Integrierte Schaltungen

PIC32MZ1025DAL176T-I/2J

PIC32MZ1025DAL176T-I/2J - 32-bit MCU, 1MB Flash, 200MHz, LQFP-176

The Microchip Technology PIC32MZ1025DAL176T-I/2J is a 32-bit MIPS32 microAptiv PIC32MZ DAL microcontroller with 1MB (1M x 8) Flash, 200 MHz CPU speed, and integrated Graphics Controller + Graphics Processor, packaged in a 176-pin LQFP (20x20 mm) with exposed pad. It delivers MPU-class performance with MCU-class development flow for GUI and HMI designs, targeting applications that demand 2D graphics, DDR2 memory expansion, USB, CAN, and rich analog peripherals on a single chip. What is a 32-bit microcontroller? A 32-bit microcontroller (MCU) is an embedded computing device whose data path, registers, and ALU are 32 bits wide, enabling higher throughput, larger address space, and richer software ecosystems than 8- or 16-bit MCUs. The PIC32MZ DA family sits in the broader hierarchy as: 32-bit microcontroller -> MIPS32 microAptiv core -> PIC32MZ DA family -> graphics-enabled MCU -> embedded semiconductor. These devices bridge the gap between traditional MCUs and application processors by combining deterministic real-time control with MPU-level peripherals such as large parallel external memory buses, LCD controllers, and 2D graphics engines. Key features include a 200 MHz core, up to 32MB or 128MB externally addressable DDR2 DRAM, integrated Graphics Controller and Graphics Processor for TFT LCD panels, 12-bit 18 MSPS ADC with up to 45 analog inputs, High-Speed USB, CAN, and a wide set of communication peripherals (UART, SPI, I2S, I2C). The 176-pin LQFP-EP package provides ample GPIO for parallel bus and TFT data lines, while still allowing hand-soldering and standard PCB assembly. The PIC32MZ1025DAL176T-I/2J leverages a 5-stage pipeline MIPS32 microAptiv core with DSP extensions, hardware multiply-accumulate, and a tightly coupled prefetch cache, supporting deterministic interrupt response for real-time HMI tasks. The integrated 2D Graphics Processor accelerates primitive rendering, blit, and alpha-blend operations so the CPU is not taxed when driving WVGA-class TFT displays. Typical applications include industrial HMI panels, medical patient monitors, point-of-sale terminals, smart home control displays, and automotive cluster/instrument displays. The device is also used in any GUI-heavy embedded product that benefits from DDR2 expansion to host full-color framebuffers and large fonts/icon sets. When designing with this part, allocate sufficient PCB area for the DDR2 routing (length-matched byte lanes, controlled impedance) and ensure the exposed thermal pad is soldered to a sufficient copper pour for thermal dissipation under heavy CPU + graphics load. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet - giving engineers and buyers a faster decision path than the Microchip product page alone.

Angebot Kontakt

PIC32MZ1025DAL176T-V/2J

PIC32MZ1025DAL176T-V/2J - 200MHz MCU, 1MB Flash, 176-LQFP | Microchip

The Microchip Technology PIC32MZ1025DAL176T-V/2J is a 32-bit MIPS32 microAptiv PIC microcontroller from the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, integrating 1 MB of Flash, 640 KB of SRAM, an integrated Graphics Controller, and a dedicated Graphics Processor in a 176-pin LQFP package measuring 20x20 mm. It operates at a maximum core clock of 200 MHz and supports up to 45 analog inputs through a 12-bit 18 MSPS ADC module, with an externally addressable DDR2 DRAM interface (32 MB or 128 MB). What is a 32-bit microcontroller? A 32-bit microcontroller (MCU) is a single-chip computer with a 32-bit data path, allowing it to process larger data words per instruction cycle than 8-bit or 16-bit devices. Within the broader semiconductor hierarchy, MCUs sit below microprocessors (MPUs) in RAM/Flash integration but above discrete logic ICs in functional density. The PIC32MZ DAL family targets MPU-like performance while keeping the deterministic interrupt response and ease-of-use of an MCU. Key features of the PIC32MZ1025DAL176T-V/2J include an integrated Graphics Controller with dedicated 2D GPU, hardware JPEG decoder, and TFT/LCD interface. The device offers 200 MHz CPU clock, 1 MB Flash, 640 KB SRAM, CAN, Hi-Speed USB 2.0 (480 Mbps), and 12-bit 18 MSPS ADC with up to 45 analog inputs. The V-temp grade (V in part number) supports -40C to +105C operation for industrial and harsh-environment designs. Architecturally, the PIC32MZ1025DAL176T-V/2J is built on the MIPS32 microAptiv core with separate instruction and data caches, a 9-stage pipeline, and DSP extensions. The integrated Graphics Controller offloads 2D rendering and JPEG decode from the CPU, enabling smooth GUI performance for HMI displays. The DDR2 interface allows a large frame buffer to be placed off-chip, simplifying the design of an eye-digit display with high color depth. Typical applications include industrial human-machine interface (HMI) panels, automotive infotainment and cluster displays, point-of-sale terminals, medical patient monitors, and graphics-enabled IoT gateways. Designers choose this part for integrated display driving without an external graphics controller. A critical design consideration for the LQFP-176 footprint is PCB escape: with 176 pins at 0.5 mm pitch, fan-out is challenging on a 4-layer board. Inner-layer power planes should be dedicated to the DDR2 interface to maintain signal integrity above 200 MHz. The integrated DDR2 PHY also requires matched trace lengths (per the datasheet) and proper termination. This page synthesizes distributor pricing, V/2J tape-and-reel variant details, and same-package drop-in PIC32MZ DAL alternatives not collated in the manufacturer datasheet, providing engineers with a single-source reference for sourcing and second-source decisions.

Angebot Kontakt

PIC32MZ1025DAR169-I/6J

PIC32MZ1025DAR169-I/6J - 200MHz 32-bit MCU w/ Graphics | Microchip

The Microchip Technology PIC32MZ1025DAR169-I/6J is a 32-bit MIPS32 microAptiv PIC32MZ DAR microcontroller running at 200 MHz with 1 MB of Flash program memory, 640 KB of SRAM, and an integrated graphics controller, housed in a 169-ball LFBGA (11x11 mm) package. It is the DAR variant of the PIC32MZ Graphics family, offering an integrated 2D Graphics Processor Unit (GPU), a DDR2 DRAM controller for externally addressable memory, and a 12-bit ADC module rated at 18 MSPS with up to 45 analog inputs. A microcontroller (MCU) is a self-contained computer on a single chip that integrates a CPU core, program memory, data memory, and configurable peripherals. The PIC32MZ1025DAR169-I/6J sits in the 32-bit MCU hierarchy: MIPS32 microAptiv core -> PIC32MZ 32-bit MCU -> graphics-capable MCU -> embedded system-on-chip. Unlike a general-purpose MPU, it boots directly from on-chip Flash and requires no external memory to run, while the integrated DDR2 controller lets designers add 32 MB or 128 MB of external DRAM for frame buffers and rich GUI content. Key differentiators include the 200 MHz core delivering 330 DMIPS, the integrated graphics pipeline that offloads rendering from the CPU, 640 KB of on-chip SRAM, and a rich peripheral set spanning CAN, HS USB, Ethernet MAC, and multiple serial interfaces. The 169-ball LFBGA package provides high I/O density for display, memory, and connectivity interfaces in a compact 11x11 mm footprint. The device targets embedded GUI applications such as industrial HMI panels, medical instrumentation displays, automotive cluster and infotainment modules, and IoT gateways that require both real-time control and graphical output. Its 1.7 V to 1.9 V core supply and wide -40C to +85C industrial temperature range suit space-constrained, thermally challenging designs. When designing with this MCU, pay close attention to the DDR2 routing, the analog supply filtering for the 12-bit ADC, and the BGA land pattern and via-in-pad requirements. The integrated graphics controller reduces BOM cost by eliminating a discrete display controller, but requires careful frame-buffer bandwidth planning. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for selection, sourcing, and layout decisions.

Angebot Kontakt

PIC32MZ1025DAR169-V/6J

PIC32MZ1025DAR169-V/6J - 200MHz 32-bit MCU with DDR2 & GPU | Microchip

The Microchip Technology PIC32MZ1025DAR169-V/6J is a high-performance 32-bit MIPS-based microcontroller from the PIC32MZ Graphics (DA) family, featuring a MIPS32 microAptiv core running at 200 MHz, 1 MB of Flash, 640 KB of SRAM, and an integrated 2D Graphics Processing Unit (GPU) plus Graphics Controller, packaged in a 169-ball 11x11 mm LFBGA. The /6J suffix indicates a 169-ball LFBGA, while the V-temperature grade is -40C to +125C for industrial/automotive-style use cases. The part targets applications that demand MPU-like performance with MCU-level integration, including Human-Machine Interface (HMI) panels, industrial control dashboards, and graphics-rich embedded displays. What is a PIC32MZ DA-series microcontroller? It is a class of 32-bit MIPS microcontrollers from Microchip that combines a high-speed CPU, large memory, DDR2 DRAM controller, LCD graphics controller, GPU, 12-bit ADC, USB, CAN, and Ethernet peripherals into a single chip, enabling HMI designs without an external MPU. It sits in the taxonomy: PIC32MZ -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. Key features highlighted in the verified data include a 2 MB Flash maximum (1 MB on this -1025 variant), 640 KB of SRAM, stacked DDR2 with 32 MB or 128 MB external addressable DRAM support, integrated Graphics Controller and Graphics Processor, a 12-bit 18 MSPS ADC with up to 45 analog inputs, and on-chip HS USB plus CAN. The 200 MHz core delivers 252 DMIPS / 3.28 CoreMarks per MHz-class throughput for graphics and DSP tasks. The architecture uses a 32-bit MIPS microAptiv core with MMU and DSP ASE extensions, paired with a dedicated 2D GPU that accelerates block transfer, alpha blending, color conversion, image scaling, and text rendering. The DDR2 controller supports LPDDR and stacked-package DDR2, eliminating the need for an external memory bus. Peripherals include up to six UART, three or four SPI, five I2C, two CAN, HS USB 2.0 host/device/OTG, 10/100 Ethernet MAC, and a 12-bit 18 MSPS ADC. Typical applications are industrial HMI touch panels, automotive cluster/instrument displays, point-of-sale terminals with GUI, medical patient monitors, and any embedded GUI on TFT-LCD panels up to WVGA. The 169-ball LFBGA at 11x11 mm is the largest pin-count option in the family, maximizing GPIO for parallel RGB/8080 display interfaces. When designing with this part, allow sufficient BGA escape routing on the PCB, follow Microchip's DDR2 layout guide for the stacked-DDR2 variant, and use MPLAB Harmony 3 for peripheral and graphics stacks. The V-temperature grade requires junction-temperature monitoring if the device is mounted in a sealed enclosure with limited airflow. This page synthesizes distributor pricing, same-family drop-in alternatives, and design guidance not consolidated on the manufacturer datasheet landing page.

Angebot Kontakt

PIC32MZ1025DAR169T-I/6J

PIC32MZ1025DAR169T-I/6J - 200MHz 32-bit MCU, 1MB Flash, 169-LFBGA | Microchip

The Microchip PIC32MZ1025DAR169T-I/6J is a 32-bit MIPS32 microAptiv-based microcontroller from the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, integrating 1MB of Flash, 640KB of SRAM, a 200 MHz CPU core, an integrated Graphics Controller with GPU, and a 12-bit 18 MSPS ADC with up to 45 analog inputs, in a 169-pin LFBGA (11x11) package. The 'T' suffix denotes tape-and-reel packaging and 'I' indicates the industrial -40C to +85C operating temperature range, while '/6J' specifies the 169-ball LFBGA package option. A 32-bit microcontroller (MCU) is an integrated circuit containing a high-performance processor core, program memory, data memory, and a rich set of peripherals on a single die, designed for embedded applications requiring complex computation, real-time control, and human-machine interface (HMI) capabilities. The PIC32MZ Graphics family targets graphical user interface (GUI) applications with MPU-class performance while preserving the deterministic real-time behavior of an MCU, sitting at the top of the PIC32 hierarchy above PIC32MX and below 32-bit application processors. Key differentiating specifications include: 200 MHz CPU clock (330 DMIPS / 794 CoreMark class performance), 1MB Flash with live update support, 640KB SRAM, integrated Graphics Controller and Graphics Processor for driving TFT LCDs without external GPU hardware, 12-bit 18 MSPS ADC with up to 45 analog input channels, on-chip 32MB or 128MB externally addressable DDR2 DRAM controller, and High-Speed USB 2.0 plus CAN-FD connectivity. The 169-pin LFBGA package exposes extensive GPIO, multiple SPI/I2C/UART, and a dedicated external bus interface (EBI) for graphics memory and SDRAM. The device is built on a single-chip CMOS process and integrates a dedicated 2D Graphics Processing Unit (GPU) that accelerates rendering of fonts, block transfers, alpha blending, and image decoding directly in hardware. This offloads CPU cycles normally consumed by frame-buffer manipulation, enabling smooth GUI refresh on WVGA-class displays at low CPU loading. Typical applications include industrial HMI panels, medical patient monitoring displays, home appliance touch-screen controllers, automotive infotainment/cluster displays, smart-home control hubs, and any MCU-based product that needs a colour TFT LCD without the BOM cost of an external MPU plus discrete GPU. The integrated DDR2 controller also makes it suitable for products that require large frame buffers for high-resolution displays. Design considerations: the LFBGA-169 package requires via-in-pad or standard fanout PCB technology with controlled-impedance routing for DDR2 signals. Decoupling per the manufacturer reference design is essential, and the EBI/DDR2 traces must be length-matched to the DDR2 specification. Use the MPLAB Harmony Configurator (MHC) to generate the DDR2 timing configuration for the chosen SDRAM. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a single source for sourcing and design-in decisions on the PIC32MZ1025DAR169T-I/6J.

Angebot Kontakt

PIC32MZ1025DAR176-V/2J

PIC32MZ1025DAR176-V/2J - 200MHz MCU, 1MB Flash, 176-LQFP | Microchip

The Microchip Technology PIC32MZ1025DAR176-V/2J is a 32-bit MIPS32 microAptiv PIC32MZ DAR graphics microcontroller operating at 200 MHz with 1 MB of on-chip Flash and a stacked DDR2 memory interface, housed in a 176-pin LQFP package (20x20 mm). It belongs to the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, which delivers MPU-class performance with MCU-class design simplicity for graphical HMI and connected-embedded applications. What is a 32-bit graphics microcontroller? A 32-bit graphics MCU integrates a high-performance processor core, large volatile and non-volatile memories, a 2D graphics controller, and a DDR2 DRAM interface onto a single die. Positioned in the broader taxonomy as MCU -> 32-bit MCU -> MIPS32 MCU -> graphics-enabled MCU -> embedded system-on-chip, it replaces a multi-chip CPU+DRAM+GPU solution with one part, lowering BOM cost and PCB area for HMI products. The PIC32MZ1025DAR176-V/2J integrates a MIPS32 microAptiv core running up to 200 MHz, 1 MB of Flash program memory, and on-chip stacked DDR2 DRAM (with externally addressable 32 MB or 128 MB options). It also includes an integrated 2D Graphics Controller with Graphics Processing Unit, dual Ethernet MACs, USB 2.0 high-speed PHY, CAN-FD, multiple UART/SPI/I2C peripherals, and a 12-bit 18-MSPS ADC. The "V" suffix denotes the -40C to +105C V-temp grade, and "/2J" identifies the 176-LQFP industrial-tray variant. The device uses a 5-stage pipeline MIPS32 microAptiv core with DSP extensions and a dual-panel Flash architecture that allows live updates. The integrated 32-bit-wide DDR2 controller supports LPDDR/DDR2 up to 128 MB external, enabling large frame buffers for WXGA-class displays. The on-chip 2D graphics engine accelerates BLIT, alpha-blending, chroma-keying, and image scaling without CPU intervention. Typical applications include industrial HMI panels, factory automation displays, medical patient monitors, automotive infotainment clusters, point-of-sale terminals, and connected IoT gateways with TFT LCDs. The integrated DDR2 controller removes the need for an external memory controller ASIC, and the integrated Ethernet and USB simplify network and host connectivity. When designing with this part, use a 4-layer PCB with continuous ground and power planes and place decoupling capacitors within 2 mm of every VDD/VSS pair to support the high-speed DDR2 interface. Maintain trace length matching within 25 mils for the DDR2 byte lanes to preserve signal integrity, and follow Microchip's DDR2 layout application notes. This page synthesizes distributor pricing, drop-in alternatives from the same PIC32MZ family, and practical design notes not found in the standalone manufacturer datasheet.

Angebot Kontakt

PIC32MZ1025DAR176T-V/2J

PIC32MZ1025DAR176T-V/2J - 200MHz MCU, 1MB Flash, Graphics + DDR2 | Microchip

The Microchip PIC32MZ1025DAR176T-V/2J is a 32-bit MIPS microAptiv-based microcontroller from the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, operating at up to 200 MHz with 1 MB Flash and 640 KB SRAM in a 176-pin LQFP (20x20 mm) package. The -V suffix designates the V-temp grade (-40C to +105C) suitable for industrial and automotive-grade GUI designs, and the /2J tape-and-reel suffix indicates packaging format. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals (timers, ADC, communication controllers, GPIO) on one die. Within the broader taxonomy, the PIC32MZ DA family sits at the intersection of microcontroller -> 32-bit MCU -> MIPS-based MCU -> graphics-capable MCU, bridging MCU ease-of-use and MPU-class performance for embedded HMI (human-machine interface) workloads. Key features include an integrated 2D Graphics Controller and Graphics Processor for hardware-accelerated rendering, stacked DDR2 DRAM (32 MB or 128 MB options) for large display framebuffers, a 12-bit 18 MSPS ADC with up to 45 analog inputs, High-Speed USB 2.0, CAN, and multiple serial interfaces. The 200 MHz core delivers 410 DMIPS / 3.28 CoreMark/MHz performance suitable for HMI, industrial control, and gateway nodes. Architecturally, the PIC32MZ DA family pairs the MIPS32 microAptiv core with a dedicated graphics pipeline (BLT, fill, stretch, transparency) and an external DDR2 memory controller, allowing designers to drive TFT LCD panels up to WVGA resolution without an external graphics controller IC. A 32-channel DMA engine offloads data movement from the CPU. Typical applications include industrial HMI panels, medical patient monitors, home-appliance graphical user interfaces, in-flight entertainment remotes, and automotive dashboard prototypes. The wide operating temperature range and automotive-grade option make it suited for harsh-environment deployments. When designing with this device, allocate adequate PCB area for the LQFP-176 footprint and follow the DDR2 routing guidelines in the family reference manual; signal integrity on the DDR2 bus is the most common pitfall. Provide a clean 3.3 V rail with bulk decoupling near the MCU and DDR2 supply pins. This page synthesizes distributor pricing, drop-in same-family alternatives from the Microchip PIC32MZ DA family, and practical design notes beyond the manufacturer datasheet to accelerate your embedded GUI design.

Angebot Kontakt

PIC32MZ1025DAS169-I/6J

PIC32MZ1025DAS169-I/6J - 32-bit 200MHz MCU, 1MB Flash, 169-LFBGA | Microchip

The Microchip PIC32MZ1025DAS169-I/6J is a 32-bit MIPS32 microAptiv PIC32MZ DAS graphics microcontroller IC operating at 200 MHz with 1MB (1M x 8) of Flash program memory and 169 pins in an 11x11 mm LFBGA package. It belongs to the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, which integrates an on-chip DDR2 DRAM controller (supporting up to 128 MB externally addressable DDR2), a Graphics Controller, and a dedicated Graphics Processor to deliver MPU-class performance with MCU-class ease of design for GUI applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die, enabling compact embedded designs. The PIC32MZ1025DAS169-I/6J sits within the PIC32MZ graphics hierarchy: 32-bit MCU -> MIPS32 microAptiv core -> PIC32MZ family -> PIC32MZ DAS graphics subfamily -> high-integration graphics controller with stacked DDR2. It also includes a 12-bit 18 MSPS ADC module with up to 45 analog inputs, plus CAN and High-Speed USB interfaces for industrial and automotive HMI designs. Key differentiating features of this part include 1MB Flash and 640KB SRAM, an integrated LCD TFT controller with hardware graphics processing, up to 45 analog channels for sensor aggregation, and High-Speed USB plus CAN for industrial networking. The 169-LFBGA package offers high pin density for designs that need many simultaneous peripherals and large parallel display buses. The architecture uses the MIPS32 microAptiv core running at 200 MHz with a 5-stage pipeline, an integrated DDR2 controller that lets the chip address 32MB or 128MB of external DDR2 memory, and a dedicated GPU block for accelerated 2D rendering. Hardware crypto and a true random number generator are also available on this family. Typical applications include industrial HMI panels, automotive dashboard displays, medical GUI devices, IoT gateways with rich graphics, and point-of-sale terminals. Designers choose this part when they need integrated DDR2 support plus graphics acceleration without an external MPU plus external DDR combination. When designing with this part, plan the PCB for the LFBGA fan-out carefully and ensure DDR2 trace lengths are matched per the JEDEC DDR2 specification. The DDR2 controller reduces BOM but the routing rules are tighter than for parallel SRAM, so allocate margin in the PCB stack-up. This page synthesizes DigiKey and Mouser distributor pricing, Microchip same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Angebot Kontakt

PIC32MZ1025DAS169T-I/6J

PIC32MZ1025DAS169T-I/6J - 32-bit 200MHz MCU 1MB Flash 169-LFBGA

The Microchip Technology PIC32MZ1025DAS169T-I/6J is a 32-bit MIPS32 microAptiv PIC32MZ DAS microcontroller integrating 1MB (1M x 8) of Flash program memory with a 200 MHz core clock, supplied in a 169-ball LFBGA package measuring 11x11 mm with 0.8 mm pitch. The 'DAS' variant is part of the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, which is positioned as an MCU delivering MPU-class performance for graphical user-interface (GUI) designs while preserving MCU ease-of-use. A PIC32MZ microcontroller is a 32-bit MIPS-class MCU designed for embedded applications that require high computational throughput, large memory footprints, and rich peripheral integration. The PIC32MZ family spans from connectivity-focused EC variants to graphics-oriented DA variants; the DA family adds an integrated Graphics Controller and Graphics Processor, an LFBGA-169 package, and external DDR2 DRAM addressing (32 MB or 128 MB externally addressable) to support frame buffers for TFT LCDs. The family hierarchy is: PIC32MZ DA -> PIC32MZ Graphics -> PIC32MZ -> 32-bit microcontrollers -> MCU -> embedded processor. Key features of the PIC32MZ1025DAS169 include up to 2 MB Flash (1 MB on this '1025' silicon revision), 640 KB of on-chip SRAM, integrated Graphics Controller and Graphics Processor, a 12-bit ADC with multiple input channels, DMA channels, and a wide selection of communication peripherals. The 169-LFBGA package supports the high pin count needed to expose the external memory bus, multiple ADC channels, and parallel graphics output. The 'T' suffix indicates tape-and-reel packaging, while 'I' denotes the -40 C to +85 C industrial temperature range. Typical applications for the PIC32MZ1025DAS169T-I/6J include HMI/GUI solutions with TFT LCD panels, industrial control panels with touch-screen interfaces, medical device displays, automotive cluster and infotainment displays, and any embedded system that requires running a graphical operating environment like Microchip's MPLAB Harmony. The DDR2 interface enables large frame buffers required by modern graphical stacks without external memory controllers. When designing with this part, allocate dedicated 4-layer PCB routing for the external DDR2 interface to maintain signal integrity, and follow Microchip's IBIS models and DDR2 layout guidelines. Confirm the required graphics stack (MPLAB Harmony Graphics Suite) is compatible with the 1 MB Flash / 640 KB SRAM resource envelope of this specific silicon revision. Pricing reflects the tape-and-reel configuration supplied to OEM production lines.

Angebot Kontakt

PIC32MZ1025DAS176-I/2J

PIC32MZ1025DAS176-I/2J - 32-bit 200MHz MCU, 176-LQFP | Microchip

The Microchip Technology PIC32MZ1025DAS176-I/2J is a 32-bit MIPS32 microAptiv PIC32MZ DAS microcontroller IC delivering 200MHz core performance with 1MB (1M x 8) of on-chip Flash and DDR2 external memory controller support, housed in a 176-pin LQFP (20x20mm) package with exposed thermal pad. This device is part of the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family engineered for MPU-class GUI workloads while retaining the simplicity of an MCU development flow. A 32-bit microcontroller (MCU) is an integrated computing device that combines a processor core, program memory, data memory, and a rich set of peripherals on a single silicon die. The PIC32MZ DAS family extends this concept by integrating a Graphics Controller, Graphics Processor, 12-bit 18 MSPS ADC with up to 45 analog inputs, HS USB, CAN, and an external DDR2 DRAM interface capable of addressing up to 128MB of external memory. These features position the family at the boundary between microcontroller and microprocessor, hence the Microchip positioning of "MPU-like performance with MCU ease of design." Key features of the PIC32MZ1025DAS176-I/2J include 1MB Flash / 256KB SRAM in this -I/2J SKU within the DAS graphics sub-family, a MIPS32 microAptiv core running at 200MHz, and DDR2 DRAM external bus support that scales to 32MB or 128MB depending on board population. Integrated peripherals include a Graphics LCD Controller, High-Speed USB 2.0 OTG, two CAN 2.0b controllers, and the 12-bit 18 MSPS ADC with up to 45 analog inputs cited in the family datasheet. The 176-LQFP package exposes the full external memory bus plus rich I/O for parallel graphics panels, making it the preferred footprint when a TFT-LCD is hard-mounted on the same PCB. Architecturally, the PIC32MZ DAS relies on a multi-layer AHB/APB bus matrix to feed the GPU, LCD controller, and DMA channels from Flash and external DDR2 without stalling the CPU. Compared with the EF (Ethernet) variants, the DAS parts sacrifice Ethernet MACs for graphics IP, while sharing the same core, Flash size tier, and package pinout across DAK/DAL/DAR/DAS suffixes. This commonality enables a single PCB layout to serve GUI vs. connectivity variants by changing only the populated MCU. Typical applications span industrial HMI panels, automotive infotainment, point-of-sale terminals, medical patient monitors, and IoT gateways with a built-in display. The 200MHz core plus dedicated graphics pipeline and the 176-pin LQFP package make it a strong fit for mid-resolution TFT-LCD designs where BOM and board area must remain conservative. When designing with the PIC32MZ1025DAS176-I/2J, ensure the DDR2 routing follows the family reference design's length-matched impedance rules, since the external bus is the performance bottleneck. The -I industrial temperature grade (-40C to +85C) is suitable for most HMI enclosures; step up to -V for -40C to +105C automotive cabins. This page synthesizes distributor stock, drop-in cross-references and a parametric comparison that goes beyond the manufacturer datasheet, helping procurement and design engineers evaluate the PIC32MZ1025DAS176-I/2J for new GUI product designs.

Angebot Kontakt

PIC32MZ1025DAS176T-I/2J

PIC32MZ1025DAS176T-I/2J - 200MHz 32-bit MCU w/ GPU, 1MB Flash, 176-LQFP | Microchip

The Microchip PIC32MZ1025DAS176T-I/2J is a high-performance 32-bit MIPS32 microAptiv PIC microcontroller in the PIC32MZ DA (Graphics) family, integrating an integrated Graphics Controller and Graphics Processor with 1MB of Flash and 640KB of SRAM in a 176-pin LQFP (20x20 mm) package. It operates at 200MHz core speed and supports external DDR2 DRAM of 32MB or 128MB, delivering MPU-class performance with MCU-class ease-of-use for graphical human-machine-interface (HMI) designs. What is a PIC32MZ DA microcontroller? The PIC32MZ DA family is Microchip's highest-integration PIC32 family, designed for embedded GUI applications. It combines a MIPS32 microAptiv core (an industry-standard 32-bit RISC architecture used in routers, set-top boxes, and other high-volume devices) with on-chip 2D graphics acceleration and an external DDR2 memory controller, filling the gap between traditional microcontrollers (single-chip simplicity) and application processors (richer graphics stacks requiring external OS). It is a member of the broader microcontroller (MCU) class of semiconductor devices. Key features include 1MB (1M x 8) Flash program memory, 640KB SRAM, support for 32MB or 128MB external DDR2 DRAM, an integrated Graphics Controller with 2D engine, an integrated Graphics Processor for image compositing, a 12-bit 18 MSPS ADC with up to 45 analog inputs, a 2-bit graphics pipeline, USB 2.0 High-Speed, CAN, and multiple UART/SPI/I2C interfaces. The 176-LQFP package includes an exposed thermal pad and provides 168 GPIO-capable pins for system expansion. Architecturally, the device pairs a 32-bit MIPS microAptiv CPU running at 200MHz (5.06 DMIPS/MHz) with a hardware 2D graphics engine, dedicated DDR2 controller (16-bit data bus), and a wide peripheral set including 12-bit 18MSPS ADC, HS USB OTG, dual CAN 2.0b, and Ethernet. This integration eliminates the need for an external graphics controller ASIC or large SRAM buffer, simplifying BOM and PCB complexity for TFT-LCD HMI panels. Typical applications include industrial HMI panels with TFT-LCD displays, home-automation touch panels, automotive infotainment cluster displays, medical device GUI screens, and POS/kiosk terminals. The integrated graphics engine accelerates 2D rendering, freeing the CPU for application logic and communication stacks. Design consideration: The external DDR2 memory controller requires careful PCB layout with matched-length traces, controlled impedance (50 ohms typical for single-ended DDR2), and proper decoupling to maintain signal integrity at 200MHz. Designers should consult the PIC32MZ DA Family Reference Manual for DDR2 routing guidelines and reference schematics. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical PCB/thermal design notes that supplement the manufacturer datasheet.

Angebot Kontakt

PIC32MZ1025DAS176T-V/2J

PIC32MZ1025DAS176T-V/2J - 200MHz MCU, 1MB Flash, Graphics+32MB DDR2 | Microchip

The Microchip Technology PIC32MZ1025DAS176T-V/2J is a high-performance 32-bit MIPS32 microAptiv PIC32MZ DAS microcontroller with integrated graphics controller, graphics processor, and a stacked 32MB DDR2 DRAM, delivering up to 200 MHz core speed in a 176-pin LQFP (20x20 mm) package. It integrates 1MB of Flash program memory, 256K x 8 SRAM (640KB family-max), and a 12-bit 18 MSPS ADC module with up to 45 analog inputs, plus CAN and High-Speed USB interfaces. The "V" suffix indicates the V-temp operating range of -40C to +105C, and "T" denotes Tape & Reel packaging. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. The PIC32MZ DAS family sits in the high-performance tier of 32-bit MCUs, combining an MPU-class MIPS core with an integrated 2D graphics controller and DDR2 memory interface. This architecture targets graphical user interface (GUI) applications where discrete MPU + external memory + external LCD controller designs would otherwise inflate BOM cost and PCB area. Hypernyms: MCU -> 32-bit microcontroller -> embedded processor -> semiconductor IC. Key differentiating features include the integrated DDR2 memory controller (eliminating external SDRAM glue logic), hardware 2D graphics accelerator (reducing CPU overhead for rendering), HS USB 2.0 with integrated PHY, and a 200 MHz/330 DMIPS core. Compared with bare-metal PIC32MX parts, the DAS variant reduces system cost for HMI designs by absorbing graphics, DRAM, and high-speed connectivity into one package. The 45-channel 12-bit 18 MSPS ADC is the fastest in the PIC32 family, enabling high-speed sensor acquisition without an external ADC. Typical applications include industrial HMI panels with TFT LCDs, automotive instrument clusters, medical patient monitors with GUI, point-of-sale terminals, and home automation touch-screen controllers. Designers choose this part when the design needs a smooth GUI rendering on 4-7 inch displays, an external frame buffer in DDR2, and CAN/USB connectivity for industrial networking. When designing with the PIC32MZ1025DAS176T-V/2J, ensure the DDR2 trace lengths are length-matched per JEDEC DDR2 specifications and that the LQFP-176 thermal pad (if any) is soldered for proper heat dissipation. Programming is supported via MPLAB X IDE with MPLAB Harmony framework; third-party display drivers and graphics middleware from Microchip accelerate GUI development.

Angebot Kontakt

PIC32MZ1064DAA169-I/HF

PIC32MZ1064DAA169-I/HF - 200MHz 32-bit MCU, 1MB Flash, Graphics | Microchip

The Microchip Technology PIC32MZ1064DAA169-I/HF is a high-performance 32-bit MIPS microAptiv microcontroller from the PIC32MZ Graphics (DA) family, running at 200 MHz (330 DMIPS), with 1 MB of Flash and 640 KB of SRAM, integrated in a 169-pin LFBGA (11x11 mm) package. The device includes a Memory Management Unit (MMU), a dedicated Graphics Controller and Graphics Processor, a 12-bit 18 MSPS ADC with up to 45 analog input channels, dual-panel Flash for live-update support, microMIPS compressed mode for up to 35% smaller code, and external DDR2 memory addressing for up to 128 MB of off-chip DRAM. A 32-bit microcontroller (MCU) is an integrated microprocessor core, memory, and peripherals on a single die, designed to execute embedded firmware in real time. The PIC32MZ DA family specifically targets graphical Human-Machine Interface (HMI) applications where MPU-class performance is needed but with MCU-class code simplicity. In the broader taxonomy, this part belongs to: microcontroller -> embedded MCU -> 32-bit MIPS MCU -> graphics-enabled MCU -> PIC32MZ DA family, and integrates into the wider category of semiconductor -> integrated circuit (IC) -> embedded processor. Key differentiating features include 200 MHz / 330 DMIPS performance with hardware FPU, dual-panel Flash supporting live firmware updates without downtime, an integrated Graphics Processing Unit (GPU) and Graphics Controller for driving LCD panels without external graphics silicon, a high-speed 12-bit ADC capable of 18 MSPS for motor-control and instrumentation sampling, and a rich set of connectivity peripherals including HS USB, CAN, and multiple UART/SPI/I2C. Together these features let a single chip replace the MCU + external graphics controller + DDR memory interface typical of competing designs. Typical applications span industrial HMI panels, automotive instrument clusters, medical patient monitors, smart-home control touchscreens, point-of-sale terminals, and factory automation HMIs. The wide operating voltage range of 1.7 V to 3.6 V and the 169-pin BGA expose enough I/O for parallel RGB displays, capacitive touch controllers, and multiple communication buses simultaneously. When designing with this part, plan PCB layout for the 11x11 mm BGA land pattern with adequate via-in-pad or dog-bone fanout to meet DDR2 signal-integrity rules. Use Microchip's MPLAB Harmony configuration to bring up the Graphics Processor and DDR2 controller, and follow the AN1388 layout application note for the LFBGA escape routing.

Angebot Kontakt

PIC32MZ1064DAA176T-I/2J

PIC32MZ1064DAA176T-I/2J - 200MHz 32-Bit MCU 1MB Flash LQFP-176 | Microchip

The Microchip PIC32MZ1064DAA176T-I/2J is a high-performance 32-bit MIPS32 microAptiv microcontroller from the PIC32MZ Graphics (DA) family, operating at up to 200 MHz with 1 MB of Flash and 640 KB of SRAM in a 176-pin LQFP (20x20 mm) package. The device integrates a dedicated Graphics Controller and Graphics Processor for GUI designs, an integrated DDR2 DRAM controller supporting up to 128 MB of external DDR2, and rich connectivity including USB, CAN, Ethernet, and multiple serial interfaces. A 32-bit microcontroller (MCU) is a single-chip computer integrating a 32-bit CPU core, Flash program memory, SRAM data memory, peripherals, and interrupt logic. The PIC32MZ DA family targets graphical embedded applications by combining MPU-class performance with MCU-class integration, sitting in the hierarchy as: 32-bit MCU -> MIPS-based microcontroller -> PIC32 family -> Microchip PIC portfolio. The DAA176 variant specifically targets designs that need an integrated graphics pipeline without the larger external memory interfaces of the DAH or DAL variants. Key differentiating features include 1 MB on-chip Flash (1M x 8 organization), 640 KB SRAM, a 12-bit ADC, multiple timer/counter modules, and a graphics acceleration block capable of driving TFT LCD panels directly. The 200 MHz core delivers 330 DMIPS and 3.28 CoreMarks/MHz, while hardware cryptographic accelerators support AES, SHA, and RNG for secure connectivity. Operating voltage is 1.8V core / 3.3V I/O with industrial temperature range -40C to +85C. The PIC32MZ1064DAA176T-I/2J uses the MIPS32 microAptiv core with dual-issue pipeline, MMU, and DSP extensions, enabling signal processing and RTOS workloads. The integrated DDR2 controller up to 32 MB external DDR2 supports high-bandwidth framebuffer operations for graphics applications, while the on-chip 32 MB DDR option provides zero-external-memory BOM in space-constrained designs. Typical applications include industrial HMI panels with TFT LCD, automotive infotainment displays, medical patient monitors with graphical readouts, point-of-sale terminals, and any GUI-driven embedded system where MPU-class performance and low BOM cost are both priorities. The 176-pin LQFP package is reflow-solderable on standard 4-layer PCBs and supports JTAG/SWD debugging via Microchip's MPLAB tools. When designing with this device, ensure the 3.3V and 1.8V rails are derived from a common source with proper sequencing - the integrated POR and BOR circuits manage brown-out, but external capacitors on the VCAP pins are mandatory for internal core regulation. Engineers should plan DDR2 routing carefully using Microchip's reference layouts to meet the DDR2 signal-integrity requirements. This page synthesizes distributor pricing, same-brand pin-compatible alternatives within the PIC32MZ DA family, cross-package design notes, and design guidance not consolidated on the manufacturer product page.

Angebot Kontakt

PIC32MZ1064DAA288-I/4J

PIC32MZ1064DAA288-I/4J - 200MHz MCU 1MB Flash 288-LFBGA | Microchip

The Microchip Technology PIC32MZ1064DAA288-I/4J is a 32-bit MIPS32 microAptiv PIC32MZ DA-series microcontroller integrating an integrated Graphics Controller and Graphics Processor, 1MB of Flash, 640KB of SRAM, and a 12-bit 18 MSPS ADC with up to 45 analog inputs, all in a 288-pin LFBGA (15x15 mm) package. It operates at up to 200 MHz core clock with support for an externally addressable DDR2 DRAM interface (32MB or 128MB options) for frame-buffer applications. A PIC32 microcontroller is a 32-bit RISC MCU based on the MIPS microAptiv architecture, designed to combine MPU-class compute performance with the determinism, low power, and ease-of-use of a microcontroller. The PIC32MZ DA family specifically targets cost-effective Graphical User Interface (GUI) designs with on-chip graphics peripherals that traditionally required a separate MPU plus external GPU, allowing a single-chip solution for HMI panels. Key features include 1MB of Flash program memory (1M x 8), 640KB of SRAM, a 200 MHz core, USB 2.0 High-Speed On-The-Go, dual CAN modules, 12-bit 18 MSPS ADC, integrated Graphics Processing Unit (GPU) and Graphics Controller, and an external DDR2 DRAM controller that supports frame-buffer memory up to 128MB. These features reduce external component count in cost-sensitive GUI designs. The device uses a 5-stage MIPS32 microAptiv pipeline with DSP extensions, providing deterministic interrupt latency and hardware multiply/divide. The integrated Graphics Controller drives TFT panels directly through the Parallel Master Port (PMP) and External Bus Interface (EBI), while the GPU accelerates primitives like line draw, rectangle fill, blit, and alpha blending without CPU intervention. This offloads the CPU for application logic and communication stacks. Typical applications include industrial HMI panels, home appliance user interfaces, automotive instrument clusters, medical device GUI displays, point-of-sale terminals, and any embedded system requiring a TFT display with touch input. The dual CAN interfaces and HS USB simplify connectivity in industrial and automotive environments, while the large 1MB Flash supports full graphics stacks and localized UI assets. When designing with this device, route the DDR2 interface with matched-length traces and a controlled-impedance stack-up; the DDR2 clock and DQS signals are sensitive to skew. Use the Microchip MPLAB Harmony 3 configuration to bring up the Graphics Controller, PMP timing, and ADC together to avoid peripheral initialization order issues. This page synthesizes distributor pricing, drop-in alternatives within the same PIC32MZ DA family, and practical design notes that the manufacturer datasheet alone does not consolidate, giving engineers a faster selection and qualification path.

Angebot Kontakt

PIC32MZ1064DAA288T-I/4J

PIC32MZ1064DAA288T-I/4J - 200MHz 32-bit Graphics MCU, 1MB Flash | Microchip

The Microchip Technology PIC32MZ1064DAA288T-I/4J is a high-performance 32-bit MIPS32 microAptiv graphics microcontroller delivering 200 MHz CPU performance, 1 MB of Flash, and 640 KB of SRAM in a 288-pin LFBGA (15x15 mm) package. The T suffix denotes Tape & Reel packaging and the I/4J suffix designates the industrial operating temperature range and BGA ball layout. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a high-performance processor core, Flash program memory, SRAM data memory, and a rich set of peripherals (ADC, timers, communication controllers, and graphics blocks). Within the broader taxonomy, the PIC32MZ DA family sits in the Graphics MCU segment, bridging the gap between traditional microcontrollers and microprocessors by integrating an on-chip graphics controller, GPU acceleration, and external DDR2 DRAM addressing of up to 128 MB. Key features include a 32-bit MIPS M-Class core with FPU and DSP extensions, 1 MB Flash, 640 KB SRAM, a 12-bit 18 MSPS ADC with up to 45 analog inputs, integrated LCD controller, graphics processor, High-Speed USB, and CAN. The integrated DDR2 controller supports up to 128 MB external memory, removing the need for an external SDRAM chip in cost-sensitive designs. The PIC32MZ1064DAA288T-I/4J is engineered for advanced human-machine interface (HMI) products, combining MPU-class computational throughput with the simplicity of an MCU toolchain. The 200 MHz core with 16 KB instruction cache accelerates pixel processing, while the integrated display pipeline drives TFT panels without burdening the CPU. Typical applications include industrial control HMI panels, automotive instrument clusters, medical device touchscreens, point-of-sale terminals, and home appliance graphical displays. The integrated graphics controller and DDR2 support enable rich color UIs at WXGA and below. When designing with this part, allocate at least four PCB layers for the DDR2 routing and adhere to the BGA escape pattern in the IBIS/SPICE models. Decoupling must include 100 nF capacitors within 2 mm of every power pin. This page synthesizes distributor pricing, drop-in alternatives from the same PIC32MZ DA family, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt

PIC32MZ1064DAB169-I/HF

PIC32MZ1064DAB169-I/HF - 200MHz 32-bit MCU 1MB Flash 169-LFBGA | Microchip

The Microchip Technology PIC32MZ1064DAB169-I/HF is a 32-bit MIPS32 microAptiv microcontroller from the PIC32MZ Graphics (DA) family, integrating 1MB of Flash, 640KB of SRAM, a hardware graphics controller and a 2D graphics processor in a 169-pin LFBGA (11x11 mm) package. It operates at up to 200MHz core frequency and supports an external DDR2 DRAM interface of up to 128MB, providing MPU-class performance with MCU-class ease of design for graphical HMI applications. A 32-bit microcontroller (MCU) is an embedded processor that integrates CPU core, memory, and peripherals on a single die. The PIC32MZ1064DAB169 belongs to the broader taxonomy: 32-bit MCU -> MIPS32 microAptiv core -> PIC32 family -> PIC32MZ Graphics (DA) sub-family -> microcontroller with integrated graphics controller -> embedded system-on-chip for graphical user interfaces. This hierarchy positions the part for human-machine interface (HMI), industrial control and IoT gateway designs where on-chip graphics reduce external component count and BOM cost. Key features include 1MB (1M x 8) Flash program memory, 640KB SRAM, a 12-bit 18 MSPS ADC module with up to 45 analog inputs, dedicated graphics controller and GPU for TFT LCD panels, Hi-Speed USB 2.0, CAN, Ethernet, I2S, and a 1.7V to 3.6V wide operating voltage range. The 169-pin LFBGA package supports the high pin count required for parallel RGB display, external memory bus, and rich peripheral multiplexing while keeping the PCB footprint compact at 11x11 mm. The PIC32MZ1064DAB169 uses the MIPS32 microAptiv single-core architecture with a 5-stage pipeline and MMU/MPU support, enabling deterministic real-time response and full Linux/RTOS compatibility. Its integrated DDR2 controller offloads framebuffer traffic from the core, allowing smooth GUI rendering at WXGA or higher resolutions. Hardware crypto acceleration, secure boot, and a true random number generator support connected and safety-critical deployments. Typical applications span industrial HMI panels, automotive infotainment displays, medical patient monitors, smart-home control hubs, POS terminals and portable medical diagnostics. The combination of graphics, connectivity, and analog integration makes it a fit-anywhere MPU-replacement part for graphical products. When designing with this device, allocate the bottom layer of the PCB to continuous ground pour and stitch vias around the LFBGA perimeter to control simultaneous-switching noise on the parallel RGB bus. Use the MPLAB Harmony Configurator (MHC) for peripheral initialization, and follow the Microchip DDR2 routing guidelines for trace length matching on the 16-bit memory bus. This page consolidates distributor pricing, drop-in alternatives, and practical design guidance not duplicated on the manufacturer product page, giving engineers and buyers a single decision-ready view of the PIC32MZ1064DAB169-I/HF.

Angebot Kontakt

PIC32MZ1064DAB169T-I/HF

PIC32MZ1064DAB169T-I/HF - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1064DAB169T-I/HF is a 32-bit MIPS32 microAptiv PIC32MZ DA Graphics-family microcontroller running at 200 MHz with 1 MB of Flash and 640 KB of SRAM, housed in a 169-pin LFBGA (11x11 mm) package. It targets graphical HMI and GUI applications where it delivers MPU-class performance with MCU-class integration, integrating a Graphics Controller, Graphics Processor, 12-bit 18 MSPS ADC with up to 45 analog inputs, HS USB, CAN, and an external DDR2 DRAM interface supporting up to 128 MB of addressable memory. A PIC32 microcontroller is a 32-bit RISC MCU family from Microchip based on the MIPS architecture (in this case, the microAptiv core) and designed as an extension of the legacy 16-bit PIC24/dsPIC families. PIC32MZ devices sit in the hierarchy Microcontroller -> 32-bit MCU -> MIPS-based MCU -> PIC32MZ DA graphics MCU, providing deterministic real-time performance, large memory headroom, and rich connectivity peripherals (HS USB, Ethernet, CAN, SQI) for embedded graphical, industrial, and connectivity applications. Key features include the 200 MHz core, 1 MB Flash, 640 KB SRAM, integrated DDR2 DRAM controller (32 MB or 128 MB externally addressable), Graphics Controller + Graphics Processor, 12-bit 18 MSPS ADC with up to 45 analog channels, High-Speed USB 2.0 OTG, two CAN modules, and up to 120 GPIO in the 169-ball LFBGA package. The 200 MHz MIPS core delivers 252 DMIPS / 3.28 CoreMarks/MHz-class throughput, and the on-chip graphics pipeline eliminates the need for an external GPU for typical HMI workloads. Typical applications include industrial HMI panels, graphical touch-screen controllers, automotive dashboards, medical device interfaces, point-of-sale terminals, and building-automation control panels. Designers also use the PIC32MZ DA family for SCADA-style operator interfaces, smart energy displays, and any product that needs a TFT/LCD up to WXGA or higher with responsive multi-layer graphics. When designing with this part, ensure the PCB layout supports matched-length impedance-controlled DDR2 signals for the external memory interface. Provide adequate bulk decoupling near the 1.8 V and 3.3 V rails, and respect the LFBGA escape routing rules (microvia or via-in-pad recommended) to maintain SI on parallel busses. The -I/HF temperature suffix indicates industrial -40 C to +85 C operation with lead-free (Pb-free) matte-tin finish.

Angebot Kontakt

PIC32MZ1064DAB176-I/2J

PIC32MZ1064DAB176-I/2J - 200MHz MCU, 1MB Flash, LQFP-176 | Microchip

The Microchip PIC32MZ1064DAB176-I/2J is a high-performance 32-bit MIPS32 microAptiv microcontroller from the PIC32MZ DA family, operating at up to 200 MHz with 1 MB of Flash and 640 KB of SRAM, packaged in a 176-pin LQFP with exposed pad. It integrates a graphics controller and graphics processor, up to 45 analog inputs fed by a 12-bit 18 MSPS ADC, plus CAN and High-Speed USB on-chip peripherals. The part is supplied in industrial temperature grade -40C to +85C and operates from 1.8 V to 3.6 V with 3.3 V typical I/O. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and peripherals (ADC, timers, communication blocks). The PIC32MZ DA series sits in the high-performance tier of Microchip's PIC32 portfolio, targeting MPU-like workloads while preserving the ease of design of an MCU. Within the broader taxonomy, PIC32MZ DA belongs to: microcontroller -> 32-bit MCU -> MIPS-based MCU -> PIC32 family -> PIC32MZ DA sub-family. The DA designation specifically denotes the Graphics and DRAM-enabled variants that integrate LCD-tFT controllers and external DDR2 memory support. Key differentiating specifications include the 200 MHz core, 1 MB Flash, 640 KB SRAM, integrated graphics controller with 2D Graphics Processing Unit (GPU), 12-bit 18 MSPS ADC with up to 45 analog channels, integrated High-Speed USB 2.0 with on-chip PHY, dual CAN 2.0b controllers, and DDR2 memory controller capable of addressing up to 128 MB of external SDRAM. The wide peripheral set is exposed through 120+ GPIO-capable pins on the 176-pin LQFP. Architecturally, the PIC32MZ1064DAB176 uses a 32-bit MIPS32 microAptiv core with a 5-stage pipeline, tightly coupled I-cache/D-cache, dedicated Flash prefetch, and a multi-channel DMA engine. The integrated Graphics Controller includes hardware-accelerated blit, fill, copy, and chroma-key operations, while the parallel master port provides glueless access to external DDR2/LPDDR memory for frame-buffer storage. Typical applications include graphical HMI panels, industrial control touchscreens, medical patient monitoring displays, point-of-sale terminals, automotive instrument clusters, and any embedded product requiring rich color graphics with deterministic real-time control. Design considerations include careful PCB layout of the 176-pin exposed-pad LQFP for thermal dissipation, provision of the external DDR2 memory interface, and observance of Microchip's Harmony and MPLAB Harmony v3 initialization flows.

Angebot Kontakt

PIC32MZ1064DAB176T-I/2J

PIC32MZ1064DAB176T-I/2J - 200MHz MCU 1MB Flash LQFP-176 | Microchip

The Microchip PIC32MZ1064DAB176T-I/2J is a high-performance 32-bit MIPS32 microAptiv PIC microcontroller from the PIC32MZ DA family, featuring a 200 MHz core, 1 MB of Flash, 160 KB of SRAM (typical for this family), and an integrated graphics controller with GPU in a 176-pin LQFP (20x20 mm) package. It targets cost-sensitive GUI and HMI designs by pairing MPU-class performance with the simplicity of an MCU footprint. A 32-bit microcontroller (MCU) is a system-on-chip that integrates a 32-bit processor core, on-chip memory (Flash + SRAM), and a rich set of peripherals (ADC, USB, CAN, timers, I/O). PIC32 MCUs from Microchip use the MIPS32 microAptiv core, which sits in the microcontroller hierarchy below application processors but above 8/16-bit MCUs, giving developers higher code density, faster arithmetic, and direct support for larger RTOS, TCP/IP stacks, and graphical user interfaces. Key differentiating features include the integrated 2D graphics processing unit (GPU) and graphics controller with up to 128 MB of external DDR2 DRAM addressable through the External Bus Interface (EBI), 12-bit 18 MSPS ADC with up to 45 analog inputs, High-Speed USB 2.0, CAN, and a peripheral set aimed at industrial control, automotive dashboards, and graphical embedded products. The 200 MHz core delivers 252 DMIPS and 3.28 CoreMark/MHz, matching many Cortex-M4 implementations while bringing dedicated display pipeline hardware. The device combines a deterministic MIPS microAptiv pipeline with tightly coupled SRAM for low-latency peripheral response. Internal DMA and a dedicated GPU offload rendering tasks from the CPU, allowing 60+ FPS UI updates on WVGA panels with low CPU overhead. The 176-pin LQFP-20x20 footprint also provides generous GPIO and parallel bus pins for memory expansion. Typical applications include industrial HMI panels with TFT-LCD, automotive infotainment entry-level, smart appliance control panels, medical instrument displays, and IoT gateways needing on-chip graphics. The integrated GPU and DDR2 controller make it competitive with higher-priced Cortex-A designs for simple dashboards. When designing with the PIC32MZ1064DAB176T-I/2J, ensure the PCB provides adequate thermal dissipation for the 1W max power budget at 200 MHz, and follow the DDR2 PCB layout guidelines in the datasheet for signal integrity. Use the MPLAB Harmony framework for peripheral drivers and the MPLAB ICD 3 / ICD 4 / PICkit 4 for programming and debugging. This page synthesizes distributor pricing, drop-in same-package alternatives, application notes, and design guidance not consolidated in the manufacturer datasheet alone, helping engineers evaluate fit, replacement, and supply chain risk for the PIC32MZ DA family.

Angebot Kontakt

PIC32MZ1064DAG169-I/6J

PIC32MZ1064DAG169-I/6J - 200MHz 32-bit MCU, 1MB Flash | Microchip

The Microchip Technology PIC32MZ1064DAG169-I/6J is a 200 MHz 32-bit MIPS32 microAptiv microcontroller from the PIC32MZ DA (Graphics) family, integrating 1 MB Flash, 640 KB SRAM, a 12-bit 18 MSPS ADC with up to 45 analog inputs, an integrated 2D Graphics Controller with dedicated Graphics Processor, an HS USB 2.0 transceiver, and a CAN module, housed in a 169-ball LFBGA (11x11 mm, 0.80 mm pitch) package. It operates from 1.7 V to 3.6 V, targets industrial temperature grade (-40C to +85C), and is supplied in tray packaging. A 32-bit microcontroller (MCU) is an integrated processor that combines a CPU core, program and data memory, and a rich set of on-chip peripherals in a single silicon die, forming the highest level of the embedded computing hierarchy: microcontroller -> embedded processor -> semiconductor. The PIC32MZ DA family extends this concept into the application-processor tier by integrating dedicated graphics hardware, high-throughput analog front ends, and external DDR2 DRAM addressing capability (32 MB on-chip window / 128 MB externally addressable), giving designers MPU-class performance with MCU-class ease of use for graphical human-machine interfaces. Key differentiating features include the integrated 2D Graphics Controller with a dedicated GPU, the 12-bit 18 MSPS ADC capable of up to 45 analog input channels, and the on-chip 32 MB / off-chip 128 MB DDR2 DRAM controller. The 169-LFBGA package is required to expose the 120 GPIO pins and the parallel display interface, and the 0.80 mm ball pitch suits 4-layer or higher mainboards with microvia breakout. The device also exposes dedicated crypto/hash and random-number peripherals for secure boot and IP protection flows. Architecturally, the PIC32MZ1064DAG169-I/6J uses the MIPS32 microAptiv core with a 5-stage pipeline, FPU, MMU, and dual-bank Flash with live-update support. The peripheral set is interconnected through a multi-layer AHB/APB bus matrix that allows concurrent USB, graphics, and ADC operation without arbitration stalls. Internal PLLs multiply the external reference to the 200 MHz system clock, and an on-chip 32 kHz oscillator supports low-power modes. Typical applications include 2D GUI / HMI appliances, automotive cluster displays, medical patient monitors, point-of-sale terminals, industrial machine-control touchscreens, and any embedded product requiring a colorful TFT-LCD panel driven by the on-chip GPU. The HS USB and CAN peripherals also make it suitable for connected industrial nodes that bridge a TFT to a CAN-FD or USB host bus. When designing with this MCU, ensure the PCB has matched-length routing for the DDR2 interface and a 6-layer stack-up to keep impedance under control; the 0.80 mm pitch LFBGA demands microvia or laser-drilled vias at the breakout, and the ADC's 18 MSPS rate requires an anti-aliasing front-end RC network for accurate conversions above 5 MHz analog bandwidth. Decoupling follows the standard 100 nF per power pin plus 4.7 uF bulk arrangement recommended in the device family reference manual. This page synthesizes distributor pricing (DigiKey, LCSC, Hotenda), drop-in alternatives inside the same 169-LFBGA footprint, and practical design notes that go beyond the manufacturer datasheet, including selection guidance against other PIC32MZ DA and PIC32MX parts.

Angebot Kontakt

PIC32MZ1064DAG176T-I/2J

PIC32MZ1064DAG176T-I/2J - 200MHz 32-Bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1064DAG176T-I/2J is a high-performance 32-bit MIPS32 microAptiv PIC microcontroller from the PIC32MZ DA graphics-enabled family, running at 200 MHz with 1 MB of Flash and a 176-pin LQFP (20x20 mm) exposed-pad package. It is designed for embedded GUI designs, integrating a graphics controller, graphics processor, 12-bit 18 MSPS ADC with up to 45 analog inputs, Hi-Speed USB, and CAN, plus external DDR2 DRAM addressing up to 128 MB. Operating voltage spans 2.0-3.6 V with an industrial -40C to +85C temperature window. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on one die. Within the semiconductor taxonomy, an MCU belongs to integrated circuits -> microcontrollers -> 32-bit microcontrollers -> MIPS/ARM-based MCUs. The PIC32MZ DA family further elevates the MCU category by integrating an LCD graphics controller and a dedicated 2D graphics processor, blurring the line between traditional MCU and MPU-class designs. Key features include 200 MHz core clock with hardware FPU/DSP, 640 KB SRAM, 2D graphics processing unit (GPU), integrated DDR2 DRAM controller supporting 32 MB or 128 MB external memory, Hi-Speed USB 2.0 OTG, dual CAN 2.0b controllers, 12-bit 18 MSPS ADC with 45 analog inputs, and up to 120 general-purpose I/O. The wide peripheral set reduces external chip count and BOM cost for HMI-centric designs. Technically, the device uses a 5-stage pipeline MIPS32 microAptiv core with hardware multiply/divide and DSP extensions. A dedicated 2D graphics engine accelerates GUI rendering while leaving the CPU free for application logic. The DDR2 controller offloads high-bandwidth framebuffer access to external memory, enabling WVGA-resolution TFT panels at reasonable refresh rates. Typical applications include industrial HMI panels, medical patient monitors, automotive infotainment clusters, point-of-sale terminals, smart-home control panels, and any GUI-rich embedded product requiring a 32-bit MCU with integrated graphics. When designing with this MCU, plan power sequencing for the 2.0-3.6 V rail and provide adequate decoupling near the DDR2 interface. Use the integrated 2D GPU for layer compositing to offload the CPU. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Angebot Kontakt

PIC32MZ1064DAH169-I/6J

PIC32MZ1064DAH169-I/6J - 32-bit MCU 1MB Flash 169-LFBGA | Microchip

The Microchip Technology PIC32MZ1064DAH169-I/6J is a high-performance 32-bit MIPS32 microAptiv microcontroller from the PIC32MZ DA graphics family, delivering 200 MHz core performance with 1 MB of on-chip Flash and 169-pin LFBGA (11x11 mm) packaging. It targets graphical user interface (GUI) designs with an integrated graphics controller, graphics processor, and support for up to 128 MB of externally addressable DDR2 DRAM stacked memory. The device integrates a 12-bit 18 MSPS ADC module with up to 45 analog inputs, plus HS USB and CAN interfaces. A 32-bit microcontroller (MCU) is an integrated circuit combining a 32-bit CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on a single die. It belongs to the hierarchy: microcontroller -> embedded processor -> semiconductor -> integrated circuit. The PIC32MZ DA family is positioned at the upper end of the 32-bit MCU market, offering MPU-class performance with the design simplicity of an MCU, removing the need for an external memory controller or complex power sequencing typical of microprocessor + external DDR designs. Key differentiating features include an integrated graphics controller with hardware-accelerated rendering, a dedicated graphics processor for JPEG decoding and image composition, 640 KB of SRAM, and support for stacked DDR2 DRAM up to 128 MB. This combination eliminates external memory components required by competing solutions, reducing BOM cost and PCB area for HMI and IoT gateway applications. The 12-bit ADC samples at 18 MSPS, enabling audio processing and precision sensor interfaces without an external converter. Typical applications include industrial HMI panels, automotive infotainment displays, medical patient monitors, IoT gateways with on-device graphics, and high-resolution touch-screen controllers. The 169-LFBGA package is footprint-compatible across the PIC32MZ1064DAH169 family, allowing design teams to scale between Flash densities without PCB rework. A practical design consideration: this BGA package demands careful PCB layout with via-in-pad technology, controlled-impedance traces for the DDR2 interface, and matched-length routing for the parallel display bus. Engineers should validate thermal performance against the 1.7W typical dissipation at 200 MHz operation. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not consolidated in the manufacturer datasheet, accelerating your selection and qualification process.

Angebot Kontakt

PIC32MZ1064DAH176T-I/2J

PIC32MZ1064DAH176T-I/2J - 200MHz 1MB Flash Graphics MCU | Microchip

The Microchip PIC32MZ1064DAH176T-I/2J is a high-performance 32-bit MIPS microcontroller from the PIC32MZ DA (Graphics) family, featuring an integrated graphics controller, 1MB of flash memory, and an industrial temperature grade in a 176-pin LQFP package. It integrates MPU-class performance into a single MCU die, with a 200 MHz MIPS32 microAptiv core capable of up to 330 DMIPS, 1 MB flash, and on-chip DDR2 memory controller supporting external 32MB or 128MB DRAM. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one silicon die. The PIC32MZ family belongs to the PIC32 series of MIPS-based microcontrollers, which sits in the broader taxonomy of embedded microcontrollers -> 32-bit microcontrollers -> MIPS-based MCUs -> integrated graphics MCUs -> embedded semiconductors. The PIC32MZ DA family specifically targets graphical HMI applications with a hardware graphics processor, allowing complex GUIs without external display controllers. Key features include hardware graphics controller and graphics processor unit, 12-bit ADC and 12-bit DAC peripherals, Hi-Speed USB 2.0 with integrated PHY, 10/100 Ethernet MAC, CAN-FD controller, and up to 53 general-purpose I/O pins. The integrated DDR2 controller supports up to 128 MB external memory for frame buffers, with hardware accelerated image compositing, alpha blending, and primitive rendering. The device also includes cryptographic accelerators, parallel camera interface, and PMP (Parallel Master Port) for display connection. The architecture combines the MIPS32 microAptiv core with a dedicated 2D graphics engine, allowing the CPU to offload drawing operations. At 200 MHz with hardware multipliers and DSP extensions, the core delivers deterministic real-time performance suitable for industrial control loops while concurrently driving graphical displays. The dual-bank flash supports live firmware updates, and the cryptographic engine includes AES, DES, and SHA acceleration. Typical applications include industrial HMI panels, graphical instrumentation displays, medical diagnostic device interfaces, automotive infotainment clusters, smart appliance user interfaces, and IoT edge gateways with display capability. The integrated graphics eliminates the need for external GPU or display controller ASICs, reducing BOM cost and PCB area. Design consideration: route DDR2 signals with controlled impedance (50 ohms single-ended, 100 ohms differential) and length-match within 50 mils for stable operation above 100 MHz. Place decoupling capacitors as close as possible to each power pin pair (VDD/AVDD, VBAT) using a 100 nF + 4.7 uF combination. This page synthesizes distributor pricing, drop-in alternatives within the PIC32MZ DA family, and practical PCB layout notes not aggregated on the manufacturer product page.

Angebot Kontakt

Unterkategorien

Produkte (38.000+)

PIC32MZ1025DAL176T-I/2J - 32-bit MCU, 1MB Flash, 200MHz, LQFP-176

PIC32MZ1025DAL176T-V/2J - 200MHz MCU, 1MB Flash, 176-LQFP | Microchip

PIC32MZ1025DAR169-I/6J - 200MHz 32-bit MCU w/ Graphics | Microchip

PIC32MZ1025DAR169-V/6J - 200MHz 32-bit MCU with DDR2 & GPU | Microchip

PIC32MZ1025DAR169T-I/6J - 200MHz 32-bit MCU, 1MB Flash, 169-LFBGA | Microchip

PIC32MZ1025DAR176-V/2J - 200MHz MCU, 1MB Flash, 176-LQFP | Microchip

PIC32MZ1025DAR176T-V/2J - 200MHz MCU, 1MB Flash, Graphics + DDR2 | Microchip

PIC32MZ1025DAS169-I/6J - 32-bit 200MHz MCU, 1MB Flash, 169-LFBGA | Microchip

PIC32MZ1025DAS169T-I/6J - 32-bit 200MHz MCU 1MB Flash 169-LFBGA

PIC32MZ1025DAS176-I/2J - 32-bit 200MHz MCU, 176-LQFP | Microchip

PIC32MZ1025DAS176T-I/2J - 200MHz 32-bit MCU w/ GPU, 1MB Flash, 176-LQFP | Microchip

PIC32MZ1025DAS176T-V/2J - 200MHz MCU, 1MB Flash, Graphics+32MB DDR2 | Microchip

PIC32MZ1064DAA169-I/HF - 200MHz 32-bit MCU, 1MB Flash, Graphics | Microchip

PIC32MZ1064DAA176T-I/2J - 200MHz 32-Bit MCU 1MB Flash LQFP-176 | Microchip

PIC32MZ1064DAA288-I/4J - 200MHz MCU 1MB Flash 288-LFBGA | Microchip

PIC32MZ1064DAA288T-I/4J - 200MHz 32-bit Graphics MCU, 1MB Flash | Microchip

PIC32MZ1064DAB169-I/HF - 200MHz 32-bit MCU 1MB Flash 169-LFBGA | Microchip

PIC32MZ1064DAB169T-I/HF - 200MHz 32-bit MCU 1MB Flash | Microchip

PIC32MZ1064DAB176-I/2J - 200MHz MCU, 1MB Flash, LQFP-176 | Microchip

PIC32MZ1064DAB176T-I/2J - 200MHz MCU 1MB Flash LQFP-176 | Microchip

PIC32MZ1064DAG169-I/6J - 200MHz 32-bit MCU, 1MB Flash | Microchip

PIC32MZ1064DAG176T-I/2J - 200MHz 32-Bit MCU 1MB Flash | Microchip

PIC32MZ1064DAH169-I/6J - 32-bit MCU 1MB Flash 169-LFBGA | Microchip

PIC32MZ1064DAH176T-I/2J - 200MHz 1MB Flash Graphics MCU | Microchip