PIC32MZ1024EFM100T-I/PF - 200MHz 1MB Flash MCU | Microchip
Teilenummer: PIC32MZ1024EFM100T-I/PF ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $11.85 | $11,85 |
| 10 | $10.95 | $109,50 |
| 100 | $9.55 | $955,00 |
| 500 | $8.65 | $4.325,00 |
| 1.000 | $7.95 | $7.950,00 |
PIC32MZ1024EFM100T-I/PF Übersicht
An MCU (Microcontroller Unit) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals (ADCs, timers, communication interfaces). Microcontrollers sit inside the larger hierarchy of embedded computing devices -> microcontrollers -> 32-bit microcontrollers -> MIPS-based MCUs, and they are the central processing element for almost every connected embedded product. The PIC32MZ EF family targets connectivity-rich designs where large memory, USB-HS, Ethernet, and CAN interfaces are required.
Key features of the PIC32MZ1024EFM100T-I/PF include a hardware crypto engine (AES, SHA, MD5, DES), a 200 MHz/330 DMIPS MIPS M-class core with DSP extensions, IEEE 754-compliant FPU, four 64-bit accumulators and single-cycle MAC with saturating and fractional math. The device exposes USB-HS (High Speed), Ethernet MAC, CAN, six UART/SPI/I2C modules, and a 12-bit 5 MSPS ADC with up to 48 channels. The 100-pin TQFP package supports parallel bus and extended peripherals via the EBIO/EBIH (External Bus Interface) pins.
The architecture combines a high-performance pipeline, tightly-coupled instruction cache, and a dedicated crypto accelerator that offloads TLS/SSL handshakes and AES encryption without CPU intervention. The integrated 1 MB Flash with error-correcting code (ECC) and 512 KB SRAM enable complex protocol stacks (TCP/IP, USB-HS, graphics) to run on-chip without external memory. The 200 MHz core with DSP extensions makes the device equally suitable for motor-control DSP loops and HMI graphics rendering.
Typical applications include industrial IoT gateways, automotive infotainment and connectivity, USB-HS peripherals, graphics/HMI controllers, secure-connected motor drives, and edge-AI sensor nodes. The wide peripheral mix and the integrated crypto engine are particularly compelling where TLS, secure boot, or field firmware updates are mandatory.
When designing with this part, place a 10 uF plus 0.1 uF decoupling pair near every VDD/VSS pin group, route the 200 MHz-related clocks on the inner PCB layer with a continuous ground reference, and consult the family reference manual section on system-on-chip integration for clock-switching and power-mode entry. Designers migrating from PIC32MX should pay attention to the higher I/O count and 3.3 V tolerance differences.
This page synthesizes distributor pricing (DigiKey, Mouser, LCSC), validated drop-in alternatives from Microchip's PIC32MZ EF family, and practical design notes that go beyond the manufacturer's datasheet - information an engineer can act on immediately.
Drop-in-Alternativen für PIC32MZ1024EFM100T-I/PF – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PIC32MZ1024EFM100T-I/PF (gleiche Bauform und Footprint) – abweichend in ADC, Package, Core Architecture, USB, CAN.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
PIC32MZ1024EFM100T-E/PF
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
PIC32MZ1024EFK100T-I/PF
✅ Drop-In✓ Auf Lager
$6.08 / Stück
Datenblatt ansehen →PIC32MZ1024EFH100T-I/PT
✅ Drop-In✓ Auf Lager
$8.05 / Stück
Datenblatt ansehen →PIC32MZ1024EFG100T-I/PT
✅ Drop-In✓ Auf Lager
$6.1 / Stück
Datenblatt ansehen →PIC32MZ1024EFF100T-I/PF
✅ Drop-In✓ Auf Lager
$8.95 / Stück
Datenblatt ansehen →PIC32MZ1024EFM100T-I/PF Grenzwerte & elektrische Eigenschaften
| Core Architecture | MIPS32 M-Class (PIC32MZ EF) |
| Core Frequency (max) | 200 MHz |
| DMIPS | 330 DMIPS |
| FPU | IEEE 754-compliant hardware FPU |
| DSP Extensions | 4x 64-bit accumulators, single-cycle MAC, saturating + fractional math |
| Flash Program Memory | 1 MB (1024 KB) |
| SRAM Data Memory | 512 KB |
| Gehäuse | 100-pin TQFP (14x14 mm) |
| Betriebstemperatur | -40 C to +85 C (Industrial) |
| Supply Voltage (VDD) | 2.3 V to 3.6 V |
| USB | USB-HS (High Speed) with PHY |
| Ethernet MAC | 10/100 Mbps MAC (RMII/MII) |
| CAN | CAN 2.0B |
| Crypto Engine | AES, SHA, MD5, DES, RNG |
| ADC | 12-bit, up to 48 channels, 5 MSPS |
| RoHS-Status | Compliant |
| Lead-Free | Yes |
| Montageart | Surface Mount |
| MSL-Level | MSL3 (168 hours) |
PIC32MZ1024EFM100T-I/PF 100-pin tqfp (14x14 mm) Pinbelegungsleitfaden
Pinbelegung für PIC32MZ1024EFM100T-I/PF (100-pin tqfp (14x14 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für PIC32MZ1024EFM100T-I/PF.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
PIC32MZ1024EFM100T-I/PF ist geeignet für 6 Anwendungs: Industrial IoT Gateway, Automotive Connectivity / Infotainment, USB-HS Peripheral Device, Graphical HMI Controller, Secure Connected Motor Drive, Edge AI / Sensor Fusion Node.
Industrial IoT Gateway
The PIC32MZ1024EFM100T-I/PF is a strong fit for industrial IoT gateways thanks to its integrated 10/100 Ethernet MAC, USB-HS, and six serial interfaces that expose SPI/UART/I2C without external glue logic. With 1 MB Flash and 512 KB SRAM, a full Harmony TCP/IP + MQTT/HTTPS stack can be embedded on-chip with no external memory, and the hardware crypto engine accelerates TLS handshakes off-CPU. The industrial -40C to +85C range suits factory-floor deployment. Place between an isolated RS-485 link layer and the Ethernet PHY, with the 200 MHz core polling sensor frames at sub-10 ms cadence; the only trade-off versus a Linux-class gateway is that user-space applications must be written in C against Harmony rather than under an OS.
Empfohlen
Automotive Connectivity / Infotainment
The PIC32MZ1024EFM100T-I/PF's CAN 2.0B controller plus USB-HS make it suitable for automotive connectivity modules, body controllers, and infotainment peripherals that bridge CAN buses with external USB devices. The hardware crypto engine accelerates secure-boot verification and over-the-air (OTA) firmware authentication, a regulatory requirement for connected-car ECUs. At 200 MHz / 330 DMIPS, it can sustain CAN-FD frame processing plus USB CDC communication concurrently. Designers targeting AEC-Q100 should step up to the PIC32MZ1024EFM100T-E/PF (extended temperature); the standard "I" grade is suitable for cabin modules only, not under-hood use.
Empfohlen
USB-HS Peripheral Device
The PIC32MZ1024EFM100T-I/PF includes a USB-HS PHY and dedicated DMA, so it can implement USB 2.0 High-Speed peripherals (480 Mbps) without an external PHY. Typical use cases are data-acquisition USB streams, USB audio class 2.0 devices, and USB-CDC virtual COM ports at >1 MBaud. The 512 KB SRAM buffers high-throughput isochronous endpoints, and the 200 MHz MIPS core runs the protocol stack with comfortable margin. Power: VBUS 5 V enters via a buck regulator to 3.3 V VDD; the on-chip USB-PHY draws ~50 mA in active HS traffic - budget accordingly.
Empfohlen
Graphical HMI Controller
The PIC32MZ1024EFM100T-I/PF's large 1 MB Flash, 512 KB SRAM, 200 MHz core, and parallel external bus interface (EBI) make it a competent HMI controller for 4.3 to 7 inch TFT displays driven by an external graphics controller. The integrated crypto engine secures graphical HMI firmware updates and prevents UI cloning. Designers should connect the MCU's EBIHS pins to a Solomon Systech SSD1963 or RA8875 controller; the 200 MHz MIPS core then renders text/bitmaps while the external LCD controller refreshes the panel. Power budget: 3.3 V at ~120 mA active, well within a 3.3 V LDO from a 5 V USB input.
Empfohlen
Secure Connected Motor Drive
The PIC32MZ1024EFM100T-I/PF's DSP extensions (four 64-bit accumulators, single-cycle MAC, saturating math) make it suitable for field-oriented control (FOC) of PMSM/BLDC motors at up to several kHz loop rates. The hardware AES engine secures the firmware update channel while the CAN 2.0B and EtherCAT-capable peripherals handle real-time fieldbus communication. Pair the MCU with a 3-phase gate driver such as the MCP8024; the 200 MHz MIPS core runs the FOC math and the SVPWM modulation in the same loop iteration. Trade-off: for sub-1 kW motors the dedicated dsPIC33 family is more cost-effective; the PIC32MZ EF excels at higher-power or connected drives where the Ethernet and crypto are required.
Empfohlen
Edge AI / Sensor Fusion Node
The PIC32MZ1024EFM100T-I/PF's 200 MHz MIPS core with FPU + DSP extensions can run lightweight inference engines (e.g., fixed-point CNNs for vibration or audio classification) on aggregated sensor streams. The 1 MB Flash holds the model plus the TCP/IP gateway stack, eliminating the cloud round-trip latency for time-critical decisions. Combined with the 12-bit 5 MSPS ADC for vibration sampling and USB-HS for high-bandwidth data offload, the device suits edge-AI sensor nodes that must function at industrial temperature. Trade-off: for >1 MHz DSP sample rates or >1 M parameters, consider the PIC32MZ EFH family with 252 MHz core instead.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PIC32MZ1024EFM100T-I/PF – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PIC32MZ1024EFM100T-E/PF | PIC32MZ1024EFK100T-I/PF | PIC32MZ1024EFH100T-I/PT | PIC32MZ1024EFG100T-I/PT | PIC32MZ1024EFF100T-I/PF |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-100 (14x14 mm) | TQFP-100 (14x14 mm) - same | TQFP-100 (14x14 mm) - same | TQFP-100 (12x12 mm) - different footprint | TQFP-100 (12x12 mm) - different footprint | TQFP-100 (14x14 mm) - same |
| Core Frequency | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Flash Memory | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB |
| SRAM | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| Operating Temperature | -40 C to +85 C (Industrial) | -40 C to +125 C (Extended) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) |
| Crypto Engine | Yes (AES/SHA/MD5/DES + RNG) | Yes (AES/SHA/MD5/DES + RNG) | No (K suffix = no crypto) | Yes | Yes | No (F suffix = no crypto) |
| USB | USB-HS with PHY | USB-HS with PHY | USB-HS with PHY | USB-HS with PHY | USB-HS with PHY | USB-HS with PHY |
| Ethernet MAC | 10/100 Mbps | 10/100 Mbps | 10/100 Mbps | 10/100 Mbps | 10/100 Mbps | 10/100 Mbps |
Wichtigste Unterscheidungsmerkmale
- Drop-in compatible extended-temperature variant for automotive designs (vs. PIC32MZ1024EFM100T-E/PF)
- Hardware crypto engine for TLS offload (vs. PIC32MZ1024EFF100T-I/PF)
- 14x14 mm TQFP-100 footprint for hand-rework-friendly industrial designs (vs. PIC32MZ1024EFH100T-I/PT)
Designhinweise
Decouple every VDD/VSS pin pair with a 100 nF ceramic plus a 4.7 uF bulk capacitor placed within 3 mm of the MCU. The 200 MHz core draws sub-cycle inrush currents; insufficient decoupling causes brown-outs that look like software hangs. Per Microchip datasheet DS60001320H, VDD must be monotonic from 0 to 2.3 V; use a supervisor IC if the input source is unpredictable.
Route the 200 MHz system clock traces on an inner PCB layer with a continuous ground reference plane. Keep the USB-HS differential pair (D+/D-) to a 90-ohm differential impedance with length matching under 150 mil. The Ethernet RMII/MII lines to the external PHY must be length-matched to within 50 mil for the clock pair. The exposed thermal pad of the TQFP-100 must be soldered to a copper pour stitched with thermal vias to inner ground.
Do not exceed 3.6 V on any VDD pin - the PIC32MZ EF is a 3.3 V part. Configure flash wait states correctly when running above 150 MHz, otherwise code fetches silently corrupt. The on-chip voltage regulator requires the VREGOUT pin to have a 4.7 uF low-ESR capacitor to ground; omitting it causes intermittent reset faults. When migrating from PIC32MX to PIC32MZ, review the I/O-pin remapping table - pin function assignments are not 1:1 compatible.
Place the 12-bit ADC reference decoupling (0.1 uF + 10 uF) within 5 mm of the AVDD/AVSS pins. Keep ADC analog traces away from the USB-HS and Ethernet differential signals to avoid crosstalk into the analog measurements. The crypto engine uses internal DMA; placing the MCU close to external flash/SRAM (if used) avoids timing violations on the QA library calls.
Compliance-Informationen
RoHS compliant per Microchip product page. Not AEC-Q100 qualified in this industrial grade; the PIC32MZ1024EFM100T-E/PF (Extended temperature grade) is the closest AEC-style variant but still requires formal AEC-Q100 qualification per project. Lead-free (Pb-free).
