Mikrocontroller

Produkte (20.000+)

MC9S08AW32CFUE - 8-Bit 40MHz 32KB Flash MCU | NXP S08
MC9S08AW32CFUE

MC9S08AW32CFUE - 8-Bit 40MHz 32KB Flash MCU | NXP S08

The NXP MC9S08AW32CFUE is a 32KB-Flash, 40MHz, 8-bit S08 microcontroller in a 64-QFP (14x14 mm) package, member of the low-cost high-performance HCS08 AW family. It combines an enhanced S08 core, 32KB of embedded Flash program memory, 2KB of RAM, and a rich peripheral set including multiple timers, ADC, SCI/SPI/IIC communication modules, and a 40 MHz bus clock. The device operates from 2.7V to 5.5V, supporting both industrial and automotive-grade application environments. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), data memory (RAM), and a mix of peripherals on one die. Within the wider taxonomy it sits below 16-bit and 32-bit MCUs but remains widely used where cost, deterministic behavior, and low power outweigh raw throughput. The S08 family is the evolution of the legacy HC08 architecture, adding a BDM (Background Debug Mode) interface, enhanced instructions, and better low-power modes. Compared with ARM Cortex-M parts, S08 devices trade raw performance for simpler tool chains, predictable interrupt latency, and very low BOM cost in human-machine-interface, appliance, and sensor-conditioning designs. Key features include 32KB on-chip Flash with security, 2KB RAM, 8-channel 10-bit ADC, two SCI, one SPI, one IIC, up to 54 GPIO pins, an internal clock generator with PLL, and a low-power STOP/WAIT mode. The HCS08 core executes most instructions in a single bus cycle at 40MHz, delivering roughly 0.6-0.7 MIPS per MHz of effective throughput. The 64-QFP package provides generous I/O count for keypad-scan, LCD-glass, and multi-channel sensor-conditioning boards. Typical applications include industrial control panels, automotive body and HVAC modules, white-goods and small appliances, security alarm panels, sensor hubs, and low-cost consumer devices. The wide 2.7-5.5V supply range lets it share a 3.3V or 5V rail with analog signal-conditioning circuitry. When designing with this part, place a 0.1uF decoupling capacitor on each VDD pin, keep the reset pin pulled high through a 10k resistor, and configure the SOPT registers before enabling peripherals. Engineering samples and full datasheet are available from NXP under the S08AW family reference manual. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes beyond what the manufacturer datasheet alone provides.

Angebot Kontakt
MC9S08AW32CPUE - S08 8-Bit MCU 32KB 40MHz LQFP-64 | NXP
MC9S08AW32CPUE

MC9S08AW32CPUE - S08 8-Bit MCU 32KB 40MHz LQFP-64 | NXP

The NXP MC9S08AW32CPUE is an 8-bit HCS08 microcontroller with a 40 MHz S08 CPU core, 32KB of flash memory, and a 5V-tolerant 2.7V to 5.5V supply range, housed in a 64-pin LQFP (10x10 mm, 0.5 mm pitch) surface-mount package. It belongs to the S08AW general-purpose family alongside the AW60, AW48 and AW16 memory variants. An 8-bit microcontroller (MCU) integrates a processor core, program flash, RAM, and peripheral modules such as timers, ADC and serial interfaces on a single chip. In the embedded systems hierarchy, the MC9S08AW32 sits in the cost-sensitive general-purpose MCU class, above dedicated ASICs and below 16/32-bit application processors, making it a workhorse for board-level control tasks. Key features include the enhanced S08 CISC core executing the HC08 instruction set plus a BGND instruction, a 40 MHz internal bus clock capability (20 MHz bus frequency), single-wire background debug mode (BDM) for in-circuit programming, and 38 general-purpose I/O lines. The on-chip 10-bit ADC and multiple timer modules (per the S08AW family datasheet) support mixed-signal control loops without external components. Technical depth: the AW32 uses a single-chip architecture with on-chip flash emulating EEPROM functionality for parameter storage, an internal oscillator block that reduces BOM cost by removing an external crystal in non-precise timing applications, and low-power wait/stop modes for battery-conscious designs. The 5V operation gives superior noise margin versus 3.3V-only competitors in industrial environments. Typical applications include home appliances, industrial motor control and lighting, automotive body electronics (the S08AW family is qualified for industrial and automotive markets per NXP), and battery chargers where a robust 8-bit MCU with wide supply range is required. Design consideration: because the part is listed NRND (Not Recommended for New Designs) on NXP's product page, new designs should evaluate the drop-in family members or newer S08/Kinetis derivatives to avoid last-time-buy risk; existing boards can still use the AW32 pin-compatible family for maintenance builds. This page synthesizes verified distributor pricing, drop-in alternatives, and practical design notes not found in the NXP datasheet, refreshed as of 2026-10-18.

Angebot Kontakt
MC9S08AW32MFGE - 8-bit S08 MCU, 32KB Flash, 40MHz | NXP
MC9S08AW32MFGE

MC9S08AW32MFGE - 8-bit S08 MCU, 32KB Flash, 40MHz | NXP

The NXP Semiconductors MC9S08AW32MFGE is an 8-bit HCS08 family microcontroller with 32KB of Flash, 2KB of RAM, and a 40 MHz enhanced S08 core, housed in a 44-pin LQFP (10x10 mm) package. It belongs to NXP's S08AW low-cost, high-performance general-purpose MCU line. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, optimized for deterministic real-time control of embedded peripherals. Within the broader taxonomy, the MC9S08AW32MFGE is a microcontroller -> 8-bit MCU -> HCS08 core -> S08AW family -> embedded controller -> semiconductor. HCS08 cores use a von Neumann architecture with a 16-bit address bus and BDM (Background Debug Mode) for in-circuit development. Key features of the MC9S08AW32MFGE include 32KB on-chip Flash program memory, 2KB on-chip RAM, an internal clock generator, multiple timers (TPM, MTIM), a 10-bit ADC, and serial peripherals including SCI (UART), SPI, and I2C. The device operates from 2.7V to 5.5V across -40C to +125C (industrial/automotive extended), making it suitable for harsh-environment embedded designs. From a technical depth perspective, the HCS08 core executes most instructions in 1-2 clocks and supports up to 32 interrupt sources with prioritized vectoring. The integrated voltage regulator, low-voltage detect (LVD), and watchdog with independent clock source (COP) enhance system reliability. Multiple low-power modes (Stop, Wait, Run) plus ultra-low quiescent current enable battery-friendly designs. Typical applications include industrial control panels, automotive body electronics (lighting, seat controllers, instrument clusters), consumer white goods, sensor conditioning nodes, and HMI control boards. The 44-LQFP package provides sufficient GPIO for matrix keypads, LED drives, and parallel LCD interfaces. When designing with this device, ensure the BDM debug header is brought out for production programming, and use the internal clock plus external crystal bypass capacitor carefully. For automotive AEC-Q100 contexts, verify the full temperature grade on the specific part marking.

Angebot Kontakt
MC9S08AW32VFGE - 32KB Flash HCS08 40MHz MCU | NXP | LQFP-44
MC9S08AW32VFGE

MC9S08AW32VFGE - 32KB Flash HCS08 40MHz MCU | NXP | LQFP-44

The NXP Semiconductors MC9S08AW32VFGE is an 8-bit HCS08 microcontroller with 32KB of Flash memory, 40MHz CPU clock, and a 44-pin LQFP (10x10 mm) package. It belongs to the S08AW family, a low-cost high-performance MCU line supporting both industrial and automotive applications. The device features the enhanced S08 core, multiple peripherals, and a robust memory architecture suitable for embedded control. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, Flash memory, and peripherals such as timers, ADCs, and communication interfaces on a single silicon die. 8-bit MCUs balance cost, power consumption, and code density for applications where higher-bit processors are unnecessary. Within the hierarchy, the MC9S08AW32VFGE is a microcontroller, part of the HCS08 family, falls under the broader category of microcontrollers, embedded processors, and finally integrated circuits (ICs). HCS08 is NXP's (formerly Freescale) enhanced 8-bit architecture that succeeded the legacy HC08 family with improved instruction set and peripherals. Key features include 32KB of on-chip Flash program memory, 2KB of RAM, an internal clock generator, multiple 16-bit timers, a 10-bit ADC, SCI/SPI/IIC communication modules, and a real-time counter. The S08AW family is designed for low-power operation with multiple stop and wait modes, supporting both 3V and 5V systems. The 44-LQFP package provides easy prototyping and is pin-compatible with other S08AW family variants. Architecturally, the HCS08 core runs at up to 40MHz bus frequency with a 3-stage pipeline and 16-bit address space. The integrated voltage regulator and power management allow single-supply operation from 2.7V to 5.5V. The internal clock source eliminates the need for an external crystal in many designs, reducing BOM cost. Typical applications include automotive body electronics, industrial control systems, consumer appliances, motor control, sensor interfacing, and human-machine interface (HMI) controllers. Its automotive support makes it suitable for body control modules (BCMs), instrument clusters, and lighting control. Industrial applications include PLCs, smart sensors, and small appliances. Design considerations include proper decoupling of the supply pins, following NXP hardware design guidelines for LQFP-44 PCB layout, and selecting appropriate clock source configuration. The LQFP package has a thermal pad that should be soldered to a copper pour for improved thermal dissipation at higher ambient temperatures. This page synthesizes distributor availability, drop-in alternatives, and design notes to assist engineers in evaluating the MC9S08AW32VFGE for new designs and legacy system support.

Angebot Kontakt
MC9S08AW32VFUE - HCS08 8-bit MCU, 32KB Flash, 40MHz, 64-QFP
MC9S08AW32VFUE

MC9S08AW32VFUE - HCS08 8-bit MCU, 32KB Flash, 40MHz, 64-QFP

The NXP MC9S08AW32VFUE is a 40 MHz 8-bit microcontroller unit (MCU) from the HCS08 family with 32KB of on-chip Flash, packaged in a 64-pin QFP (14x14 mm). It integrates the enhanced S08 CISC core, 2KB of RAM, a 12-channel 10-bit ADC, multiple timers, and a wide array of serial interfaces. An 8-bit MCU is a programmable computing engine that fetches and executes instructions from on-chip memory; the HCS08 core is a Von Neumann architecture with a 16-bit address space and an enhanced instruction set targeting low-power, deterministic embedded control. Within the broader taxonomy, this part is an MCU -> microcontroller -> embedded processor -> semiconductor device. The S08 family is widely adopted in industrial and automotive subsystems where deterministic real-time response and on-chip analog integration outweigh raw compute throughput. Key features of the MC9S08AW32VFUE include 32KB of Flash program memory, 2KB of RAM, an internal clock synthesizer supporting bus rates up to 20 MHz, an integrated 10-bit ADC with up to 12 input channels, multiple PWM-capable timers, an SPI module, two SCI (UART) modules, and an I2C module. Operation from 2.7V to 5.5V supply allows direct compatibility with both 3.3V and 5V systems. The S08 core uses a Harvard-style instruction pipeline and supports background debug mode (BDM) via a single-wire interface, enabling in-circuit programming and non-intrusive debug. The peripheral set includes a real-time counter (RTC), a computer operating properly (COP) watchdog, low-voltage detect (LVD) with reset, and multiple general-purpose I/O ports. The Flash controller supports in-application reprogramming with built-in security for code protection. Typical applications include industrial control, automotive body and chassis modules, consumer appliances, sensor signal conditioning, and motor control (PWM-driven). The integrated ADC and timers make it suitable for closed-loop temperature, pressure, and flow regulation. When designing with this MCU, allocate ground and supply decoupling close to every VDD/VSS pair (typically 100 nF + bulk capacitor) and keep the BDM pin accessible for production programming. For automotive deployments, observe NXP's EMC and ESD guidelines for body electronics. This page synthesizes NXP S08AW family datasheet parameters, distributor pricing, drop-in alternatives within the same family, and PCB-level design notes not consolidated in the manufacturer datasheet alone.

Angebot Kontakt
MC9S08AW48CFDE - HCS08 8-bit MCU, 48KB Flash, 40MHz | NXP
MC9S08AW48CFDE

MC9S08AW48CFDE - HCS08 8-bit MCU, 48KB Flash, 40MHz | NXP

The NXP Semiconductors MC9S08AW48CFDE is an 8-bit HCS08 microcontroller (MCU) from the low-cost, high-performance S08AW family, delivering 40 MHz core performance with 48 KB of on-chip Flash memory in a 48-pin QFN-EP (7 x 7 mm) package. It is a member of the MC9S08AW60 / AW48 / AW32 / AW16 family, all using the enhanced S08 core with a CISC instruction set and supporting both 3.3 V and 5 V operation for industrial and automotive-grade embedded designs. An 8-bit microcontroller is a single-chip computer that integrates a CPU, program memory, data RAM, and peripherals (timers, ADC, communication interfaces, GPIO) into one IC. HCS08 is NXP/Freescale's enhanced 8-bit CISC architecture used widely in cost-sensitive motor control, white-goods, and consumer appliance designs. Within the broader taxonomy, the MC9S08AW48 sits as: HCS08 -> 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. Its low power consumption, robust peripheral set, and large Flash make it attractive for legacy embedded platforms that do not need 32-bit performance. Key feature highlights include 48 KB Flash program memory, 2 KB RAM, an internal 10-bit ADC, multiple timers (PWM, MTIM, RTI), SCI/SPI/I2C communication peripherals, and an integrated voltage regulator supporting 2.7 V to 5.5 V operation. The QFN-EP package provides an exposed thermal pad that improves heat dissipation and enables PCB layout densities typical of industrial controller boards. From an architectural standpoint, the MC9S08AW48CFDE uses the enhanced HCS08 core with a BDM (Background Debug Mode) interface for in-circuit programming and debug, plus an internal clock generator with PLL flexibility. The integrated peripherals are addressable via a unified memory map and use NXP's standard peripheral library, reducing firmware porting effort between AW-family variants. Typical applications include white-goods / home-appliance control boards, motor-control subsystems (BLDC drivers up to modest ratings), automotive body electronics clusters, point-of-sale terminals, and industrial sensor hubs. The wide 2.7-5.5 V supply range also makes it well suited for battery-powered instrumentation where 3.3 V coin-cell or lithium chemistries dominate. When designing with this device, pay attention to the unique QFN-EP land pattern and ensure the exposed pad is soldered to a sufficiently large copper pour for thermal relief and ground return. Programming via BDM requires NXP's CodeWarrior or P&E Micro tools; designers migrating to newer S32K or LPC families should plan firmware abstraction layers accordingly. This page synthesizes distributor pricing, drop-in alternatives from the same NXP HCS08 AW family, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for sourcing and lifecycle decisions.

Angebot Kontakt
MC9S08AW48CFGE - 8-bit HCS08 MCU, 48KB Flash, 40MHz | NXP
MC9S08AW48CFGE

MC9S08AW48CFGE - 8-bit HCS08 MCU, 48KB Flash, 40MHz | NXP

The NXP MC9S08AW48CFGE is a member of the HCS08 family of 8-bit microcontrollers, featuring an enhanced S08 core running at up to 40 MHz with a 20 MHz internal bus frequency. It integrates 48 KB of on-chip Flash program memory, 2 KB of RAM, and 34 general-purpose I/O lines in a 44-pin LQFP (10x10 mm) package operating from 2.7 V to 5.5 V. The device belongs to the cost-optimized AW family targeting industrial and consumer embedded designs. A microcontroller (MCU) is a single-chip computer that combines a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), and a set of on-chip peripherals such as timers, communication controllers, and analog modules. Within the semiconductor hierarchy, an 8-bit MCU sits below 32-bit microcontrollers and above discrete logic ICs in complexity, optimized for deterministic control loops, low power consumption, and low bill-of-materials cost. The HCS08 core extends the legacy HC08 instruction set with the BGND instruction for single-wire background debug, enabling in-circuit programming and debug through a single pin. Key features include 38 I/O ports (per NXP part summary), on-chip peripherals such as PWM, WDT, LVD, POR, plus serial interfaces including SCI, SPI, and I2C for connectivity to sensors, actuators, and external memory. The internal Flash supports in-application reprogramming, and the integrated clock generator with PLL supports the 40 MHz CPU clock from a variety of external crystal or oscillator sources. The 44-LQFP package offers a 0.5 mm pitch and an exposed thermal pad option, suitable for hand-soldering and standard reflow profiles on multilayer PCBs. The architecture uses a von-Neumann-style unified address space, allowing the CPU and DMA engine to access Flash, RAM, and peripheral registers through a single 16-bit bus. Interrupt handling uses a vectored scheme with programmable priority, and the on-chip debug module supports breakpoints and watchpoints without requiring additional pins beyond the BKGD line. The S08 core retains HC08 source-level compatibility while adding improved branch prediction and a stack pointer accessible from C code, simplifying compiler support. Typical applications include industrial control modules, home appliance controllers, low-end motor drives, battery-powered sensor nodes, and consumer electronics requiring reliable 8-bit processing with mixed-signal I/O. The combination of Flash memory, robust peripherals, and a wide operating voltage range (2.7 V to 5.5 V) makes this part a flexible workhorse for cost-sensitive designs. When designing with this MCU, ensure that the BKGD pin is brought out to a test pad or connector for in-circuit programming, and provide adequate decoupling (100 nF plus 4.7 uF bulk) on each VDD pin. Watchdog timer refresh discipline is essential in noisy environments. This page synthesizes distributor pricing, lifecycle status, drop-in alternatives from the AW/AC family, and practical design notes that go beyond the manufacturer datasheet.

Angebot Kontakt
MC9S08AW48CFGER - 8-bit HCS08 MCU, 48KB Flash, 40MHz | NXP (Tape & Reel)
MC9S08AW48CFGER

MC9S08AW48CFGER - 8-bit HCS08 MCU, 48KB Flash, 40MHz | NXP (Tape & Reel)

The NXP MC9S08AW48CFGER is a member of the HCS08 family of 8-bit microcontrollers, featuring an enhanced S08 core running at up to 40 MHz with a 20 MHz internal bus frequency. It integrates 48 KB of on-chip Flash program memory, 2 KB of RAM, and 34 general-purpose I/O lines in a 44-pin LQFP (10x10 mm) package operating from 2.7 V to 5.5 V. The device belongs to the cost-optimized AW family targeting industrial and consumer embedded designs. A microcontroller (MCU) is a single-chip computer that combines a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), and a set of on-chip peripherals such as timers, communication controllers, and analog modules. Within the semiconductor hierarchy, an 8-bit MCU sits below 32-bit microcontrollers and above discrete logic ICs in complexity, optimized for deterministic control loops, low power consumption, and low bill-of-materials cost. The HCS08 core extends the legacy HC08 instruction set with the BGND instruction for single-wire background debug, enabling in-circuit programming and debug through a single pin. Key features include 38 I/O ports (per NXP part summary), on-chip peripherals such as PWM, WDT, LVD, POR, plus serial interfaces including SCI, SPI, and I2C for connectivity to sensors, actuators, and external memory. The internal Flash supports in-application reprogramming, and the integrated clock generator with PLL supports the 40 MHz CPU clock from a variety of external crystal or oscillator sources. The 44-LQFP package offers a 0.5 mm pitch and an exposed thermal pad option, suitable for hand-soldering and standard reflow profiles on multilayer PCBs. The architecture uses a von-Neumann-style unified address space, allowing the CPU and DMA engine to access Flash, RAM, and peripheral registers through a single 16-bit bus. Interrupt handling uses a vectored scheme with programmable priority, and the on-chip debug module supports breakpoints and watchpoints without requiring additional pins beyond the BKGD line. The S08 core retains HC08 source-level compatibility while adding improved branch prediction and a stack pointer accessible from C code, simplifying compiler support. Typical applications include industrial control modules, home appliance controllers, low-end motor drives, battery-powered sensor nodes, and consumer electronics requiring reliable 8-bit processing with mixed-signal I/O. The combination of Flash memory, robust peripherals, and a wide operating voltage range (2.7 V to 5.5 V) makes this part a flexible workhorse for cost-sensitive designs. When designing with this MCU, ensure that the BKGD pin is brought out to a test pad or connector for in-circuit programming, and provide adequate decoupling (100 nF plus 4.7 uF bulk) on each VDD pin. Watchdog timer refresh discipline is essential in noisy environments. This page synthesizes distributor pricing, lifecycle status, drop-in alternatives from the AW/AC family, and practical design notes that go beyond the manufacturer datasheet.

Angebot Kontakt
MC9S08AW48CPUE - 8-bit S08 MCU 48KB Flash 40MHz | NXP
MC9S08AW48CPUE

MC9S08AW48CPUE - 8-bit S08 MCU 48KB Flash 40MHz | NXP

The NXP MC9S08AW48CPUE is an 8-bit HCS08 microcontroller with 48KB flash memory, a 40MHz CPU core (20MHz internal bus frequency), and a 2.7V to 5.5V supply range, housed in a 64-pin LQFP (10x10 mm, 0.5 mm pitch) package. An 8-bit microcontroller is a single-chip computer whose CPU processes data in 8-bit words. Within the semiconductor hierarchy, the MC9S08AW48 belongs to the S08AW family of the HCS08 (HC08 successor) core architecture, which sits under NXP's general-purpose MCU portfolio for embedded control. MCUs of this class combine processor, flash, RAM, timers, serial interfaces, and analog peripherals on one die, replacing multi-chip logic designs in cost-sensitive systems. Key features include the enhanced S08 CPU executing the HC08 instruction set with an added BGND instruction, single-wire background debug mode (BDM) for low-cost in-circuit debugging, and 38 general-purpose I/O lines. The family integrates a 16-channel 10-bit ADC and multiple serial modules, allowing sensor interfacing and communication without external components. Technically, the S08AW series runs the CPU at up to 40MHz with a 20MHz internal bus, using a CISC architecture with dense instruction encoding well suited to C compilers such as CodeWarrior. Flash memory is in-system programmable, and supply operation spans 2.7V to 5.5V, permitting direct connection to 3.3V or 5V industrial rails. The device supports both industrial and automotive industry applications per NXP's family overview. Typical applications include industrial control and automation nodes, automotive body and convenience modules, appliance and motor control boards, and consumer electronics requiring low-cost, robust 8-bit control with analog sensing. Design consideration: the part is listed NRND (Not Recommended for New Designs) by NXP, so new designs should evaluate the S08P or S08DZ successors, while existing designs can continue sourcing through authorized channels or Rochester Electronics. This page synthesizes distributor pricing context, drop-in alternatives, lifecycle status, and practical design notes not found in the manufacturer datasheet alone.

Angebot Kontakt
MC9S08AW50CFUE - 8-bit HCS08 MCU 40MHz 50KB Flash | NXP
MC9S08AW50CFUE

MC9S08AW50CFUE - 8-bit HCS08 MCU 40MHz 50KB Flash | NXP

The NXP (Freescale Semiconductor) MC9S08AW50CFUE is an 8-bit HCS08 microcontroller with 40 MHz bus speed, 50 KB (50K x 8) of FLASH program memory, and a 64-QFP (14x14 mm) surface-mount package. It belongs to the S08AW general-purpose AW family and supports both industrial and automotive applications. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, forming the lowest tier of the embedded computing hierarchy: MCU -> embedded processor -> microprocessor -> system-on-chip. The HCS08 family is NXP's enhanced 8-bit core architecture, an evolution of the legacy 68HC08 and HC08 cores, offering higher clock speeds and lower power per instruction cycle for cost-sensitive embedded control. Key features of the MC9S08AW50CFUE include the enhanced S08 core running at up to 40 MHz, 50 KB of on-chip FLASH memory with in-circuit programming capability, and integrated connectivity peripherals including I2C, SCI, SPI, and UART/USART serial interfaces. The device also integrates system protection peripherals such as low-voltage detect (LVD) and power-on reset (POR), reducing external component count. Technical depth: the S08 core uses a von Neumann architecture with a background debug controller (BDC) enabling non-intrusive, single-wire flash programming and debugging without consuming user resources. The FLASH memory scaling across the AW family (16 KB to 60 KB) lets designers migrate firmware within the same peripheral set and pinout as memory requirements grow or shrink. Typical applications include automotive body electronics, industrial control systems, consumer appliance controllers, and motor control or lighting systems where 8-bit cost efficiency with automotive-grade reliability is required. Design consideration: verify FLASH density against firmware roadmap - the 50 KB density sits between the AW48 and AW60 variants, so selecting the AW60 provides upgrade headroom on an identical footprint. This page synthesizes distributor availability, same-family drop-in alternatives, and practical sourcing guidance not found in the manufacturer datasheet. Pricing is available on request as of 2026-10-18.

Angebot Kontakt
MC9S08AW60CFDE - 8-bit HCS08 MCU, 60KB Flash, 40MHz, QFN-48 | NXP
MC9S08AW60CFDE

MC9S08AW60CFDE - 8-bit HCS08 MCU, 60KB Flash, 40MHz, QFN-48 | NXP

The NXP MC9S08AW60CFDE is an 8-bit HCS08-family microcontroller (MCU) featuring 60KB of on-chip Flash, 4KB of RAM, and a 40MHz enhanced S08 CPU core, housed in a 48-pin QFN-EP (7x7 mm, 0.5mm pitch) package with exposed thermal pad. It operates from a 2.7V to 5.5V supply and provides 38 general-purpose I/O pins. The device integrates a 20MHz internal bus, an HC08-compatible instruction set with the added BGND instruction, a single-wire background debug mode (BDM) interface, and a rich peripheral mix including timers, ADC, SCI, SPI, and I2C. An 8-bit microcontroller (MCU) is a single-chip processor that integrates CPU, Flash program memory, RAM, and peripherals. The HCS08 family sits within the broader 8-bit MCU category, which trades raw compute performance for low cost, simple toolchains, deterministic interrupt latency, and ultra-low static power consumption. MC9S08AW60CFDE belongs to the Freescale/NXP S08AW sub-family, the lowest-cost high-performance HCS08 line optimized for industrial and automotive body applications. Key features include 60KB Flash (organized as 60K x 8), 4KB RAM, an internal bus frequency of 20MHz derived from the 40MHz CPU clock, multiple communication interfaces (SCI, SPI, I2C), a 10-bit ADC, programmable timers (TPM), and a wide 2.7V-5.5V operating range that supports both 3.3V and 5V rails. The single-wire BDM enables in-circuit programming and debugging with minimal pin overhead, and the QFN-EP exposed pad enhances thermal dissipation for industrial temperature operation. Architecturally the S08 core is a von Neumann CISC machine using the legacy HC08 instruction set extended with BGND to enter background debug mode. Flash security, a computer-operating-properly (COP) watchdog, low-voltage detect (LVD), and a real-time interrupt (RTI) round out the reliability feature set commonly expected in industrial embedded control. The 7x7mm QFN-48 footprint enables compact PCB designs while still exposing 38 I/Os. Typical applications include industrial control and sensor interfacing, automotive body and chassis subsystems, white-goods and appliance control, low-end consumer electronics, lighting controllers, and general-purpose embedded platforms replacing older HC08 designs. The wide operating voltage range and rugged -40C to +125C temperature support make it well suited to harsh environments. For designs requiring more memory or CAN connectivity, the AW60 can be migrated within the S08AW sub-family by swapping the MC9S08AW32/AW48/AW16 derivatives. When designing with this part, ensure the BDM pin is accessible for in-circuit programming or is brought out to a test pad. Decouple VDD with a 100nF ceramic capacitor placed within 5 mm of each supply pin, and solder the exposed pad (EP) to a thermal pad with thermal vias for adequate heat spreading in industrial-temperature designs. Be aware that NXP has marked this part NRND (Not Recommended for New Designs), so consider the related S08AW family members or S08QE/S08AC successors for new product introductions.

Angebot Kontakt
MC9S08AW60CFGE - 8-bit S08 MCU, 60KB Flash, 40MHz | NXP
MC9S08AW60CFGE

MC9S08AW60CFGE - 8-bit S08 MCU, 60KB Flash, 40MHz | NXP

The NXP MC9S08AW60CFGE is an 8-bit HCS08 microcontroller with a 40 MHz HCS08 CPU (20 MHz internal bus frequency), 60 KB flash memory, 2 KB RAM, and a 44-pin LQFP (10x10 mm) package. An 8-bit microcontroller is an integrated circuit that contains a processor core, memory, and programmable peripherals on a single chip, executing instructions on 8-bit data words. Within the embedded systems hierarchy, the MCU sits at the device level of the broader microcontroller family: HCS08 core -> S08 family -> Freescale/NXP 8-bit MCU -> semiconductor IC. MCUs like the S08AW are used where cost, low pin count, and sufficient performance matter more than raw processing power. Key features of the MC9S08AW60 include the enhanced HCS08 core with HC08 instruction set compatibility plus the added BGND instruction, single-wire background debug mode (BDM) interface for low-cost emulation and flashing, 8-channel 10-bit ADC, and a supply voltage range of 2.7V to 5.5V, supporting both 3.3V and 5V systems. The part is available in industrial and automotive-qualified contexts per NXP product information, with 38 general-purpose I/O lines on this package variant. Architecturally, the S08AW family uses flash-based program memory with in-application programming capability, and the on-chip peripherals include timer/PWM modules, serial communication interfaces (SCI, SPI), and an IIC bus controller, enabling single-chip designs for measurement and control tasks without external components. Typical applications include automotive body electronics (window lifters, lighting control, cluster functions), industrial control and motor-adjacent logic, appliance control boards, and low-cost human-machine interfaces. The wide 2.7V to 5.5V operating range and robust I/O make it well suited to harsh electrical environments. A key design consideration is lifecycle status: NXP lists this part as NRND (Not Recommended for New Designs), so new projects should evaluate family successors, while existing designs can continue sourcing through authorized channels. This page adds value beyond the datasheet by consolidating drop-in alternatives, lifecycle guidance, comparison tables, and design notes sourced from NXP and distributor data verified as of 2026-10-18.

Angebot Kontakt
MC9S08AW60CFUE - 40MHz 60KB Flash 8-Bit MCU | NXP
MC9S08AW60CFUE

MC9S08AW60CFUE - 40MHz 60KB Flash 8-Bit MCU | NXP

The NXP Semiconductors MC9S08AW60CFUE is an 8-bit HCS08 microcontroller with a 40 MHz CPU, 60 KB of Flash program memory, 4 KB of RAM, and a 64-pin QFP package measuring 14 mm by 14 mm. It is designed for embedded control applications that require a compact, low-cost microcontroller with integrated communication and timing peripherals. The verified product information identifies the device as part of the MC9S08AW family, using the enhanced HCS08 core and supporting industrial and automotive applications. A microcontroller is a compact embedded-computing device that integrates a processor core, nonvolatile program memory, working memory, input/output ports, and peripherals into one package. The MC9S08AW60CFUE belongs to the HCS08 8-bit MCU hierarchy, where the CPU executes firmware from Flash while RAM supports variables, stack operations, and intermediate data. Its 40 MHz clock provides faster instruction execution than lower-frequency 8-bit designs, making it suitable for real-time control, communication, and mixed signal systems. Key verified features include 60 KB of Flash memory, 4 KB of RAM, 38 I/O ports according to one product specification source, and connectivity including I2C, SCI, and SPI. The device also includes listed peripherals such as low-voltage detection, power-on reset, pulse-width modulation, and a watchdog timer. The 64-QFP package provides a higher pin count than small-outline packages and supports external peripheral connections, debug access, and system integration. The MC9S08AW60CFUE uses the HCS08 instruction set with an added BGND instruction, and the verified datasheet description identifies a minimum instruction cycle time of 50 ns under the stated 2.7 V and 20 MHz bus condition. Because the device is an 8-bit MCU, its architecture is generally intended for control logic, sensor interfaces, actuator control, communications, and embedded products rather than high-end application processing. Typical applications include industrial control panels, automotive body and accessory electronics, instrumentation, motor or relay control, sensor acquisition, serial communication gateways, and compact consumer devices. Designers should select the correct package variant, power range, peripheral configuration, and temperature grade for the target assembly. For PCB design, preserve the manufacturer-recommended decoupling and exposed programming or debug connections, and verify signal levels against the selected HCS08AW variant. When replacing another MCU, confirm pin assignment, clock requirements, Flash/RAM sizing, peripheral mapping, and software toolchain compatibility rather than relying only on the family name. This page consolidates verified manufacturer and distributor information, package details, lifecycle status, pricing context, and engineering selection guidance. It is intended to help engineers identify the correct MCU and plan a hardware and firmware migration without assuming that a similarly named part is automatically drop-in compatible.

Angebot Kontakt
MC9S08AW60CPUE - 8-bit MCU 60KB Flash 40MHz | NXP
MC9S08AW60CPUE

MC9S08AW60CPUE - 8-bit MCU 60KB Flash 40MHz | NXP

The NXP MC9S08AW60CPUE is an 8-bit HCS08 microcontroller with 60 KB flash memory, 40 MHz CPU clock (20 MHz internal bus frequency), and 4 KB RAM, housed in a 64-pin LQFP (10 x 10 mm, 0.5 mm pitch, MO-220VKKD-2) surface-mount package. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and peripheral interfaces on one die, serving as the lowest level of the embedded computing hierarchy (MCU -> embedded processor -> semiconductor). The HCS08 family from NXP (originally Freescale Semiconductor) is a CISC-architecture 8-bit MCU line built around an enhanced S08 core that executes the HC08 instruction set with the added BGND instruction. Key features of the MC9S08AW60CPUE include 60 KB of on-chip flash program memory with 4 KB of RAM, a single-wire background debug mode (BDM) interface for low-cost in-circuit debugging, a 16-bit timer module, a 10-bit ADC, and serial communication interfaces including SCI and SPI. The device offers 38 general-purpose I/O and multiple power-saving modes, which are essential for battery-operated and energy-sensitive designs. The enhanced HCS08 core operates from a 2.7 V to 5.5 V single supply, supporting direct connection to automotive and industrial 5 V rails as well as 3.3 V logic systems. The wide supply range eliminates the need for an external regulator in many cost-sensitive applications, reducing bill-of-materials cost. Flash memory is programmed in-system through the background debug interface, supporting field firmware updates. Typical applications include automotive body electronics, industrial control systems, home appliances, motor control, and cost-sensitive consumer devices. The industrial and automotive qualification breadth of the S08AW family makes it a common choice for dashboard controllers, sensor hubs, and lighting control modules. When designing with this MCU, plan the clock configuration carefully: the 40 MHz CPU clock is derived from an internal bus running at 20 MHz, so timing budgets and peripheral prescalers must be calculated at bus speed. Reserve the single-wire debug pin routing on the PCB for production programming access. This page synthesizes distributor pricing data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a complete selection and sourcing resource.

Angebot Kontakt
MC9S08AW60MFDE - 8-bit HCS08 MCU 60KB Flash 40MHz | NXP
MC9S08AW60MFDE

MC9S08AW60MFDE - 8-bit HCS08 MCU 60KB Flash 40MHz | NXP

The NXP MC9S08AW60MFDE is an 8-bit HCS08-family microcontroller unit (MCU) integrating 60 KB of on-chip Flash, 60 KB of ROM-free RAM region (2 KB), and a 40 MHz enhanced HCS08 central processing unit with a 20 MHz internal bus frequency, packaged in a 48-pin QFN-EP (7 mm x 7 mm) with exposed thermal pad. It operates from 2.7 V to 5.5 V supply and provides 38 general-purpose I/O ports with background-debug-mode (BDM) single-wire interface support. An MCU (microcontroller unit) is a single-chip computer that combines a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), and a rich set of on-chip peripherals such as timers, ADC, communication controllers, and GPIO. Within the semiconductor taxonomy the MC9S08AW60MFDE belongs to the HCS08 8-bit microcontroller family, sitting under the broader category of embedded microcontrollers, which in turn belong to microprocessors and digital logic ICs. The HCS08 family is an enhanced evolution of the legacy HC08 core, adding the BGND instruction for background debug, improved instruction throughput, and lower active/idle current draws. Key features include 60 KB of embedded Flash with in-application programmability, an internal clock generator with options for an external crystal or resonator, multiple 16-bit timer/PWM channels, up to 16 channels of 10-bit ADC, SCI (UART), SPI, and I2C peripherals, plus a real-time counter and a watchdog timer for safety-critical control loops. The device supports both industrial and automotive-grade application profiles per its family datasheet. The HCS08 core uses a von Neumann architecture with a 16-bit stack pointer, 16-bit index register (H:X), and a compact CISC instruction set that is largely source-compatible with HC08 assembly while delivering roughly 50% better performance per clock cycle. The integrated voltage regulator and brown-out reset block simplify 3.3 V and 5 V single-rail designs, while the BDM single-wire debug interface eliminates the need for an expensive in-circuit emulator during prototype development. Typical applications include industrial sensor conditioning, white-goods motor control, automotive body controllers, HVAC blower/fan controllers, low-end graphical display panels, and small-form-factor consumer appliances. The wide 2.7 V to 5.5 V input range makes it compatible with both 3.3 V and 5 V sensor and actuator systems. When designing with this part, pay close attention to decoupling: place a 100 nF X7R bypass capacitor within 1-2 mm of each power pin and a bulk 4.7 uF to 10 uF tantalum or ceramic capacitor near the package exposed pad. Also ensure the BDM pin is routed to a header or test pad for in-system debug, and verify that the IRQ pin has a proper pull-up if unused. This page synthesizes distributor pricing, drop-in alternatives from the same AW60/AW48/AW32/AW16 family, and practical design notes not found in the manufacturer datasheet alone.

Angebot Kontakt
MC9S08AW60MPUE557 - 8-bit HCS08 MCU 60KB Flash 40MHz LQFP-64
MC9S08AW60MPUE557

MC9S08AW60MPUE557 - 8-bit HCS08 MCU 60KB Flash 40MHz LQFP-64

The NXP MC9S08AW60MPUE557 is an 8-bit HCS08-family microcontroller (MCU) with a 40 MHz enhanced S08 core, 60 KB of on-chip Flash program memory, and 64 KB Flash program storage. It is housed in a 64-pin LQFP (10x10 mm) surface-mount package, operates from a 2.7 V to 5.5 V supply, and integrates ADC, PWM, timers, and serial communication peripherals for embedded control applications. The MC9S08AW60 family supports both Industrial and Automotive industry segments per NXP's product family description. Background knowledge: An 8-bit microcontroller (MCU) is a single-chip computer that combines a CPU, RAM, Flash program memory, and peripherals on one silicon die. The HCS08 core is NXP's enhanced 8-bit architecture succeeding the legacy HC08, adding the BGND instruction and a single-wire background debug mode interface that simplifies in-circuit programming and debugging. The MC9S08AW60 belongs to the AW sub-family of low-cost, high-performance HCS08 microcontrollers designed for cost-sensitive motor-control, appliance, and industrial-control applications, fitting the broader microcontroller -> embedded controller -> semiconductor taxonomy. Key features include a 40 MHz CPU clock with a 20 MHz internal bus frequency, 60 KB (60K x 8) Flash, 4 KB RAM, 38 to 64 programmable I/O lines (package-dependent), and integrated peripherals including ADC, PWM, SCI, SPI, and I2C. The device supports a -40C to +85C industrial operating temperature range and includes on-chip voltage regulator, low-voltage detection, and watchdog timer for system reliability. The single-wire background debug mode (BDM) interface enables in-circuit flash programming and real-time debug without requiring additional program memory or pin resources. The HCS08 core uses a von Neumann architecture with a 16-bit stack pointer, 16-bit index registers (H:X), and an enhanced instruction set that improves code density over the legacy HC08. The on-chip voltage regulator generates the internal logic supply from the external 2.7 V to 5.5 V input, simplifying power design. Flash memory supports in-application reprogramming via the BDM interface, enabling firmware updates in the field. Typical applications include industrial control systems, automotive body electronics, appliance motor control, HVAC controllers, and sensor-interface modules. The wide peripheral set also fits building automation, security panels, and low-cost consumer devices. Designers should evaluate supply decoupling (0.1 uF plus bulk 1 uF to 10 uF ceramic), BDM interface pin protection, and PCB layout for the ADC analog input traces. The 64-LQFP package allows easy hand-soldering and prototyping, while the 2.7 V minimum supply enables direct Li-ion or 3.3 V system-rail operation. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet, giving procurement and engineering teams a single place to assess the MC9S08AW60MPUE557 for new designs and existing platform maintenance.

Angebot Kontakt
MC9S08DN16ACLC - 40MHz 16KB 8-Bit MCU | NXP | 32-LQFP
MC9S08DN16ACLC

MC9S08DN16ACLC - 40MHz 16KB 8-Bit MCU | NXP | 32-LQFP

The NXP Semiconductors MC9S08DN16ACLC is an 8-bit S08DN microcontroller with a 40 MHz processor, 16 KB of embedded Flash memory, 512 bytes of RAM, and a 32-pin LQFP package. It combines an 8-bit CPU architecture with LIN connectivity and I2C/SPI interfaces for compact embedded-control designs. A microcontroller integrates a processor core, program memory, data memory, peripherals, interrupt control, and debug or emulation resources on one semiconductor device. The S08 family targets automotive and industrial embedded systems where deterministic control, low pin count, and communication peripherals are valuable. MC9S08DN16ACLC belongs to the broader semiconductor hierarchy: MCU, embedded processor, 8-bit microcontroller, and S08DN device. The principal verified features are a 40 MHz maximum clock, 20 MHz bus operation, 16 KB Flash organized as 16K x 8, 512 B RAM, an S08 core, an 8-bit data bus, and a 32-LQFP package measuring 7 x 7 mm. The integrated communication set includes LIN, I2C, and SPI. A cited HCS08-family source also identifies support for as many as 32 interrupt or reset sources, although device-specific applicability must be confirmed against the exact manufacturer documentation. Technically, the MCU combines a relatively high-frequency 8-bit core with modest on-chip memory, making it appropriate for compact control logic rather than high-memory graphical workloads. Its bus speed is half the stated 40 MHz CPU frequency, a useful constraint when timing peripherals or external bus transactions. The 8-bit data architecture simplifies peripheral integration while limiting throughput compared with modern 16-bit or 32-bit MCUs. Typical uses include LIN-connected automotive modules, industrial sensors, compact motor or actuator controllers, communication bridges, and embedded control panels. I2C suits low-speed sensors and EEPROMs, SPI supports faster peripherals, and LIN provides a vehicle-network-oriented serial interface when its electrical transceiver is implemented externally. Designers should preserve the 20 MHz bus constraint, confirm every peripheral and pin against the exact datasheet, and design the LIN physical layer separately when the MCU is used in a vehicle network. Current distributor information lists the device in 32-LQFP, but exposed operating limits, pin names, timing values, and package thermal details require exact manufacturer data. This page consolidates verified NXP and distributor information with selection guidance, application fit, interface considerations, and drop-in-replacement validation. It distinguishes confirmed values from parameters that still require datasheet confirmation, helping engineers avoid treating search snippets as a substitute for the exact MC9S08DN16ACLC datasheet.

Angebot Kontakt
MC9S08DN16AMLC - 8-Bit 40MHz 16KB MCU | NXP
MC9S08DN16AMLC

MC9S08DN16AMLC - 8-Bit 40MHz 16KB MCU | NXP

The NXP MC9S08DN16AMLC is an 8-bit HCS08 microcontroller operating at up to 40 MHz, with 16 KB of programmable flash memory and a 32-LQFP 7 x 7 mm package. Its 20 MHz bus supports an S08 instruction set enhanced with the BGND instruction, while the integrated connectivity includes I2C, LINbus, SCI, and SPI. A microcontroller is a programmable integrated circuit that combines a CPU, memory, and peripherals on one semiconductor die. The HCS08 family belongs to the broader 8-bit MCU hierarchy and is intended for embedded control, sensing, communications, and actuator-control systems. Compared with a discrete logic controller, the MC9S08DN16AMLC consolidates processing, flash, RAM, analog conversion, timing, and serial communications into a compact surface-mount device. The verified feature set includes a 40 MHz HCS08 CPU, support for up to 32 interrupt and reset sources, a 16-channel 12-bit ADC, PWM, a watchdog timer, low-voltage detection, and power-on reset. Its 25 I/O pins provide interface capacity for sensors, displays, actuators, and industrial-control peripherals. The 512 x 8 EEPROM and RAM size should be verified against the manufacturer datasheet before final design release because the supplied search data does not state the RAM capacity directly. Typical uses include low-cost industrial controllers, building and appliance controls, sensor-conditioning systems, and compact communications modules. The 40 MHz CPU provides useful headroom for protocol handling and control loops, while the serial peripherals reduce the need for external interface devices. The LQFP package also exposes more pins than a small-outline package and can simplify board-level routing. When replacing this obsolete part, engineers should verify the complete pinout, memory map, electrical limits, peripheral allocation, and software compatibility against the manufacturer documentation. A distributor listing can confirm availability, but it does not by itself establish functional drop-in equivalence. This page combines the supplied distributor, manufacturer-related, and datasheet-search information with engineering-oriented sourcing and design guidance. It does not infer undocumented specifications or treat general parametric search results as proof of drop-in replacement.

Angebot Kontakt
MC9S08DN16AMLF - 16KB 40MHz 8-Bit MCU | NXP | LQFP-48
MC9S08DN16AMLF

MC9S08DN16AMLF - 16KB 40MHz 8-Bit MCU | NXP | LQFP-48

The NXP Semiconductors MC9S08DN16AMLF is an 8-bit S08DN microcontroller with a 40 MHz HCS08 core, 20 MHz bus, 16 KB Flash, 1 KB RAM, 39 I/O, and a 48-LQFP package. The verified product information also identifies an external oscillator, tray packaging, 16-channel 12-bit ADC support, and up to 32 interrupt or reset sources. It is listed as NRND by NXP, so engineering teams should confirm lifecycle, sourcing, and availability before new production commitments. What is an 8-bit microcontroller? An MCU is a compact embedded-control IC containing a CPU core, program and data memory, I/O ports, and peripherals such as timers, serial interfaces, and analog converters. In the broader hierarchy, this device belongs to the embedded microcontroller, 8-bit MCU, HCS08 family, and S08DN product line. Its combination of modest memory, fast CPU timing, and numerous integrated peripherals makes it suitable for control-oriented embedded systems rather than high-end application processing. The key feature set includes 16 KB of Flash for firmware, 1 KB of RAM, a 40 MHz HCS08 CPU, 20 MHz bus operation, the HC08 instruction set with the BGND instruction, and a 39-pin I/O count. The verified listings identify a 16-channel, 12-bit-resolution ADC with a stated 2.5-second conversion-time description, although the exact characterization conditions are not provided in the supplied data and should be checked in the manufacturer datasheet. MC9S08DN16AMLF is associated with automotive and industrial embedded-control use cases, including LIN-oriented interface designs and motor or sensor control systems. Its LQFP-48 package exposes the MCU resources through a relatively dense surface-mount footprint, making pin assignment, decoupling, oscillator routing, and PCB thermal design important implementation concerns. The listed package size is 7 mm by 7 mm according to the DigiKey result. Typical applications include automotive body and accessory modules, LIN-connected peripherals, sensor acquisition systems, actuator controllers, industrial control panels, and compact embedded products requiring an 8-bit MCU. For these applications, validate peripheral availability, electrical limits, memory requirements, and toolchain support against the exact orderable device before layout release. The main design consideration is lifecycle management. Because the NXP product page marks the part NRND, purchasing decisions should distinguish ongoing maintenance demand from new-design adoption. Confirm approved sources, last-time-buy implications where applicable, package dimensions, pin multiplexing, and any firmware or emulator compatibility requirements. This page synthesizes verified distributor and manufacturer information, lifecycle status, package details, technical parameters, application guidance, and sourcing considerations for engineers evaluating the MC9S08DN16AMLF.

Angebot Kontakt
MC9S08DN16CLC - 8-bit S08 MCU, 16KB Flash, 40MHz | NXP
MC9S08DN16CLC

MC9S08DN16CLC - 8-bit S08 MCU, 16KB Flash, 40MHz | NXP

The NXP MC9S08DN16CLC is an 8-bit S08 family microcontroller featuring a 40 MHz HCS08 core, 16 KB of on-chip Flash and 1 KB of RAM, packaged in a 32-pin LQFP (7x7 mm). The device targets cost-sensitive industrial control nodes requiring deterministic 8-bit performance, on-chip CAN-style connectivity peripherals, and a small footprint for compact PCBs. An 8-bit microcontroller (MCU) is a self-contained compute element that integrates a CPU, non-volatile program memory (Flash), volatile data memory (RAM), and peripherals such as timers, ADCs, communication interfaces, and GPIOs onto a single silicon die. Within the broader semiconductor taxonomy, an MCU belongs to the embedded microcontroller hierarchy: MCU -> microcontroller -> embedded processor -> semiconductor device. The 8-bit class is chosen when determinism, low interrupt latency, code simplicity, and BOM cost outweigh the throughput advantages of 16/32-bit cores. Key features include a 40 MHz maximum internal bus frequency delivering 20 MHz instruction throughput, an integrated ADC, multiple timers (TPM), SCI and SPI serial interfaces, and a low-power STOP/WAIT operating mode. The 16 KB Flash supports in-application reprogramming via background debug mode (BDM), enabling firmware updates in the field without removing the device. The S08DN16 silicon pairs an HCS08 core with NXP's peripheral set tuned for industrial networking nodes. The 32-LQFP package exposes up to 27 GPIO pins, an external interrupt controller, and a robust power-on reset (POR) and COP watchdog architecture, suitable for unattended field installations. Typical applications include industrial control modules, low-end motor control signal conditioning, sensor interface boards, building automation nodes, and low-cost consumer appliances. Designers also use it in safety accessory chains and replacement modules for legacy Freescale/NXP S08 designs. Design with adequate supply decoupling: a 100 nF ceramic placed within 5 mm of each VDD/VSS pair and a 4.7 uF bulk capacitor stabilize the internal regulator. The BKGD pin requires proper pull-up and a series resistor for in-circuit debugging. This page synthesizes distributor pricing, parametric cross-reference alternatives, and practical design notes not aggregated on the manufacturer datasheet alone.

Angebot Kontakt
MC9S08DN16CLF - 8-Bit 40MHz S08 MCU, 16KB Flash, 48-LQFP | NXP
MC9S08DN16CLF

MC9S08DN16CLF - 8-Bit 40MHz S08 MCU, 16KB Flash, 48-LQFP | NXP

The NXP MC9S08DN16CLF is an 8-bit microcontroller from the S08 family featuring a 40 MHz HCS08 central processing unit with a 20 MHz bus, 16 KB of on-chip Flash program memory, and 1 KB of RAM, housed in a 48-pin LQFP (7x7 mm) surface-mount package. It integrates a 16-channel, 12-bit analog-to-digital converter (ADC) with 2.5 microsecond conversion time, multiple serial interfaces including I2C, LINbus, SCI, and SPI, plus on-chip peripherals such as PWM, low-voltage detect (LVD), power-on reset (POR), and a watchdog timer (WDT) for robust embedded control. An 8-bit microcontroller is a microprocessor optimized for embedded control, integrating CPU, memory, and peripherals into a single chip to run deterministic, low-power firmware tasks. Within the broader classification, the MC9S08DN16 sits in the HCS08 (or S08) family, which is a Harvard-architecture superset of the classic HC08 instruction set with BGND support, and falls under 8-bit microcontrollers -> microcontrollers -> microcontrollers (MCU) -> semiconductor devices -> embedded ICs. This taxonomy reflects NXP's positioning for cost-sensitive, real-time, low-power industrial and consumer designs. Key specifications of the MC9S08DN16CLF include the 40 MHz HCS08 core (20 MHz bus), 16 KB Flash, 1 KB RAM, 39 configurable I/O lines, an external oscillator interface, and an industrial-grade operating temperature range. The 12-bit ADC with 2.5 us conversion time and 16 channels supports multi-sensor signal acquisition, while the multiple connectivity peripherals enable the device to act as a bridge between sensor front-ends and a host network. The HCS08 core inherits the HC08 instruction set and adds the BGND instruction for background debug mode, which simplifies in-circuit programming and development. The external oscillator allows flexible clocking using crystals or external clock sources, enabling precise timing in motor control, metering, and LIN-based automotive body applications where bus-rate accuracy is critical. Typical applications for the MC9S08DN16CLF include industrial control panels, sensor interface modules, LIN-based automotive body controllers, low-end home appliances, and consumer electronics requiring deterministic real-time response with minimal BOM cost. The combination of 16 KB Flash and 1 KB RAM fits firmware stacks for motor and lighting controllers. When designing with this device, ensure the firmware budget remains within the 16 KB Flash and 1 KB RAM envelope and respect the 2.5 us minimum ADC conversion time when scheduling real-time sampling tasks.

Angebot Kontakt
MC9S08DN32ACLC - 8-Bit 40MHz HCS08 MCU 32KB Flash | NXP LQFP-32
MC9S08DN32ACLC

MC9S08DN32ACLC - 8-Bit 40MHz HCS08 MCU 32KB Flash | NXP LQFP-32

The NXP MC9S08DN32ACLC is an 8-bit HCS08-family microcontroller running at 40 MHz CPU clock (20 MHz bus) with 32 KB of on-chip Flash program memory and 1 KB of EEPROM, housed in a 32-pin LQFP package (7 mm x 7 mm). The part integrates a 25-pin general-purpose I/O set and the S08 enhanced core with the HC08 instruction set plus the BGND instruction, supporting up to 32 interrupt/reset sources for embedded control applications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory, RAM, EEPROM, timers, communication peripherals and I/O into one package. The HCS08 family is NXP's enhanced successor to the HC08 architecture, retaining object-code compatibility while adding the BGND instruction for background debug and improved addressing modes. Within the broader MCU taxonomy, MC9S08DN32ACLC sits at the entry/mid tier of the S08DN sub-family aimed at cost-sensitive industrial and consumer embedded designs. Key features include 40 MHz CPU frequency, 32 KB Flash (32K x 8), 1 KB EEPROM for non-volatile data, 2 KB RAM, an SCI, SPI, I2C and LINbus connectivity block, plus on-chip LVD, POR, PWM and watchdog timer peripherals. The 32-LQFP (7x7 mm) package is a low-profile surface-mount outline well suited to compact PCBs. Twenty-five GPIO pins cover typical sensor, switch and LED interfaces. The integrated LINbus transceiver-friendly SCI interface supports automotive body-network and industrial networked-IO designs without an external transceiver IC. Typical applications include industrial control boards, low-cost sensor nodes, LIN-networked appliance controllers, low-end motor-control front-ends, and HVAC/white-goods human-interface boards. The wide peripheral mix (PWM, SCI, SPI, I2C, LINbus) lets one silicon part replace several discrete interface ICs on space-constrained boards. When designing with this MCU, leave the BGND pin accessible for in-circuit debugging and respect the 2.7 V to 5.5 V supply range. Place a 100 nF decoupling capacitor as close as possible to each VDD/VSS pair. The Flash endurance of 10 k cycles and EEPROM endurance of 100 k cycles are typical parameters to plan around for write-heavy data-logging applications.

Angebot Kontakt
MC9S08DN32ACLH - 40MHz 8-Bit MCU with CAN | NXP
MC9S08DN32ACLH

MC9S08DN32ACLH - 40MHz 8-Bit MCU with CAN | NXP

The NXP Semiconductors MC9S08DN32ACLH is an 8-bit S08 automotive and industrial microcontroller with a 40 MHz CPU, 32 KB flash memory, 1 KB RAM, CAN connectivity, LIN functionality, and a 64-LQFP 10 x 10 mm package. The device uses an HCS08 processor core and supports up to 32 interrupt or reset sources. A microcontroller is a programmable integrated circuit that combines a CPU core, memory, peripherals, and input/output interfaces on one semiconductor device. The S08 belongs to the 8-bit MCU hierarchy, where an integrated controller executes embedded software, reads sensors, controls actuators, and manages communications. Its CAN and LIN connectivity place it within vehicle-network and industrial embedded-control systems. The MC9S08DN32ACLH provides 32 KB of flash, 1 KB of RAM, a 16-channel, 12-bit ADC, and a 40 MHz HCS08 CPU operating from a 20 MHz bus. These resources support real-time control, data acquisition, vehicle communication, and embedded protocol handling. The package is a 64-lead LQFP measuring 10 x 10 mm. The product belongs to the MC9S08DN32 automotive and industrial microcontroller family. Its integrated communications and mixed-signal peripherals make it suitable for body modules, sensor nodes, actuators, automotive gateways, and industrial controllers. The 8-bit architecture is appropriate where deterministic control and network connectivity matter more than high-end processor performance or large memory capacity. Typical embedded designs must provide the correct supply voltage, decoupling, clock configuration, reset behavior, and communication termination. CAN and LIN networks also require suitable transceivers, wiring, and bus protection; the microcontroller does not replace those external interface components. Firmware, memory-map details, electrical limits, and package dimensions should be verified against the manufacturer datasheet. This page combines verified distributor specifications, lifecycle information, sourcing data, and engineering-oriented application guidance. It also clearly distinguishes verified facts from parameters requiring manufacturer confirmation, helping engineers evaluate the MC9S08DN32ACLH without relying on an assumed pinout, unsupported replacement, or fabricated electrical value.

Angebot Kontakt
MC9S08DN32AMLC - S08 8-bit MCU, 32KB Flash, 40MHz | NXP
MC9S08DN32AMLC

MC9S08DN32AMLC - S08 8-bit MCU, 32KB Flash, 40MHz | NXP

The NXP MC9S08DN32AMLC is an 8-bit microcontroller from the S08DN family featuring a 40 MHz HCS08 CPU core with 32 KB of on-chip Flash memory, 1.5 KB of RAM, and a 32-pin LQFP (7x7 mm) package optimized for automotive body and industrial control applications. It integrates a 12-bit ADC with up to 16 channels, a CAN (Controller Area Network) module, embedded EEPROM, and on-chip emulation/debug support, making it one of the first 8-bit MCU families to combine CAN, EEPROM, and BDM debugging in a single silicon platform. An 8-bit microcontroller (MCU) is a microprocessor core, memory, and peripheral set integrated into a single chip. Within the broader hierarchy, the MC9S08DN32AMLC sits under: 8-bit MCU -> HCS08 family -> S08DN sub-family -> microcontroller -> embedded processor -> semiconductor. Compared with 16-bit and 32-bit MCUs, 8-bit devices offer lower unit cost, simpler toolchains, and deterministic interrupt latency, which remains valuable for cost-sensitive automotive body, appliance, and industrial nodes. Key features of the MC9S08DN32AMLC include a 20 MHz bus (40 MHz CPU), 25 general-purpose I/O pins, a 12-bit ADC with 2.5 us conversion time, an MSCAN (CAN 2.0 A/B) module, an SCI/UART, an SPI, an I2C bus, and an internal clock generator with a watchdog timer. The device operates across an extended -40 C to +125 C automotive temperature range with multiple low-power stop and wait modes to support energy-constrained nodes. Technically, the HCS08 core implements the HC08 instruction set with the added BGND instruction for background debug mode. The 32 KB program Flash and 1.5 KB RAM are sufficient for typical CAN-based body control protocols such as door modules, seat controllers, lighting drivers, and HVAC flaps. The integrated CAN module eliminates an external transceiver controller, reducing BOM cost. Typical applications include automotive body controllers, CAN node endpoints, industrial sensor interfaces, appliance control boards, HVAC actuators, and lighting ballast controllers. The combination of CAN, ADC, and EEPROM on one die simplifies in-vehicle networking nodes that previously needed a 16-bit MCU. When designing, ensure the MSCAN baud rate prescaler matches the oscillator configuration and that the LQFP-32 thermal pad is soldered to a copper pour to keep junction rise acceptable. Decouple each VDD/VSS pair with a 100 nF ceramic placed within 5 mm of the pin. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with content calibrated for engineers selecting a drop-in replacement.

Angebot Kontakt