair close to every VDDCORE pin, and respect the in-circuit serial programming (ICSP) pin pair (PGECx/PGEDx) by keeping them accessible for production-line programming and debug. This page synthesises distributor pricing, drop-in same-family alternatives, and practical design notes that go beyond the manufacturer datasheet - including package-marking decode, pinout annotation, and tape-and-reel versus tray logistics.

Angebot Kontakt

PIC32CM1216MC00032-E/RTB

PIC32CM1216MC00032-E/RTB - 48MHz Cortex-M0+ 128KB MCU | Microchip

The Microchip Technology PIC32CM1216MC00032-E/RTB is a 32-bit ARM Cortex-M0+ microcontroller from the PIC32CM MC00 family, featuring 128KB Flash and 16KB SRAM in a 32-pin VQFN (5x5 mm) package with 48MHz CPU clock. It is engineered for 5V operation in noisy consumer, commercial, industrial, and automotive environments with integrated motor-control peripherals including PDEC, TCC waveform outputs, and analog comparators. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash for code, SRAM for data), and programmable peripherals on one die. The PIC32CM MC00 family uses the ARM Cortex-M0+ core — a 32-bit, von-Neumann architecture optimized for low power and deterministic interrupt response, making it the smallest and most energy-efficient member of the Cortex-M family. The 'PIC32CM' prefix places this device within Microchip's 5V-tolerant MCU portfolio aimed at industrial and automotive motor control. Key features include a 12-channel DMA controller, 12-channel Event System, 16-channel ADC, 10-channel Analog Comparator (AC), 2-channel DAC, 6 SERCOM modules (configurable as UART/SPI/I2C), 4 TC and 3 TCC waveform output timers, a Configurable Custom Logic (CCL) block, and a Peripheral Event Controller (PDEC) for quadrature decoding. It also integrates a temperature sensor and operates across the -40C to +125C extended temperature range. The Cortex-M0+ core uses the Thumb-2 instruction subset, providing 0.93 DMIPS/MHz while keeping the silicon area small. The PDEC hardware block offloads quadrature encoder counting from the CPU, enabling precise motor-speed loops without software overhead — critical for BLDC and PMSM motor control. SERCOM reconfiguration lets one peripheral serve as UART, SPI, or I2C, reducing BOM cost and giving board designers pin-out flexibility. Typical applications include BLDC/PMSM motor drives, sensorless fan controllers, small appliance pumps, HVAC damper actuators, and LIN-node automotive body modules. The 5V-tolerant I/O directly interfaces with industrial 24V systems via external transceivers, eliminating level shifters. When designing with this device, dedicate PCB ground copper under the exposed thermal pad and route motor-phase signals away from the crystal to avoid EMI coupling. Use the MPLAB X IDE with the MPLAB Harmony v3 framework for peripheral configuration and motor-control code generation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt

PIC32CM1216MC00032-I/PT

PIC32CM1216MC00032-I/PT - 48MHz Cortex-M0+ MCU 128KB Flash TQFP-32 | Microchip

The Microchip Technology PIC32CM1216MC00032-I/PT is a 32-bit ARM Cortex-M0+ microcontroller from the PIC32CM MC family, operating at up to 48 MHz and integrating 128KB of Flash and 16KB of SRAM in a 32-pin TQFP (7x7 mm) package with industrial operating temperature range -40C to +85C. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and programmable peripherals into one package. Within the broader semiconductor taxonomy, this PIC32CM MC belongs to the Cortex-M0+ microcontrollers -> 32-bit microcontrollers -> microcontrollers (MCU) -> microcontrollers & processors -> integrated circuits hierarchy. The PIC32CM MC family is specifically designed for motor control, consumer, commercial, industrial and automotive applications in electrically noisy environments, with robust 5V-tolerant I/O. Key features include the ARM Cortex-M0+ core (Thumb-2 instruction set, single-cycle multiplier), 128KB Flash, 16KB SRAM, dedicated motor-control peripherals (PWM, QEI), up to 48 MHz operation, multiple SERCOM serial interfaces, LIN support, and 5V-tolerant I/O. The 5V tolerance allows direct interface with legacy analog and 5V logic without level shifters, which is uncommon in modern Cortex-M0+ devices and a strong differentiator. The architecture uses a Harvard-style bus with separate Flash and SRAM channels, allowing simultaneous instruction fetch and data access. Hardware-level single-cycle GPIO access enables fast deterministic I/O toggling for motor commutation, while a low-power sleep mode with RTC retention suits battery-backed applications. The integrated Crypto/Security region (in some family members) and true random number generator support secure boot use cases. Typical applications include BLDC/PMSM motor control (small fans, pumps, appliance motors), 5V industrial sensor conditioning, LIN nodes in automotive body and comfort networks, consumer appliance control boards, and general purpose 5V embedded control replacing PIC16/PIC24 designs. The wide operating voltage range and 5V I/O make it ideal for drop-in upgrades of legacy 5V designs that cannot tolerate 3.3V-only MCUs. Key design considerations: the 'I' suffix indicates -40C to +85C industrial temperature range; the 'PT' suffix indicates TQFP-32. Use MPLAB X IDE and the PIC32CM MC00 Curiosity Nano Evaluation Kit (EV10N93A) for development. The device requires an external decoupling network; place a 100 nF X7R ceramic capacitor within 3 mm of each VDD pin and a 4.7 uF bulk capacitor near the MCU. This page synthesizes verified distributor pricing, drop-in same-package alternatives and practical design notes for the PIC32CM1216MC00032-I/PT that are not consolidated on the manufacturer datasheet alone.

Angebot Kontakt

PIC32CM1216MC00032-I/RTB

PIC32CM1216MC00032-I/RTB - 48MHz Cortex-M0+ 128KB MCU | Microchip

The Microchip Technology PIC32CM1216MC00032-I/RTB is a 32-bit ARM Cortex-M0+ microcontroller from the PIC32CM MC00 family, delivering 48 MHz CPU performance with 128 KB of Flash and 16 KB of SRAM in a 32-pin VQFN (5x5 mm) package. It is engineered for 5 V operation in noisy consumer, commercial, industrial, and automotive environments, integrating motor-control peripherals alongside robust serial communication. What is a 32-bit microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), volatile memory (SRAM), and peripheral interfaces. The PIC32CM MC00 family uses the ARM Cortex-M0+ core, the smallest and most energy-efficient 32-bit core in the ARM family, offering deterministic interrupt response and Thumb-2 instruction set efficiency. Within the broader taxonomy, this part is a Cortex-M0+ MCU -> ARM MCU -> 32-bit MCU -> microcontroller -> semiconductor. Key features include 128 KB Flash, 16 KB SRAM, 48 MHz core clock, integrated motor-control PWM, SERCOM (serial communication) peripherals with LIN support, and a wide operating voltage range suited for 5 V systems. The 32-VQFN (5x5) package exposes a generous set of I/O pins while keeping the PCB footprint under 25 mm², ideal for compact motor-control and industrial designs. Technically, the device is built on a low-power CMOS process and includes an on-chip debugger, multiple timers, ADC, and motor-control PWMs. Hardware-level features such as brown-out detect, watchdog timer, and clock failure detection improve reliability in electrically noisy motor-drive environments where stray inductance and back-EMF can corrupt logic signals. Typical applications include BLDC and PMSM motor control, HVAC fan/pump controllers, appliance control boards, small industrial drives, and LIN-attached body-control nodes. The combination of 5 V tolerance and integrated motor-control peripherals simplifies mixed-signal PCB design. When designing with this part, verify that your motor-control algorithm (FOC, trapezoidal, or sensorless) is supported by the available PWMs and ADCs. Decoupling, ground returns, and proper PCB layout for high-current switching traces are essential for EMC compliance.

Angebot Kontakt

PIC32CM1216MC00032T-E/PT

PIC32CM1216MC00032T-E/PT - 48MHz Cortex-M0+ MCU 128KB Flash TQFP-32 | Microchip

The Microchip Technology PIC32CM1216MC00032T-E/PT is an ARM Cortex-M0+ based 32-bit microcontroller in the PIC32CM MC family, integrating 128 KB of Flash and 16 KB of SRAM, and packaged in a 32-pin TQFP (7x7 mm) operating over a 2.7 V to 5.5 V supply range. The device runs at up to 48 MHz and targets consumer, commercial, industrial and automotive applications in electrically noisy environments, with motor-control features and LIN support integrated on-chip. This variant is the tape-and-reel ("T") shipping form, in the "E" extended temperature grade, suitable for production reel assembly. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (typically Flash), data memory (SRAM), and a rich set of peripherals (timers, communication controllers, ADC, GPIO) into one IC. The Cortex-M0+ is the smallest and most energy-efficient core in the ARM Cortex-M family, balancing deterministic real-time performance with low power and a tiny silicon footprint. Within Microchip's taxonomy, the PIC32CM MC line slots under PIC32-bit MCUs -> microcontrollers -> integrated circuits, and is specifically optimized for motor-control and LIN-connected nodes. Key differentiating specifications include 128 KB of Flash, 16 KB SRAM, 4 KB EEPROM emulation, 26 GPIO, an integrated Cortex-M0+ core at 48 MHz, and AEC-Q100 automotive qualification on certain ordering codes. The MC family adds motor-control PWM, a 12-bit ADC with hardware accumulation, and SERCOM-style configurable serial peripherals plus a LIN transceiver interface, enabling compact BLDC/PMSM drive and LIN slave designs without an external communication IC. Architecturally, the PIC32CM1216MC00032 uses a Harvard bus with single-cycle I/O access, an M0+ core with a single 32-bit multiplier, Nested Vectored Interrupt Controller (NVIC), and Microchip's Peripheral Touch Controller (PTC) and motor-control PWM (MCPWM) blocks. It supports up to 4 KB of independent EEPROM emulation in Flash and includes a 12-bit 1 Msps ADC. The E-grade version specifies -40C to +125C operation, matching the harsh-environment design intent called out in the family brief. Typical applications include BLDC and PMSM motor drives (small fans, appliance pumps, power tools), automotive LIN body and sensor nodes, industrial sensor signal conditioning with local control, and low-cost consumer appliances with capacitive touch user interfaces. The wide 2.7-5.5 V supply also permits direct 3.3 V or 5 V system designs without a second regulator. When designing with this part, reserve at minimum one UART for LIN, verify the MCPWM channel count matches your switch topology (3-phase vs 1-phase), and budget PCB area for the 32-pin TQFP's 0.8 mm pitch (hand-solderable but pitch-conscious). This page synthesizes distributor pricing, drop-in alternatives and practical design notes not all collected on the manufacturer product page.

Angebot Kontakt

PIC32CM1216MC00032T-E/RTB

PIC32CM1216MC00032T-E/RTB - 48MHz Cortex-M0+ MCU 128KB | Microchip

The Microchip Technology PIC32CM1216MC00032T-E/RTB is a 32-bit ARM Cortex-M0+ microcontroller from the PIC32CM MC family, featuring 128KB of Flash program memory and 16KB of SRAM in a 32-pin VQFN (5x5 mm) package with motor-control peripherals. The device runs at a 48MHz CPU clock and operates from a wide 2.7V to 5.5V supply, which makes it directly compatible with 3.3V and 5V system rails commonly used in industrial and consumer designs. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), working memory (SRAM), and a rich set of programmable peripherals on a single silicon die. The PIC32CM MC family in particular is positioned by Microchip as a 5V-tolerant Cortex-M0+ family for noisy environments, sitting in the broader taxonomy: microcontroller -> embedded processor -> semiconductor. This hierarchy is important because MCUs are the smallest programmable building block above fixed-function logic and below application processors (MPUs). Key features include 128KB Flash organized as 128K x 8, 16KB SRAM, and motor-control peripherals (PWM, ADC, quadrature decoder) integrated on-chip. The Cortex-M0+ core implements the ARMv6-M architecture with single-cycle I/O access, hardware multiply, and the Serial Wire Debug (SWD) interface. Communications peripherals include SERCOM modules that can be configured as UART, SPI, or I2C, plus LIN support for automotive sub-bus networks. The device also supports up to 125 degrees C operating temperature in the 'E' temperature grade (extended). Typical applications include BLDC/PMSM motor control for small fans, pumps, and appliances, LIN-connected body electronics, industrial sensor nodes with UART/SPI peripherals, LED lighting controllers, and low-cost consumer devices that require 5V I/O tolerance. The combination of 5V I/O tolerance and motor-control timers reduces external level-shifters and gate-driver complexity. When designing with this device, ensure the SWD pins are accessible for in-circuit programming and that the motor-control timer outputs are routed to pins that support PWM. The internal 48MHz oscillator is factory-trimmed and is sufficient for many applications, but motor-control loops may benefit from a higher-accuracy external crystal.

Angebot Kontakt

PIC32CM1216MC00032T-I/PT

PIC32CM1216MC00032T-I/PT - 48MHz Cortex-M0+ MCU, 128KB Flash, 32-TQFP | Microchip

The Microchip Technology PIC32CM1216MC00032T-I/PT is a 32-bit ARM Cortex-M0+ microcontroller from the PIC32CM MC00 family, running at up to 48 MHz with 128 KB of Flash, 16 KB of SRAM, and 4 KB of EEPROM. It is housed in a 32-pin TQFP (7x7 mm) package and operates from 2.7V to 5.5V with 26 general-purpose I/O pins. The device is qualified for the -40C to +85C industrial temperature range and targets motor control and noisy-environment applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), non-volatile data storage (EEPROM), and a rich set of peripherals (timers, ADC, communication ports). MCUs sit at the heart of nearly every embedded system, from sensor nodes to appliance controllers. The Cortex-M0+ core (from the broader ARM Cortex-M family of 32-bit processor cores) provides a Thumb-2 instruction set and deterministic interrupt response while consuming very little active and sleep current. Key features of this part include a 48 MHz maximum CPU clock, a 12-bit ADC, multiple SERCOM (Serial Communication) interfaces that can be configured as UART, SPI, or I2C, an advanced motor-control PWM peripheral (PWM with 24-bit resolution and complementary outputs with dead-band insertion), LIN support, and configurable logic cells. The integrated Cortex-M0+ core also enables the use of the standard ARM ecosystem: CMSIS drivers, middleware, and tools, while Microchip provides MPLAB X IDE, MPLAB Harmony, and the MCC pin manager. From a technical perspective the PIC32CM MC00 family uses a single-cycle hardware multiplier, a Nested Vectored Interrupt Controller (NVIC), and the Microchip proprietary Peripheral Touch Controller (PTC) for capacitive sensing. The dual-bank Flash with live update support allows firmware upgrades without downtime, which is valuable in field-deployed industrial nodes. The 4 KB EEPROM emulated in Flash provides endurance and retention suitable for storing calibration, configuration, and runtime data. Typical applications include BLDC and brushed DC motor drives, consumer appliances, industrial control boards, HVAC fan control, automotive body and convenience ECUs (LIN slaves), capacitive-touch user interfaces, and 5V-tolerant sensor hubs. The 5V-tolerant I/O and 2.7V-5.5V supply range also suit legacy 5V industrial designs where 3.8V-only Cortex-M0+ parts cannot be used directly. When designing with this MCU, ensure the supply decoupling network includes at least one 100 nF ceramic capacitor per VDD pin placed as close to the IC as possible, plus a bulk 10 uF capacitor on the main rail. For motor-control layouts keep the PWM traces short, separate analog and power grounds, and place at least one local decoupling cap per MOSFET gate-driver supply pin. This page consolidates distributor pricing, verified drop-in alternatives, and engineering design notes that are not aggregated on the manufacturer datasheet alone, supporting faster sourcing and design decisions for engineers evaluating the PIC32CM1216MC00032T-I/PT.

Angebot Kontakt

Unterkategorien

Produkte (32807)

PIC24HJ64GP504-I/ML - 40 MIPS 16-bit MCU, 64KB Flash, 44-QFN | Microchip

PIC24HJ64GP504-I/PT - 40 MIPS 16-bit MCU, 64KB Flash, 44-TQFP | Microchip

PIC24HJ64GP504T-I/ML - 16-bit 40MIPS MCU 64KB Flash 44-QFN | Microchip

PIC24HJ64GP504T-I/PT - 16-bit 40MIPS 64KB Flash MCU 44-TQFP | Microchip

PIC24HJ64GP506-E/PT - 16-bit 40MIPS MCU, 64KB Flash, 64-TQFP

PIC24HJ64GP506-I/PT - 16-bit 40 MIPS MCU 64KB Flash | Microchip

PIC24HJ64GP506A-E/MR - 16-bit 40MIPS 64KB Flash MCU | Microchip

PIC24HJ64GP506AT-I/MR - 16-bit 64KB Flash MCU, 40 MIPS, 64-VQFN

PIC24HJ64GP506T-I/PT - 16-bit 40MIPS MCU 64KB Flash 64-TQFP | Microchip

PIC24HJ64GP510-I/PF - 16-bit 40MIPS MCU 64KB Flash 100-TQFP | Microchip

PIC24HJ64GP510A-E/PF - 40 MIPS 16-Bit MCU 64KB Flash | Microchip

PIC24HJ64GP510A-E/PT - 16-bit 40MIPS MCU 64KB Flash TQFP-100 | Microchip

PIC24HJ64GP510A-I/PF - 16-bit MCU 64KB Flash 40MIPS 100-TQFP | Microchip

PIC24HJ64GP510A-I/PT - 16-Bit 40 MIPS 64KB Flash MCU | Microchip

PIC24HJ64GP510AT-I/PF - 16-bit 40MIPS MCU, 64KB Flash, 100-TQFP | Microchip

PIC24HJ64GP510AT-I/PT - 16-bit 40MIPS 64KB Flash MCU TQFP-100

PIC24HJ64GP510T-I/PF - 16-bit MCU 64KB Flash 100-TQFP | Microchip

PIC24HJ64GP510T-I/PT - 40 MIPS 16-Bit MCU 64KB Flash 100-TQFP | Microchip

PIC32CM1216MC00032-E/RTB - 48MHz Cortex-M0+ 128KB MCU | Microchip

PIC32CM1216MC00032-I/PT - 48MHz Cortex-M0+ MCU 128KB Flash TQFP-32 | Microchip

PIC32CM1216MC00032-I/RTB - 48MHz Cortex-M0+ 128KB MCU | Microchip

PIC32CM1216MC00032T-E/PT - 48MHz Cortex-M0+ MCU 128KB Flash TQFP-32 | Microchip

PIC32CM1216MC00032T-E/RTB - 48MHz Cortex-M0+ MCU 128KB | Microchip

PIC32CM1216MC00032T-I/PT - 48MHz Cortex-M0+ MCU, 128KB Flash, 32-TQFP | Microchip