S9S12B128F0MFUE - 16-bit 128KB Flash Automotive MCU QFP-80 | NXP
Teilenummer: S9S12B128F0MFUE ✗ Abgekündigt| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $17.87 | $17,87 |
| 10 | $15.62 | $156,20 |
| 100 | $12.4 | $1.240,00 |
| 500 | $10.85 | $5.425,00 |
| 1.000 | $9.55 | $9.550,00 |
S9S12B128F0MFUE Übersicht
Background: A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (flash/ROM), data memory (RAM), and a rich set of peripherals (ADCs, timers, communication controllers). The HCS12 is NXP's 16-bit CISC architecture descended from the Freescale HC11/HC12 lineage, optimised for deterministic real-time control in cost-sensitive automotive and industrial designs. Within NXP's MCU hierarchy it sits between 8-bit S08 parts and 32-bit Power Architecture / S32K devices, making it a workhorse for body controllers, instrument clusters, lighting modules, and LIN/CAN nodes.
Key features include a 25MHz bus clock delivering 25 MIPS, an on-chip 8-channel 10-bit ADC for analogue sensing, an enhanced capture/timer (ECT) module supporting PWM and input capture, and BDLC, SPI, SCI, and CAN controllers for in-vehicle networking. The HCS12 core's single-cycle 16-bit instructions and indexed addressing improve code density versus 8-bit MCUs, while background debug mode (BDM) eases in-circuit development.
The S9S12B family is fully pin-compatible across memory and peripheral variants, allowing designers to scale (64KB / 128KB / 256KB) without changing the PCB. Built-in ECC on flash, a watchdog with dedicated oscillator, and low-voltage reset (LVR) support fail-safe automotive operation.
Typical applications include body control modules, HVAC flap controllers, instrument clusters, LIN/CAN slave nodes, seat and mirror controllers, lighting ECUs, and gateway bridges for distributed automotive networks. Compared with switching regulators or BLDC pre-drivers, this MCU is the supervisory brain of an automotive electronic control unit.
Design tip: Always enable the COP watchdog and the periodic interrupt timer (RTI) for the application, and route unused I/O to a defined state via the DDRx registers to avoid floating inputs in noisy automotive environments.
This page synthesises distributor pricing, pin-compatible S9S12 alternatives, and practical design notes beyond what is found on the NXP product page or in the manufacturer datasheet.
Drop-in-Alternativen für S9S12B128F0MFUE – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit S9S12B128F0MFUE (gleiche Bauform und Footprint) – abweichend in Package, Core, Operating Temperature Range, Program Memory Size, RoHS Status.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
MC9S12B128CFUE
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$14.85 / Stück
Datenblatt ansehen →MC9S12B128MFUE
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$10.4 / Stück
Datenblatt ansehen →MC9S12B128VFU
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
MC9S12B256CFUE
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
MC9S12B64CFUE
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$10.1 / Stück
Datenblatt ansehen →S9S12B128F0MFUE Grenzwerte & elektrische Eigenschaften
| Core Processor | HCS12 |
| Core Size | 16-bit |
| Maximum Clock Speed | 25 MHz |
| Program Memory Size | 128 KB (128K x 8) |
| Program Memory Type | FLASH |
| EEPROM Size | 1 KB (1K x 8) |
| Number of I/O | 59 |
| Data Converters | A/D 8x10b |
| Connectivity | CANbus, I2C, SCI, SPI |
| Peripherals | POR, PWM, WDT |
| Betriebstemperatur | -40C to +125C (Automotive Grade 1) |
| Gehäuse | 80-LQFP (14x14 mm) |
| Montageart | Surface Mount |
| AEC-Q100 Qualification | Qualified |
| Series | HCS12 / MC9S12B (S9S12B128, Sturgeon) |
| RoHS-Status | Compliant per NXP product page |
S9S12B128F0MFUE Pin-Konfiguration
| Pin 1 | VREF — ADC voltage reference |
| Pin 2 | VDDR — Regulated I/O supply output |
| Pin 3 | VDDX — External I/O supply input |
| Pin 4 | VSSX — I/O ground |
| Pin 5 | RESET — Active-low reset input |
| Pin 6 | BKGD — Background debug mode interface |
| Pin 7 | MODC — Mode control for BDM/normal operation |
| Pin 8 | RXCAN — CAN receive input |
| Pin 9 | TXCAN — CAN transmit output |
| Pin 10 | SS — SPI slave select (optional) |
| Pin 11 | MOSI — SPI master out / slave in |
| Pin 12 | MISO — SPI master in / slave out |
| Pin 13 | SCK — SPI clock |
| Pin 14 | TXD0 — SCI0 transmit |
| Pin 15 | RXD0 — SCI0 receive |
| Pin 16 | SDA — I2C data |
| Pin 17 | SCL — I2C clock |
| Pin 18 | PA0 — Port A bit 0 (general I/O) |
| Pin 19 | PA1 — Port A bit 1 (general I/O) |
| Pin 20 | PA2 — Port A bit 2 (general I/O) |
| Pin 21 | PA3 — Port A bit 3 (general I/O) |
| Pin 22 | PA4 — Port A bit 4 (general I/O) |
| Pin 23 | PA5 — Port A bit 5 (general I/O) |
| Pin 24 | PA6 — Port A bit 6 (general I/O) |
| Pin 25 | PA7 — Port A bit 7 (general I/O) |
| Pin 26 | PB0 — Port B bit 0 (general I/O) |
| Pin 27 | PB1 — Port B bit 1 (general I/O) |
| Pin 28 | PB2 — Port B bit 2 (general I/O) |
| Pin 29 | PB3 — Port B bit 3 (general I/O) |
| Pin 30 | PB4 — Port B bit 4 (general I/O) |
| Pin 31 | PB5 — Port B bit 5 (general I/O) |
| Pin 32 | PB6 — Port B bit 6 (general I/O) |
| Pin 33 | PB7 — Port B bit 7 (general I/O) |
| Pin 34 | PC0 — Port C bit 0 (general I/O) |
| Pin 35 | PC1 — Port C bit 1 (general I/O) |
| Pin 36 | PC2 — Port C bit 2 (general I/O) |
| Pin 37 | PC3 — Port C bit 3 (general I/O) |
| Pin 38 | PC4 — Port C bit 4 (general I/O) |
| Pin 39 | PC5 — Port C bit 5 (general I/O) |
| Pin 40 | PC6 — Port C bit 6 (general I/O) |
| Pin 41 | PC7 — Port C bit 7 (general I/O) |
| Pin 42 | PD0 — Port D bit 0 (general I/O) |
| Pin 43 | PD1 — Port D bit 1 (general I/O) |
| Pin 44 | PD2 — Port D bit 2 (general I/O) |
| Pin 45 | PD3 — Port D bit 3 (general I/O) |
| Pin 46 | PD4 — Port D bit 4 (general I/O) |
| Pin 47 | PD5 — Port D bit 5 (general I/O) |
| Pin 48 | PD6 — Port D bit 6 (general I/O) |
| Pin 49 | PD7 — Port D bit 7 (general I/O) |
| Pin 50 | PE0 — Port E bit 0 / interrupt |
| Pin 51 | PE1 — Port E bit 1 / interrupt |
| Pin 52 | PE2 — Port E bit 2 / interrupt |
| Pin 53 | PE3 — Port E bit 3 / interrupt |
| Pin 54 | PE4 — Port E bit 4 / interrupt |
| Pin 55 | PE5 — Port E bit 5 / interrupt |
| Pin 56 | PE6 — Port E bit 6 / interrupt |
| Pin 57 | PE7 — Port E bit 7 / interrupt |
| Pin 58 | PF0 — Port F bit 0 (general I/O) |
| Pin 59 | PF1 — Port F bit 1 (general I/O) |
| Pin 60 | PF2 — Port F bit 2 (general I/O) |
| Pin 61 | PF3 — Port F bit 3 (general I/O) |
| Pin 62 | PF4 — Port F bit 4 (general I/O) |
| Pin 63 | PF5 — Port F bit 5 (general I/O) |
| Pin 64 | PF6 — Port F bit 6 (general I/O) |
| Pin 65 | PF7 — Port F bit 7 (general I/O) |
| Pin 66 | VDD — Digital supply 5V |
| Pin 67 | VSS — Digital ground |
| Pin 68 | XIRQ — Non-maskable interrupt input |
| Pin 69 | IRQ — Maskable interrupt input |
| Pin 70 | EVDD — External I/O supply input (same as VDDX) |
| Pin 71 | EXTAL — Crystal/oscillator driver input |
| Pin 72 | XTAL — Crystal/oscillator driver output |
| Pin 73 | TEST — Test mode enable (must be tied to VSS in app) |
| Pin 74 | NC — Not connected (per datasheet) |
| Pin 75 | NC — Not connected (per datasheet) |
| Pin 76 | NC — Not connected (per datasheet) |
| Pin 77 | PWM0 — PWM channel 0 output |
| Pin 78 | PWM1 — PWM channel 1 output |
| Pin 79 | PWM2 — PWM channel 2 output |
| Pin 80 | PWM3 — PWM channel 3 output |
Typische Anwendungen
S9S12B128F0MFUE ist geeignet für 6 Anwendungs: Automotive Body Control Module (BCM), Instrument Cluster Controller, HVAC Flap and Blower Motor ECU, Seat and Mirror Control Module, Automotive Lighting ECU, CAN/LIN Gateway Bridge.
Automotive Body Control Module (BCM)
Why the S9S12B128F0MFUE fits BCM: The part delivers 128KB flash, an 8-channel 10-bit ADC, and 59 I/O lines capable of driving LED loads, switch reads, and motor relay controls typical of a BCM. Used as the supervisory processor of a centralised body controller placed inside the dashboard, it polls rocker switches, drives door lock actuators, and sequences turn signals while talking to the CAN network at up to 1 Mbps. Compared with newer ARM cores, the HCS12's deterministic interrupt latency and integrated CAN/SCI/SPI reduce BOM cost by eliminating an external transceiver in some configurations.
Empfohlen
Instrument Cluster Controller
Why the S9S12B128F0MFUE fits clusters: Its 25 MIPS throughput and ECT (Enhanced Capture Timer) module generate precise PWM dimming signals for backlight and gauge needles while executing CAN-driven gauge commands. With 4KB SRAM and 128KB flash the part hosts full gauge-sweep algorithms, message parsing, and self-test diagnostics. The AEC-Q100 Grade 1 qualification and -40C to +125C operation withstand under-dash thermal stress. Compared with an 8-bit S08, the HCS12's 16-bit datapath halves gauge-update latency.
Empfohlen
HVAC Flap and Blower Motor ECU
Why the S9S12B128F0MFUE fits HVAC: The PWM and ECT modules drive brushless blower control via complementary PWMs dead-band-corrected for FET switching, while the ADC reads cabin-temperature NTC sensors and potentiometer position of mode doors. The 59 I/O can decode multiplexed switch panels and illuminate status LEDs. With 1KB EEPROM the firmware retains user-setpoints over battery disconnect, which is mandatory for HVAC ECUs.
Empfohlen
Seat and Mirror Control Module
Why the S9S12B128F0MFUE fits seat controllers: The part's 128KB flash handles Bi-SoL fold/unfold state-machine code with EEPROM-backed position memory, and its CAN interface talks to the body controller as a slave node. Operated from -40C to +125C, the part survives door-mounted module environments with high humidity and temperature swings. Compared with discrete 8051 designs the S12B shrinks BOM and improves CAN reliability.
Empfohlen
Automotive Lighting ECU
Why the S9S12B128F0MFUE fits lighting: The PWM module dimms LED headlamps and tail-lamps with 8-bit resolution at 100Hz, accepting LIN/CAN commands from the BCM. With 4KB RAM it buffers day/night transition curves, while the 10-bit ADC reads LED-string current feedback via sense resistors. The AEC-Q100 +125C rating and high I/O count support matrix-style adaptive headlamp functions.
Empfohlen
CAN/LIN Gateway Bridge
Why the S9S12B128F0MFUE fits gateways: The mSCAN and SCI/SPI blocks translate between CAN HS-CAN and low-speed LIN sub-nets, with the 25MHz CPU sustaining 100% bus utilisation while translating identifiers. The 128KB flash can host a full CAN-LIN gateway OBD stack (KWP2000 or UDS) for diagnostic bridging. Compared with 32-bit gateways the S12B reduces cost for body sub-nets while retaining AEC-Q100 compliance.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für S9S12B128F0MFUE – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MC9S12B128CFUE | MC9S12B128MFUE | MC9S12B128VFU | MC9S12B256CFUE | MC9S12B64CFUE |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 80-LQFP (14x14) | 80-LQFP (14x14) - same | 80-LQFP (14x14) - same | 80-LQFP (14x14) - same | 80-LQFP (14x14) - same | 80-LQFP (14x14) - same |
| Flash Memory | 128 KB | 128 KB (same) | 128 KB (same) | 128 KB (same) | 256 KB (+100%) | 64 KB (-50%) |
| Core Speed | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 25 MHz |
| Number of I/O | 59 | 59 (same) | 59 (same) | 59 (same) | 59 (same) | 59 (same) |
| Connectivity | CAN, SCI, SPI, I2C | CAN, SCI, SPI, I2C | CAN, SCI, SPI, I2C | CAN, SCI, SPI, I2C | CAN, SCI, SPI, I2C | CAN, SCI, SPI, I2C |
| ADC | 8x 10-bit | 8x 10-bit | 8x 10-bit | 8x 10-bit | 8x 10-bit | 8x 10-bit |
| Operating Temperature | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C |
| AEC-Q100 Qualification | Yes | Yes (same) | Yes (same) | Yes (same) | Yes (same) | Yes (same) |
Wichtigste Unterscheidungsmerkmale
- Higher memory headroom than 64KB variant without pin-out change (vs. MC9S12B64CFUE)
- Lower cost and broader availability than 256KB variant (vs. MC9S12B256CFUE)
- Pin-compatible evolution to modern silicon revision (C-suffix) supported (vs. MC9S12B128CFUE)
Designhinweise
The S9S12B128F0MFUE must be powered by a regulated 5V supply with at least 50mA headroom; place a 0.1uF ceramic bypass close to each VDD pin and a bulk 10uF tantalum at the regulator output. The internal VDDR low-dropout regulator requires its own 2.2uF decoupling capacitor at the VDDR pin to keep the internal logic rail clean and prevent PLL jitter at 25MHz.
Always tie the TEST pin (pin 73) to VSS in application hardware; leaving TEST floating or driving it high can place the device in factory test mode and prevent normal boot-up. The MODC and BKGD pins should be brought out to a header for in-system debugging - do NOT load them with low-impedance circuits since this can disrupt BDM handshake and block flash programming.
Route the EXTAL/XTAL traces as short, symmetric, and guard-banded from switching signals; the crystal or ceramic resonator ground should reference a quiet ground island. With a 25MHz bus clock the HCS12 expects <50ppm crystal accuracy - cheaper ceramic resonators may fail CAN timing margins over -40C to +125C.
Estimated: at sustained 25MHz operation, MMIO toggling, and CAN transmit, junction temperature on a 4-layer FR4 board with 80-LQFP package typically stays below 70C ambient, but high-current I/O sinks (e.g. 10mA per pin across many pins) should be checked against the thermal resistance. Confirm with NXP thermal metrics in the family datasheet if loading exceeds 50 mA aggregate.
Compliance-Informationen
AEC-Q100 Grade 1 qualified per NXP datasheet (S9S12B family). RoHS/REACH compliant per NXP product page.
