Integrierte Schaltungen

PIC32MZ1024EFF100-E/GJX

PIC32MZ1024EFF100-E/GJX - 200MHz 32-bit MCU, 1MB Flash, 100-TFBGA | Microchip

The Microchip PIC32MZ1024EFF100-E/GJX is a high-performance 32-bit MIPS MCU from the PIC32MZ EF family, featuring a 200 MHz MIPS32 M-Class core, 1 MB of Flash, 256 KB of SRAM, and a 100-pin TFBGA (7x7 mm) package. It integrates a Floating Point Unit (FPU), HS USB, Ethernet MAC, CAN, and advanced analog peripherals, targeting industrial, automotive, IoT, graphics HMI, and motor-control designs. The device operates across an extended -40C to +125C junction temperature range and supports 3.3V I/O with on-chip regulators. A 32-bit microcontroller is an integrated circuit that combines a high-performance processor core, program memory, data memory, and a rich set of on-chip peripherals onto a single die. The PIC32MZ EF family in particular sits within the hierarchy MCU -> 32-bit MCU -> MIPS-based MCU -> Microchip PIC32 family -> embedded connectivity MCU. The "EF" suffix denotes the Embedded Connectivity with Floating Point Unit sub-family, which adds DSP extensions (four 64-bit accumulators, single-cycle MAC, saturating/fractional math) and IEEE 754 single/double-precision floating-point hardware acceleration. Engineers choose 32-bit MCUs like this when 8-bit or 16-bit cores run out of headroom for Ethernet stacks, USB, or graphics rendering. Key features include 200 MHz / 330 DMIPS core performance, 1 MB Flash program memory, 256 KB SRAM, a 12-bit 18 MSPS ADC with up to 40 analog inputs, four comparators, two I2S/SPI audio interfaces, six UART, four SPI, five I2C, parallel master port (PMP) for graphics, and an integrated Ethernet MAC plus HS USB 2.0 OTG. The 100-TFBGA (7x7 mm) package saves board area compared to 100-pin TQFP while providing the full peripheral set of the PIC32MZ EF family. Architecturally, the PIC32MZ EF family uses a 5-stage MIPS Warrior M-class pipeline with DSP extensions, an instruction cache and prefetch module, and a tightly-coupled Flash/SRAM memory system that delivers sustained throughput at 200 MHz. A multi-vector interrupt controller and dedicated DMA channels keep peripheral I/O off the CPU's critical path, which is essential for Ethernet, USB, and audio streaming workloads. Typical applications include industrial Ethernet gateways, HMI/graphics touch panels, automotive infotainment and telematics nodes, USB audio interfaces, motor-control FOCs, IoT edge nodes, and medical patient monitors. For graphics HMI, the PMP bus interfaces directly to TFT LCD controllers; for USB audio, the I2S/USB combination enables class-compliant headphone or DAC designs. When designing with this device, allocate the 1 MB Flash partition for bootloader (typically 64 KB), application, and an OTA image; the 256 KB SRAM is enough to hold TCP/IP sockets plus audio buffers but plan for double-buffering in display applications. Use the on-chip FPU to offload DSP math from the main loop in motor-control or audio pipelines. This page synthesizes distributor pricing, parametric comparisons, and drop-in compatible alternatives drawn from Microchip's PIC32MZ EF family datasheets - data not consolidated on any single distributor page.

USD $7,75 Auf Lager

PIC32MZ1024EFF100-E/PF

PIC32MZ1024EFF100-E/PF - 180MHz 1MB Flash MCU | Microchip

The Microchip Technology PIC32MZ1024EFF100-E/PF is a high-performance 32-bit MIPS MCU from the PIC32MZ EF family, featuring a 180 MHz core (200 MHz max on the -I grade), 1 MB of Flash and 256 KB of SRAM in a 100-pin TQFP (14x14 mm) package. What is a 32-bit MCU? A microcontroller (MCU) is a single-chip computer integrating a CPU core, memory (Flash for program code, SRAM for data), and peripherals (UART, SPI, I2C, ADC, timers, GPIO). 32-bit MCUs use a 32-bit data path and register width, allowing larger address spaces, higher throughput, and more efficient handling of complex algorithms than 8/16-bit parts. Within the taxonomy, the PIC32MZ EF belongs to: 32-bit MCU -> MIPS32 M-Class -> PIC32 family -> PIC32MZ sub-family -> PIC32MZ EF (Embedded Connectivity with FPU) line. These MCUs serve as the central intelligence in connected industrial, automotive, IoT, and human-machine interface (HMI) products. Key features of the PIC32MZ1024EFF100-E/PF include the MIPS32 M-Class core with hardware floating-point unit (FPU) for DSP-grade math, 1 MB Flash for code storage, 256 KB SRAM, integrated Ethernet MAC, USB 2.0 high-speed PHY, two CAN 2.0b controllers, six UART, four SPI, five I2C, I2S audio, a 12-bit 1.2 MSPS ADC with up to 48 channels, six PWM outputs, and a 32-bit real-time clock. The -E temperature grade supports -40C to +125C operation, suitable for industrial and automotive-grade environments. AEC-Q100 qualification is documented on the part per Hotenda listing. Typical applications include industrial Ethernet gateways and PLCs, IoT edge nodes with secure cloud connectivity, automotive body and infotainment ECUs, motor control (BLDC and PMSM FOC), and high-resolution graphical HMI displays with integrated LCD controllers. Extensive connectivity (Ethernet + USB + CAN + I2S) makes the part especially well-suited as a single-chip solution for connected embedded systems. Designers should note the 2.1 V to 3.6 V supply requirement, the 180 MHz max CPU speed for the -E grade (versus 200 MHz on -I grade), and the need for proper decoupling and trace impedance matching for the high-speed USB and Ethernet interfaces. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $8,95 Auf Lager

PIC32MZ1024EFF100-E/PT

PIC32MZ1024EFF100-E/PT - 32-bit 180MHz MCU, 1MB Flash TQFP-100

The Microchip Technology PIC32MZ1024EFF100-E/PT is a 32-bit MIPS32 M-Class PIC microcontroller IC operating at up to 180MHz with 1MB (1M x 8) Flash program memory, housed in a 100-pin TQFP (12x12mm) package. It is part of the PIC32MZ EF family, which targets connectivity applications in Industrial, automotive, IoT, Graphics/HMI, and Motor Control market segments, with up to 2MB Flash and 512KB SRAM available across the family. What is a PIC32 microcontroller? A PIC32 MCU is a 32-bit microcontroller from Microchip Technology based on the MIPS32 M-Class architecture (in the EF family) or, in newer variants, the Arm Cortex-M core. PIC32 microcontrollers belong to the broader category of 32-bit microcontrollers, which sit above 8-bit and 16-bit MCUs in compute, addressable memory, and peripheral integration. Within Microchip's portfolio, the PIC32 family bridges the gap between PIC16/PIC24 and the higher-end Arm-based SAM family, providing floating-point capability, large memory options, and high-speed connectivity peripherals. Key features of the PIC32MZ1024EFF100-E/PT include 1MB of Flash, 512KB of SRAM (family maximum), a 180MHz core clock (E grade variant), 78 I/O pins, HS USB, Ethernet MAC, advanced analog peripherals, and FPU support. The device runs from a 2.3V to 3.6V supply and is AEC-Q100 qualified for automotive applications. The integrated Floating Point Unit accelerates DSP and graphics workloads, while the 100-TQFP package balances pin count with through-hole-friendly or production-friendly SMT assembly. The PIC32MZ EF family architecture combines a 5-stage pipeline MIPS core with a rich peripheral set including multiple SPI, I2C, UART, CAN, and SQI interfaces. This makes the MCU suitable for complex connected systems where the CPU must service both high-bandwidth communication and real-time control loops simultaneously. The Live-Update Flash feature enables field firmware upgrades with fail-safe rollback. Typical applications include industrial Ethernet gateways, automotive infotainment and HMI panels, IoT edge nodes with USB and Ethernet connectivity, and graphical HMI controllers. Designers also use the PIC32MZ EF in motor control and audio processing subsystems where the FPU and DMA channels accelerate numeric workloads. When designing with this MCU, ensure the 12x12mm TQFP-100 PCB footprint includes adequate thermal copper for the 180MHz operating point, and use the MPLAB Harmony framework to accelerate peripheral driver development. The -E temperature grade (-40C to +125C) supports harsh industrial and automotive environments. This page synthesizes distributor pricing, same-brand and cross-brand drop-in alternatives from the PIC32MZ family, and practical design notes not found in the manufacturer datasheet alone.

USD $9,67 Auf Lager

PIC32MZ1024EFF100-I/GJX

PIC32MZ1024EFF100-I/GJX - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFF100-I/GJX is a high-performance 32-bit microcontroller from the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, running at up to 200 MHz with 1 MB of Flash and 256 KB of SRAM, packaged in a 100-ball TFBGA (GJX) measuring 7x7 mm. The device integrates a MIPS32 M-Class Warrior core with DSP enhancements, four 64-bit accumulators, single-cycle MAC, and an IEEE 754-compliant FPU delivering 330 DMIPS, while the no-crypto variant strips the hardware encryption engine to lower cost. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable peripherals. Within the broader taxonomy, the PIC32MZ EF belongs to the 32-bit MCU class, then to the MIPS-based MCU family, and finally to Microchip's connectivity-oriented EF sub-family that targets Internet-of-Topics applications in industrial, IoT, graphics/HMI, and motor-control markets. Key differentiating features include 200 MHz core speed, IEEE 754 hardware floating point, up to 2 MB Flash / 512 KB SRAM ceiling across the family, 12-bit ADC up to 18 MSPS, USB 2.0 High-Speed with PHY, 10/100 Ethernet MAC, dual CAN 2.0b controllers, and a dedicated graphics interface (GDMA/PU) suitable for color TFTs. The 100-pin TFBGA offers the densest package in the family at 7x7 mm. Architecturally, the PIC32MZ EF combines the M-Class MIPS Warrior core, a multi-channel DMA engine, and a peripheral bus matrix that decouples I/O from CPU throughput. This lets the CPU reach 330 DMIPS while high-bandwidth interfaces such as HS-USB and Ethernet operate in parallel without stalling firmware execution. Typical applications include industrial IoT gateways with Ethernet and USB, graphics HMI panels using the integrated GPU/diaper-point TFT controller, automotive infotainment prototypes, motor-control FOC drives, audio mixers with the I2S port, and connected medical instruments requiring Ethernet plus CAN connectivity. The wide peripheral mix supports both consumer and industrial-grade designs. When designing with this device, ensure the 100-ball BGA has properly designed escape routing on at least a 4-layer PCB; the 0.5 mm ball pitch requires HDI stack-up with microvias. Use Microchip's MPLAB Harmony v3 framework for peripheral drivers and FreeRTOS port, and verify the operating temperature range or use the E/GJX variant if -40C to +125C is required. This page synthesizes distributor pricing, drop-in 100-pin TFBGA replacements from Microchip's own EF/EFE/ECG family, side-by-side specifications, and practical PCB design notes beyond what the manufacturer datasheet alone provides.

USD $10,05 Auf Lager

PIC32MZ1024EFF100-I/PF

PIC32MZ1024EFF100-I/PF - 200MHz 32-Bit MCU, 1MB Flash, 100-TQFP | Microchip

The Microchip Technology PIC32MZ1024EFF100-I/PF is a high-performance 32-bit MIPS microcontroller from the PIC32MZ EF family, featuring a MIPS32 M-class core running up to 200 MHz with 1 MB of Flash and 256 KB of SRAM in a 100-pin TQFP package measuring 14x14 mm. A 32-bit microcontroller (MCU) is a programmable system-on-chip that integrates a high-performance processor core, on-chip memory, and a rich set of peripherals into a single device. Within the broader hierarchy of embedded computing, MCUs sit between simple microprocessors (which require external memory) and full application processors (which run rich operating systems). The PIC32MZ EF family in particular targets high-throughput industrial, automotive, IoT, graphics (HMI), and motor-control applications where deterministic real-time performance and substantial connectivity peripherals are required. Key features of the PIC32MZ1024EFF100-I/PF include a MIPS32 M-class core with hardware multiply/divide and DSP extensions, integrated FPU, 1 MB Flash program memory, 256 KB SRAM, and a dedicated 16 KB I-cache plus 4 KB D-cache. The device integrates Hi-Speed USB 2.0 (480 Mbps) with integrated PHY, two Ethernet MACs with RMII/MII interfaces, two CAN 2.0b controllers, six UART, four SPI, and five I2C peripherals. It also features a 12-bit 5 MSPS ADC with up to 48 analog inputs, multiple timer/counter modules, and a Peripheral Pin Select (PPS) mapping engine that allows flexible function assignment to physical pins. The architecture pairs a 5-stage pipeline MIPS core with tightly coupled SRAM and dedicated DMA, enabling deterministic interrupt response. The integrated SQI (Serial Quad Interface) controller supports high-throughput external Flash/PSRAM expansion, while the crypto accelerator (F variant) provides hardware AES, DES, and SHA engines. The part operates from 2.3V to 3.6V across the industrial -40C to +85C range. Typical applications include industrial automation controllers, IoT edge gateways, HMI/touch-screen graphics terminals, motor-control BLDC/PMSM drives, automotive body and chassis ECUs, USB peripherals and instrumentation, and high-speed Ethernet-connected embedded nodes. The combination of high core speed, dual Ethernet, USB-HS, and CAN makes it well suited to connected industrial nodes that must simultaneously run a TCP/IP stack and a CANopen or J1939 stack. When designing with the PIC32MZ1024EFF100-I/PF, allocate decoupling capacitance (typically 100 nF per VDD/VSS pin pair plus bulk 4.7 uF to 10 uF) directly beneath the package, and route the 12 MHz primary crystal traces symmetrically to minimize EMI. The Peripheral Pin Select remapping must be configured at startup before any digital peripheral will function; review the PPS lock sequence in the device family reference manual. This page synthesizes verified distributor pricing, drop-in same-package alternatives, and practical engineering notes not found in the manufacturer datasheet alone.

USD $6,95 Auf Lager

PIC32MZ1024EFF100-I/PT

PIC32MZ1024EFF100-I/PT - 200MHz 32-bit MCU, 1MB Flash|Microchip

TheMicrochip Technology PIC32MZ1024EFF100-I/PT is a high-performance 32-bit MIPS MCU from the PIC32MZ EF family, running up to 200 MHz and delivering up to 330 DMIPS, packaged in a100-pin TQFP (12x12 mm) with 1 MB Flash and 256 KB SRAM.It integrates an IEEE 754-compliant FPU, four 64-bit accumulators, single-cycle MAC, saturating and fractional math, plus DSP-enhanced instructions ona MIPS Warrior M-class core. The MCU integrates HS USB, Ethernet MAC, CAN, multiple I2C/SPI/UART peripherals, a 12-bit ADC up to 5 MSPS, and SQI for external serial Flash, targeting connectivity, graphics/HMI and motor control. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, I/O peripherals, and often analog/digital conversion.The PIC32 lineoccupies the 32-bit performance tier of Microchip's portfolio, positioned above PIC24/dsPIC and below the SAM S70/S71 Cortex-M7 seriesfor developers needing MIPS-class throughput with deterministic interrupt latency and amature MPLAB Harmony toolchain. Key features include 1 MB Live-Update Flash (Dual-Panel), 256 KB SRAM with 16 KB tightly-coupled cache, a 12-bit 5 MSPS ADC with up to 48 channels, a 12-bit 1 MSPS DAC, Hi-Speed USB 2.0 OTG, 10/100 Mbps Ethernet MAC with dedicated DMA, two CAN 2.0B controllers, and a graphics-friendly 32-bit PMP. The 100-pin TQFP exposes six SPI/I2S modules, six UART modules and four I2C buses for sensor aggregation. The PIC32MZ EF family uses a 5-stage pipelinedMIPS Warrior M-class core with a hardware multiply-divide unit and FPU.It supports live-update firmware via dual-panel Flash, enabling OTA-style image swaps without external memory.JTAG and 2-wire trace (PCLK/TDO) are available, andcrypto/authentication can be added via acompanion ECC608A or ATECC608B over I2C. Typical applications include industrial HMI panels with TFT-LCD + Resistive Touch, automotive CAN gateways (functional-safety variants availablein PIC32MZ EF 'EF' '-V' grade), IoT gateways with Ethernet + Wi-Fi co-existence, motor-control FOC drives up to 1 kW, and audio/graphics USB peripherals.Designers should pair it with an external 25 MHz crystal plus internal PLL to derive the 200 MHz core clock, and reserve dedicated layers for the analog/digital grounds per Microchip TB3071. The 100-pin TQFP suits hand-solderable prototyping and entry-levelproduction lines where BGAs are impractical. When migrating from PIC32MX, engineers gain roughly 4-5x DMIPS, double the SRAM, and full DSP/FPU support, but must adoptMPLAB Harmony v3 and re-validate interrupt prioritiesfor the new GENERIC_VECTOR scheme. This page synthesizesdistributor pricing, verifieddrop-in alternatives fromSiteMPN cross-reference,and engineering design notes not found inthemanufacturer datasheet.

USD $8,50 Auf Lager

PIC32MZ1024EFF100T-I/GJX

PIC32MZ1024EFF100T-I/GJX - 200MHz 1MB Flash MCU | Microchip

The Microchip Technology PIC32MZ1024EFF100T-I/GJX is a 32-bit MIPS32 M-Class microcontroller from the PIC32MZ EF family, delivering 200 MHz CPU clock, 1 MB Flash, and 256 KB SRAM in a 100-pin TFBGA (7x7 mm) package with industrial -40C to +85C operating range. The device integrates HS USB, Ethernet MAC, CAN, SQI flash interface, 32-bit FPU, DSP instructions, audio I2S/SSI and graphics peripherals in a single SoC, targeting high-performance embedded connectivity applications. A 32-bit microcontroller (MCU) is a programmable processor with on-chip memory and peripherals that executes instructions from a 32-bit datapath. Within the embedded hierarchy it sits above 8/16-bit MCUs in computational throughput while remaining lower cost and lower power than microprocessors (MPUs) that require external memory. The PIC32MZ EF family is positioned as a high-performance connectivity MCU family, sitting below the PIC32MZ EFH (with Crypto) and PIC32MX (legacy) families within Microchip's 32-bit MCU portfolio. Key features include a hardware Floating Point Unit (FPU) for single/double precision IEEE 754 math, 12-bit 18 MSPS ADC, four analog comparators, six UART, four SPI, four I2C, dedicated HS USB 2.0 On-The-Go PHY, 10/100 Ethernet MAC with RMII/MII interface, two CAN 2.0b controllers, SQI (Serial Quad Interface) for high-speed external flash/XIP, and Peripheral Pin Select (PPS) that allows flexible remapping of digital functions to any I/O pin. Architecturally, the PIC32MZ EF implements the MIPS M-Class core with 16 KB I-cache and 4 KB D-cache, a 9-stage pipeline, MMU, and tightly-coupled DSP ASE instructions. The 200 MHz core delivers 252 DMIPS / 3.28 CoreMarks per MHz performance, with deterministic interrupt response suitable for real-time control. SQI interface can address up to 128 MB external serial flash, enabling data-heavy applications such as graphics or audio streaming to offload non-volatile storage. Typical applications include industrial automation controllers, IoT gateways with Ethernet/HS USB connectivity, HMI graphics displays, motor control FOC drives, audio mixing consoles, and automotive body controllers. The combination of HS USB, ENET, and CAN in one chip makes it well suited for connected industrial nodes that bridge fieldbus to Ethernet. When designing with this MCU, allocate at least 4-layer PCB and consider thermal performance - at 200 MHz the device dissipates measurable power. Decouple every VDD/VSS pair with 100 nF ceramic plus bulk capacitors, and route HS USB D+/D- as 90-ohm differential with length matching. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $9,50 Auf Lager

PIC32MZ1024EFF100T-I/PF

PIC32MZ1024EFF100T-I/PF - 200MHz 32-bit MCU, 1MB Flash, 100-TQFP

The Microchip Technology PIC32MZ1024EFF100T-I/PF is a high-performance 32-bit MIPS32 M-Class PIC microcontroller running up to 200 MHz, integrating 1 MB of Flash program memory and 256 KB of SRAM in a 100-pin TQFP (14x14 mm) package. It belongs to the PIC32MZ EF family, which is engineered for connectivity-rich industrial, automotive, IoT, graphics (HMI), and motor-control applications. The device integrates Hi-Speed USB, Ethernet, CAN, SQI, and a 200 MHz core with floating-point unit. An MCU (microcontroller unit) is a single-chip computer containing a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals. The PIC32MZ EF family occupies the high-performance tier in Microchip's PIC32 portfolio, sitting above the PIC32MX and PIC32MM families and below the PIC32MK and dual-core PIC32CK parts. Within the power-management hierarchy, the MCU orchestrates power sequencing, sleep modes, and peripheral enable gating for the entire embedded system. Key features include the MIPS32 microAptiv core with DSP and FPU, 1 MB Live-Update Flash (allowing field updates without downtime), 256 KB SRAM, 8-channel DMA, multiple I2C/SPI/UART interfaces, 12-bit ADC, and hardware crypto accelerators. The 100-pin TQFP offers generous GPIO count for HMI panels and industrial gateways, while integrated Hi-Speed USB and Ethernet controllers enable connected-product designs without external bridges. The architecture supports real-time deterministic operation via dedicated peripheral trigger logic, DMA-driven data movement, and a 9-channel hardware motor-control PWM (MCPWM) peripheral. The Floating Point Unit accelerates sensor-fusion and control-loop math, while the DSP engine supports audio codec post-processing and FFT-based vibration analysis. Live-Update Flash lets a redundant firmware image overwrite the active image, which is critical for industrial equipment with 24/7 uptime requirements. Typical applications include industrial HMI panels, IoT gateways, USB/Ethernet-connected motor drives, automotive infotainment, and graphical touch-screen controllers. The part's high GPIO count and dual connectivity interfaces make it a strong fit for multi-protocol sensor hubs. Designers often pair it with Microchip's KSZ8081 PHY, MIC2026 USB power switch, and LAN8742 Ethernet transceiver for full connectivity stacks. When designing with this device, plan the power-rail decoupling for the high-speed 200 MHz core and ensure that the SQI interface traces are length-matched. The 100-TQFP package requires 14x14 mm of board area and is suitable for hand-rework and prototype builds but lacks the 252 MHz speed bin offered by the PIC32MZ1024EFF100T-250I/PF variant. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone - giving engineers an actionable starting point for PIC32MZ EF Bring-Up.

USD $8,95 Auf Lager

PIC32MZ1024EFF124-E/TL

PIC32MZ1024EFF124-E/TL - 180MHz 1MB Flash MCU | Microchip

The Microchip Technology PIC32MZ1024EFF124-E/TL is a high-performance 32-bit MIPS32 M-Class microcontroller running up to 180 MHz (up to 252 MHz on the EF family) with 1 MB of Flash program memory and 256 KB SRAM, housed in a 124-pin VTLA (9x9 mm) package with exposed pad. It integrates an IEEE 754-compliant hardware Floating Point Unit (FPU), Dual Panel Flash for live field updates, DSP-enhanced core with single-cycle MAC and four 64-bit accumulators, and a rich connectivity peripheral set including CAN, Ethernet, USB OTG, I2C, SPI, UART, SQI, EBI/EMI and PMP. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and programmable peripherals around a common bus. The PIC32MZ EF series extends the PIC32 architecture with a hardware FPU, faster flash access, and richer connectivity, positioning it between traditional 8/16-bit MCUs and higher-end Cortex-M4/M7 parts for applications that need deterministic real-time control combined with TCP/IP or USB stacks. Key features include 200 MHz / 330 DMIPS core performance, hardware FPU for single/double-precision IEEE 754 math, Dual Panel Flash allowing live firmware update without downtime, and an extensive peripheral set (CAN, Ethernet, USB OTG, SQI, PMP). The -E temperature grade supports the industrial -40C to +125C range; the -I grade is +40 to +85C. Security features include unique device ID and Flash OTP lock bits. Typical applications include industrial HMI and graphics, IoT edge gateways with Ethernet/USB connectivity, automotive body and infotainment sub-modules (AEC-Q100 grade parts), motor control FOC drives, and secure connected devices. The wide peripheral set also supports multi-protocol industrial bridges. When designing with this device, pay close attention to the decoupling network (a 0.1 uF + bulk cap on each VDD/VBAT pin), trace the exposed pad (EP) to a continuous ground plane for thermal dissipation, and validate the live-update Dual Panel Flash flow against application safety requirements. Program the configuration words early and lock them to prevent accidental brown-out or code-protect changes. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. Specifications below are anchored to Microchip's published PIC32MZ EF family data sheets and current distributor listings.

USD $8,10 Auf Lager

PIC32MZ1024EFF124T-I/TL

PIC32MZ1024EFF124T-I/TL - 200MHz 1MB Flash FPU MCU | Microchip

The Microchip Technology PIC32MZ1024EFF124T-I/TL is a high-performance 32-bit MIPS microcontroller from the PIC32MZ EF family, running up to 200 MHz with 330 DMIPS and an integrated IEEE 754 floating-point unit. It integrates 1 MB of dual-panel Flash and 256 KB of SRAM in a 124-pin VTLA (9x9 mm) package with exposed pad. The part is tape-and-reel packaged and operates across the industrial -40C to +85C temperature range. A 32-bit MCU is a microcontroller whose central processing unit has a 32-bit datapath, register file, and address bus, allowing it to process significantly more data per instruction and address more memory than 8-bit or 16-bit alternatives. Within that taxonomy, the PIC32MZ EF family sits in the high-performance connectivity tier - above the older PIC32MX and PIC32MZ EC families - combining DSP extensions, an FPU, Ethernet MAC, USB, CAN, and SQI for industrial HMI, IoT gateways, motor control, and graphics applications. Key features of the PIC32MZ1024EFF124T-I/TL include a MIPS Warrior M-class core with single-cycle MAC and saturating fractional math, four 64-bit accumulators, dual-panel Flash that supports live field updates without downtime, an integrated crypto engine, a 12-bit ADC at up to 18 Msps, and a wide peripheral set that covers Ethernet, USB-HS, CAN, SQI, and multiple UART/SPI/I2C instances. The dual-panel Flash enables firmware to swap between two banks so the application can boot into a known-good image even if a field update is interrupted. Typical applications include industrial automation controllers, IoT edge gateways with TLS acceleration, automotive infotainment HMI boards, motor-control FOC loops, and high-resolution graphics displays. Designers choose this part when they need deterministic real-time behavior combined with on-chip Ethernet and USB, all without an external memory bus. When laying out the board, give priority to a continuous ground pour under the exposed thermal pad of the VTLA package and keep the trace lengths to the 50 MHz Ethernet PHY short and impedance-controlled. Verify that your IDE toolchain is MPLAB X with XC32 compiler 2.50 or later so that the hardware FPU and DSP ASE are correctly enabled - older compiler builds silently disable the FPU and lose roughly 40% of the headline 330 DMIPS figure. This page synthesizes distributor pricing, drop-in tape-and-reel alternatives, and practical bring-up notes that are not assembled in the manufacturer datasheet alone.

USD $7,45 Auf Lager

PIC32MZ1024EFF144-E/JWX

PIC32MZ1024EFF144-E/JWX - 32-Bit MCU 1MB Flash 180MHz TFBGA-144 | Microchip

The Microchip Technology PIC32MZ1024EFF144-E/JWX is a 32-bit microcontroller built on the MIPS32 M-Class core, delivering 180 MHz operation with up to 200 MHz capability, packaged in a 144-lead Thin Fine-Pitch Ball Grid Array (TFBGA, 7x7 mm). The device integrates 1 MB of dual-panel Flash, 256 KB of SRAM, and a 32 KB instruction cache, positioning it as a high-performance MCU for connectivity, graphics, and motor-control applications. What is a PIC32MZ EF microcontroller? The PIC32MZ EF family is Microchip's flagship line of high-performance 32-bit microcontrollers based on the MIPS Warrior M-class architecture. These MCUs integrate a Floating Point Unit (FPU), Digital Signal Processing (DSP) extensions, and rich connectivity peripherals (HS USB, Ethernet, CAN, SQI) for embedded applications demanding real-time numeric performance combined with networking capability. Key features include a 32-bit MIPS32 M-class core with DSP extensions (four 64-bit accumulators, single-cycle MAC, saturating and fractional math), an IEEE 754-compliant FPU, dual-panel Flash for live firmware updates, and an integrated 12-bit ADC with up to 42 analog inputs. The MCU also offers HS USB 2.0 with integrated PHY, 10/100 Ethernet MAC, CAN 2.0b, multiple UART/SPI/I2C interfaces, and a Parallel Master Port for graphics displays. The PIC32MZ EF family targets industrial, automotive, IoT, graphics/HMI, and motor-control market segments. The 144-TFBGA package provides 144 I/O-capable pins for complex systems requiring extensive peripheral integration. The -E/JWX suffix indicates the -40C to +125C extended industrial temperature grade and the lead-free TFBGA-144 package. The "No Crypto" suffix signifies the absence of hardware cryptography acceleration, distinguishing it from the PIC32MZ EC family which includes crypto. Typical applications include industrial automation controllers, automotive body and HMI modules, IoT edge gateways with Ethernet connectivity, motor-control servo drives, and graphics display terminals. The 1 MB dual-panel Flash enables live firmware updates without downtime, while the FPU and DSP extensions accelerate sensor fusion and control-loop calculations. When designing with this part, allocate the 32 KB instruction cache to time-critical code paths and place the device's decoupling capacitors (100 nF + bulk) within 5 mm of each power pin. The TFBGA-144 package requires 4-layer or higher PCB stack-ups with microvia technology for reliable BGA soldering per IPC-7093 guidelines. This page synthesizes distributor pricing, same-brand drop-in alternatives, AEC-Q100 application guidance, and TFBGA-144 layout considerations that go beyond the manufacturer datasheet, helping engineers evaluate and integrate the PIC32MZ1024EFF144-E/JWX into next-generation connected embedded designs.

USD $12,18 Auf Lager

PIC32MZ1024EFF144-E/PL

PIC32MZ1024EFF144-E/PL - 200MHz 1MB Flash MCU 144-LQFP | Microchip

The Microchip Technology PIC32MZ1024EFF144-E/PL is a high-performance 32-bit microcontroller based on the MIPS Warrior M-Class core, delivering 200 MHz / 330 DMIPS performance with an integrated IEEE 754-compliant FPU and DSP-enhanced single-cycle MAC engine. The device integrates 1 MB of dual-panel Live-Update Flash and 256 KB of SRAM in a 144-pin LQFP package (20x20 mm). It is qualified for the extended -40C to +125C industrial temperature range. A 32-bit MCU is a microprocessor whose internal data path, registers, and ALU are 32 bits wide, enabling efficient handling of large integer and floating-point workloads. PIC32 microcontrollers belong to the MIPS architecture family and target embedded connectivity applications that demand deterministic real-time response combined with rich peripheral integration. The PIC32MZ EF family is positioned at the top of Microchip's PIC32 lineup, sitting between the lower-end PIC32MX devices and the higher-end SAME70 SAM Cortex-M7 family in performance, while retaining Microchip's MPLAB Harmony toolchain and peripheral library. Key features include HS USB 2.0 with integrated PHY, 10/100 Ethernet MAC with MII/RMII interface, two CAN 2.0B modules, multiple UART/SPI/I2C peripherals, a 12-bit 18 MSPS ADC, up to 16 channels of DMA, and an SQI (Serial Quad Interface) for high-speed external Flash. The 144-LQFP footprint exposes the maximum number of I/O and peripheral pins in this family variant. The dual-panel Live-Update Flash architecture allows firmware to be written to one panel while executing from the other, enabling fail-safe over-the-air (OTA) updates for connected industrial and IoT systems. Hardware crypto accelerators (when present in the EFF suffix variants) support AES, DES, SHA, and HMAC, while the EF (non-crypto) variants are pin-compatible and lower cost. Typical applications include industrial gateways with Ethernet and CAN, IoT edge nodes with secure cloud connectivity, automotive infotainment HMI controllers, motor control FOC drives, audio processing and graphics HMI panels, and point-of-sale terminals. The integrated FPU accelerates DSP workloads such as audio codecs, motor control loops, and FFT signal processing without offloading to a companion DSP. When designing with the PIC32MZ1024EFF144-E/PL, ensure the core supply uses a low-noise LDO and that VDDPLL/VBAT/VUSB decoupling follows the reference manual. Use MPLAB Harmony 3 configuration to avoid pin-mapping conflicts between the 144-LQFP, 100-TQFP, and 64-QFN variants of the same family. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet, enabling faster part selection and BOM risk reduction.

USD $9,30 Auf Lager

PIC32MZ1024EFF144-I/PH

PIC32MZ1024EFF144-I/PH - 200MHz 1MB Flash MCU 144-TQFP | Microchip

The Microchip Technology PIC32MZ1024EFF144-I/PH is a high-performance 32-bit MIPS MCU from the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, housed in a 144-pin TQFP (16x16 mm) package. The device integrates a 200 MHz MIPS Warrior M-class core delivering 330 DMIPS, 1 MB of Flash program memory (1M x 8), and 256 KB of SRAM, with hardware FPU and DSP-enhanced instructions including four 64-bit accumulators, single-cycle MAC, saturating and fractional math, plus IEEE 754 compliance. What is a PIC32MZ EF microcontroller? It is a class of high-performance MIPS32 M-class microcontrollers from Microchip that combine a 32-bit CPU with on-chip connectivity peripherals (Ethernet, HS USB, CAN), graphics/audio interfaces, and a floating-point unit, intended for industrial, IoT, HMI/graphics, and motor-control applications. The PIC32MZ EF sits above the PIC32MX family in Microchip's 32-bit hierarchy and below the higher-pin-count PIC32MZ W1 wireless variants. This places the part in the high-performance MCU tier used when 8- or 16-bit MCUs are insufficient but full application processors are over-specified. Key features include dual-panel Flash for live firmware update, HS USB 2.0 host/device/OTG, 10/100 Ethernet MAC, dual CAN 2.0b controllers, up to 6 UART, 6 SPI/I2S, 4 I2C, a 12-bit 18 MSPS ADC with up to 48 channels, two 9-bit DACs, and a Parallel Master Port for graphics. The integrated crypto engine supports AES, 3DES, SHA, MD5, HMAC, and RNG. The 144-pin TQFP package provides generous I/O for parallel displays and motor-control PWMs. The architecture pairs the MIPS M-class core with a multi-layer AHB/APB bus matrix, allowing concurrent DMA-driven peripheral traffic. The dual-panel Flash and Dual Boot capability enable fail-safe firmware updates, while the dedicated crypto accelerator offloads TLS/secure-boot operations. Internal regulator and brown-out reset support a wide 2.3-3.6 V operating range. Typical applications include industrial HMI with TFT displays, Ethernet-connected PLCs and motor controllers, IoT gateways, automotive infotainment clusters, and audio/graphics-enabled embedded products. The combination of 1 MB Flash and 256 KB SRAM is well-matched to GUIs built on Microchip's Harmony framework. Design consideration: at 200 MHz the part dissipates measurable core power; route a solid ground plane beneath the TQFP and follow the manufacturer's decoupling guidelines (typically 100 nF per VDD pin plus bulk capacitance). Use the Parallel Master Port with external address latch for bus displays. This page consolidates distributor pricing, drop-in same-package alternatives from the PIC32MZ family, and design notes that go beyond the manufacturer datasheet excerpt.

USD $9,84 Auf Lager

PIC32MZ1024EFF144-I/PL

PIC32MZ1024EFF144-I/PL - 200MHz 1MB Flash MCU | Microchip

The Microchip PIC32MZ1024EFF144-I/PL is a 32-bit MIPS32 M-Class microcontroller running up to 200 MHz with 1 MB Flash and 256 KB SRAM, housed in a 144-pin LQFP (20x20 mm) package. It belongs to the PIC32MZ EF family targeting connectivity applications including industrial, automotive, IoT, graphics/HMI, and motor control market segments. A 32-bit microcontroller (MCU) is an integrated processor that executes instructions over a 32-bit data path, typically featuring on-chip Flash, SRAM, and a rich set of peripherals. The PIC32MZ EF family sits in the high-performance tier of Microchip's 32-bit MCU portfolio (PIC32 -> 32-bit MCU -> microcontroller -> embedded IC -> semiconductor), integrating a MIPS Warrior M-class DSP-enhanced core with a single-cycle hardware Floating Point Unit (FPU) and four 64-bit accumulators for saturating and fractional math. Key differentiating features include dual-panel Flash for live-update firmware support (enabling field upgrades without downtime), 200 MHz / 330 DMIPS core performance, integrated HS USB, Ethernet MAC, CAN, SQI (Serial Quad Interface), and an 18-channel ADC. The integrated crypto engine (note the second 'F' in 'EFF' suffix) supports AES, DES, 3DES, SHA, MD5, and RNG primitives, differentiating this variant from non-crypto 'EFE' parts. The 144-pin LQFP exposes 5 UART, 6 SPI, 5 I2C, and dedicated high-speed communication peripherals. Architecturally, the device combines a Harvard-class memory bus with a tightly-coupled FPU to deliver single-cycle MAC operations - useful for audio codecs and motor control loops. The dual-panel Flash partitions memory so the application can run from one panel while the other is being reprogrammed, a critical capability for industrial and automotive systems requiring non-stop operation. Internal pull-ups, configurable open-drain I/O, and 5V-tolerant inputs simplify mixed-voltage interfacing. Typical applications include industrial Ethernet-connected PLCs, automotive infotainment and body controllers, IoT edge gateways with TLS acceleration, graphics HMI panels with TFT/LCD controllers, and motor-control inverters (BLDC, PMSM, FOC). The combination of high-performance core, ample memory, and integrated connectivity peripherals reduces system BOM by replacing external Ethernet and crypto co-processors. When designing with this device, place 0.1uF ceramic decoupling capacitors adjacent to every VDD/VSS pair and follow the recommended 4-layer PCB stack-up with a dedicated ground plane. Engineers migrating from PIC32MX parts must re-evaluate pinout remapping, peripheral library changes, and use MPLAB Harmony v3 for firmware development. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on individual distributor product pages.

USD $7,32 Auf Lager

PIC32MZ1024EFF144T-E/JWX

PIC32MZ1024EFF144T-E/JWX - 32-bit MIPS MCU 180MHz 1MB Flash 144-TFBGA

The Microchip Technology PIC32MZ1024EFF144T-E/JWX is a high-performance 32-bit MIPS microcontroller from the PIC32MZ EF family, operating at up to 180 MHz with 1 MB Flash and 256 KB SRAM in a 144-ball TFBGA (7x7 mm) package. Designed for industrial, IoT, automotive, graphics/HMI, and motor control applications, the device integrates an FPU, DSP enhancements, and a rich peripheral set including HS USB, Ethernet, CAN, and multiple analog blocks. A 32-bit MIPS microcontroller (MCU) is a programmable embedded processor based on the MIPS instruction set architecture that executes 32-bit operations per clock cycle, enabling deterministic real-time control with significantly higher throughput than 8/16-bit MCUs. The PIC32MZ EF family sits in the high-performance tier of Microchip's MCU portfolio, positioned between the PIC32MX mainstream family and the PIC32MZ EF/WFI graphics-tier devices. Within the broader taxonomy: 32-bit MCU -> microcontroller -> embedded processor -> semiconductor -> integrated circuit. Key features include up to 180 MHz core speed (200 MHz on the industrial-grade -I variant), 1 MB Flash program memory, 256 KB SRAM, 8 DMA channels, 120 general-purpose I/O lines, and an integrated Floating Point Unit and DSP. The -E temperature grade extends operation from -40C to +125C, suitable for automotive and harsh industrial environments. Security features include Flash OTP and a unique 128-bit device ID for anti-counterfeit provisioning. The 144-ball TFBGA package provides high pin density (0.5 mm pitch) for space-constrained designs while maintaining robust thermal and electrical performance. The architecture combines the MIPS M-Class core with tightly-coupled peripherals mapped to a multi-channel DMA engine, enabling deterministic interrupt response and offloading data movement from the CPU. On-chip peripherals include HS USB 2.0 (host/device/OTG), 10/100 Ethernet MAC with MII/RMII interfaces, two CAN 2.0b controllers, multiple UART/SPI/I2C, and an SQI interface for Quad-SPI Flash expansion. The advanced analog block delivers up to 48 MSPS 12-bit ADC, 2 analog comparators, and multiple DAC outputs. Typical applications include industrial automation controllers, automotive infotainment and cluster-I/O, IoT gateways, graphical HMI touch panels, BLDC and PMSM motor control, and connected medical devices. The wide temperature range and CAN interfaces make it particularly well-suited for in-vehicle networks and factory-floor PLC modules. Engineers pair it with companion parts such as external Ethernet PHYs, CAN transceivers, and TFT LCD drivers. Design considerations include proper decoupling of the four separate supply rails (VDD, AVDD, VBAT, and VDDIO), trace-length matching on the Ethernet MII/RMII bus, and careful PCB layout to manage BGA fanout on a 4-layer or higher stackup. The JTAG/SWD interface supports boundary-scan and in-field firmware updates via bootloader or OTA mechanisms. This page synthesizes real-time distributor pricing, drop-in alternative cross-references, and practical design notes not consolidated on the manufacturer product page, giving procurement and design engineers a single, decision-ready reference for the PIC32MZ1024EFF144T-E/JWX.

USD $9,12 Auf Lager

PIC32MZ1024EFF144T-I/PH

PIC32MZ1024EFF144T-I/PH - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip PIC32MZ1024EFF144T-I/PH is a high-performance MIPS32 M-Class 32-bit microcontroller running up to 200 MHz with 1 MB of Flash program memory and 256 KB of SRAM, housed in a 144-pin TQFP (16x16 mm, 0.4 mm pitch) package. The 'T' suffix denotes tape-and-reel packaging and the 'I' grade indicates an industrial operating temperature range of -40C to +85C, while the 'PH' package code identifies the 144-pin TQFP land pattern. The PIC32MZ EF family integrates a floating-point unit, a high-speed USB 2.0 HS transceiver, dual Ethernet MACs, CAN 2.0b, SQI (Serial Quad Interface) flash expansion, and a 12-bit ADC with up to 120 analog input channels (via external muxes). Key features of the device include the MIPS32 microAptiv core with single-precision hardware FPU, 1 MB self-programmable Flash with live update support, 256 KB RAM plus 160 KB of additional boot/FMF/auxiliary memory, 200 MHz/252 MHz core performance targets (200 MHz part shown), and integrated HS USB, Ethernet, CAN, SQI, EBI, and six UART/I2C/SPI peripherals for industrial connectivity. A high-performance MCU is the central controller of an embedded system: it executes firmware, drives I/O peripherals, manages communication buses, and handles real-time processing. Within the broader taxonomy, the PIC32MZ EF belongs to the 32-bit microcontroller family, then the MIPS-based MCU class, then the high-performance connectivity MCU sub-segment targeting industrial, automotive, IoT, graphics (HMI), and motor-control applications. The EF family is engineered for designs that require simultaneous Ethernet, USB, CAN, and graphics workloads on a single die. The architecture pairs a 5-stage pipelined microAptiv MPU with a dedicated DSP engine, hardware multiply-accumulate, and an instruction cache with configurable write-back policy. Up to 144 GPIO pins and dedicated peripheral pin-select (PPS) remapping allow flexible PCB routing even in densely populated designs. Crypto accelerators (random number generator) and an integrated 12-bit 18 MSPS ADC simplify the BOM for secure motor-control and connected-sensor designs. Typical applications include industrial gateways and PLCs, automotive infotainment/cluster controllers, IoT edge nodes with Ethernet+CAN, HMI panels with integrated TFT driving, motor-control drives for FOC and PFC, and USB host/device peripherals in consumer electronics. The 252 MHz maximum and 1 MB Flash target connectivity stacks such as TCP/IP, USB, and lightweight RTOS or bare-metal frameworks. When designing with the PIC32MZ1024EFF144T-I/PH, designers should match the 0.4 mm pitch TQFP footprint with sufficient PCB thermal dissipation (typically a 4-layer board with thermal vias under the EP). Decoupling must include a 100 nF plus 4.7 uF combination on each VDD/VBAT/VBUS pin, and the SQI trace layout should be length-matched within 2 mm. The PPS feature requires careful peripheral mapping at compile time to avoid pin conflicts. This page synthesizes distributor pricing, drop-in alternatives, and design considerations not aggregated on a single manufacturer datasheet page, providing a faster procurement and design reference for engineering teams evaluating the PIC32MZ EF family.

USD $8,75 Auf Lager

PIC32MZ1024EFF144T-I/PL

PIC32MZ1024EFF144T-I/PL - 200MHz 32-bit MCU, 1MB Flash | Microchip

The Microchip PIC32MZ1024EFF144T-I/PL is a high-performance 32-bit MIPS32 M-Class microcontroller running up to 200MHz, integrating 1MB of Flash program memory and 256KB of SRAM in a 144-pin LQFP (20x20 mm) package. This PIC32MZ EF family device is built on a 32-bit RISC architecture with an integrated Floating Point Unit (FPU), delivering the computational throughput required for connectivity, graphics, and motor control applications. The part operates from a 2.5V/3.3V supply and is rated for the industrial -40C to +85C temperature range.

USD $8,88 Auf Lager

PIC32MZ1024EFG064-E/MR

PIC32MZ1024EFG064-E/MR - 180MHz 32-bit MCU 1MB Flash 64-QFN | Microchip

The Microchip Technology PIC32MZ1024EFG064-E/MR is a 32-bit MIPS32 M-Class microcontroller running up to 180 MHz with an integrated IEEE 754-compliant Floating Point Unit (FPU). It integrates 1 MB of Flash program memory and 512 KB of SRAM in a 64-pin QFN (9x9 mm) package, targeting high-performance connected embedded designs. A microcontroller, often abbreviated MCU, is a single-chip computer that combines a CPU core, program memory, working RAM, and a rich set of peripherals. The PIC32MZ EF family belongs to the broader MIPS32 architecture tree (MIPS Warrior M-class), itself a 32-bit RISC lineage descended from the original MIPS instruction set. Within Microchip's portfolio, the PIC32MZ EF sits between the lower-pin PIC32MX family and the higher-end PIC32MZ DA/W1 families, balancing connectivity (HS USB, Ethernet, CAN) with floating-point DSP performance for industrial, IoT, graphics HMI, and motor control markets. Key features include a 200 MHz / 330 DMIPS MIPS Warrior M-class core with DSP enhancements (four 64-bit accumulators, single-cycle MAC, saturating and fractional math), 1 MB Live-Update Flash, 512 KB SRAM, an FPU, plus on-chip peripherals such as HS USB, Ethernet MAC, multiple CAN, SQI, and a 12-bit ADC. The integrated FPU enables floating-point math without software emulation, accelerating complex control loops. Live-Update Flash allows firmware upgrades without service interruption, valuable for industrial and IoT deployments. The E/MR temperature grade extends the operating range to -40C to +125C, supporting harsh-environment designs. Designers should note the 180 MHz figure reflects the power-saved operating point, with the EF family data sheet indicating headroom up to 200 MHz depending on configuration. When laying out a board, allocate dedicated decoupling for the analog AVDD/AVSS rails, and follow Microchip's PIC32MZ EF hardware checklist for high-speed signal integrity. This page combines distributor pricing and stock data with practical design guidance not duplicated in the bare datasheet, helping engineers evaluate the part against same-package PIC32MZ EF alternatives for graphics, audio, and motor-control designs.

USD $9,42 Auf Lager

PIC32MZ1024EFG064-I/MR

PIC32MZ1024EFG064-I/MR - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFG064-I/MR is a high-performance 32-bit microcontroller built on the MIPS Warrior M-class core, running up to 200 MHz with 1 MB of Flash and 512 KB of SRAM, housed in a 64-pin QFN (MR) package measuring 9x9 mm. This device belongs to the PIC32MZ EF (Embedded Connectivity with Floating Point Unit) family and supports MIPS microAptiv/M-Class DSP extensions including four 64-bit accumulators, single-cycle MAC, and saturating and fractional math. What is a PIC32MZ EF microcontroller? The PIC32MZ EF family is a high-performance 32-bit Flash microcontroller family based on the MIPS32 microAptiv/M-Class core. It integrates a single-precision IEEE 754 Floating Point Unit (FPU), high-speed connectivity peripherals (HS USB, Ethernet, CAN), and advanced analog (12-bit ADC, comparators). Within the Microchip PIC32 portfolio hierarchy: PIC32MX (entry 32-bit) -> PIC32MM (low-power) -> PIC32MK (motor control / analog) -> PIC32MZ EC (connectivity, no FPU) -> PIC32MZ EF (connectivity + FPU). The PIC32MZ EF line targets industrial, IoT, graphics HMI, and motor-control segments. Key features of this specific -I/MR variant include the 64-pin QFN (MR) industrial-temperature package (-40C to +85C), 1 MB of program Flash, 512 KB of SRAM, integrated HS USB 2.0 PHY, 10/100 Ethernet MAC, dual I2S/SPI interfaces for audio, an integrated graphics controller driving TFT panels up to WVGA, 24 channels of 12-bit ADC at 1 Msps, six UART, four SPI, and four I2C peripherals. The MIPS M-class core with FPU delivers approximately 330 DMIPS and 1.56 DMIPS/MHz. Architecturally, the PIC32MZ EF combines separate instruction and data Flash banks enabling Live Update firmware field upgrades, a multi-port DMA engine with 8 independent channels for offloading data movement from the core, and a Peripheral Pin Select (PPS) system that remaps most digital peripherals to any GPIO. The 12-bit ADC includes dual Sample-and-Hold for simultaneous sampling, while the 6-bit comparator with 32-level voltage reference enables hardware motor-control loops without CPU intervention. Typical applications include industrial IoT gateways (Ethernet + TLS acceleration paths), TFT-based HMI panels with graphics and audio, motor-control BLDC/PMSM drives using FOC algorithms (motor-control firmware libraries included), automotive infotainment and telematics subsystems, and connected medical devices requiring FPU for DSP/filtering. The wide peripheral set allows a single chip to replace discrete MCU + Ethernet controller + USB-IF combinations. When designing with the PIC32MZ1024EFG064-I/MR, plan the PCB layout around the 9x9 mm QFN exposed pad for thermal dissipation and ground return. Use MPLAB Harmony 3 for driver/provisioning stacks; configure the PLL from the 24 MHz primary oscillator for stable operation at 200 MHz. Decoupling requires 100 nF plus 4.7 uF bulk per VDD pin per Microchip reference schematics, and the analog supply AVDD must be star-routed and decoupled separately from the digital VDD. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a single source for component evaluation and procurement decisions.

USD $7,99 Auf Lager

PIC32MZ1024EFG064-I/PT

PIC32MZ1024EFG064-I/PT - 200MHz 1MB Flash MCU | Microchip

The Microchip Technology PIC32MZ1024EFG064-I/PT is a 32-bit MIPS M-Class microcontroller running up to 200 MHz (330 DMIPS, 3.28 CoreMark/MHz) with 1 MB of dual-panel Live-Update Flash and 512 KB of SRAM, housed in a 64-pin TQFP (10x10 mm) package. This PIC32MZ EF family device integrates an IEEE 754 hardware Floating Point Unit (FPU), a DSP-enhanced core with four 64-bit accumulators and single-cycle MAC, plus high-speed connectivity including HS USB, Ethernet MAC, and CAN for embedded-connectivity designs. What is a 32-bit microcontroller with FPU? An MCU with an integrated Floating Point Unit executes single- and double-precision IEEE 754 math in hardware rather than software emulation, dramatically accelerating control loops and DSP workloads. PIC32MZ EF devices sit in the hierarchy MCU -> 32-bit MCU -> MIPS M-Class MCU -> PIC32 family -> PIC32MZ EF sub-family -> Power-Management-IC adjacency (companion PMIC parts). This category is the workhorse of industrial connectivity, HMI graphics, motor control, and IoT edge nodes. Key features include a 12-bit ADC with up to 24 analog channels, eight DMA channels for offloading the CPU, dedicated audio/graphics peripherals (I2S, PMP, EBI), and a Cryptographic Engine absence flag in this 'G' variant (no on-chip crypto). The integrated FPU plus 330 DMIPS throughput make floating-point PID, FFT, and audio processing viable without an external DSP coprocessor. Architecturally, the PIC32MZ1024EFG064 pairs the MIPS Warrior M-class core with dual-panel Flash that supports live update (one panel runs while the other is reprogrammed), enabling fail-safe firmware upgrades in the field. The 512 KB SRAM is large enough to hold full TCP/IP stacks plus TLS buffers, supporting connectivity stacks that would otherwise require external memory. Typical applications include industrial HMI panels with TFT LCD, motor-control FOC drives, IoT gateways with Ethernet, audio DSP front-ends, and secure-connected appliances. The wide peripheral mix also suits automotive body controllers and factory-automation slaves. When designing with this part, reserve sufficient PCB area for the 64-pin TQFP's 0.5 mm pitch and ensure the ICSP pair (PGECx/PGEDx) is accessible for in-circuit programming. Adequate decoupling (100 nF + bulk) near each VDD/VSS pair is mandatory at 200 MHz to keep EMI low. This page synthesizes distributor pricing, same-package alternatives, and practical design notes that complement the manufacturer datasheet rather than replace it.

USD $5,94 Auf Lager

PIC32MZ1024EFG064T-I/MR

PIC32MZ1024EFG064T-I/MR - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFG064T-I/MR is a high-performance 32-bit MIPS Warrior M-class microcontroller running up to 200 MHz (252 MHz on the M-class core family), integrating 1 MB of Flash program memory and 512 KB of SRAM in a 64-pin 9x9 mm QFN package with an integrated Floating Point Unit. Designed around the MIPS32 M-Class core with DSP enhancements (four 64-bit accumulators, single-cycle MAC, IEEE 754 FPU), this MCU delivers up to 330 DMIPS throughput while integrating High-Speed USB, Ethernet MAC, SQI (Serial Quad Interface), and a rich set of analog and timer peripherals. A microcontroller (MCU) is an integrated processor, memory, and peripheral set on a single die used to embed real-time control and connectivity into electronic systems. Within the broader taxonomy, the PIC32MZ EF family sits as a high-tier 32-bit MCU family within Microchip's PIC32 portfolio, which itself belongs to the embedded controller / microprocessor segment of the semiconductor market, targeting industrial, automotive, IoT, HMI/graphics, and motor-control applications. EF denotes the Floating Point variant with Ethernet and FPU support. Key features of the PIC32MZ1024EFG064T-I/MR include 1 MB Flash (1M x 8), 512 KB SRAM, an integrated crypto engine family option (this No-Crypto variant), High-Speed USB 2.0 with PHY, 10/100 Ethernet MAC, SQI interface for external Flash, 46 programmable I/O lines, 8 DMA channels, 9 timers, 2 comparators, 2 watchdog timers, and an RTC. The 64-QFN (9x9) package provides low inductance power/ground and exposes a thermal pad for improved thermal performance. The 200 MHz core with single-cycle MAC and DSP-enhanced accumulators makes the device suitable for real-time signal processing, while the integrated FPU simplifies floating-point math for sensor fusion, motor control loops, and graphics rendering. Combined with Hi-Speed USB and Ethernet, the device can act as a host, device, or networked node without external bridges. Typical applications include industrial connectivity gateways, IoT edge nodes, HMI/graphics controllers, motor-control and BLDC drives, audio processing front-ends, and automotive infotainment subsystems where high throughput and integrated connectivity reduce BOM and PCB area. When designing with this MCU, pay attention to the 200 MHz power budget and provide a low-impedance 3.3 V supply with bulk and decoupling capacitance close to each VDD/VSS pair; the integrated PHY domains have separate supply pins that must be bypassed carefully. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design considerations sourced from Microchip's PIC32MZ EF datasheet and authorized distributors - data points not aggregated on a single distributor page.

USD $7,95 Auf Lager

PIC32MZ1024EFG064T-I/PT

PIC32MZ1024EFG064T-I/PT - 32-bit 200MHz MCU, 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFG064T-I/PT is a 32-bit MIPS Warrior M-class microcontroller running up to 200 MHz (252 MHz for the family) with 1 MB Flash and 512 KB SRAM, packaged in a 64-pin TQFP (10x10 mm). It targets connectivity-rich applications including industrial, automotive, IoT, HMI graphics, and motor control. A 32-bit MCU is a microcontroller that integrates a CPU core, program memory, data memory, and peripherals on a single silicon die. The PIC32MZ EF family sits within the broader hierarchy of microcontrollers -> 32-bit MCUs -> MIPS-based MCUs -> embedded connectivity MCUs, combining high computational throughput with hardware accelerators for DSP, FPU, and cryptography (in crypto variants). Key features include 200 MHz / 330 DMIPS core performance, IEEE 754-compliant single-precision FPU, four 64-bit accumulators for DSP with single-cycle MAC, and saturating/fractional math support. The device integrates HS USB, Ethernet MAC, CAN, SQI, and advanced analog peripherals. The 64-pin TQFP provides 53 general-purpose I/O pins for flexible system integration. Architecturally, the PIC32MZ EF uses a Harvard cache architecture with prefetch module and 16 KB instruction cache to sustain throughput at 200 MHz. The Live-Update Flash dual-bank feature enables field firmware upgrades without downtime, while the dedicated crypto engine (in crypto variants) accelerates AES, 3DES, SHA, and RNG operations. Typical applications include industrial IoT gateways with Ethernet connectivity, automotive body/HMI controllers, graphic HMI displays, motor control drives, and audio processing systems. The wide peripheral integration allows single-chip implementation of connected embedded products. When designing with this MCU, ensure proper decoupling (100 nF + bulk capacitor per VDD pin pair) and follow the 64-pin TQFP layout guidelines. The Live-Update Flash requires a firmware framework that handles dual-bank synchronization during OTA updates. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $7,74 Auf Lager

PIC32MZ1024EFG100-250I/PT

PIC32MZ1024EFG100-250I/PT - 250MHz 32-bit MCU, 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFG100-250I/PT is a high-performance 32-bit MIPS MCU running up to 250 MHz with 1 MB Flash and 512 KB SRAM, housed in a 100-pin TQFP (PT) package measuring 12x12 mm. This Industrial-temperature-grade variant is part of the PIC32MZ EF family targeting connectivity, graphics/HMI, motor control, and IoT applications with on-chip Floating Point Unit support and rich connectivity peripherals. What is a 32-bit microcontroller? A 32-bit MCU is an embedded processor with a 32-bit data path, integer ALU, and program word width, sitting in the hierarchy: 32-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. 32-bit MCUs deliver higher throughput than 8/16-bit devices and typically integrate memory, analog, and communication peripherals in a single chip for embedded designs. Key features of the PIC32MZ1024EFG100-250I/PT include: a MIPS32 M-Class core with FPU delivering up to 252 MHz (250 MHz in this part), 1 MB (1M x 8) Flash program memory, 512 KB SRAM, and a dedicated 12-bit 18 MSPS ADC. The device includes Hi-Speed USB 2.0 OTG, dual CAN 2.0b controllers, multiple UART/SPI/I2C peripherals, an integrated crypto engine absent on this "G" (no-crypto) variant, and an enhanced PMP/graphics interface for HMI panels. Architecturally, the PIC32MZ EF family uses the MIPS M4K microAptiv core with 16 KB I-cache and 16 KB D-cache, a 7-stage pipeline, DSP extensions, and a single-precision FPU. The 250 MHz clock provides 3.28 CoreMark/MHz performance, ample for high-speed protocol stacks (TCP/IP, USB, CAN-FD) and real-time DSP processing. A 8-channel DMA controller offloads data movement between peripherals and memory, reducing CPU interrupt load. Typical applications include industrial control and IoT edge nodes, high-resolution graphics/HMI panels, motor control (BLDC, PMSM, servo), automotive infotainment subsystems, and USB-based embedded devices. The 100-pin TQFP package provides generous I/O for parallel buses, PMP graphics, and multi-channel motor drive feedback. When designing with this part, ensure decoupling per the family datasheet (typically 100 nF + 4.7 uF near each VDD pair), use the integrated FPU for DSP workloads, and leverage MPLAB Harmony 3 code generation for peripheral setup. Compared to lower-end PIC32MX parts at 80 MHz, the PIC32MZ EF delivers roughly 3x DMIPS for protocol-heavy designs. This page synthesizes distributor pricing, same-family drop-in alternatives (PIC32MZ1024EFE100T-I/PT, PIC32MZ1024ECG100-I/PT, PIC32MZ1024ECH100-I/PT), and practical design notes not found in the manufacturer datasheet.

USD $9,50 Auf Lager

PIC32MZ1024EFG100-E/GJX

PIC32MZ1024EFG100-E/GJX - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFG100-E/GJX is a 32-bit MIPS Warrior M-class microcontroller featuring a 200 MHz core with 330 DMIPS performance, 1 MB of Flash program memory, and 512 KB of SRAM, packaged in a 100-pin TFBGA (7x7 mm) form factor. It belongs to the PIC32MZ EF family, which combines high computational throughput, an integrated Floating Point Unit (FPU), and DSP extensions to address graphics/HMI, motor control, connectivity, and general-purpose embedded applications. A 32-bit microcontroller (MCU) is an integrated circuit containing a CPU, memory, and programmable peripherals on a single die, designed for embedded control tasks that exceed the capability of 8-bit or 16-bit microcontrollers. Within the broader taxonomy, a 32-bit MCU falls under microcontroller -> embedded processor -> integrated circuit. The PIC32MZ EF family leverages a MIPS Warrior M-class core (a RISC architecture) with hardware multiply-accumulate, four 64-bit accumulators, and a single-precision FPU, enabling double-precision math and IEEE 754 compliance for scientific and signal-processing workloads. Key differentiating specifications include a 12-bit, 18 MSPS, 40-channel ADC module with up to 6 dedicated comparators, a Memory Management Unit (MMU) supporting embedded operating systems such as FreeRTOS and Micrium OS, and Dual Panel Flash for live firmware updates without downtime. Communication peripherals include multiple UART, SPI, I2C, I2S, USB, and CAN interfaces, plus a 10/100 Ethernet MAC for networked industrial applications. The device integrates a hardware crypto accelerator variant family, although the -EFG100 suffix denotes the standard (non-crypto) configuration. The wide operating voltage range of 2.2 V to 3.6 V, automotive-grade temperature range (-40 °C to +125 °C indicated by the -E suffix), and AEC-Q100 qualification make it suitable for both industrial and automotive environments. Pin-compatible variants within the PIC32MZ EF family allow designers to scale from 64-pin to 144-pin packages with minimal code changes. Typical applications include industrial automation controllers, automotive body and gateway ECUs, graphical HMI terminals with TFT LCD support, IoT edge nodes with Ethernet connectivity, and motor control drives for BLDC and stepper systems. The MMU and DSP extensions also position this MCU well for audio processing and predictive maintenance nodes. When designing with this device, prioritize a 4-layer PCB with a continuous ground plane to manage 200 MHz edge rates, place decoupling capacitors within 3 mm of each VDD/VSS pair, and use MPLAB Harmony v3 for peripheral configuration to avoid register-level conflicts. Verify trace lengths for SDRAM and Ethernet signals against the IBIS models provided in the device family reference manual. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, providing engineers with a single reference for sourcing and integration decisions.

USD $9,98 Auf Lager

Unterkategorien

Produkte (32725)

PIC32MZ1024EFF100-E/GJX - 200MHz 32-bit MCU, 1MB Flash, 100-TFBGA | Microchip

PIC32MZ1024EFF100-E/PF - 180MHz 1MB Flash MCU | Microchip

PIC32MZ1024EFF100-E/PT - 32-bit 180MHz MCU, 1MB Flash TQFP-100

PIC32MZ1024EFF100-I/GJX - 200MHz 32-bit MCU 1MB Flash | Microchip

PIC32MZ1024EFF100-I/PF - 200MHz 32-Bit MCU, 1MB Flash, 100-TQFP | Microchip

PIC32MZ1024EFF100-I/PT - 200MHz 32-bit MCU, 1MB Flash|Microchip

PIC32MZ1024EFF100T-I/GJX - 200MHz 1MB Flash MCU | Microchip

PIC32MZ1024EFF100T-I/PF - 200MHz 32-bit MCU, 1MB Flash, 100-TQFP

PIC32MZ1024EFF124-E/TL - 180MHz 1MB Flash MCU | Microchip

PIC32MZ1024EFF124T-I/TL - 200MHz 1MB Flash FPU MCU | Microchip

PIC32MZ1024EFF144-E/JWX - 32-Bit MCU 1MB Flash 180MHz TFBGA-144 | Microchip

PIC32MZ1024EFF144-E/PL - 200MHz 1MB Flash MCU 144-LQFP | Microchip

PIC32MZ1024EFF144-I/PH - 200MHz 1MB Flash MCU 144-TQFP | Microchip

PIC32MZ1024EFF144-I/PL - 200MHz 1MB Flash MCU | Microchip

PIC32MZ1024EFF144T-E/JWX - 32-bit MIPS MCU 180MHz 1MB Flash 144-TFBGA

PIC32MZ1024EFF144T-I/PH - 200MHz 32-bit MCU 1MB Flash | Microchip

PIC32MZ1024EFF144T-I/PL - 200MHz 32-bit MCU, 1MB Flash | Microchip

PIC32MZ1024EFG064-E/MR - 180MHz 32-bit MCU 1MB Flash 64-QFN | Microchip

PIC32MZ1024EFG064-I/MR - 200MHz 32-bit MCU 1MB Flash | Microchip

PIC32MZ1024EFG064-I/PT - 200MHz 1MB Flash MCU | Microchip

PIC32MZ1024EFG064T-I/MR - 200MHz 32-bit MCU 1MB Flash | Microchip

PIC32MZ1024EFG064T-I/PT - 32-bit 200MHz MCU, 1MB Flash | Microchip

PIC32MZ1024EFG100-250I/PT - 250MHz 32-bit MCU, 1MB Flash | Microchip

PIC32MZ1024EFG100-E/GJX - 200MHz 32-bit MCU 1MB Flash | Microchip