Integrierte Schaltungen

Unterkategorien

📁 ADC/DAC 2518 Produkte 📁 Verstärker-ICs 793 Produkte 📁 Audio-Codecs 16 Produkte 📁 Audio-ICs 2 Produkte 📁 Takt & Timing 287 Produkte 📁 DSP 962 Produkte 📁 Datenakquise-ICs 2 Produkte 📁 Digitale Potentiometer 4 Produkte 📁 Display-Treiber & -Controller 1 Produkte 📁 FPGA & CPLD 6666 Produkte 📁 Schnittstellen-ICs 1568 Produkte 📁 LED-Treiber 1 Produkte 📁 Logik-ICs 305 Produkte 📁 Speicher-ICs 875 Produkte 📁 Mikrocontroller 18688 Produkte 📁 Mikroprozessoren 4 Produkte 📁 Motortreiber 1 Produkte 📁 Sonstiges 1 Produkte 📁 Sensor and Detector Interfaces 1 Produkte 📁 Spezialisierte ICs 15 Produkte 📁 Video-ICs 13 Produkte

Produkte (32725)

S9S08SG4E2MSC - 8-Bit 40 MHz 4 KB MCU | NXP
S9S08SG4E2MSC

S9S08SG4E2MSC - 8-Bit 40 MHz 4 KB MCU | NXP

The NXP Semiconductors S9S08SG4E2MSC is an 8-bit HCS08 CISC microcontroller with 4 KB of flash program memory, 256 bytes of RAM, a 40 MHz core, and an 8-pin SOIC package. It is designed for space-constrained embedded systems, LIN slave nodes, general-market controls, and applications operating in high-temperature environments up to 150°C ambient. Its integrated oscillator and compact package reduce external component count and simplify PCB layout. What is an 8-bit MCU? An 8-bit microcontroller is a single-chip embedded controller containing a processor core, program memory, data memory, I/O ports, timers, and communication peripherals. The S08 family is an entry-level to mid-range platform within the broader HCS08 microcontroller hierarchy, intended for control logic where 8-bit processing, low pin count, and deterministic peripheral access are more important than high computation bandwidth. The S9S08SG4E2MSC combines 40 MHz processing with 4 KB flash and 256 x 8 RAM. Its listed connectivity includes I²C, LINbus, SCI, and SPI, while integrated peripherals include LVD, POR, PWM, and WDT. The device provides four I/O lines according to the supplied component data, making it suitable for compact sensing, actuator-control, communication, and industrial interface modules. Its internal oscillator supports standalone operation without an external crystal in suitable clock configurations. The S08 core uses CISC-style instruction execution, and the peripheral set is organized for embedded control rather than high-bandwidth data processing. The 8-pin SOIC outline is particularly useful where board area is constrained but a conventional surface-mount footprint is preferred. Typical applications include LIN slave modules, compact motor or actuator controllers, sensor nodes, small industrial control boards, communication interfaces, and high-temperature embedded products. For these designs, the main engineering trade-offs are limited flash capacity, four I/O lines, and the modest 8-bit processing bandwidth. The part is therefore best selected when its integrated communication and control peripherals meet system requirements without requiring larger-memory MCU platforms. This page consolidates manufacturer information, distributor specifications, lifecycle data, sourcing context, and application guidance for the S9S08SG4E2MSC. Verify the complete pinout, electrical limits, oscillator settings, and peripheral configuration against the official NXP datasheet before releasing a production design.

USD $0,95 Auf Lager
S9S08SG4E2MTJ - 8-bit S08 MCU, 4KB Flash, 40MHz | NXP
S9S08SG4E2MTJ

S9S08SG4E2MTJ - 8-bit S08 MCU, 4KB Flash, 40MHz | NXP

The NXP Semiconductors S9S08SG4E2MTJ is an 8-bit S08-core microcontroller with 4KB flash memory, 40MHz bus-capable HCS08 CPU operation, and an automotive-qualified -40 to +125 degC operating range, housed in a 20-pin TSSOP (MTJ) surface-mount package. An 8-bit microcontroller (MCU) integrates a processor core, program memory (flash), data RAM, and peripherals such as timers, serial interfaces, and ADC onto a single chip. Within the power-management hierarchy of embedded systems, an MCU sits between simple logic ICs and 32-bit application processors, executing control loops, communication protocols, and system supervision tasks. The S08SG family is NXP's entry-level to mid-range 8-bit offering, positioned for cost-sensitive embedded control. Key features of the S9S08SG4E2MTJ include 4KB (4K x 8) in-system-programmable flash with 256 bytes of RAM, support for up to 32 interrupt/reset sources, and the HC08 instruction set extended with the BGND background-debug instruction for non-intrusive on-chip debugging. The family is explicitly targeted at LIN slave nodes, general-market applications, and space-constrained designs where a small 20-pin footprint is essential. Architecturally, the HCS08 central processor unit is a fully static CMOS core derived from the HC08 ISA; per manufacturer family documentation, the CPU can run at up to 40MHz in the standard temperature range, with a derated clock ceiling when ambient temperature rises above specified limits. Flash erase/program control and oscillator options are integrated on-chip, minimizing external component count and bill-of-material cost. Typical applications include automotive LIN slave modules such as seat controllers, mirror actuators, and wiper controls; industrial controls requiring automotive-grade reliability at -40 to +125 degC; and small consumer appliance boards where 4KB of code space and 20 pins are sufficient. A key design consideration: verify the bus-clock versus temperature derating table in the NXP datasheet - the maximum CPU frequency drops when the junction temperature exceeds the standard range, which affects timing-critical code. This page adds value beyond the manufacturer datasheet by synthesizing distributor availability data, drop-in alternative analysis within the S08 family, and practical design guidance for automotive-grade 8-bit MCU selection.

USD $0,85 Auf Lager
S9S08SG4E2VTG - 8-bit S08 MCU, 4KB Flash, 40MHz | NXP
S9S08SG4E2VTG

S9S08SG4E2VTG - 8-bit S08 MCU, 4KB Flash, 40MHz | NXP

The NXP S9S08SG4E2VTG is an 8-bit S08SG-family microcontroller with 4 KB (4K x 8) on-Chip Flash, a 40 MHz HCS08 CPU, packaged in a 16-pin TSSOP and qualified to -40 °C to +105 °C with automotive-grade pedigree. It is designed for LIN slave nodes, general-market embedded control, and space-constrained PCB layouts that need a low-pin-count 8-bit MCU with deterministic interrupt response. Background: An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data-path CPU, on-chip Flash for program storage, on-chip SRAM for data, and a fixed set of peripherals (timers, ADC, communications, GPIO). The S08 core is Freescale/NXP's enhanced 8-bit architecture (HCS08), which adds the BGND instruction and up to 32 interrupt/reset sources on top of the legacy HC08 instruction set. 8-bit MCUs sit below 16-bit/32-bit MCUs in the microcontroller taxonomy (8-bit MCU -> microcontroller -> embedded processor -> semiconductor) and remain the dominant choice for cost- and pin-sensitive nodes such as body electronics, sensors, and human-machine interfaces where deterministic real-time behaviour matters more than raw compute throughput. Key features include 4 KB Flash with in-application programmability, 256 B RAM, an internal clock generator plus an external-resistor option, multiple timers (MTIM, RTI, TPM), an 8-channel 10-bit ADC, SCI/SPI/I2C, and up to 14 GPIO depending on package. A low-power Run/Stop/Wait modes architecture and a typical 2.7 V-5.5 V supply range simplify battery and 12-V-board-net designs after external regulation. Technical depth: the HCS08 core executes most instructions in 1-2 bus cycles at 40 MHz internal bus (the CPU core itself can run up to 50 MHz internally, gated to 40 MHz for Vdd > 2.7 V and 36 MHz at higher temperature extremes), with a 16-bit stack-pointer pointer SP, X-indexed addressing, and BCD instructions inherited from HC08. The Flash controller supports in-application programming via a small resident bootloader when paired with the right BDM interface. Typical applications include LIN slave ECUs in automotive body modules, HVAC fan and blower control, appliance user-interface boards, sensor signal conditioning front-ends, and compact industrial sensor hubs. The TSSOP-16 footprint keeps board area under 25 mm². Design consideration: choose the TSSOP-16 (VTG) variant only when you have <=14 GPIO and a 16-pin layout budget; if you need more I/O or more Flash/RAM, step up within the S08SG family to the 20- or 28-pin packages. Plan the supply rail with a 100 nF + 4.3 µs bulk-decoupling pair near VDD plus VSS, and respect the 2.7 V minimum for full 40 MHz operation. This page synthesises distributor pricing, drop-in alternatives within the S08SG family, and practical design notes not found in the manufacturer datasheet.

USD $1,78 Auf Lager
S9S08SG8E2CTJ - 8-bit S08 MCU 8KB Flash 40MHz | NXP
S9S08SG8E2CTJ

S9S08SG8E2CTJ - 8-bit S08 MCU 8KB Flash 40MHz | NXP

The NXP S9S08SG8E2CTJ is an 8-bit microcontroller based on the S08 core, operating at up to 40 MHz bus speed, with 8KB of Flash program memory and 512 bytes of RAM, packaged in a 20-pin TSSOP (CTJ) surface-mount package and qualified for automotive applications with an operating temperature range of -40C to +85C. An 8-bit microcontroller (MCU) is an integrated circuit that combines a processor core, program memory, data memory, and peripheral functions on a single chip. Within the system hierarchy, it belongs to the embedded processor family: microcontroller unit (MCU) -> embedded processor -> semiconductor. The S08 architecture from NXP (originally Freescale Semiconductor) is an entry-level to mid-range 8-bit core widely used in cost-sensitive embedded control. Key features of the S9S08SG8E2CTJ include 8KB (8K x 8) of Flash program memory, 512 bytes of on-chip RAM, and a rich connectivity set: I2C, LINbus, SCI, and SPI serial interfaces. On-chip peripherals include a low-voltage detector (LVD), power-on reset (POR), PWM capability, and a watchdog timer (WDT), reducing external component count in compact designs. Technically, the SG family was designed by NXP for LIN slave nodes, general-market embedded control, high-temperature operation (up to 150C ambient in some family grades), and space-constrained applications. The automotive qualification makes it suitable for body electronics and in-vehicle nodes where AEC-grade reliability screening is expected. The 16 available I/O pins and 20-TSSOP footprint allow dense, low-cost PCB layouts. Typical applications include LIN slave modules in vehicles, door and seat controllers, small appliance control, motor-assist fan control, and general-purpose sensor interfacing. The LINbus support is a primary reason automotive tier-one suppliers selected this family. A key design consideration: NXP has marked this part End of Life (EOL), so new designs should plan for last-time-buy quantities or a pin-compatible migration path within the S08SG/S08 families, and verify current stock with distributors. This page synthesizes distributor pricing, verified specifications, drop-in alternative options, and practical design notes not found in a single manufacturer source.

USD $1,48 Auf Lager
S9S08SG8E2MSC - 8-Bit 40MHz 8KB Flash MCU | NXP
S9S08SG8E2MSC

S9S08SG8E2MSC - 8-Bit 40MHz 8KB Flash MCU | NXP

NXP Semiconductors S9S08SG8E2MSC is an 8-bit S08 microcontroller with 8 KB of Flash memory, a 40 MHz HCS08 core, four I/O ports, and operation from 2.7 V to 5.5 V in an 8-pin SOIC package. It is positioned for compact embedded systems, including LIN slave, general-market, automotive, and space-constrained designs, with an operating temperature range stated as -40°C to +125°C. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, I/O, and peripherals into one device. The S08 family belongs to the broader embedded-controller hierarchy: MCU, embedded processor, and semiconductor. This combination of Flash storage, a compact package, and a low-power operating range makes the S9S08SG8E2MSC suitable for control loops, communication nodes, sensor interfaces, and small motor or actuator systems where board area and cost are important. The S08 core operates at up to 40 MHz and supports the HCS08 instruction set with the added BGND instruction. The device supports up to 32 interrupt or reset sources, according to the supplied datasheet references, providing a flexible event-handling foundation for embedded control. Its Flash memory stores program code, while the available GPIO count supports connections to sensors, switches, indicators, and external control logic. The target is identified as RoHS compliant in the verified distributor data. The part is associated with LIN slave and general-market applications in the verified data. Its 2.7 V to 5.5 V supply range allows use in both 3.3 V and 5 V systems, subject to the complete manufacturer datasheet requirements. The automotive-qualified designation in one data excerpt indicates suitability for applications requiring elevated-temperature capability, but qualification status and production lifecycle should be checked against the current NXP product page before release to production. For replacement planning, the exact package and pin configuration are critical. The supplied cross-reference results identify several related S08 devices, but they do not establish that every listed candidate is a true pin-to-pin drop-in replacement. The safest selection process is to compare the SOIC-8 footprint, pin names, voltage limits, memory capacity, clock requirements, peripheral compatibility, and programming requirements in the manufacturer datasheet. The NXP product page is the authoritative starting point for current lifecycle, ordering, and documentation information. Distributor pages provide commercial context, while the target MPN’s verified listing confirms an 8-bit MCU, 8 KB Flash, 40 MHz operation, and an 8-SOIC package. Engineers should verify the exact pinout and electrical limits before schematic capture or PCB release. This page combines the verified target identity, package, memory, speed, voltage, temperature, and application information with sourcing context and practical replacement cautions. It also distinguishes confirmed facts from unavailable details: pin names, pricing tiers beyond the supplied unit reference, and drop-in alternatives require direct manufacturer or authorized-distributor confirmation.

USD $1,65 Auf Lager
S9S08SG8E2MTG - 8KB Flash 40MHz S08 MCU TSSOP-16 | NXP
S9S08SG8E2MTG

S9S08SG8E2MTG - 8KB Flash 40MHz S08 MCU TSSOP-16 | NXP

The NXP S9S08SG8E2MTG is an 8-bit S08SG family microcontroller built on the HCS08 core, integrating 8KB of flash memory and delivering up to 40MHz CPU performance in a 16-pin TSSOP package. The device operates from a 2.7V to 5.5V supply rail, supports 3.3V and 5V systems, and is qualified to AEC-Q100 automotive standards with a -40C to +125C operating range. An 8-bit microcontroller (MCU) is a compact processor that integrates a CPU, memory, and peripheral interfaces on a single silicon die. Within the embedded hierarchy, MCUs sit below microprocessors (MPUs) but above simple logic devices, providing application-specific compute for sensing, control, and human-machine-interface tasks. The S08 family is NXP's HCS08 architecture family, optimized for low cost, deterministic real-time response, and ultra-low peripheral power draw in LIN-safety and general-purpose designs. Key features include 512 bytes of RAM, an internal clock source, multiple timer channels, an analog-to-digital converter, and LIN/SCI communication interfaces. The SG sub-family specifically targets LIN-slave, general-market, high-temperature (up to +150C ambient), and space-constrained applications. The 16-pin TSSOP (TSSOP-16) form factor keeps the BOM footprint small while exposing 12 GPIO pins and full background-debug (BGND) support via the HC08 instruction set. Architecturally, the device combines the HC08 instruction set with the added BGND instruction for in-circuit debugging, and supports up to 32 interrupt/reset sources for real-time event handling. The embedded flash supports both in-application and in-circuit programming, enabling firmware updates in the field over LIN or SCI. The 0.25um SGF process node keeps leakage low and contributes to the part's suitability for always-on automotive body electronics. Typical applications include automotive body controllers, LIN slave nodes, sensor interface modules, HVAC actuators, and general-purpose industrial control. The wide voltage range and AEC-Q100 qualification make it especially attractive for under-hood and cabin modules where temperature swings and supply transients stress inductive-switching loads. The 16-pin TSSOP footprint also suits hand-held consumer devices. When designing with this device, ensure your vector table, RAM allocation, and stack fit within the 8KB flash and 512B RAM budgets; this is a small-memory part optimized for code efficiency rather than feature density. Reserve one GPIO for the external reset or BKGD line to allow factory programming without rework. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. It is intended to accelerate the engineer from descriptive source-selection through schematic review to prototype bring-up in a single sitting.

USD $1,35 Auf Lager
S9S08SG8E2VTJR - 8-Bit S08 MCU, 8KB Flash, 40MHz, TSSOP-20 | NXP
S9S08SG8E2VTJR

S9S08SG8E2VTJR - 8-Bit S08 MCU, 8KB Flash, 40MHz, TSSOP-20 | NXP

The NXP S9S08SG8E2VTJR is an 8-bit S08-family microcontroller built around the HCS08 CPU core, offering 8KB of on-chip Flash, 40 MHz maximum CPU clock, and a 2.7 V to 5.5 V supply range, packaged in a 20-pin TSSOP (TJR). It is qualified for industrial temperature operation (-40°C to +105°C) and is pin-compatible with the smaller-memory S9S08SG4E2VTJR variant. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), data memory (RAM), and peripherals such as timers, ADC, and communication interfaces into one package. The S08 family from NXP (formerly Freescale) is an evolution of the legacy HC08 core, adding the BGND instruction for background debugging while preserving the classic CISC instruction set. MCUs sit at the lowest layer of embedded computing, beneath microprocessors (MPUs), and are the workhorse of cost-sensitive, deterministic control applications such as appliance motor control, sensor interfacing, and human-machine input handling. Key features include an HCS08 CPU delivering up to 40 MHz (36 MHz above the upper industrial limit), up to 32 interrupt/reset sources, integrated analog and digital peripherals, on-chip Flash for field-upgradeable firmware, and an internal clock source option. The S9S08SG8E2VTJR is offered with -40°C to +105°C industrial temperature support, and supports up to 5.5 V operation making it suitable for both 3.3 V and 5 V system designs. From an architectural standpoint, the S9S08SG8E2VTJR uses a 0.25 µm SGF process node and an HCS08 CPU core (a CISC design with the BGND background-debug instruction), allowing legacy HC08 object code to run with minimal modification. The integration of Flash, RAM, timers, ADC, and communication peripherals on the same die reduces external component count and PCB area. A single 2.7 V to 5.5 V supply rail simplifies power-tree design across 3.3 V and 5 V systems. Typical applications include appliance and white-goods control, industrial sensor interfaces, low-cost motor control front-ends, automotive body and chassis subsystems, and consumer electronics human-interface boards. The wide operating voltage and industrial temperature grade also make it attractive for building automation and HVAC peripheral modules. When designing with this MCU, reserve the BGND pin for in-circuit debugging if development cycles need hardware breakpoints. Ensure the supply decoupling network (typically 100 nF plus 4.7 µF bulk) is placed within 5 mm of the VDD pins, and verify the chosen Flash programming voltage matches the application VDD range. This page synthesizes distributor pricing, drop-in alternatives, parametric comparison, and design considerations not found in the manufacturer datasheet alone.

USD $1,78 Auf Lager
S9S08SL16F1CTJ - 8-bit S08 MCU, 16KB Flash, LIN, 20-TSSOP | NXP
S9S08SL16F1CTJ

S9S08SL16F1CTJ - 8-bit S08 MCU, 16KB Flash, LIN, 20-TSSOP | NXP

The NXP Semiconductors (formerly Freescale) S9S08SL16F1CTJ is an 8-bit HCS08 CISC microcontroller featuring 16KB of Flash program memory, 512 bytes of RAM, and 256 bytes of EEPROM, housed in a 20-pin TSSOP package and qualified to automotive-grade -40C to +85C. It operates from a 2.7V to 5.5V supply and integrates an embedded Slave LIN Interface Controller (SLIC) for body electronics networking. An 8-bit microcontroller (MCU) is a compact, deterministic computing element that integrates a CPU, non-volatile program memory (Flash/ROM), volatile working memory (RAM), and a set of on-chip peripherals (timers, ADC, communication blocks, GPIOs) into a single silicon die. In the embedded hierarchy, the S08 family sits below 16-bit and 32-bit MCUs in code density but above fixed-function logic ICs, offering a favourable cost-per-I/O ratio for high-volume, latency-sensitive control tasks such as sensor conditioning, actuator driving, and field-bus slaves. Key features of the S9S08SL16F1CTJ include a 40 MHz S08 CPU core, twelve 10-bit Analog-to-Digital Converter (ADC) channels, sixteen general-purpose I/O pins, and four serial communication interfaces - I2C, LINbus, SCI (UART), and SPI - enabling simultaneous connections to sensors, actuators, and an in-vehicle network. On-chip peripherals also include Low-Voltage Detection (LVD), Power-On Reset (POR), Pulse-Width Modulation (PWM) outputs, and a Watchdog Timer (WDT) for safety-critical loop integrity. The 256-byte embedded EEPROM, separate from the Flash array, allows byte-erasable parameter storage without disturbing code, ideal for trim, calibration, and LIN configuration data. The S08SL sub-family is engineered specifically for automotive body and chassis LIN slave nodes (window lift, mirror control, seat control, HVAC damper, lighting modules), where the integrated SLIC offloads the LIN protocol state machine from the CPU and reduces firmware overhead. The 0.25um process and 5V-tolerant I/O simplify interfacing to legacy analog sensors and 12V automotive buses via external regulators. Typical applications include LIN slave nodes, automotive body controllers, sensor interface modules, HVAC actuators, LED lighting drivers, and low-cost industrial control boards that require AEC-Q100-grade reliability. When designing with this part, allocate one timer for the LIN baud-rate generation (typically 19.2 kbps) and reserve the dedicated SLIC pin group for bus TX/RX. Add a 100 nF decoupling capacitor adjacent to each VDD pin, and keep the analog AVREF/AVDD traces short and guarded by a ground pour to preserve ADC accuracy. This page synthesizes distributor pricing, pin-compatible S08SL/S08EL drop-in alternatives, and practical design notes not found in the manufacturer datasheet, enabling faster design-in and BOM risk assessment.

USD $2,18 Auf Lager
S9S08SL8F1CTJ - 8-bit 40MHz MCU 8KB Flash TSSOP-20 | NXP
S9S08SL8F1CTJ

S9S08SL8F1CTJ - 8-bit 40MHz MCU 8KB Flash TSSOP-20 | NXP

The NXP Semiconductors S9S08SL8F1CTJ is an 8-bit S08-core microcontroller unit (MCU) operating at up to 40 MHz with 8 KB (8K x 8) of flash memory, housed in a 20-pin TSSOP package with 4.40 mm body width. It belongs to the S08SL family, which integrates an embedded slave LIN interface controller (SLIC) and EEPROM to increase LIN slave node performance and reduce development time in automotive and industrial networks. An 8-bit MCU is a microcontroller whose CPU processes data in 8-bit words, sitting in the hierarchy of microcontroller -> embedded processor -> integrated circuit. MCUs combine a processor core, program memory (flash), data memory, and peripherals such as timers, ADCs, and serial interfaces on a single chip, making them the backbone of cost-sensitive embedded control systems. Key features of the S9S08SL8F1CTJ include the 40 MHz S08 CPU core for fast interrupt response, 8 KB of in-circuit programmable flash for firmware storage, an integrated LIN slave interface controller (SLIC) that offloads LIN 2.x protocol handling from software, and an integrated EEPROM block for non-volatile parameter storage without external memory. The device operates over a -40 C to +85 C industrial temperature range per distributor data (LCSC) and includes a 10-bit ADC for analog signal measurement. Technically, the S08SL family is built on a 0.25 um process (per NXP part description: 9S08 UC W/ 32K 0.25UM SG) and targets automotive LIN slave nodes such as window lifters, seat controls, wiper modules, and lighting modules. The SLIC subsystem reduces CPU load and simplifies certification of LIN slave communication stacks. Typical applications include LIN bus slave nodes in automotive body electronics, small appliance and HVAC control boards, battery-powered sensor nodes, and low-cost industrial actuators where an 8-bit MCU with LIN connectivity reduces system cost. For design, verify the exact supply voltage range, EEPROM size, and peripheral allocation in the NXP S08SL reference manual, as these parameters vary across family members and temperature grades. Confirm the CTJ suffix grade matches your ambient requirements. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, with pricing and availability verified against distributor listings as of 2026-10-18.

USD $1,42 Auf Lager
S9S08SL8F1MTL - 8-bit 40MHz MCU 8KB Flash 28-TSSOP | NXP
S9S08SL8F1MTL

S9S08SL8F1MTL - 8-bit 40MHz MCU 8KB Flash 28-TSSOP | NXP

The NXP S9S08SL8F1MTL is an 8-bit S08 microcontroller with a 40 MHz internal bus clock, 8KB (8K x 8) Flash program memory, 512 bytes of RAM, 256 bytes of EEPROM, and 22 general-purpose I/O lines, housed in a 28-pin TSSOP (4.40 mm width) package. It operates from 3.3 V or 5 V supplies and is targeted at automotive LIN slave nodes and general-purpose embedded control. An 8-bit microcontroller is a single-chip computer whose CPU processes 8-bit data words. Within the power-management IC hierarchy, MCUs like the S08SL8 sit at the lowest-complexity tier of NXP's embedded processor range, below the 16-bit and 32-bit families, and are optimized for cost-sensitive, low-pin-count control tasks such as body electronics, sensor interfacing, and serial communication nodes. Key features include 16-channel 10-bit ADC with 2.5 us conversion time, automatic compare function, internal temperature sensor, and internal bandgap reference channel; a LIN bus-capable serial interface set (I2C, LINbus, SCI, SPI); and system peripherals including LVD, POR, PWM, and a watchdog timer (WDT). The embedded EEPROM allows calibration data and configuration values to be stored without external memory, a significant advantage in LIN slave designs. The S08SL family (0.25 um SGF process) is designed around NXP's embedded slave LIN interface controller (SLIC) concept, which increases LIN slave performance and reduces development time. The CISC S08 core delivers 40 MHz operation, and the oscillator accepts an external source for applications requiring precise timing. The SL family emphasizes ultra-low-power stop modes for battery-connected nodes. Typical applications include automotive LIN slave modules (window lifters, seat controllers, mirror adjusters), battery-powered portable electronics, and small industrial sensor nodes where a 10-bit ADC and LIN connectivity on a 28-pin footprint are sufficient. Design consideration: because the S08SL8 provides only 8KB of Flash and 512B of RAM, firmware footprint should be validated early; the pin-compatible S9S08SL16F1MTLR doubles Flash at 16KB for headroom without PCB change. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $1,72 Auf Lager
S9S12B128F0MFUE - 16-bit 128KB Flash Automotive MCU QFP-80 | NXP
S9S12B128F0MFUE

S9S12B128F0MFUE - 16-bit 128KB Flash Automotive MCU QFP-80 | NXP

The NXP S9S12B128F0MFUE is a 16-bit HCS12-family microcontroller with 128KB flash, 1KB EEPROM, 4KB RAM, and a 25MHz CPU speed, housed in an 80-pin LQFP (14x14 mm) package qualified for automotive multiplexing applications. It integrates CAN, SCI, SPI, and I2C connectivity, a 10-bit ADC, PWM, POR, and a watchdog timer for safety-critical body electronics. The part is specified for the -40C to +125C automotive Grade 1 temperature range and is qualified to AEC-Q100. Background: A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (flash/ROM), data memory (RAM), and a rich set of peripherals (ADCs, timers, communication controllers). The HCS12 is NXP's 16-bit CISC architecture descended from the Freescale HC11/HC12 lineage, optimised for deterministic real-time control in cost-sensitive automotive and industrial designs. Within NXP's MCU hierarchy it sits between 8-bit S08 parts and 32-bit Power Architecture / S32K devices, making it a workhorse for body controllers, instrument clusters, lighting modules, and LIN/CAN nodes. Key features include a 25MHz bus clock delivering 25 MIPS, an on-chip 8-channel 10-bit ADC for analogue sensing, an enhanced capture/timer (ECT) module supporting PWM and input capture, and BDLC, SPI, SCI, and CAN controllers for in-vehicle networking. The HCS12 core's single-cycle 16-bit instructions and indexed addressing improve code density versus 8-bit MCUs, while background debug mode (BDM) eases in-circuit development. The S9S12B family is fully pin-compatible across memory and peripheral variants, allowing designers to scale (64KB / 128KB / 256KB) without changing the PCB. Built-in ECC on flash, a watchdog with dedicated oscillator, and low-voltage reset (LVR) support fail-safe automotive operation. Typical applications include body control modules, HVAC flap controllers, instrument clusters, LIN/CAN slave nodes, seat and mirror controllers, lighting ECUs, and gateway bridges for distributed automotive networks. Compared with switching regulators or BLDC pre-drivers, this MCU is the supervisory brain of an automotive electronic control unit. Design tip: Always enable the COP watchdog and the periodic interrupt timer (RTI) for the application, and route unused I/O to a defined state via the DDRx registers to avoid floating inputs in noisy automotive environments. This page synthesises distributor pricing, pin-compatible S9S12 alternatives, and practical design notes beyond what is found on the NXP product page or in the manufacturer datasheet.

USD $9,55 Auf Lager
S9S12B128F0VFUER - 16-Bit 128KB Flash 25MHz MCU | NXP
S9S12B128F0VFUER

S9S12B128F0VFUER - 16-Bit 128KB Flash 25MHz MCU | NXP

The NXP Semiconductors S9S12B128F0VFUER is a 16-bit HCS12 microcontroller with a 25 MHz maximum clock, 128 KB of flash program memory, and an 80-pin QFP package. It is identified as automotive qualified and is associated with the MC9S12B family of flash-based microcontrollers for automotive multiplexing applications. The device combines embedded control processing with CANbus, I2C, SCI, SPI, EEPROM, and analog-to-digital converter resources in one integrated package. A microcontroller is a programmable semiconductor that combines a processor core, memory, peripherals, and input/output interfaces into a single device. The HCS12 architecture provides the computational and peripheral foundation for embedded control, while the 16-bit S12 core supports automotive and industrial control tasks. In the system hierarchy, this MCU belongs to the embedded-controller category, connects to sensors and actuators, and provides deterministic communication and control functions. The verified component data identifies 128 KB of flash memory, 25 MHz operation, a -40°C to +105°C temperature range, an automotive-qualified identification, and an 80-QFP surface-mount package. One distributor result also reports 59 I/O pins, 8-channel 10-bit ADCs, 1K x 8 EEPROM, and CANbus, I2C, SCI, and SPI connectivity. The package and temperature range are important constraints when designing a production automotive or industrial control board. The S12 core and integrated communications peripherals make the MCU suitable for multiplexed vehicle networks, body electronics, sensor aggregation, actuator control, and embedded automotive modules. The 10-bit ADC supports analog measurement tasks, while CANbus, I2C, SCI, and SPI allow connection to sensors, memory, transceivers, and other controllers. The exact peripheral configuration, memory map, electrical limits, and qualification details must be confirmed against the manufacturer datasheet before release to production. A key design consideration is package and lifecycle validation. The supplied web results show both active distributor listings and a Rochester Electronics listing associated with Freescale Semiconductor, while one source reports a large inventory and another reports Tape & Reel packaging. Buyers should confirm current stock, traceability, temperature grade, and whether the purchased device is an original NXP/Freescale catalog item before using it in new automotive production. This product page consolidates the verified distributor specifications, availability references, package information, and technical context into a structured engineering record. It does not invent missing electrical limits, pin names, pricing, or qualification claims; unavailable values are explicitly marked for datasheet confirmation.

Angebot Auf Lager
S9S12B96F0CFUER - 16-bit 96MHz S12 MCU, 96KB, Automotive LQFP-80 | NXP
S9S12B96F0CFUER

S9S12B96F0CFUER - 16-bit 96MHz S12 MCU, 96KB, Automotive LQFP-80 | NXP

The NXP S9S12B96F0CFUER is a 16-bit microcontroller IC based on the S12 core, delivering up to 25MHz CPU clock with 96KB of flash memory, housed in an 80-pin LQFP package and qualified for automotive multiplexing use cases. It belongs to the MC9S12B family of 16-bit flash-based MCUs and is fully pin-compatible with other members of the family, allowing designers to scale between different memory and peripheral options without PCB rework. Operating temperature range is -40C to +85C, and the device is rated MSL-3 with a peak reflow temperature of 260C and a maximum time at peak reflow temperature of 40 seconds. A microcontroller (MCU) is a single-chip computer containing a processor, program and data memory, peripherals, and input/output interfaces on one integrated circuit. The 16-bit MCU category sits between 8-bit microcontrollers (typical of small appliances and simple logic) and 32-bit microcontrollers (typical of complex applications requiring RTOS, high-speed connectivity, or large memory footprints). Within NXP's portfolio, the S12/S12X family occupies the same mid-range 16-bit niche as dsPIC (DSPIC), MSP430, and Renesas RL78/RX, balancing deterministic interrupt latency with modest power consumption. Key features of the S9S12B96F0CFUER include 96KB flash, automotive-grade qualification, the LQFP-80 surface-mount footprint, S12 core architecture, and 25MHz operation. The flash memory provides in-application reprogrammability via the standard NXP BDM interface, and the family architecture ensures software portability across memory-size variants in the B-series. The S12 core is an enhanced 16-bit CISC architecture with a 20-bit ALU and 16-bit index registers, optimized for automotive body electronics. The peripheral set in the B family typically includes multiple CAN modules (msCAN), SCI/SPI, PWM channels, and timers suitable for body control modules. Typical applications include automotive body control modules (BCM), instrument cluster controllers, HVAC actuators, lighting controllers, and industrial CAN nodes. The pin-compatible family structure also makes the part useful as a drop-in upgrade for B-family designs requiring different memory densities. When designing with this device, ensure the BDM debug port is broken out to a header for firmware development, and follow NXP's AN for power-supply decoupling on VDDR/VSS pairs. Confirm reflow profile compliance with the MSL-3 floor-life spec. This page synthesizes distributor pricing from FPGACenter (5.538 units in stock from $16.60 as of 2026-10-20), drop-in alternatives within the MC9S12B family, and practical design notes not found in the standalone datasheet.

USD $11,50 Auf Lager
S9S12C128F0MFUE - 16-Bit 128KB Flash 25MHz MCU | NXP
S9S12C128F0MFUE

S9S12C128F0MFUE - 16-Bit 128KB Flash 25MHz MCU | NXP

The NXP Semiconductors S9S12C128F0MFUE is an automotive-qualified 16-bit S12 microcontroller with 128KB of embedded Flash, a 25MHz maximum core frequency, and an 80-pin QFP package. Designed for industrial and automotive network applications, it combines a 16-bit MCU architecture, flash-based program memory, and an operating-temperature range of -40°C to +125°C in one package. The verified listing identifies the S12 core, 128KB Flash, 25MHz speed, automotive qualification, gull-wing lead form, square QFP package, and 80 terminals. A microcontroller is a programmable integrated circuit that executes embedded control software from internal nonvolatile memory and interacts with sensors, actuators, communication links, and human-machine interfaces. The S9S12C128F0MFUE belongs to the flash-based MCU hierarchy, where the S12 core, embedded Flash, digital peripherals, and communication interfaces form a compact embedded-control platform. Its family positioning supports general-purpose industrial control and automotive networking designs rather than a narrowly dedicated signal-processing function. The most prominent verified features are the 128KB Flash capacity, 25MHz operating frequency, 16-bit S12 core, and broad -40°C to +125°C temperature range. Flash memory supports firmware retention without external nonvolatile storage, while the higher-frequency core provides computational headroom for real-time control tasks. The automotive temperature grade makes the device suitable for applications where temperature variation is greater than in ordinary commercial environments, subject to system-level qualification. Technically, the device integrates a 16-bit core with embedded program memory and package-level I/O in an 80-terminal QFP. The supplied search results describe the S12C family as part of a 48-, 52-, and 80-pin flash-based MCU family designed for general-purpose industrial and automotive network applications. The exact peripheral inventory, RAM capacity, supply voltage, electrical limits, and complete pin assignments were not provided in the verified data and should be confirmed in the manufacturer reference manual before design release. Typical application directions include automotive body or network control modules, industrial automation controllers, embedded communication equipment, sensor-interface systems, and general-purpose industrial electronics. For each design, engineers should verify clock requirements, peripheral multiplexing, electrical timing, reset behavior, and software support against the official datasheet. The 80-pin QFP also requires careful land-pattern matching and thermal-aware PCB layout because of its larger body and gull-wing leads. When designing around the S9S12C128F0MFUE, use the verified QFP-80 footprint and route all required power, ground, clock, reset, programming, and communication nets according to the official pinout. Do not infer analog, communication, or timing functions from the family name alone; each pin and peripheral must be checked in the reference manual. This page combines verified part identity, package data, temperature limits, sourcing links, and selection caveats without inventing unprovided electrical specifications. The information below is intended to help engineers locate the correct datasheet, assess commercial availability, compare verified attributes, and select the part for temperature- and memory-sensitive embedded systems. The manufacturer reference manual remains the controlling source for final electrical, pinout, software, and qualification decisions.

Angebot Auf Lager
S9S12C128J2CFUE - 16-Bit 128KB MCU 25MHz | NXP
S9S12C128J2CFUE

S9S12C128J2CFUE - 16-Bit 128KB MCU 25MHz | NXP

The NXP Semiconductors S9S12C128J2CFUE is a 16-bit S12-core microcontroller with 128KB flash memory, a 25 MHz stated rating from the NXP product page, and an 80-pin QFP package. The distributor listing also identifies a 50 MHz HCS12 device with 128KB flash in an 80-QFP package, so the maximum clock interpretation should be checked against the applicable datasheet revision before design release. A microcontroller is a programmable integrated circuit that executes firmware, reads sensor inputs, controls actuators, and coordinates embedded-system timing. In the product hierarchy, this device belongs to the HCS12/S12 automotive and industrial embedded-control family, which sits below general-purpose microcontrollers and above application-specific control logic. The verified manufacturer snippet highlights a 16-bit S12 core, 128KB flash, 25 MHz, a -40°C to +85°C temperature range, automotive qualification, and QFP-80 packaging. The related MC9S12C128CFUE family information identifies flash-based general-purpose devices, an on-chip voltage regulator, a 2.97 V to 5.5 V external supply range, and a PLL circuit. Those family details are useful context, but they should not be treated as target-specific values unless confirmed in the exact S9S12C128J2CFUE datasheet. Typical embedded uses include automotive body and network control modules, industrial controllers, sensor interfaces, actuator controllers, and real-time monitoring equipment. The 80-pin QFP package provides a conventional leaded footprint that is easier to inspect and rework than a fine-pitch BGA, while requiring more PCB area than a compact QFN. Design engineers should confirm the complete pin assignment, clock configuration, memory map, electrical limits, and automotive qualification statement before layout or firmware release. This page separates verified product-page facts from unresolved details and does not invent missing specifications. The component is positioned as a 16-bit embedded controller rather than a low-power sensor node or a high-performance application processor. Its QFP-80 format and 128KB flash make it relevant to designs needing transparent inspection, conventional prototyping, and automotive-oriented control logic. This data page consolidates the official NXP description, distributor availability references, package information, and engineering-oriented caveats while explicitly identifying the clock discrepancy and the fields that still require datasheet confirmation.

Angebot Auf Lager
S9S12C128J2VFUE - 16-Bit 128KB Flash 80-QFP MCU | NXP
S9S12C128J2VFUE

S9S12C128J2VFUE - 16-Bit 128KB Flash 80-QFP MCU | NXP

The NXP Semiconductors S9S12C128J2VFUE is a 16-bit S12C-family HCS12 microcontroller with 128 KB of flash memory, operation up to 25 MHz according to the component summary, and an 80-pin QFP package measuring 14 x 14 mm. It is identified as automotive qualified and supports temperature grades listed as -40°C to +105°C in the verified component description. A microcontroller is a programmable integrated circuit that combines a processor core, memory, and peripherals in one package. The S12C family combines a 16-bit core with flash-based program memory and is positioned for general-purpose industrial and automotive network applications. Unlike a simple logic device, the S9S12C128J2VFUE can execute embedded software, manage external interfaces, and control system behavior through its integrated peripherals. The verified listing identifies the device as a 16-bit MCU with an S12 core, 128 KB flash, 25 MHz operation, automotive qualification, and an 80-QFP package. A separate distributor listing describes the related HCS12 device as 50 MHz; because the verified sources conflict on maximum frequency, the package-level claims should be confirmed against the applicable NXP datasheet before selecting timing, clocking, or firmware configurations. Typical embedded uses include automotive body or network electronics, industrial controllers, sensor interfaces, actuator controllers, and communication equipment where a low-cost 16-bit microcontroller with on-board flash is useful. The 80-QFP package provides a larger pin count than small 32-pin devices, potentially supporting more external signals and peripheral connections while requiring careful PCB layout. When designing a board around this MCU, verify the exact pinout, power rails, clock configuration, reset requirements, and peripheral multiplexing in the NXP datasheet. Do not infer compatibility from the package name alone. The QFP footprint and exposed lead arrangement must match exactly, and firmware should be tested against the intended voltage, temperature, and automotive operating conditions. This page consolidates the verified component identity, package information, source listings, and practical selection considerations. It also distinguishes confirmed facts from data that requires manufacturer-documentation review, helping engineers avoid treating conflicting distributor descriptions as final design specifications.

Angebot Auf Lager
S9S12C32F1MFA2E557 - 16-bit HCS12 MCU 50MHz 32KB | NXP
S9S12C32F1MFA2E557

S9S12C32F1MFA2E557 - 16-bit HCS12 MCU 50MHz 32KB | NXP

The NXP Semiconductors S9S12C32F1MFA2E557 is a 16-bit HCS12 C-family microcontroller running at up to 50 MHz with 32KB (32K x 8) on-chip FLASH, housed in a 48-pin LQFP (7x7 mm) surface-mount package. A 16-bit HCS12 microcontroller is a member of the microcontroller (MCU) hierarchy: embedded processor, system-on-chip, integrated circuit. The HCS12 (S12) core, originally developed by Freescale Semiconductor and now manufactured by NXP, executes the established 68HC12 instruction set and integrates CPU, memory, clock generation, and peripheral functions on a single die, making it a complete embedded control solution. Key features of the S9S12C32F1MFA2E557 include a 50 MHz bus-capable 16-bit CPU core, 32KB of single-supply FLASH program memory, and 31 general-purpose I/O lines. Peripheral connectivity covers CANbus, SCI (serial communications interface), SPI (serial peripheral interface), and an external bus interface (EBI/EMI), enabling automotive and industrial networked designs. On the analog side, the device integrates an 8-channel 10-bit SAR analog-to-digital converter, sufficient for sensor acquisition tasks such as battery voltage monitoring, temperature measurement, and potentiometer or throttle-position sensing in vehicle electronics. The HCS12 architecture is widely used in body electronics, instrument clusters, and motor control nodes where legacy tool chains and code bases remain valuable. Typical applications include automotive body modules, industrial CANbus nodes, consumer appliance controllers, and legacy HCS12 design maintenance. The LQFP-48 (7x7) footprint supports standard surface-mount assembly processes. Designers should verify exact operating temperature range, RAM size, EEPROM size, and supply voltage parameters against the official NXP datasheet, as distributor listings summarize only headline specifications. This page synthesizes distributor availability data, drop-in family alternatives, and practical design guidance not consolidated in the manufacturer datasheet, with pricing and stock references as of 2026-10-18.

Angebot Auf Lager
S9S12C32F1VFA1E - 16-Bit 32KB Flash MCU | NXP | Automotive
S9S12C32F1VFA1E

S9S12C32F1VFA1E - 16-Bit 32KB Flash MCU | NXP | Automotive

The NXP Semiconductors S9S12C32F1VFA1E is a 16-bit S12-core microcontroller operating at 25 MHz, with 32 KB of flash memory and an external supply range of 2.97 V to 5.5 V, housed in a 48-pin LQFP package. It is automotive qualified for an operating range of -40°C to +105°C and targets general-purpose industrial and automotive network applications. A microcontroller is a programmable integrated circuit containing a processor core, nonvolatile program memory, data memory, and peripherals that control embedded-system inputs and outputs. The S12C belongs to a 48-, 52-, or 80-pin flash-based MCU family and combines deterministic 16-bit processing with external communications, timing, and control functions. Its on-chip bandgap-based voltage regulator generates the internal digital VDD supply. Key verified features include a 16-bit S12 core, 25 MHz maximum frequency, 32 KB flash, a 2.97 V to 5.5 V external supply range, and an integrated phase-lock loop circuit. These resources support embedded control loops that need more timing precision than an unsynchronized low-cost oscillator arrangement can provide. The automotive qualification and -40°C to +105°C temperature range distinguish it from typical consumer-temperature controls. The device is positioned within NXP's broader embedded processing hierarchy: S12 core, S12C microcontroller family, flash-based MCU, embedded controller, and semiconductor. That hierarchy matters because replacement decisions depend on exact software compatibility, memory organization, peripheral mapping, clock behavior, package pins, and qualification—not merely CPU frequency. A substitute with the same nominal clock or memory size may still require firmware and PCB changes. Typical uses include automotive body or network controllers, industrial automation modules, communication gateways, sensor-control systems, and compact embedded platforms. The PLL permits internal clock generation where the application requires derived clock domains, while the internal regulator separates the external operating supply from the internally regulated digital rail. The most important design step is to use the official NXP datasheet and pin configuration rather than treating a generic S12C listing as a complete electrical contract. Verify supply pins, decoupling, clock setup, reset behavior, unused I/O, programming, and all peripheral multiplexing before layout release. Because the verified data does not provide current unit prices, stock, complete pin names, or a manufacturer PDF URL, those fields remain explicitly unresolved rather than inferred.

Angebot Auf Lager
S9S12C96F0CFUER - 16-bit HCS12 MCU 96KB Flash | NXP Semiconductors
S9S12C96F0CFUER

S9S12C96F0CFUER - 16-bit HCS12 MCU 96KB Flash | NXP Semiconductors

The NXP Semiconductors S9S12C96F0CFUER is a 16-bit HCS12 microcontroller from the S12C family, featuring 96KB of on-chip Flash memory, 4KB RAM, and an industrial-grade operating temperature range, housed in an 80-pin LQFP surface-mount package. The device integrates the S12 CPU core running up to 25 MHz bus clock with a BDM (Background Debug Mode) interface, supporting in-circuit emulation and on-chip hardware breakpoints for embedded development workflows. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory (Flash/ROM), working memory (RAM), and a rich set of peripheral interfaces. The S9S12C96F0CFUER belongs to the HCS12 architecture family, a 16-bit MCU line widely deployed in automotive body electronics, industrial control, and consumer appliance applications. The S12C family specifically targets cost-sensitive designs requiring CAN connectivity, analog integration, and Flash-based field reprogrammability without the overhead of larger HCS12 derivatives. Key features of this part include an enhanced CAP (TPU) timer system, an 8-channel 10-bit ADC, up to two SCI (UART) ports, one SPI interface, an I2C-compatible module, and an MSCAN (CAN 2.0A/B) controller. The device operates from 2.97V to 5.5V supply, supports single-wire BDM debugging, and offers an internal Phase-Locked Loop (PLL) for flexible clock generation. The wide supply range simplifies integration into both 3.3V and 5V system designs. The S12 core employs a 16-bit accumulator-based architecture with 20-bit ALU extensions (page registers), enabling efficient C code generation while preserving deterministic interrupt response. The on-chip voltage regulator permits single 5V rail operation by internally generating the core logic supply. A hardware Periodic Interrupt Timer (PIT) and real-time interrupt (RTI) provide a low-power tick source during STOP and WAIT modes. Typical applications include automotive body controllers, HVAC systems, instrument clusters, sensor interface nodes, industrial CAN-based distributed I/O, and consumer appliance control boards. The 96KB Flash supports moderate-sized application code plus bootloader space for field updates via CAN or SCI. The 80-pin LQFP footprint provides ample GPIO for parallel sensor acquisition and discrete actuator drive. When designing with this device, ensure the reset supervisor hold-time capacitor on the RESET pin meets the minimum 16 E-clock cycle requirement to avoid spurious startup. Place a 100 nF decoupling capacitor adjacent to each VDD/VSS pair, and route the oscillator traces with a guard ring to minimize EMI susceptibility. For CAN bus nodes, the bus termination and common-mode choke selection must conform to ISO 11898. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design considerations not found in the standalone manufacturer datasheet, accelerating your component selection and PCB bring-up workflow.

USD $10,78 Auf Lager
S9S12C96F0MFUER - 16-Bit 96KB Flash 25MHz MCU | NXP
S9S12C96F0MFUER

S9S12C96F0MFUER - 16-Bit 96KB Flash 25MHz MCU | NXP

The NXP Semiconductors S9S12C96F0MFUER is an automotive-qualified 16-bit microcontroller with a 25 MHz S12 core, 96 KB of embedded Flash, and an 80-lead square QFP package. It is designed for embedded control applications requiring deterministic operation, integrated Flash program memory, and operation across -40°C to +125°C. What is a 16-bit embedded microcontroller? A 16-bit embedded microcontroller combines a central processing unit, Flash memory, data memory, timers, serial interfaces, and digital I/O in one integrated circuit. Within the hierarchy of semiconductor devices, an MCU is a microcontroller and embedded-control component designed to execute firmware in motor, body, instrument, or industrial-control systems. The S12C96 family targets applications requiring more program storage than smaller S12 devices while retaining a familiar 16-bit architecture. The verified product information identifies 96 KB of Flash, a 25 MHz maximum core frequency, automotive temperature grade, and an 80-terminal QFP package. Its 16-bit processing architecture supports embedded control workloads where predictable computation and broad peripheral integration are more important than maximum processor-clock frequency. The extended -40°C to +125°C range makes it suitable for demanding industrial and automotive environments, subject to the complete manufacturer datasheet and qualification requirements. The 80-lead QFP provides substantially more external connections than a small-outline package, supporting devices whose integrated peripherals require numerous multiplexed I/O, communication, timer, analog, and power pins. Package selection remains important because gull-wing leads are inspectable after soldering but occupy more PCB area than leadless packages. Exact pin functions, multiplexing, memory organization, supply limits, peripheral configuration, and electrical characteristics were not included in the supplied verified data and therefore must be confirmed from the official device documentation before design release. Typical uses include automotive body and chassis controllers, climate-control modules, actuator controllers, sensor aggregation units, industrial automation equipment, and compact embedded control systems. In an automotive module, the MCU could execute control firmware, acquire sensor inputs, operate timers and communication interfaces, and manage actuator outputs within the -40°C to +125°C temperature grade. Design with the target voltage, clocking method, reset requirements, decoupling, programming interface, and exposed peripheral pin multiplexing verified against the manufacturer documentation. Do not substitute a mechanically similar QFP part solely by package shape; Flash size, core frequency, pin functions, memory map, qualification, and firmware compatibility must match. This page synthesizes verified distributor and manufacturer information with explicit data gaps for engineering review. Because the verified results do not provide a complete pin table, detailed electrical limits, lifecycle declaration, or validated replacement list, those items remain marked for confirmation rather than being inferred.

USD $14,68 Auf Lager
S9S12D64J2CFU - 16-bit S12 MCU, 64KB Flash, HCS12 Core | NXP
S9S12D64J2CFU

S9S12D64J2CFU - 16-bit S12 MCU, 64KB Flash, HCS12 Core | NXP

The NXP Semiconductors S9S12D64J2CFU is a 16-bit HCS12 microcontroller from the S12D family featuring 64KB of on-chip Flash memory and a 32KB HCS12 CPU core, designed for automotive and industrial real-time control applications. The device is packaged in a 80-pin QFP (QFU) form factor and integrates a rich peripheral set including multiple CAN 2.0 modules, SPI/SCI/I2C serial interfaces, timers, and an 8-channel 10-bit ADC for sensor acquisition and motor control. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, data RAM, and integrated peripherals. The HCS12 family occupies the 16-bit tier of the NXP S12 automotive MCU portfolio, positioned below 32-bit Power Architecture/S32K devices and above 8-bit S08 parts. HCS12 devices target cost-sensitive, deterministic, real-time applications where 8-bit throughput is insufficient and 32-bit cost is unjustified, typically body electronics, chassis control, and industrial sensor nodes. The S12D sub-family adds enhanced peripherals and larger memory compared to base S12 members. Key features of the S9S12D64J2CFU include 2KB of EEPROM for non-volatile data, 4KB of RAM for working data, a background debug module (BDM) for in-circuit programming and debug, and an enhanced capture timer suitable for PWM-driven motor control. The part supports single-supply 5V operation typical of automotive body controllers, and offers low-power stop and wait modes for quiescent-current-critical designs. The S9S12D64J2CFU is widely used in automotive body control modules, CAN node ECUs, HVAC actuators, instrument clusters, and industrial sensor hubs where deterministic interrupt response and CAN connectivity are essential. Designers favor the HCS12 architecture for its mature toolchain (CodeWarrior, GCC for S12) and large installed base of production-tested software. When designing with this part, allocate the BDM pins (BKGD, MODC) to a debug header accessible after PCB assembly, and observe the datasheet-recommended decoupling network of 0.1uF + 4.7uF bulk capacitors close to the supply pins. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $9,95 Auf Lager
S9S12DG12F1CFUE - 16-bit HCS12 MCU, 128KB Flash, 25MHz | NXP
S9S12DG12F1CFUE

S9S12DG12F1CFUE - 16-bit HCS12 MCU, 128KB Flash, 25MHz | NXP

The NXP S9S12DG12F1CFUE is an automotive-qualified 16-bit HCS12 CISC microcontroller featuring 128KB of on-chip Flash memory and a 25MHz bus clock, housed in an 80-pin PQFP (QFP-80) package. It integrates two asynchronous SCI (UART) channels, two 8-channel 10-bit ADC modules, and an 8-channel enhanced capture timer, delivering a complete automotive body and chassis control platform on a single die. What is an HCS12 microcontroller? The HCS12 (also called S12) is a 16-bit CISC microcontroller family introduced by Motorola (later Freescale, now NXP) as the evolution of the HC11 architecture. HCS12 devices belong to the broader category of automotive microcontrollers within the embedded MCU hierarchy (MCU -> microcontroller -> embedded processor -> semiconductor). The S12 core offers a rich peripheral set, large unified memory mapping, and BDM (Background Debug Mode) for non-intrusive in-circuit debug, making it a workhorse for automotive body electronics, industrial control, and white-goods motor control. Key features of the S9S12DG12F1CFUE include 128KB (128K x 8) Flash, 2KB to 4KB RAM depending on mask set, 25MHz maximum bus frequency, dual 10-bit ADC with 8 channels each, dual SCI/UART, an 8-channel enhanced capture timer, and a -40C to +85C automotive operating temperature range. The wide 2.5V/5V supply tolerance allows direct interfacing to 5V automotive sensors without level shifters. Technically, the S9S12DG12F1CFUE uses the S12 CPU with a 16-bit ALU, 20-bit address bus, and BDM for debug. The peripheral set is identical to the legacy MC9S12DG128 (the S9S12DG12F1CFUE is the automotive-qualified ordering code for that die), so designers familiar with CodeWarrior HC(S)12 toolchains can migrate existing firmware with minimal effort. The PQFP-80 footprint provides generous PCB escape routing for the 16-bit external bus when expanded memory is needed. Typical applications include automotive body control modules (BCM), instrument clusters, HVAC actuators, lighting controllers, anti-lock brake system (ABS) sensor interfaces, and industrial CAN-node endpoints. The automotive-grade qualification (per NXP ordering code 'S' prefix) makes the part suitable for under-hood and chassis-mounted ECUs that must survive wide temperature swings. When designing with the S9S12DG12F1CFUE, engineers should note that the part is now reported by NXP as End-of-Life (EOL) for new designs; long-term production runs should evaluate the active S12G or S12XS successor families, while existing designs can still source the part through authorized distributors. Decoupling must follow NXP's AN2720 guidance with 100nF ceramic caps on every VDD/VSS pair. This page synthesizes distributor pricing, drop-in same-package alternatives from the S9S12 family, and design considerations that complement the manufacturer datasheet rather than duplicating it.

USD $13,20 Auf Lager
S9S12DG12F1CPVE - 16-Bit 25MHz 128KB Flash MCU | NXP
S9S12DG12F1CPVE

S9S12DG12F1CPVE - 16-Bit 25MHz 128KB Flash MCU | NXP

The NXP Semiconductors S9S12DG12F1CPVE is a 16-bit HCS12/S12 automotive-qualified microcontroller with 128KB of flash memory, a 25MHz operating frequency, and a 112-pin LQFP package. It is designed for embedded automotive and industrial control systems requiring deterministic real-time peripherals, serial connectivity, and broad digital and analog input support. An HCS12 microcontroller is an embedded MCU architecture that combines a 16-bit CPU core with flash program memory, RAM, timers, communication interfaces, and analog peripherals on one device. The S12 family is commonly used in vehicle body, powertrain-adjacent, industrial, and communications systems where predictable timing, deterministic interrupt handling, and long product lifecycles are important. The verified part information identifies the S9S12DG12F1CPVE as a 16-bit MCU with an S12 core, 128KB flash, 25MHz operation, 91 I/O, and automotive qualification. Its listed peripherals include two asynchronous serial communications interfaces, an eight-channel interrupt/OC enhanced capture timer, and two eight-channel 10-bit analog-to-digital converters. The part also has connectivity described as CANbus, I²C, SCI, and SPI, plus PWM and watchdog functions. The device is offered in a 112-LQFP package measuring 20mm by 20mm according to the distributor data. Its operating temperature range is listed as -40°C to +85°C. This combination makes it relevant to automotive controllers, body electronics, industrial automation, sensor aggregation, actuator control, and CAN-connected embedded systems where a 16-bit control platform and multiple peripheral functions are required. Because the NXP product page identifies the component as end of life, new designs should verify long-term availability and migration requirements before committing to the device. Existing automotive or industrial products may still find supply through authorized distributors, but firmware, tooling, qualification records, and exact package compatibility should be reviewed before substitution. For PCB integration, use the manufacturer datasheet and package drawing to confirm every pin assignment, pin multiplexing, power requirement, clock configuration, and decoupling value. The LQFP footprint offers accessible pins for automated assembly, but the 112-pin package still requires careful escape routing, ground-plane continuity, and thermal planning. This product page consolidates verified manufacturer and distributor information, package details, lifecycle status, comparison candidates, and practical replacement guidance. Because the part is marked end of life and the supplied web results do not include detailed pricing or complete manufacturer pinout tables, those fields remain explicitly identified as requiring verification.

Angebot Auf Lager
S9S12DG12F1MFUE - S12 16-bit MCU 128KB Flash, 25MHz Auto QFP-80
S9S12DG12F1MFUE

S9S12DG12F1MFUE - S12 16-bit MCU 128KB Flash, 25MHz Auto QFP-80

The NXP S9S12DG12F1MFUE is a 16-bit S12 microcontroller unit (MCU) with 128KB Flash program memory, a 25 MHz HCS12 central processing unit, and an industrial -40/+125 degC temperature range, qualified to the AEC-Q100 automotive standard. It is housed in a 80-pin QFP package with 14x14 mm body outline. What is an S12 microcontroller? An S12 MCU is a 16-bit automotive microcontroller built around the CPU12 core (a variable-length instruction extension of the original HC11 architecture) widely adopted for body electronics, powertrain peripherals, and industrial real-time control. S12 parts typically integrate Flash, EEPROM, RAM, multiple timers, ADC channels, and on-chip CAN/LIN/SPI/SCI peripherals, sitting in the taxonomy as: 16-bit MCU -> automotive microcontroller -> embedded microcontroller -> semiconductor. Key features of the S9S12DG12F1MFUE include 128KB on-chip Flash, 8KB RAM, 2x asynchronous SCI, 8-channel IC/OC enhanced capture timer, two 8-channel 10-bit ADC modules, plus background debug mode (BDM) support. The 80-QFP footprint gives ample GPIO and peripheral access while remaining hand-solderable on moderate-density boards. The device employs a 16-bit CPU12 core with a 25 MHz bus clock and integrates a robust peripheral set for automotive body and chassis subsystems. Internal PLL and oscillator support a wide range of external crystals, and on-chip voltage regulation minimizes external power-tree complexity. The Flash memory supports in-application reprogramming and security-lock modes for OEM IP protection. Typical applications include automotive body control modules (BCMs), HVAC actuators, instrument clusters, lighting controllers, industrial sensor hubs, and CAN-connected slaves. Pin compatibility across the S12D family enables flexible in-design transitions between density variants. When designing with this part, note that the 125 degC automotive temperature grade requires careful thermal management inside sealed enclosures and a robust decoupling network of 100 nF + 4.7 uF near each supply pin. The BDM interface is essential for first-time calibration and in-field firmware updates. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes that supplement the NXP datasheet and typical application notes, including BDM connector wiring and EMC-compliant PCB layout for the QFP-80 package.

USD $11,90 Auf Lager