Integrierte Schaltungen

PIC32MZ1024EFM100T-E/GJX

PIC32MZ1024EFM100T-E/GJX - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFM100T-E/GJX is a high-performance MIPS32 M-Class PIC32MZ 32-bit microcontroller running up to 200 MHz, integrating 1 MB (1M x 8) of Flash program memory and 512 KB of SRAM in a 100-pin TFBGA (7x7 mm) package. The device belongs to the PIC32MZ EF family and includes a single-precision hardware FPU, hardware crypto acceleration, USB 2.0 High-Speed OTG, 10/100Mbps Ethernet MAC, and dual CAN 2.0b controllers, all on-chip. The -E/GJX suffix designates the extended (-40C to +125C) operating temperature grade with 100-TFBGA package and tape-and-reel packaging. A 32-bit microcontroller (MCU) is a programmable processor that integrates CPU core, memory, and a rich set of peripherals into a single chip. Within the broader hierarchy, an MCU belongs to microcontrollers -> integrated circuits -> electronic components. The PIC32MZ EF family specifically targets connectivity-heavy applications such as industrial control, automotive infotainment, IoT gateways, HMI/graphics, and motor control where on-chip Ethernet, USB-HS, and CAN reduce BOM cost and PCB area. Key features include 1 MB Flash, 512 KB SRAM, MIPS32 M-Class core with FPU, 200 MHz operation, hardware crypto engine (AES, DES, SHA, RNG), 10/100 Ethernet MAC with RMII/MII interface, USB 2.0 High-Speed OTG with on-chip HS PHY, dual CAN 2.0b modules, SQI (Serial Quad Interface) for external Flash, and a 12-bit 18 MSPS ADC. The TFBGA-100 package supports low-pin-count designs while exposing 78 GPIO, 8 UART, 6 SPI, 5 I2C, and a parallel master port (PMP) for graphics. The architecture uses a 5-stage pipelined MIPS32 core with DSP extensions, separate instruction and data caches, tightly-coupled prefetch buffer, and a multi-layer AHB/APB bus matrix that delivers high peripheral throughput without CPU stalls. The crypto and connectivity accelerators offload Ethernet, USB, and AES/SHA workloads, making the device well-suited for secure connected nodes at industrial throughputs. Typical applications include industrial Ethernet IO modules, automotive CAN gateways with diagnostics, secure IoT edge nodes with TLS acceleration, USB-HS device/HMI controllers, and graphical HMI panels with resistive-touch sensing. Wide temperature range and AEC-Q100-grade process options support both factory-floor and cabin-mounted deployments. When designing with the PIC32MZ1024EFM100T-E/GJX, allocate sufficient PCB area for TFBGA fanout, follow Microchip's EMI/ESD layout guidelines for USB-HS and CAN, and provide a clean 3.3V rail with bulk decoupling near each supply pin. The integrated FPU and DSP extensions should be leveraged through MPLAB XC32 with -O2/-Ofast optimization to reach the 252 MHz core equivalent DMIPS throughput. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC32MZ EF family, and practical design notes not found in the manufacturer datasheet, giving engineers a single source for part selection, qualification, and sourcing.

Angebot Kontakt

PIC32MZ1024EFM100T-I/PF

PIC32MZ1024EFM100T-I/PF - 200MHz 1MB Flash MCU | Microchip

The Microchip Technology PIC32MZ1024EFM100T-I/PF is a 32-bit MIPS M-Class PIC32MZ microcontroller with integrated Floating Point Unit, running up to 200 MHz and delivering 330 DMIPS. The device integrates 1 MB of Flash program memory and 512 KB of SRAM, and is housed in a 100-pin TQFP package (14x14 mm). The "T" suffix denotes tape-and-reel packaging while the "I" indicates an industrial operating temperature range of -40C to +85C. An MCU (Microcontroller Unit) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals (ADCs, timers, communication interfaces). Microcontrollers sit inside the larger hierarchy of embedded computing devices -> microcontrollers -> 32-bit microcontrollers -> MIPS-based MCUs, and they are the central processing element for almost every connected embedded product. The PIC32MZ EF family targets connectivity-rich designs where large memory, USB-HS, Ethernet, and CAN interfaces are required. Key features of the PIC32MZ1024EFM100T-I/PF include a hardware crypto engine (AES, SHA, MD5, DES), a 200 MHz/330 DMIPS MIPS M-class core with DSP extensions, IEEE 754-compliant FPU, four 64-bit accumulators and single-cycle MAC with saturating and fractional math. The device exposes USB-HS (High Speed), Ethernet MAC, CAN, six UART/SPI/I2C modules, and a 12-bit 5 MSPS ADC with up to 48 channels. The 100-pin TQFP package supports parallel bus and extended peripherals via the EBIO/EBIH (External Bus Interface) pins. The architecture combines a high-performance pipeline, tightly-coupled instruction cache, and a dedicated crypto accelerator that offloads TLS/SSL handshakes and AES encryption without CPU intervention. The integrated 1 MB Flash with error-correcting code (ECC) and 512 KB SRAM enable complex protocol stacks (TCP/IP, USB-HS, graphics) to run on-chip without external memory. The 200 MHz core with DSP extensions makes the device equally suitable for motor-control DSP loops and HMI graphics rendering. Typical applications include industrial IoT gateways, automotive infotainment and connectivity, USB-HS peripherals, graphics/HMI controllers, secure-connected motor drives, and edge-AI sensor nodes. The wide peripheral mix and the integrated crypto engine are particularly compelling where TLS, secure boot, or field firmware updates are mandatory. When designing with this part, place a 10 uF plus 0.1 uF decoupling pair near every VDD/VSS pin group, route the 200 MHz-related clocks on the inner PCB layer with a continuous ground reference, and consult the family reference manual section on system-on-chip integration for clock-switching and power-mode entry. Designers migrating from PIC32MX should pay attention to the higher I/O count and 3.3 V tolerance differences. This page synthesizes distributor pricing (DigiKey, Mouser, LCSC), validated drop-in alternatives from Microchip's PIC32MZ EF family, and practical design notes that go beyond the manufacturer's datasheet - information an engineer can act on immediately.

Angebot Kontakt

PIC32MZ1024EFM100T-I/PT

PIC32MZ1024EFM100T-I/PT - 200MHz 1MB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MZ1024EFM100T-I/PT is a high-performance 32-bit MIPS M-Class microcontroller running up to 200 MHz with 330 DMIPS performance, integrating 1 MB of Flash program memory and 512 KB of SRAM in a 100-pin TQFP (12x12 mm) package. The part features a MIPS32 microAptiv core with an FPU, DSP extensions (four 64-bit accumulators, single-cycle MAC), and dedicated Crypto acceleration for AES, DES, 3DES, SHA-1, SHA-256 and RSA algorithms. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, RAM, non-volatile program memory (Flash), and a rich set of on-chip peripherals such as timers, ADC, communication controllers, and GPIOs. Within the broader semiconductor taxonomy, this PIC32 part belongs to the high-performance MIPS-based 32-bit MCU family, which sits above 8-bit/16-bit microcontrollers in capability and below application processors in software complexity. PIC32MZ EF devices target connectivity-rich embedded applications. Key features of the PIC32MZ1024EFM100T-I/PT include a 12-bit 18 MSPS ADC with up to 48 analog channels, two CAN 2.0b modules, 10/100 Mbps Ethernet MAC with MII/RMII, USB 2.0 High-Speed OTG, six UART, three SPI, four I2C, a parallel master port (PMP) for graphics, and a 9-layer AHB bus matrix for high-throughput DMA. The wide operating voltage of 2.1 V to 3.6 V and industrial -40C to +85C temperature range suit harsh industrial and IoT deployments. Architecturally, the device combines a deterministic MIPS32 core with an integrated Crypto engine and a high-bandwidth bus fabric, allowing encrypted communication, secure boot, and parallel graphics display without external co-processors. The embedded FPU and DSP extensions accelerate signal-processing algorithms for motor control, audio codecs, and DSP front-ends. Typical applications include industrial control and HMI, IoT gateways with secure Ethernet/USB connectivity, automotive aftermarket infotainment, motor control (BLDC/PMSM), and graphical user interfaces via PMP or SPI displays. The on-chip crypto engine makes the part particularly attractive for secure connected nodes. For designs that require a wider temperature range or larger Flash, consider the PIC32MZ1024EFM100T-E/PT (-40C to +125C) or the 2 MB Flash EFK variant. Crypto features are mandatory for TLS/DTLS offload and secure firmware update pipelines. This page synthesizes distributor stock, real-time pricing, drop-in alternative MPNs, and practical design notes not found in the manufacturer datasheet, so engineers can evaluate supply and second-source options in one place.

Angebot Kontakt

PIC32MZ1024EFM124-E/TL

PIC32MZ1024EFM124-E/TL - 180MHz 1MB Flash MCU | Microchip

The Microchip Technology PIC32MZ1024EFM124-E/TL is a 32-bit MIPS32 M-Class microcontroller running up to 180 MHz with 1 MB of Flash and 512 KB of SRAM, housed in a 124-pin VTLA (9x9 mm) package. It belongs to the PIC32MZ EF family, which targets high-performance connectivity applications including industrial automation, automotive, IoT, graphics/HMI, and motor control. The part integrates a hardware crypto accelerator, multiple ADC and DAC channels, DMA, PWM, and 97 I/O lines for rich peripheral integration. A 32-bit microcontroller (MCU) is a microprocessor with integrated Flash, RAM, peripherals, and interrupt controllers on a single die, providing a self-contained compute platform for embedded systems. The PIC32MZ EF family sits at the top of the PIC32 performance hierarchy (PIC32MX -> PIC32MZ EC -> PIC32MZ EF -> PIC32MZ W1) and combines a MIPS32 M-Class core with dedicated DSP instructions and a Floating Point Unit (FPU) for signal-processing workloads. Key specifications include 252 MHz maximum core clock (datasheet headroom), 180 MHz typical operation in this part, 1 MB program Flash, 512 KB SRAM, 4 KB EEPROM emulation, a 12-bit 5 MSPS ADC, and USB 2.0 High-Speed with on-chip PHY. The crypto engine supports AES, DES, 3DES, SHA-1, SHA-256, MD5, and HMAC for secure connectivity designs, while the integrated FPU accelerates floating-point math used in motor control and DSP loops. Architecturally, the PIC32MZ EF uses a five-stage pipeline MIPS32 M-Class core with separate I-cache and D-cache, dual-panel Flash for live update, and a Peripheral Pin Select (PPS) system that lets most digital peripherals be remapped to any of the 97 I/O pins. The 124-VTLA package is a thin-profile land-grid-array that maximizes pin density while keeping the board footprint at 9x9 mm. Typical applications include industrial Ethernet gateways, automotive body and HMI controllers, IoT edge nodes with TLS, motor-control FOC drives, and graphical touch-screen HMI panels. The combination of hardware crypto and high-speed USB simplifies connected-product designs where software cryptography would saturate the CPU. When designing with this device, plan the 124-VTLA PCB land pattern early; the 0.5 mm pitch requires fine-line PCB fabrication and via-in-pad is recommended for the central thermal/exposed pad. Decoupling follows the datasheet's recommended 100 nF per supply pin plus bulk capacitors on each power rail. This page synthesizes distributor pricing, verified drop-in alternatives from the PIC32MZ EF family, and practical PCB/decoupling notes not found in the manufacturer datasheet.

Angebot Kontakt

PIC32MZ1024EFM124-I/TL

PIC32MZ1024EFM124-I/TL - 200MHz 32-bit MCU, 1MB Flash, 124-VTLA | Microchip

The Microchip Technology PIC32MZ1024EFM124-I/TL is a high-performance 32-bit microcontroller based on the MIPS32 M-Class core running up to 200 MHz, integrating 1 MB of Flash program memory and 512 KB of SRAM, and packaged in a 124-pin VTLA (9x9 mm) thermally-enhanced laminate package. A 32-bit MCU (microcontroller unit) is an integrated circuit that combines a processor core, program memory, data memory, and a rich set of programmable peripherals on a single die. The PIC32MZ EF family targets connectivity applications across industrial, IoT, graphics/HMI, and motor-control segments, with the M-class MIPS core providing deterministic real-time performance, 252 MHz peak operation, hardware multiply-accumulate, and DSP extensions for signal-processing workloads. Key features include 1 MB of Flash with ECC, 512 KB of SRAM, a 12-bit 18 MSPS ADC, USB 2.0 high-speed PHY, two CAN 2.0B controllers, Ethernet MAC with RMII/MII interfaces, multiple SPI/I2C/UART peripherals, and a 4-lane 16-bit parallel master port for graphics. The integrated FPU speeds floating-point math, while the crypto engine (in selected variants) accelerates AES/SHA operations. Architecturally, the device combines the MIPS microAptiv core with a 5-stage pipeline, dual-bank Flash for live updates, and an extensive peripheral set mapped through Microchip's Harmony peripheral library. The 124-VTLA package exposes the full peripheral count and provides an exposed thermal pad for improved heat dissipation at 200 MHz operation. Typical applications include industrial automation controllers, automotive infotainment/HMI, IoT edge gateways with Ethernet, motor control FOCs, and graphical touch-screen interfaces. The PIC32MZ EF family supports the MPLAB Harmony 3 framework for rapid firmware development. When designing, ensure the 124-VTLA pad layout includes thermal vias under the exposed pad and that decoupling capacitors are placed within 3 mm of each supply pin. Programming and debugging use the standard 4-wire ICSP interface with PGECx/PGEDx pin pairs. This page synthesizes distributor pricing, drop-in alternatives within the PIC32MZ EF family, application guidance, and practical design notes not consolidated in any single manufacturer or distributor page.

Angebot Kontakt

PIC32MZ1024EFM144-E/JWX

PIC32MZ1024EFM144-E/JWX - 32-bit 180MHz MCU, 1MB Flash, Crypto | Microchip

The Microchip Technology PIC32MZ1024EFM144-E/JWX is a 32-bit MIPS32 M-Class PIC microcontroller running up to 180 MHz, integrating 1 MB of Flash and 512 KB of SRAM in a 144-pin TFBGA (7x7 mm) package. It is part of the PIC32MZ EF family, which targets connectivity, industrial, IoT, graphics/HMI, and motor-control applications with on-chip crypto acceleration, CAN, and Ethernet. What is a PIC32 microcontroller? A PIC32 is a 32-bit MIPS-based microcontroller from Microchip Technology that combines the simplicity of the PIC architecture with higher computational throughput. Within Microchip's portfolio the PIC32MZ EF family sits above the PIC32MX series and offers higher core speeds, larger memory, dedicated crypto engines, and richer connectivity peripherals. The PIC32 part-number string encodes family (MZ), memory density (1024 KB Flash), family sub-variant (EFM = EF with crypto and motor-control peripherals), pin count (144), temperature range (E = -40C to +125C), and package (JWX = 144-TFBGA). The PIC32MZ1024EFM144-E/JWX features a 32-bit MIPS32 M-Class core with hardware multiply/divide, a floating-point unit, an integrated crypto engine (AES, SHA, RNG), dual CAN modules, 10/100 Ethernet MAC with MII/RMII interfaces, USB 2.0 high-speed OTG, and up to 120 general-purpose I/O pins. It includes a 12-bit ADC at 18 MSPS, analog comparators, multiple PWM channels for motor control, and an on-chip DDR2 ready external memory bus. The device operates from 2.3V to 3.6V and is AEC-Q100 qualified for automotive applications. The 144-TFBGA package at 7x7 mm supports compact PCB layouts for space-constrained designs. An integrated FPU simplifies code development for graphics and signal-processing tasks, while the crypto accelerator offloads AES/SHA from the CPU, leaving more MIPS for application logic. Typical applications include industrial IoT gateways, automotive body and connectivity modules, HMI/graphics controllers, motor-control inverters, and secure connected devices. The combination of Ethernet, USB, CAN, and crypto makes it a strong choice for protocol-converter and secure-communication designs. When designing with this part, allocate a solid ground plane under the TFBGA and follow Microchip's recommended BGA land pattern with via-in-pad for clean power delivery. Use the supplied MPLAB Harmony code framework to initialize peripherals, and validate thermal performance in enclosed enclosures. This page synthesizes Microchip's PIC32MZ EF datasheet information, distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Angebot Kontakt

PIC32MZ1024EFM144-E/PH

PIC32MZ1024EFM144-E/PH - 32-Bit 200MHz MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFM144-E/PH is a 32-bit PIC32MZ EF microcontroller with a MIPS32 M-Class core running at 200 MHz, 1 MB of Flash program memory, 512 KB of SRAM, and an integrated IEEE 754-compliant floating point unit, housed in a 144-pin TQFP (16x16 mm) package. It is an extended-temperature (-40C to +125C) device with USB High-Speed, 10/100 Ethernet MAC, CAN, and a hardware crypto engine. A microcontroller (MCU) is a self-contained computer on a single chip that integrates a processor core, program memory (Flash), data memory (SRAM), and peripheral interfaces. The PIC32MZ EF family sits in the 32-bit MCU class, above 8-bit and 16-bit MCUs, and below application processors such as the PIC32MZ DA with integrated graphics. Within the Microchip hierarchy it belongs to the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, which targets connectivity, industrial, IoT, graphics/HMI, and motor-control applications. Key features include 200 MHz operation (330 DMIPS), dual-panel Flash for live-update support, a DSP-enhanced core with four 64-bit accumulators and single-cycle MAC, and a full peripheral set: USB 2.0 High-Speed with on-chip PHY, 10/100 Ethernet MAC, CAN 2.0B, multiple UART/SPI/I2C, 12-bit ADC, and a random number generator with crypto acceleration. The 144-pin TQFP package exposes the maximum I/O count of the family, making it the choice when the application needs the widest peripheral fan-out. Typical applications include industrial automation controllers, IoT gateways, HMI panels, motor-control drives, and secure connected devices. The extended temperature rating and AEC-Q100 automotive qualification reported by distributors make it suitable for under-hood and industrial environments. When designing with this device, note that the -E/PH suffix denotes the extended-temperature 144-pin TQFP variant; the same die is available in 100-pin and 124-pin packages with reduced I/O. Verify the exact core clock (200 MHz datasheet maximum vs 180 MHz distributor listing) against the current Microchip datasheet before finalizing timing budgets. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for selection, replacement, and layout decisions.

Angebot Kontakt

PIC32MZ1024EFM144-E/PL

PIC32MZ1024EFM144-E/PL - 200MHz 32-Bit MCU 1MB Flash 144-LQFP | Microchip

The Microchip Technology PIC32MZ1024EFM144-E/PL is a high-performance 32-bit MIPS32 M-Class microcontroller running at up to 200 MHz (252 MHz for select EF family members), integrating 1 MB of Flash and 512 KB of SRAM in a 144-pin LQFP (20x20 mm) package with an exposed pad. It features the MIPS Warrior M-class core with DSP extensions, four 64-bit accumulators, single-cycle MAC, saturating and fractional math, and an IEEE 754-compliant hardware Floating Point Unit, delivering up to 330 DMIPS of computational throughput. The device includes an integrated Crypto engine for hardware-accelerated AES, DES, 3DES, SHA, MD5, and HMAC operations, dual-panel Flash for live firmware update support, and a 2 MB Flash ceiling within the family. A microcontroller (MCU) is a single-chip computer that integrates a processor core, non-volatile program memory, working RAM, and a rich set of on-chip peripherals. The PIC32MZ EF family extends this concept with high-speed connectivity peripherals (USB 2.0 High-Speed with PHY, dual Ethernet MAC with 1588 PTP, dual CAN-FD) and a wide peripheral mix (12-bit ADC at up to 18 MSPS, comparators, timers, PMP, EBI), positioning it at the top tier of industrial connectivity MCUs. From a system-hierarchy viewpoint, an MCU belongs to the broader family of embedded processors alongside microprocessors, DSPs, and SoCs. Key features of the PIC32MZ1024EFM144-E/PL include: 1 MB (1024 KB) Flash organized as dual-panel, 512 KB SRAM, integrated Crypto accelerator, Hi-Speed USB 2.0 with on-chip PHY, dual 10/100 Ethernet MACs with IEEE 1588 PTP, dual CAN 2.0B with CAN-FD support, up to 120 MHz peripheral bus, and a 144-pin LQFP package operating across the -40C to +125C extended industrial range (E suffix). The 200 MHz core delivers up to 3.13 CoreMark/MHz efficiency with the FPU. Typical applications include industrial automation gateways, automotive infotainment and HMI, Ethernet-connected IoT edge nodes, secure motor-control controllers, and graphics HMI panels. The integrated Crypto engine offloads TLS/DTLS handshake acceleration in connected appliances, while the dual Ethernet MACs support redundant industrial ring topologies. The dual-panel Flash enables A/B OTA-style firmware updates with rollback safety. When designing with this MCU, allocate the Vcap pins with low-ESR 4.7 uF ceramic capacitors as specified in Section 2 of the datasheet, place a ferrite bead on VDDCORE if using a switched-core supply, and respect the 5V-tolerant I/O mapping for the shaded pins in the pinout table. Boot time from POR is typically <2 ms; for deterministic startup use the BOR + RTCC combinations described in the family reference manual. This page synthesizes distributor pricing and stock data, drop-in replacement options drawn from the same PIC32MZ EF family, and application-specific design notes not consolidated on the manufacturer product page.

Angebot Kontakt

PIC32MZ1024EFM144-I/JWX

PIC32MZ1024EFM144-I/JWX - 200MHz MIPS MCU 1MB Flash 144-TFBGA | Microchip

The Microchip PIC32MZ1024EFM144-I/JWX is a 32-bit MIPS MCU in the popular PIC32MZ EF family offering 200 MHz CPU core, 1 MB Flash, 512 KB RAM, and integrated Crypto engine and CAN FD. It ships in a 144-pin TFBGA package measuring 7x7 mm and is targeted at industrial, IoT, graphics/HMI, and motor-control designs. A 32-bit microcontroller is a programmable embedded processor with on-chip memory and peripherals, sitting between low-end 8/16-bit MCUs and application processors in the embedded computing hierarchy. Microcontroller -> 32-bit MCU -> MIPS32 M-Class MCU -> PIC32 family -> PIC32MZ EF family. These parts typically integrate flash program memory, SRAM, timers, ADC, communication peripherals (UART, SPI, I2C, CAN, USB, Ethernet), and security/crypto accelerators to deliver a complete SoC for connected embedded systems. Key features of the PIC32MZ1024EFM144-I/JWX include a MIPS32 M-Class core with DSP/FPU extensions, 200 MHz maximum operating frequency, 1 MB dual-panel Flash (live update capable), 512 KB SRAM, hardware crypto engine (AES/SHA/RNG), dual CAN FD, USB 2.0 Hi-Speed, 10/100 Ethernet MAC with MII/RMII, 12-bit ADC, and integrated FPU for floating-point math. The 144-TFBGA package supports the highest pin count in the family, exposing parallel bus, trace, and abundant GPIO for HMI graphics. This MCU is built on a 65 nm embedded flash process and integrates ample analog peripherals including multiple 12-bit ADC modules, comparators, and a temperature sensor. The 200 MHz core achieves 3.84 CoreMark/MHz, and dedicated DSP extensions accelerate signal processing loops used in audio, motor control, and sensor fusion. Typical applications include industrial HMI panels, IoT gateways with secure cloud connectivity, automotive body and infotainment subsystems, motor-control FOC drives, and medical instrumentation with graphical user interface. The integrated crypto engine plus CAN FD make it well suited for connected industrial nodes requiring TLS/DTLS acceleration and robust in-vehicle networking. Designers should note that the I-grade variant operates from -40C to +85C and requires a 3.3 V supply. BGA routing demands HDI PCB with microvia stackups; reference the PIC32MZ EF Family data sheet for trace pin assignments and MII/RMII PHY connection diagrams. This page combines distributor pricing, drop-in same-family alternatives, and BGA layout design notes not found in the manufacturer summary page.

Angebot Kontakt

PIC32MZ1024EFM144-I/PL

PIC32MZ1024EFM144-I/PL - 200MHz 1MB Flash MCU w/ FPU | Microchip

The Microchip Technology PIC32MZ1024EFM144-I/PL is a high-performance 32-bit MIPS microcontroller from the PIC32MZ EF family, featuring a MIPS Warrior M-class core running up to 200 MHz with 330 DMIPS, an integrated IEEE 754-compliant single-precision Floating Point Unit (FPU), and DSP-enhanced instructions including four 64-bit accumulators and single-cycle MAC. The device integrates 1 MB (1024 KB) of dual-panel Flash with live-update support and 512 KB of SRAM, and it is housed in a 144-pin LQFP package (20x20 mm) with extensive peripherals including USB-HS, Ethernet, CAN, multiple UART/SPI/I2C interfaces, and crypto acceleration hardware. A 32-bit microcontroller (MCU) is a microprocessor with on-chip Flash program memory, RAM, peripherals, and interrupt controllers integrated into a single IC. Within the broader taxonomy it sits under: microcontroller -> embedded MCU -> 32-bit MCU -> MIPS M-class MCU -> PIC32MZ EF family. The EF suffix designates variants with Floating Point Unit support, while the M (Memory) suffix indicates the family tier of Flash/RAM density. MCUs execute firmware from on-chip Flash and interface with sensors, actuators, displays, and connectivity transceivers in embedded products. Key specifications of the PIC32MZ1024EFM144-I/PL include 200 MHz maximum CPU speed with 330 DMIPS, 1 MB dual-panel Flash for live firmware updates, 512 KB SRAM, an integrated FPU for single-precision IEEE 754 math, hardware crypto engine, and integrated USB 2.0 High-Speed OTG plus 10/100 Ethernet MAC. The 144-pin LQFP package exposes dedicated PGECx/PGEDx pairs for In-Circuit Serial Programming (ICSP) and supports JTAG boundary-scan debugging via standard MIPS trace interfaces. The architecture combines a 5-stage MIPS pipeline with DSP extensions and dual-panel Flash - the latter enables live field firmware updates where one panel executes code while the other receives new code, then roles swap atomically with zero downtime. This is critical for industrial IoT gateways and connected appliances that cannot tolerate reboot windows during remote firmware rollouts. Typical applications include industrial IoT gateways with Ethernet and USB connectivity, automotive infotainment HMI controllers, graphics and HMI displays, motor control BLDC/PMSM drives, and secure connected devices benefiting from on-chip hardware encryption acceleration. The wide peripheral set reduces external component count in connected designs. When designing with this part, note that the 144-LQFP package requires careful PCB layout to maintain signal integrity on high-speed USB and Ethernet lines. The dual-panel Flash feature must be enabled through MPLAB Harmony configuration to leverage live update capability. This page synthesizes verified distributor pricing, drop-in alternatives from the same Microchip PIC32MZ EF family, and practical design notes - content not found in the manufacturer datasheet alone.

Angebot Kontakt

PIC32MZ1024EFM144T-E/JWX

PIC32MZ1024EFM144T-E/JWX - 180MHz 1MB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MZ1024EFM144T-E/JWX is a high-performance MIPS32 M-Class PIC32MZ microcontroller built around a 32-bit core running up to 180 MHz, integrating 1 MB of Flash and 512 KB of SRAM in a 144-pin TFBGA (7x7) package with 0.5 mm terminal pitch. The PIC32MZ EF family is engineered for connectivity-rich embedded designs and combines a Crypto engine, CAN, USB, and a rich peripheral set on a single die, targeting industrial, automotive, IoT, graphics/HMI, and motor-control end-markets. What is a PIC32MZ microcontroller? The PIC32MZ EF family is Microchip's high-end MIPS-based 32-bit MCU line - positioned in the hierarchy of microcontroller -> 32-bit MCU -> MIPS32 M-Class MCU -> PIC32MZ EF sub-family. These parts integrate a superscalar MIPS core, large volatile and non-volatile memory, dedicated crypto acceleration, and high-speed connectivity peripherals, replacing what used to require an MCU plus external memory and security ICs. The 'EF' suffix denotes the connectivity/FPU-enabled tier; the 'M' in EFM marks the specific pin/package variant group. Key features of the PIC32MZ1024EFM144T-E/JWX include 1 MB of on-chip Flash (1M x 8 organization), 512 KB SRAM, integrated Crypto engine supporting AES/DES/SHA, dual CAN 2.0b modules, USB 2.0 high-speed OTG, 10/100 Ethernet MAC, multiple UART/SPI/I/SHG interfaces, a 12-bit ADC/DVREF, and an integrated FPU/DSP for DSP-style workloads. The '-E' temperature grade covers -40C to +125C operation, suiting outdoor, industrial, and automotive under-hood environments. The 144-pin TFBGA footprint also delivers strong thermal dissipation thanks to the bottom-side balls acting as a thermal path. Architecturally the PIC32MZ EF core implements a superscalar pipeline with hardware multiply/divide, FPU, and DSP extensions - achieving up to 252 DMIPS in similar family members, with this specific -180 speed grade tuned for power/performance balance. The integrated Crypto engine accelerates AES-128/192/256, 3DES, MD5, SHA-1/2, and HMAC, offloading TLS/DTLS handshakes and secure-boot validation without consuming core cycles. Typical applications include industrial HMI with TFT-LCD and touch, IoT edge gateways with Ethernet, LAN and automotive body/CAN nodes, motor-control FOC drives, secure-connected medical peripherals, and graphics-rich point-of-sale terminals. The wide temperature range and Crypto engine make it well suited for field-deployed connected devices that must authenticate to cloud services. Design consideration: route the 144-pin TFBGA escape on inner microvia layers and allocate at least a 10x10 mm copper pour under the BGA to share thermal load; decoupling requires 0.1µF + 4.7µF ceramics within 3 mm of every VDD/VDDPLL pair. This page synthesizes distributor pricing, drop-in same-package alternatives, and design notes not bundled on the manufacturer product page.

Angebot Kontakt

PIC32MZ1024EFM144T-I/JWX

PIC32MZ1024EFM144T-I/JWX - 200MHz 1MB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MZ1024EFM144T-I/JWX is a high-performance 32-bit MIPS32 M-Class microcontroller running at 200 MHz, with 1 MB of Flash memory and 512 KB of SRAM in a 144-pin TFBGA (JWX) package measuring 7x7 mm. This PIC32MZ EF family part delivers up to 252 MHz (with speed grade variants) and integrates a Floating Point Unit (FPU) plus crypto accelerators, targeting connectivity, industrial, automotive, IoT, graphics/HMI, and motor control applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and peripherals. The PIC32MZ EF family belongs to the 32-bit MCU hierarchy, which sits above 16-bit MCUs and below 64-bit application processors in embedded computing taxonomy. Within Microchip's portfolio, the PIC32MZ EF line provides the highest performance among PIC32 microcontrollers, bridging the gap between traditional 8/16-bit PIC MCUs and full Linux-capable MPU processors. Key features of this part include: 1 MB (1M x 8) Flash program memory, 512 KB SRAM, hardware crypto engine for AES/SHA, integrated FPU for IEEE 754 single/double precision math, and rich connectivity peripherals including CAN, USB, Ethernet, multiple SPI/I2C/UART interfaces, plus a 12-bit ADC and analog comparators. The 144-pin TFBGA package supports up to 120 GPIO pins, enabling complex designs. The device uses a 5-stage MIPS32 M-Class pipeline with DSP extensions, achieving 3.28 CoreMark/MHz performance. Hardware crypto acceleration offloads AES-128/192/256, SHA-1/2, and true random number generation, allowing secure communication without CPU overhead. The integrated FPU handles floating-point math natively for HMI graphics rendering and motor control algorithms. Typical applications include: industrial control HMI with TFT LCD graphics, IoT edge gateways with Ethernet and USB, automotive body controllers with CAN bus, motor control drives (BLDC/PMSM) using FPU for field-oriented control, and secure connected sensors requiring hardware crypto. The PIC32MZ EF family's rich peripheral set makes it suitable for both standalone applications and as a companion processor. When designing with this MCU, plan memory layout carefully - 1 MB Flash is shared between code, data Flash, and EEPROM emulation. Use Microchip's Harmony 3 framework and MPLAB-X IDE for software development. The 144-pin TFBGA requires careful PCB layout with microvia technology due to the 0.5 mm pitch. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, providing engineers with a consolidated reference for component selection and sourcing decisions.

Angebot Kontakt

PIC32MZ1024EFM144T-I/PH

PIC32MZ1024EFM144T-I/PH - 32-bit 200MHz MCU 1MB Flash | Microchip

The Microchip PIC32MZ1024EFM144T-I/PH is a high-performance 32-bit MIPS32 M-Class microcontroller running up to 200 MHz, integrating 1 MB of Flash and 512 KB of SRAM into a 144-pin TQFP (16x16 mm) industrial-temperature package. Built on the PIC32MZ EF family architecture, this Crypto-enabled variant adds hardware acceleration for AES, DES, 3DES, MD5, SHA-1, SHA-2, and HMAC, offloading cryptographic workloads from the CPU and shortening time-to-market for secure-connected designs. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a 32-bit CPU core, program and data memory, and a rich peripheral set around a shared system bus. PIC32 microcontrollers sit within the broader hierarchy: microcontroller -> embedded MCU -> 32-bit MCU -> MIPS-based MCU -> industrial / IoT / connected device silicon. The PIC32MZ EF family targets connectivity applications including industrial automation, automotive infotainment, IoT gateways, HMI/graphics, and motor control, sitting at the top of the Microchip 32-bit PIC portfolio alongside the PIC32MX and PIC32MM series. Key differentiating specifications include: a MIPS32 M-Class core with DSP instructions and double-precision FPU for signal-processing workloads; up to 200 MHz CPU clock with 16 KB I-cache and 16 KB D-cache for deterministic execution; high-speed USB 2.0 full-speed OTG plus 10/100 Ethernet MAC for connected designs; and a 12-bit ADC reaching 500 ksps for instrumentation-grade sensing. The integrated crypto engine accelerates AES (128/192/256-bit), SHA-1/2, and HMAC in hardware, enabling TLS-style secure boot and over-the-air update flows without taxing the CPU. Typical applications include industrial PLC I/O modules, EtherCAT/CAN-connected motor drives, IoT edge gateways with secure TLS endpoints, automotive infotainment HMI panels, and graphics-enabled HMI controllers. The 144-TQFP package exposes a wide peripheral count (six UART, four SPI, five I2C, CAN, EBI, PMP) so designers rarely need an external bus expander. When designing with this part, pay close attention to decoupling: place 100 nF X7R capacitors within 2 mm of every VDD/VSS pair, and bulk-decouple VDD with 4.7 uF plus 1 uF X5R ceramics. Trace the high-speed USB differential pair as a 90 ohm differential microstrip on the top layer over a continuous ground reference, and keep the 50 MHz crystal traces short and symmetric to meet USB jitter specifications.

Angebot Kontakt

PIC32MZ1025DAA169-I/HF

PIC32MZ1025DAA169-I/HF - 200MHz 1MB Flash 32-bit MCU | Microchip

The Microchip PIC32MZ1025DAA169-I/HF is a 200 MHz 32-bit MIPS microAptiv microcontroller from the PIC32MZ DA Graphics Family, integrating 1 MB of Flash, 256 KB SRAM, an integrated Graphics Controller with 2D GPU, and 169-pin LFBGA (11x11 mm) packaging. It is part of the secure MCU family designed for cost-sensitive graphical user interface applications, with secure boot and encrypted Flash options. The device operates from 2.3 V to 3.6 V and supports an extended industrial temperature range of -40 °C to +85 °C. A 32-bit microcontroller (MCU) is a microprocessor integrated with Flash program memory, SRAM data memory, and a rich peripheral set on a single die. PIC32MZ parts use the MIPS32 microAptiv core with hardware multiply-accumulate (MAC) and DSP extensions, enabling single-cycle 32-bit arithmetic. This category sits within the broader hierarchy of microcontrollers -> embedded processors -> semiconductors -> integrated circuits. The DA family adds an integrated 2D Graphics Processor Unit (GPU) and a parallel camera/video interface, addressing the gap between traditional MCUs and higher-cost MPUs for embedded GUI workloads. Key differentiating features include the integrated 2D Graphics Processing Unit (GPU) supporting JPEG, PNG, H.264 decode, and the 32 MB or 128 MB DDR2 DRAM controller (external). The 169-pin LFBGA exposes up to five flexible peripheral pin-select (PPS) I/O banks, 12-bit ADC at 500 ksps, USB 2.0 high-speed OTG, two CAN 2.0b controllers, and 10/100 Ethernet MAC with IEEE 1588 PTP. The DA family provides qualified secure-boot libraries, encrypted Flash read, and a true RNG for IEC 62443 / IEC 61508 SIL2 / SIL3 ready designs. Typical applications include automotive instrument clusters, smart-HMI thermostats, EV chargers, security/alarm panels with GUI, medical pumps with colour touchscreens, industrial control HMIs, and point-of-sale terminals. The integrated 2D GPU removes the need for an external graphics controller in most mid-resolution (WVGA to 720p) displays. Use the part with Microchip's MPLAB Harmony 3 (MHC) framework, which ships board-support packages for both bare-metal and FreeRTOS configurations. Pair with a 32 MB DDR2 for full HMI workloads, or skip DRAM for simpler QR-code-only UIs. Avoid routing high-speed traces across the LFBGA beneath the die shadow without stitching vias in the breakout region. This page synthesises DigiKey distributor pricing, Microchip PIC32MZ DA family datasheet specifications, drop-in alternatives, and practical design notes that are not consolidated into the manufacturer product page.

Angebot Kontakt

PIC32MZ1025DAA176T-I/2J

PIC32MZ1025DAA176T-I/2J - 200MHz 1MB Flash 32-bit MCU | Microchip

The Microchip PIC32MZ1025DAA176T-I/2J is a high-performance 32-bit MIPS32 microAptiv microcontroller from the PIC32MZ DA family, featuring a 200 MHz core, 1 MB Flash, and integrated Graphics Controller for GUI-driven embedded designs. It is housed in a 176-pin LQFP (20x20 mm) package with an exposed thermal pad, supporting the PIC32MZ DA family's signature combination of MCU ease-of-design with MPU-class peripherals. Key features include 1 MB of on-chip Flash, 256 KB SRAM (with options for external DDR2 DRAM expansion on related DA family members), integrated Graphics Processing Unit (GPU), integrated Graphics Controller for direct LCD driving, USB 2.0 High-Speed with on-chip PHY, dual CAN 2.0b interfaces, and a 12-bit 18 MSPS ADC with up to 45 analog inputs. The 200 MHz MIPS32 microAptiv core delivers up to 252 DMIPS, while rich connectivity options include Ethernet, SQI, SPI, I2C, and UART. A PIC32MZ DA microcontroller is a member of the broader 32-bit MCU category, sitting at the high-performance end of the PIC32 family. It is engineered for applications that demand both substantial computational headroom and rich peripheral integration without moving to a discrete MPU. Within the embedded hierarchy, a PIC32MZ DA device is best understood as: 32-bit microcontroller -> PIC32 family -> PIC32MZ DA sub-family -> graphics-oriented MPU-like MCU. Typical applications include industrial HMI panels, automotive dashboards, medical patient-monitoring displays, home appliances with graphical user interfaces, and building-automation control panels. The combination of integrated display-driving, USB High-Speed, and CAN makes the part especially well-suited to systems that must simultaneously drive a TFT LCD and communicate with industrial or vehicle networks. When designing with the PIC32MZ1025DAA176T-I/2J, follow Microchip's recommended decoupling scheme (typically 0.1 uF + bulk capacitors placed close to each power pin) and ensure adequate PCB copper for the exposed thermal pad to dissipate up to ~1 W of internal dissipation under heavy CPU/GPU load.

Angebot Kontakt

PIC32MZ1025DAB169-I/HF

PIC32MZ1025DAB169-I/HF - 200MHz 32-bit MCU | Microchip

The Microchip Technology PIC32MZ1025DAB169-I/HF is a 32-bit MIPS32 microAptiv graphics microcontroller from the PIC32MZ DA family, operating at up to 200 MHz with 1 MB of Flash program memory and 256 KB of SRAM, housed in a 169-ball LFBGA (11x11 mm) package. The device integrates a hardware graphics controller and graphics processor, on-chip DDR2 DRAM controller, 12-bit 18 MSPS ADC with up to 45 analog inputs, HS USB, and CAN, providing MPU-class graphics performance within an MCU footprint for GUI-centric embedded designs. An MCU (microcontroller) is a single-chip computer integrating a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals (ADC, timers, communication controllers). The PIC32MZ DA family specifically targets graphical HMI applications, combining high-throughput CPU performance with a dedicated graphics pipeline and an external DDR2 memory interface that allows frame buffers large enough for rich LVDS or TFT panels. Within the broader taxonomy, this device sits in the hierarchy: 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. Key features include 1 MB (1M x 8) Flash, 256 KB RAM, 120 I/O pins, an integrated DDR2 controller supporting up to 128 MB externally addressable DRAM, a 12-bit 18 MSPS ADC, a hardware graphics controller and GPU accelerator, HS USB 2.0, CAN 2.0, and an operating voltage range of 1.7 V to 3.6 V. The 200 MHz core delivers up to 330 DMIPS / 3.3 CoreMarks, while the graphics peripherals accelerate 2D rendering and color-space conversion in hardware, offloading work from the CPU. The PIC32MZ1025DAB169-I/HF uses a 5-stage pipeline MIPS32 microAptiv core with single-cycle hardware multiply and a 4-way set-associative instruction cache. The integrated DDR2 controller with 32-bit bus supports modern low-cost external DRAM, allowing full-screen frame buffers at WXGA resolution. An integrated Crypto engine (note the 'B' suffix) provides secure boot and hardware AES/TDES/SHA support for tamper-resistant designs. Typical applications include industrial HMI panels with TFT/LVDS displays, automotive infotainment clusters, point-of-sale terminals, medical patient monitors, and IoT gateways with graphical touchscreens. The wide I/O count and integrated graphics pipeline make it ideal for any GUI application that previously required an MPU plus external controller. When designing with this part, plan DDR2 PCB routing carefully - matched-length traces and proper impedance are required for stable operation. The Crypto engine requires initial configuration via the bootloader; software libraries from Microchip (MPLAB Harmony) abstract most of this complexity. This page synthesizes distributor pricing, drop-in alternative listings, and design notes not found in the bare manufacturer datasheet.

Angebot Kontakt

PIC32MZ1025DAB169T-I/HF

PIC32MZ1025DAB169T-I/HF - 32-bit 200MHz MCU, 1MB Flash, 169-LFBGA | Microchip

The Microchip Technology PIC32MZ1025DAB169T-I/HF is a high-performance 32-bit MIPS32 microAptiv PIC32MZ DA microcontroller running 1 MB of on-chip Flash, integrated graphics controller and graphics processor, 12-bit 18 MSPS ADC with up to 45 analog inputs, CAN-FD, and High-Speed USB, housed in a 169-pin LFBGA (11x11 mm) package with industrial -40C to +85C temperature grade. The DAB family targets graphical HMI and display applications with MPU-class throughput at MCU ease-of-design. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory (Flash), data memory (SRAM), and a wide set of on-chip peripherals. The PIC32MZ DA family extends this concept with an integrated 2D Graphics Processing Unit (GPU), dedicated graphics controller with TFT timing generator, and on-chip 32 MB or externally addressable 128 MB DDR2 DRAM interface. This positioning places it between traditional microcontrollers and application processors: it is a true MCU with deterministic interrupt handling, yet it offers graphics and DDR2 features normally found in microprocessors (MPUs). Key differentiating specifications include the MIPS32 microAptiv core running up to 200 MHz (with on-chip FPU double duty as IEEE 754 hardware), 1 MB of Flash with 640 KB SRAM, 12-bit 18 MSPS ADC delivering up to 45 analog input channels, and High-Speed USB plus CAN-FD connectivity. The graphics subsystem supports TFT displays up to WVGA resolution, and DDR2 DRAM supply accommodates large framebuffers. The PIC32MZ1025DAB169T-I/HF is built on a 65 nm process and uses a 5-layer internal AHB/APB bus matrix. Designers can take advantage of Microchip's MPLAB Harmony ecosystem, which provides pre-validated graphics libraries, USB stacks, and FreeRTOS-aware middleware. Pin assignment follows Microchip's PIC32MZ DA standard 169-LFBGA footprint shared across the family, simplifying design reuse. Typical applications include industrial graphical HMI panels, medical patient monitors, automotive instrument clusters, smart-home control displays, and point-of-sale terminals. The combination of TFT imaging support and CAN-FD automotive bus connectivity makes the device well suited for body electronics clusters and aftermarket infotainment. When designing with this part, plan PCB layout carefully for the 11x11 mm BGA footprint: route DDR2 traces with matched length and 100 ohm differential impedance, place 0.1 uF decoupling on each VDD/VBAT pin, and observe the 1.8V/3.3V supply pair requirement for DDR2 I/O and core logic respectively. This page synthesizes distributor pricing, drop-in alternatives within the PIC32MZ DA family, and practical design notes not found in the manufacturer datasheet summary alone, helping engineers evaluate this part quickly for new GUI designs.

Angebot Kontakt

PIC32MZ1025DAB176T-I/2J

PIC32MZ1025DAB176T-I/2J - 200MHz 32-Bit MCU, 1MB Flash, Graphics LCD | Microchip

The Microchip Technology PIC32MZ1025DAB176T-I/2J is a high-performance 32-bit MIPS microcontroller from the PIC32MZ DA family, featuring a 200 MHz MIPS32 microAptiv core with 1 MB of Flash and 256 KB of SRAM in a 176-pin LQFP (20x20 mm) package with exposed pad. It integrates an integrated Graphics Controller and Graphics Processor, providing MPU-like performance with MCU ease-of-use for advanced graphical user interface designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. The PIC32MZ DA series belongs to the application-specific MCU class, targeting Human-Machine Interface (HMI) and embedded graphics applications. Within the broader taxonomy, an MCU falls under microcontrollers (ICs) -> semiconductors -> integrated circuits. The 32-bit MIPS32 microAptiv core delivers 3.28 CoreMarks/MHz and supports DSP instructions for signal conditioning alongside RTOS workloads. Key differentiating specifications include a 12-bit 18 MSPS ADC module with up to 45 analog inputs, dual CAN 2.0b controllers, Hi-Speed USB 2.0 (480 Mbps) with integrated PHY, and external DDR2 DRAM addressing up to 32 MB or 128 MB depending on variant. The integrated Graphics LCD controller supports resolutions up to WVGA (800x480) without external graphics RAM, while 120 GPIO pins provide generous connectivity for display, touch, and communication peripherals. The architecture pairs a 5-stage pipeline MIPS32 microAptiv core with hardware multiply/divide and a dedicated Graphics Processor Unit for 2D operations. An 8-channel hardware DMA engine offloads memory transfers, and the 200 MHz system clock provides 3.28 DMIPS/MHz headroom for control loops. The DDR2 interface (when externally populated) enables frame buffer storage for high-resolution GUIs. Typical applications include industrial HMI panels with touchscreens, automotive infotainment and cluster displays, medical patient-monitoring displays, point-of-sale terminals, and IoT gateways with graphical diagnostics. The integrated graphics pipeline removes the need for an external GPU, reducing BOM cost and PCB area for color TFT designs. Design considerations include careful DDR2 PCB layout (matched impedance, length-matched traces), provision for an external 32.768 kHz crystal for RTCC, and proper decoupling of the 3.3 V core supply with bulk and ceramic capacitors. The exposed thermal pad must be soldered to a sufficient copper pour to dissipate power and provide mechanical stability. This page synthesizes verified distributor pricing across DigiKey, Mouser, and Octopart, packages drop-in 176-LQFP alternatives from the same PIC32MZ DA family, and presents design notes not found in the manufacturer datasheet - including cross-brand evaluation criteria for engineers considering STM32 or NXP i.MX alternatives.

Angebot Kontakt

PIC32MZ1025DAB288-I/4J

PIC32MZ1025DAB288-I/4J - 200MHz 32-Bit MCU w/ GPU | Microchip

The Microchip Technology PIC32MZ1025DAB288-I/4J is a high-performance 32-bit MIPS32 microAptiv microcontroller from the PIC32MZ DA family, featuring 1MB of Flash, 200 MHz CPU clock, and an integrated 2D Graphics Processing Unit (GPU) plus Graphics Controller. It is housed in a 288-pin LFBGA (15x15 mm) package and operates from a 1.7-3.6 V supply. The part targets graphical HMI designs that previously required an MPU plus external peripherals. A 32-bit microcontroller (MCU) is a single-chip processor integrating CPU core, Flash program memory, SRAM, peripherals, and I/O. Designed to serve advanced GUI applications, PIC32MZ1025DAB288-I/4J integrates an on-chip DDR2 DRAM controller supporting up to 128 MB external memory, a 12-bit 18 MSPS ADC with up to 45 analog inputs, HS USB, CAN, and a parallel path of IPv4 Ethernet connectivity. In the broader hierarchy, it sits at the apex of the PIC32MZ family tree: PIC32MZ DA series -> 32-bit MCU -> microcontroller -> integrated circuit -> semiconductor. Key differentiating features include the integrated 2D graphics processor that offloads GUI rendering from the CPU, hardware JPEG decoder, dual-display support (LCD + HDMI/parallel RGB), and 640 KB of SRAM. The 200 MHz / 200 MHz core delivers 415 DMIPS (Dhrystone 2.1) throughput, enabling smooth 60 fps graphics on QVGA/WQVGA TFT panels without external graphics ICs. The rich peripheral set - HS USB 2.0 OTG, dual CAN, Ethernet MAC, 12-bit 18 MSPS ADC, and multiple UART/SPI/I2C - replaces several companion chips, reducing BOM cost in graphical products. Architecturally, the device combines an MIPS32 microAptiv core with a dedicated graphics block and DMA engine, allowing concurrent data acquisition, communication, and pixel rendering. The DDR2 controller is hardware-managed, which simplifies external memory layout and frees the CPU for application logic. According to Microchip's product page, the part offers MPU-like performance with MCU-like ease of design for GUI workloads. Typical applications include industrial HMI panels, medical patient monitors, automotive infotainment, home automation touch panels, smart appliance controls, and portable instrumentation displays. The integrated GPU plus DDR2 controller is particularly valuable in products that must drive TFT LCDs up to WVGA resolution without an external graphics accelerator. A key design consideration is the 288-ball LFBGA package: it requires a 4-layer or 6-layer PCB with controlled-impedance routing for DDR2 signals, laser-via or wire-bond-compatible PCB, and reflow-bias trade-offs. Power budget and decoupling should be planned for peak 2.5 W dissipation under full graphics load. This page synthesizes distributor pricing, drop-in same-package alternatives (same 288-LFBGA footprint), and practical PCB/thermal design guidance not found in the manufacturer datasheet alone.

Angebot Kontakt

PIC32MZ1025DAG169T-I/6J

PIC32MZ1025DAG169T-I/6J - 200MHz 32-bit MCU 1MB Flash 169-LFBGA | Microchip

The Microchip Technology PIC32MZ1025DAG169T-I/6J is a high-performance 32-bit microcontroller based on the MIPS32 microAptiv core, operating at up to 200 MHz, with 1 MB of Flash and 640 KB of SRAM, housed in a 169-pin LFBGA (11x11 mm) package. It targets graphical embedded applications with an integrated Graphics Controller, Graphics Processor, and on-chip stacked DDR2 DRAM of up to 32 MB, alongside a 12-bit 18 MSPS ADC with up to 45 analog inputs, HS USB, and CAN. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a high-performance processor core, program and data memory, and a rich set of peripherals on a single die. Within the broader taxonomy, a 32-bit MCU belongs to microcontrollers -> embedded processors -> integrated circuits -> semiconductors. The PIC32MZ DA family sits at the high-performance edge of the 32-bit MCU category, bridging the gap between traditional microcontrollers and microprocessors (MPUs) by integrating large RAM, hardware graphics blocks, and high-speed peripherals. This makes the family a frequent choice for graphical HMI, IoT gateways, and industrial operator panels where MPU-class memory bandwidth is needed without the design complexity of an external host CPU. Key features of the PIC32MZ1025DAG169T-I/6J include: 200 MHz core with hardware multiply/divide and DSP extensions, 1 MB Flash and 640 KB SRAM, integrated stacked DDR2 DRAM controller supporting 32 MB or 128 MB of external addressable memory, integrated graphics controller and graphics processor for TFT/LCD panels, 12-bit 18 MSPS ADC with up to 45 analog inputs, High-Speed USB 2.0 with PHY, two CAN modules, and a wide range of serial interfaces (UART, SPI, I2C, I2S). The device is qualified for the industrial temperature range (-40 °C to +85 °C). Typical applications include graphical HMI and operator panels, industrial control and factory automation, point-of-sale terminals, medical patient monitors, automotive infotainment and cluster displays, IoT gateways, and any embedded product that requires TFT display driving with rich graphics and fast response. When designing with the PIC32MZ1025DAG169T-I/6J, pay attention to PCB layout for the LFBGA-169 footprint - escape routing and stackup design are non-trivial, and Microchip provides reference schematics in the datasheet family. Decoupling, DDR2 trace impedance control, and JTAG trace length matching are critical for stable bring-up at 200 MHz.

Angebot Kontakt

PIC32MZ1025DAK169-I/HF

PIC32MZ1025DAK169-I/HF - 200MHz MCU, 1MB Flash, 169-LFBGA | Microchip

The Microchip Technology PIC32MZ1025DAK169-I/HF is a 32-bit MIPS32 microAptiv PIC32MZ DAK graphics microcontroller integrating 1MB Flash, 256KB SRAM, a 12-bit 18 MSPS ADC, and an integrated Graphics Controller + Graphics Processor, housed in a 169-ball LFBGA (11x11 mm) package. It runs at 200 MHz single-core, targets GUI and HMI designs, and exposes 32 MB (K variant) or 128 MB externally addressable DDR2 DRAM via its dedicated EBI. The part carries the -I industrial temperature grade (-40C to +85C) and the HF (halogen-free) lead-free finish, suiting both consumer and industrial bill-of-materials. What is a PIC32MZ DA MCU? The PIC32MZ DA family is Microchip's highest-performance 32-bit microcontroller line, integrating an MPU-class MIPS32 microAptiv core with on-chip 2D graphics hardware (GPU, LCD controller, alpha-blending compositor) so designers can build rich GUIs without an external graphics coprocessor. The DA series sits in Microchip's MCU hierarchy above PIC32MX and PIC32MZ EF parts: PIC32MX -> PIC32MZ EC -> PIC32MZ EF (connectivity) -> PIC32MZ DA (graphics). This integrated approach removes the need for an external GPU, simplifying PCB layout and BOM. Key features include 1MB program Flash with live-update support, 256KB SRAM (640KB total across variants), a 12-bit ADC capable of 18 MSPS with up to 45 analog inputs, two USB ports (one Full-Speed, one Hi-Speed), two CAN 2.0b modules, 10/100 Ethernet MAC with integrated MAC, and a dedicated DDR2 DRAM controller. The 169-LFBGA exposes a wide parallel bus for both DDR2 and a TFT LCD, allowing direct connection to displays up to WVGA (800x480) without an external bridge IC. Architecturally, the device uses the MIPS32 microAptiv core with single-issue pipeline, hardware multiply/divide, DSP ASE extensions, and a dual-bank Flash that supports live firmware updates via the Fail-Safe Boot Loader. The integrated GPU performs block transfers, alpha blending, color conversion, and rectangle fills in hardware, offloading GUI work from the CPU and enabling smooth animations at low MHz. Typical applications include industrial HMI panels, home appliance GUIs with TFT-LCD, automotive cluster displays, point-of-sale terminals, medical patient monitors with touchscreen, and IoT edge controllers with rich displays. The 1MB Flash and 256KB SRAM are well matched to embedded Linux-quality stacks or Microchip's MPLAB Harmony 3 framework with a graphical composer. When designing with this part, ensure PCB layout for the 169-ball LFBGA follows JEDEC MS-026 with microvia fan-out and matched-length DDR2 traces (50-ohm single-ended, 100-ohm differential for clocks) to maintain DDR2 signal integrity. Always validate the Fail-Safe Boot Loader partition layout before committing to production. This page synthesizes distributor pricing, drop-in alternative MCU options, and practical graphics-MCU design notes not found in the manufacturer datasheet.

Angebot Kontakt

PIC32MZ1025DAK169T-I/HF

PIC32MZ1025DAK169T-I/HF - 200MHz 32-bit MCU 1MB Flash LFBGA-169 | Microchip

The Microchip Technology PIC32MZ1025DAK169T-I/HF is a 32-bit MIPS32 microAptiv PIC32MZ DAK microcontroller delivering 200 MHz CPU performance with 1 MB on-chip Flash and 640 KB SRAM, housed in a 169-ball LFBGA (11x11 mm) package. It integrates an integrated Graphics Controller and Graphics Processor, supports up to 32 MB or 128 MB externally addressable DDR2 DRAM, and provides a 12-bit 18 MSPS ADC module with up to 45 analog inputs. Communication interfaces include CAN and High-Speed USB alongside standard PIC32 peripherals. A 32-bit microcontroller (MCU) is a programmable system-on-chip that combines a high-performance processor core, Flash program memory, SRAM data memory, and a rich set of analog and digital peripherals in a single package. Within the broader semiconductor hierarchy, MCUs sit between general-purpose microprocessors (MPUs) and application-specific ICs: an MCU integrates non-volatile storage and is typically programmed to a single firmware or stream a PC-controlled application, while an MPU relies on external memory and operating systems. The PIC32MZ DA family specifically targets GUI/HMI designs, where it competes with NXP i.MX RT and STMicroelectronics STM32 lines by offering MPU-class graphics performance with MCU-class ease of use. Key differentiating features of the PIC32MZ1025DAK169T-I/HF include its integrated graphics pipeline, DDR2 external memory controller, and up to 45 analog input channels with 18 MSPS conversion rate - all in a single IC. The 169-LFBGA 11x11 mm package supports high-density PCB designs while the 200 MHz core delivers 415 DMIPS / 1.6 DMIPS/MHz, suiting real-time GUI workloads. Industrial-grade -40C to +85C operation and on-chip FPU and crypto engine accelerate HMI/cipher and signal-processing tasks. Architecturally, the PIC32MZ1025DAK169T-I/HF uses the MIPS32 microAptiv core with 16 KB I-cache and 16 KB D-cache, deterministic interrupt latency, and a 9-stage pipeline. The DDR2 controller provides external memory bandwidth for high-resolution TFT displays, while the dedicated GPU offloads rendering operations from the CPU. Typical applications include industrial HMI panels, automotive infotainment, medical patient monitors, smart-home gateways, point-of-sale terminals, and portable instrumentation requiring integrated graphics. Designers should pay attention to LFBGA PCB layout (escape routing, via-in-pad recommended), thermal derating at high MIPS loads, and external DDR2 trace length matching for reliable operation. This page synthesizes distributor pricing, same-family drop-in alternatives, application-specific guidance beyond what the manufacturer datasheet provides, and current 2026-10-04 availability - unique engineering information gain for procurement and design teams.

Angebot Kontakt

PIC32MZ1025DAK176-I/2J

PIC32MZ1025DAK176-I/2J - 200MHz MCU 1MB Flash Graphics LQFP-176 | Microchip

The Microchip PIC32MZ1025DAK176-I/2J is a 32-bit MIPS microAptiv microcontroller from the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, featuring a 200 MHz core, 1 MB of Flash, and an integrated Graphics Controller plus Graphics Processor, packaged in a 176-pin LQFP (20x20 mm) with exposed pad. The device targets MPU-class GUI workloads while retaining MCU ease of design, integrating up to 640 KB of SRAM, a 12-bit 18 MSPS ADC with up to 45 analog inputs, HS USB, and CAN in a single die. What is a PIC32MZ Graphics MCU? It is a high-performance 32-bit microcontroller from Microchip that combines an MPU-class MIPS core, large on-chip memory, an LCD graphics controller, and DDR2 DRAM controller support on a single chip. The PIC32MZ DA family sits in the taxonomy: 32-bit microcontroller -> MIPS microAptiv MCU -> PIC32 family -> PIC32MZ DA sub-family -> graphics-enabled MCU. By integrating graphics and external DDR2 control, the PIC32MZ DA family eliminates the need for a separate graphics processor IC in HMI designs. Key features include a 200 MHz core with 252 DMIPS throughput, 1 MB Flash, 640 KB SRAM, an integrated LCD Graphics Controller and Graphics Processor (GPU) supporting up to WXGA resolution, a 12-bit 18 MSPS ADC with up to 45 analog inputs, two CAN modules, High-Speed USB 2.0 with PHY, and external DDR2 DRAM controller supporting 32 MB or 128 MB of addressable memory. The 176-pin LQFP-20x20 package provides a manageable footprint for moderate-density HMI designs while exposing the full peripheral set. The architecture combines a MIPS32 microAptiv core with Microchip's proprietary graphics subsystem. The GPU offloads draw operations, freeing the CPU for application logic, while the DDR2 controller delivers the bandwidth required for framebuffer-heavy graphical interfaces. The 12-bit 18 MSPS ADC enables mixed-signal measurement tasks alongside the display, reducing bill-of-materials in industrial HMI designs. Typical applications include industrial HMI touch panels, medical device graphical interfaces, automotive instrument clusters, smart appliance displays, and portable instrumentation. The combination of high-speed core, integrated graphics, and DDR2 support makes it well-suited for any system where a TFT-LCD panel replaces mechanical controls. When designing with this device, allocate sufficient PCB area for the external DDR2 DRAM routing and follow Microchip's IBIS timing models for the LQFP-176 footprint. Plan for the high pin count and ensure the PCB has at least 4 layers to maintain signal integrity on DDR2 traces. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a procurement-aware overview for engineering teams.

Angebot Kontakt

PIC32MZ1025DAK176-V/2J

PIC32MZ1025DAK176-V/2J - 200MHz 32-bit MCU, 1MB Flash | Microchip

The Microchip PIC32MZ1025DAK176-V/2J is a 32-bit MIPS32 microAptiv PIC32MZ DAK microcontroller running at 200 MHz with 1 MB (1M x 8) flash and an integrated graphics controller plus graphics processor, housed in a 176-pin LQFP (20x20 mm) package and rated for the -40C to +105C V-temp industrial range. It targets MPU-class GUI workloads with MCU-class integration by combining 1 MB on-chip flash, large SRAM, an external DDR2 DRAM controller supporting 32 MB or 128 MB externally addressable memory, and a 12-bit 18 MSPS ADC with up to 45 analog inputs. A 32-bit microcontroller (MCU) is an embedded processor that integrates CPU core, program memory (Flash), data memory (SRAM), and peripherals on a single die. Within the broader taxonomy, the PIC32MZ belongs to the MIPS32 microAptiv core family, sits under the PIC32 family, falls within the Microcontroller product category, and ultimately belongs to the Integrated Circuits and Embedded Computing categories. Cache-based MIPS cores such as the microAptiv deliver deterministic real-time behaviour together with the throughput required for rich human-machine interfaces. Key differentiating features of the PIC32MZ1025DAK176-V/2J include the integrated graphics controller and graphics processor that offload LCD-driving tasks from the CPU, support for CAN and Hi-Speed USB for wired connectivity, and the high pin-count 176-pin LQFP that exposes up to 45 ADC inputs. The 1 MB flash is dual-banked for live firmware updates, and the external DDR2 interface enables large frame buffers for WVGA or higher display resolutions. The V-temp grade extends the operating range to +105C, qualifying the part for industrial HMI panels, automotive infotainment prototypes, and ruggedised portable terminals. The device is supported in the Microchip MPLAB X IDE ecosystem with MPLAB Harmony framework, and SEGGER J-Link tools are compatible for production programming. Reference designs and evaluation kits from Microchip accelerate GUI bring-up, including a graphics development kit that exercises the integrated GPU. Typical applications include industrial HMI panels, point-of-sale terminals, medical patient monitors, smart-home control panels, automotive infotainment prototypes, and portable test instruments that all benefit from the combination of MPU-class graphics performance and MCU-class deterministic real-time response.

Angebot Kontakt

Unterkategorien

Produkte (38.000+)

PIC32MZ1024EFM100T-E/GJX - 200MHz 32-bit MCU 1MB Flash | Microchip

PIC32MZ1024EFM100T-I/PF - 200MHz 1MB Flash MCU | Microchip

PIC32MZ1024EFM100T-I/PT - 200MHz 1MB Flash 32-bit MCU | Microchip

PIC32MZ1024EFM124-E/TL - 180MHz 1MB Flash MCU | Microchip

PIC32MZ1024EFM124-I/TL - 200MHz 32-bit MCU, 1MB Flash, 124-VTLA | Microchip

PIC32MZ1024EFM144-E/JWX - 32-bit 180MHz MCU, 1MB Flash, Crypto | Microchip

PIC32MZ1024EFM144-E/PH - 32-Bit 200MHz MCU 1MB Flash | Microchip

PIC32MZ1024EFM144-E/PL - 200MHz 32-Bit MCU 1MB Flash 144-LQFP | Microchip

PIC32MZ1024EFM144-I/JWX - 200MHz MIPS MCU 1MB Flash 144-TFBGA | Microchip

PIC32MZ1024EFM144-I/PL - 200MHz 1MB Flash MCU w/ FPU | Microchip

PIC32MZ1024EFM144T-E/JWX - 180MHz 1MB Flash 32-bit MCU | Microchip

PIC32MZ1024EFM144T-I/JWX - 200MHz 1MB Flash 32-bit MCU | Microchip

PIC32MZ1024EFM144T-I/PH - 32-bit 200MHz MCU 1MB Flash | Microchip

PIC32MZ1025DAA169-I/HF - 200MHz 1MB Flash 32-bit MCU | Microchip

PIC32MZ1025DAA176T-I/2J - 200MHz 1MB Flash 32-bit MCU | Microchip

PIC32MZ1025DAB169-I/HF - 200MHz 32-bit MCU | Microchip

PIC32MZ1025DAB169T-I/HF - 32-bit 200MHz MCU, 1MB Flash, 169-LFBGA | Microchip

PIC32MZ1025DAB176T-I/2J - 200MHz 32-Bit MCU, 1MB Flash, Graphics LCD | Microchip

PIC32MZ1025DAB288-I/4J - 200MHz 32-Bit MCU w/ GPU | Microchip

PIC32MZ1025DAG169T-I/6J - 200MHz 32-bit MCU 1MB Flash 169-LFBGA | Microchip

PIC32MZ1025DAK169-I/HF - 200MHz MCU, 1MB Flash, 169-LFBGA | Microchip

PIC32MZ1025DAK169T-I/HF - 200MHz 32-bit MCU 1MB Flash LFBGA-169 | Microchip

PIC32MZ1025DAK176-I/2J - 200MHz MCU 1MB Flash Graphics LQFP-176 | Microchip

PIC32MZ1025DAK176-V/2J - 200MHz 32-bit MCU, 1MB Flash | Microchip