Mikrocontroller

Produkte (18177)

S9S12G96F0MLH - 16-bit 96KB Flash 25MHz S12G MCU | NXP
S9S12G96F0MLH

S9S12G96F0MLH - 16-bit 96KB Flash 25MHz S12G MCU | NXP

The NXP Semiconductors S9S12G96F0MLH is a 16-bit HCS12/CPU12 microcontroller from the cost-optimized S12G family, delivering 96KB of on-chip Flash and 25MHz core performance in a 64-pin LQFP (10x10 mm) package. It targets general-purpose automotive and industrial CAN/LIN nodes that require deterministic 16-bit performance without migrating to 32-bit silicon. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash/ROM), volatile working memory (RAM), and a configurable set of peripheral IP such as timers, ADC, communication controllers (CAN, LIN, SPI, SCI), and GPIO. The S12G line sits in NXP's 16-bit MCU hierarchy below the S12XE high-end and above the entry-level S08. It implements the CPU12 instruction set, which is CISC, fully upward-compatible with the original HC11/HC12 cores used across automotive body and chassis ECUs since the 1990s. Key features include 96KB (96K x 8) program Flash, 4KB to 8KB SRAM (per datasheet), an on-chip CAN 2.0 controller (msCAN), a LIN 2.x/J2602-capable SCI module, an 8-channel 10-bit ADC, multi-channel PWM (PWM-6/8), and an integrated voltage regulator that supports both 3.3V and 5V single-supply operation from a wide 3.13V to 5.5V (extended) input range. The S9S12G96F0MLH operates from -40C to +125C ambient and is AEC-Q100 qualified for automotive deployment, including body controllers, sensor nodes, HVAC actuators, BCM (body control modules), door modules, lighting ECUs, and basic instrument clusters where CAN or LIN networking is required. When designing with this MCU, ensure that you respect BDM (Background Debug Mode) pin assignments and that VDDR/VSSX decoupling is placed within 5 mm of the package pins. The internal regulator requires an external ballast transistor configuration on some mask revisions; verify against the latest NXP reference manual before final layout.

USD $7,95 Auf Lager
S9S12GN16F1MTJ - 16KB Flash 16-Bit MCU | NXP S12G
S9S12GN16F1MTJ

S9S12GN16F1MTJ - 16KB Flash 16-Bit MCU | NXP S12G

NXP Semiconductors S9S12GN16F1MTJ is a 16-bit HCS12 microcontroller from the S12G family featuring 16 KB Flash, 1 KB RAM, 25 MHz CPU clock, and a 10-bit ADC, housed in a 20-pin TSSOP package. The device operates across a wide 3.13 V to 5.5 V supply range (5 V nominal) and supports an industrial/automotive temperature grade of -40C to +125C with AEC-Q100 qualification. What is a 16-bit automotive microcontroller? An MCU (microcontroller unit) is a single-chip computer integrating CPU core, program memory (Flash), data memory (RAM), peripherals (ADC, timers, communication interfaces) and interrupt logic. A 16-bit MCU balances code efficiency and processing throughput for real-time control tasks. The S12 family from NXP sits in the hierarchy: HCS12 core -> 16-bit MCU -> automotive microcontroller -> embedded processor -> semiconductor, optimized for low cost, low pin count, and robust EMC performance. Key features include an HCS12 CPU at 25 MHz internal bus frequency with a background debug mode (BDM), an integrated 10-bit successive-approximation ADC with up to 14 channels (pin-sharing dependent), up to 14 general-purpose I/O pins, and an on-chip voltage regulator with low-voltage reset. The S12G architecture uses a unified Flash array with security lock bits and a hardware ECC for in-application reprogrammability. The S12G is an optimized, 16-bit microcontroller product line focused on low cost, high performance and low pin count. Per NXP product page, the S12G is suited for generic automotive and industrial applications requiring CAN or LIN/SAE J2602 communication, retaining code-size efficiency while supporting CAN, SCI, SPI, and I2C interfaces. Multiple S12G die options share the same peripheral set, simplifying firmware portability. Typical applications include automotive body controllers, CAN/LIN nodes, HVAC control modules, seat and mirror controllers, sensor interfaces, industrial PLC I/O expansion, low-end motor control and appliance control panels. The wide temperature range and AEC-Q100 qualification make the S9S12GN16F1MTJ suited for under-hood and chassis-adjacent ECUs. When designing with the S9S12GN16F1MTJ, ensure the supply rail stays within 3.13 V to 5.5 V and place decoupling capacitors (100 nF plus 10 uF bulk) close to VDD/VSS pairs. Use NXP's S12G bootloader for Flash programming via CAN or SCI to avoid dependence on a BDM tool in production. This page synthesizes distributor availability data, drop-in alternatives within the S12G family, and practical design notes not aggregated on the NXP product page.

USD $4,20 Auf Lager
S9S12GN16F1VLC - 16-Bit 25MHz S12G MCU 16KB Flash | NXP
S9S12GN16F1VLC

S9S12GN16F1VLC - 16-Bit 25MHz S12G MCU 16KB Flash | NXP

The NXP S9S12GN16F1VLC is a 16-bit S12 microcontroller unit (MCU) from the S12G family, delivering 25 MHz CPU performance with 16 KB of on-chip Flash memory and 2 KB of RAM in a 32-pin LQFP (7x7 mm) package. Designed for cost-sensitive, low-pin-count applications, it integrates the HCS12 CPU core architecture with automotive-grade peripherals including CAN, LIN/SAE J2602, SCI, SPI, and I2C communication interfaces. A microcontroller is a programmable system-on-chip that combines a CPU core, program memory (Flash), working memory (RAM), and a rich set of analog and digital peripherals onto a single die. Within the broader semiconductor hierarchy, an MCU sits between a microprocessor (which requires external peripherals) and an ASIC (fixed-function IC). The S12G family specifically targets automotive body and chassis modules, industrial control, and consumer appliances requiring deterministic real-time performance. S12G devices use a 16-bit CISC instruction set inherited from the original Freescale HCS12 core, offering a balance between code density and processing throughput. Key features of the S9S12GN16F1VLC include 16 KB Flash with ECC for robust code storage, 2 KB RAM for data and stack operations, a 10-bit analog-to-digital converter (ADC) for sensor interfacing, an 8-channel timer module (TIM) for PWM and capture/compare, and integrated CAN and LIN/SAE J2602 controllers. The device operates from a 3.3 V or 5 V supply and supports an industrial temperature range of -40 C to +105 C, with AEC-Q100 automotive qualification. The S12G architecture combines a 16-bit HCS12 CPU core with a peripheral coprocessor that handles serial communication, timing, and analog acquisition, allowing deterministic interrupt response without CPU intervention. Built-in memory protection and ECC protect Flash integrity in harsh environments. Typical applications include automotive body controllers (door modules, seat controllers), LIN/CAN nodes in vehicle networks, industrial sensor interface boards, HVAC fan controllers, and small appliance motor control. Its low pin count and integrated peripherals minimize external component count. When designing with this device, ensure the power supply decoupling network follows the application note recommendations and that the reset pin is properly held during power-up sequencing. BDM (Background Debug Mode) is available for in-circuit programming and debugging, requiring a dedicated 6-pin connector per the HCS12 specification. This page synthesizes distributor pricing, drop-in alternatives, and design notes not found in the manufacturer datasheet alone.

USD $2,13 Auf Lager
S9S12GN16F1VLC557 - 16KB Flash 16-bit HCS12 MCU | NXP
S9S12GN16F1VLC557

S9S12GN16F1VLC557 - 16KB Flash 16-bit HCS12 MCU | NXP

The NXP S9S12GN16F1VLC557 is a 16-bit HCS12 microcontroller built on the S12G family architecture, featuring 16 KB of Flash program memory, 1 KB of RAM, and packaged in a 32-pin LQFP (7 mm x 7 mm). It operates from a 3.15 V to 5.5 V supply, integrates a 25 MHz CPU core, and supports CAN, LIN (SAE J2602), and SCI/SPI communication peripherals targeted at low-cost automotive body electronics and industrial control nodes. A 16-bit microcontroller (MCU) is a class of embedded processor that uses a 16-bit data path and instruction word, sitting between 8-bit microcontrollers (lower cost, lower performance) and 32-bit microcontrollers (higher performance, higher cost). 16-bit MCUs are widely used in automotive body modules, appliance control, and industrial sensor nodes where integer arithmetic throughput, multi-channel communication peripherals, and deterministic interrupt response are needed without the power and software complexity of 32-bit cores. The S12G family is NXP's optimized 16-bit MCU line focused on low cost, high performance, and low pin count, fitting the body-electronics sweet spot. Key features of the S9S12GN16F1VLC557 include 16 KB of Flash memory, 1 KB of RAM, an on-chip 25 MHz HCS12 CPU with background debug mode (BDM), an integrated CAN 2.0 A/B controller, multi-channel 10-bit ADC, 8-bit PWM, and an internal voltage regulator. The 'G' suffix denotes the Generation-G family variant optimized for body and chassis applications requiring either LIN or CAN connectivity, with a maximum operating temperature suitable for under-hood and industrial deployments. The S9S12GN16F1VLC557 uses the S12G CPU core that executes 16-bit instructions on internal 24-bit addresses, allowing access to a flat memory map for C and assembly code. The integrated CAN module (msCAN) supports both standard and extended identifiers at up to 1 Mbit/s, while the SCI and SPI peripherals cover legacy automotive LIN masters and sensor interfacing. The on-chip voltage regulator allows single 5 V rail operation, eliminating external regulation. Typical applications include automotive body control modules (BCM) for lighting and wiper control, HVAC flap and blower drivers, instrument cluster sub-systems, LIN-based sensor nodes, CAN-based industrial motor controllers, and low-cost appliance controllers (washing machines, dishwashers, induction cookers). When designing with this device, ensure the BDM debug header is accessible for in-circuit programming and that the internal regulator's bulk capacitor (typically 100 nF plus 4.7 uF) is placed within 5 mm of the VREG pin. Operating beyond the specified 5.5 V maximum on VDD can latch up the part, and ADC accuracy degrades when the high-speed oscillator is not trimmed. This page synthesizes distributor inventory data, automotive-grade pin-compatible drop-in alternatives, and practical PCB and firmware design notes not found in the bare datasheet.

USD $5,22 Auf Lager
S9S12GN32F0MFT - 16-bit MCU, 32KB Flash, 25MHz HCS12 | NXP
S9S12GN32F0MFT

S9S12GN32F0MFT - 16-bit MCU, 32KB Flash, 25MHz HCS12 | NXP

The NXP S9S12GN32F0MFT is a 16-bit HCS12 (S12) family microcontroller delivering 25MHz CPU performance with 32KB on-chip Flash and 2KB RAM, housed in a 48-pin QFN-EP (7x7 mm) package with exposed thermal pad. It is part of the S12G family optimized for low-cost, high-performance, and low-pin-count automotive and industrial applications. The device integrates a CAN 2.0 A/B controller (msCAN) plus LIN/SAE J2602 slave support, making it well suited for automotive body and chassis networking nodes. What is a 16-bit microcontroller? A 16-bit microcontroller is an embedded computing device that processes data on a 16-bit-wide datapath and integrates CPU core, volatile and non-volatile memory, peripherals, and I/O onto a single die. It sits in the taxonomy as: microcontroller -> embedded MCU -> 16-bit MCU -> automotive-grade MCU -> semiconductor. The S12 family from NXP (formerly Freescale) is one of the longest-running 16-bit MCU architectures, used in hundreds of millions of vehicles globally for body, chassis, and safety subsystems. Key features include an HCS12 CPU core at 25 MHz bus speed, 32KB program Flash, 2KB SRAM, an 8-channel 10-bit ADC, a 16-bit timer/PWM module, and multiple serial interfaces including SPI, SCI (UART), and I2C. The on-chip msCAN 2.0 controller supplies automotive bus connectivity, and integrated LIN slaves support LIN 2.0/2.1/SAE J2602. The integrated voltage regulator supports a wide 3.15V to 5.5V supply range and multiple low-power stop and pseudo-stop modes for energy-conscious designs. AEC-Q100 qualification and an operating temperature range of -40C to +125C make the device viable for under-hood and body module environments. The 48-QFN-EP (7x7 mm) exposed-pad package provides a low thermal-resistance path, helping sustain continuous computational load in sealed enclosures. The internal PLL generates the 25 MHz bus from an external crystal or resonator. Typical applications include automotive body control modules, HVAC panels, instrument cluster subnodes, seat/window/mirror controllers, and CAN/LIN gateway nodes. The wide operating range and CAN/LIN dual-protocol support also fit industrial automation PLCs, sensor hubs, and low-cost motor-control peripherals. When designing with this MCU, ensure the E-pad is soldered to the PCB ground plane with sufficient thermal vias to meet -40 to +125C operation. Decouple VDD/VSS pairs with 100nF X7R ceramic capacitors placed within 3 mm of each pin pair, and connect unused I/O to defined logic levels to avoid CMOS shoot-through currents. This page synthesizes distributor pricing, AEC-Q100 validation notes, drop-in alternatives, and practical design guidance not found in the standalone manufacturer datasheet, helping procurement and firmware engineers evaluate the S9S12GN32F0MFT for production programs.

USD $2,04 Auf Lager
S9S12GN48F0CLH - 16-bit S12 MCU, 48KB Flash, 25MHz, 64-LQFP | NXP
S9S12GN48F0CLH

S9S12GN48F0CLH - 16-bit S12 MCU, 48KB Flash, 25MHz, 64-LQFP | NXP

The NXP S9S12GN48F0CLH is a 16-bit HCS12 CISC microcontroller with 48KB Flash memory, 25MHz CPU clock, 3.3V/5V supply, and 64-pin LQFP (10x10mm) package. The part is automotive-qualified and belongs to the S12G family, optimized for low-cost, high-performance, low pin-count applications. An MCU (microcontroller) is a single-chip computer containing a CPU core, program memory (Flash), working memory (RAM), and a set of on-chip peripherals such as timers, ADC, communication interfaces, and GPIO. Within the broader semiconductor hierarchy, MCUs sit under embedded processors, alongside DSPs and microprocessors. The S12G family is built on the HCS12 CISC core architecture, balancing code density with deterministic interrupt behavior favored in automotive body and chassis control. Key features of the S9S12GN48F0CLH include 48KB on-chip Flash for program storage, a 25MHz bus-compatible CPU, integrated peripherals supporting CAN and LIN/SAE J2602 communication, low-power run/wait/stop modes, and an on-chip voltage regulator allowing 5V or 3.3V single-supply operation. The 64-LQFP (10x10mm) footprint offers a balance between board density and ease of hand-rework during prototyping. Architecture-wise, the device uses a 16-bit CISC instruction set with enhanced addressing modes and supports up to 64KB linear address space with banked memory expansion. The integrated CAN module (msCAN) and LIN-compatible SCI/SAE J2602 interface enable networked body-electronics applications without an external transceiver MCU. Typical applications include automotive body controllers, HVAC control modules, seat and mirror modules, generic CAN/LIN nodes, sensor interface modules, and low-end industrial control boards. The wide operating temperature range and automotive-grade qualification also support rugged non-automotive environments. When designing with this part, ensure that the S12G clock-and-reset circuitry is initialized per the S12G family reference manual. BDM (background debug mode) pin handling is critical for in-circuit programming and should be reserved on the PCB even if unused during production. This page synthesizes distributor pricing, drop-in alternatives from the same S12G family, and practical design notes that go beyond the manufacturer reference manual to help engineers select and qualify the part faster.

USD $3,97 Auf Lager
S9S12GN48F0MLH - 16-bit 48KB Flash S12 MCU, 64-LQFP | NXP
S9S12GN48F0MLH

S9S12GN48F0MLH - 16-bit 48KB Flash S12 MCU, 64-LQFP | NXP

The NXP S9S12GN48F0MLH is a 16-bit HCS12 microcontroller from the S12G family, integrating 48 KB of Flash memory and running at 25 MHz, housed in a 64-pin LQFP (10x10 mm) package rated for the automotive -40C to +125C temperature range. The part belongs to the MC9S12G generation (silicon revision 'N'), and the 'F0' Flash stress-test designator indicates 100k endurance rating per the S12G datasheet family. Key parameters include a 12V1 HCS12 core, 1.5 KB EEPROM, 2 KB SRAM, 54 general-purpose I/O, and on-chip peripherals including a PWM, watchdog timer, low-voltage detect, power-on reset, and serial interfaces (IrDA, LINbus, SCI, SPI). A 16-bit microcontroller (MCU) is a programmable processor that fetches and executes instructions from on-chip memory using a 16-bit data path, sitting within the taxonomy: 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. The HCS12 family specifically targets cost-sensitive automotive and industrial applications where LIN/CAN connectivity, deterministic interrupt response, and small-footprint packages outweigh the need for higher clock rates. Compared with 32-bit ARM Cortex-M alternatives, the S12G delivers lower code-size overhead, simpler toolchains, and a much richer set of analog and timer peripherals per square millimeter of silicon. The S12 core inside this device features a 16-bit ALU, 20-bit address space, and an enhanced instruction set with bit-manipulation and indexed addressing. The 25 MHz bus clock produces 40 ns minimum instruction time. The 48 KB Flash supports in-application programming via the standard S12 BDM and serial bootloader paths. The 1.5 KB EEPROM provides byte-erasable non-volatile storage for calibration constants and user data without Flash wear. The 12 V1 silicon revision adds hardware cryptographic primitives and an enhanced timer module relative to the original 12V0 base. Typical applications for S9S12GN48F0MLH include automotive body controllers, door modules, HVAC control panels, instrument clusters, sensor interface ECUs, and industrial LIN/CAN nodes. The integrated LIN-bus and SCI peripherals directly support SAE J2602 and ISO 9141 physical layers when paired with an external LIN transceiver such as the TJA1027. Its automotive -40C to +125C rating and AEC-Q100 qualification make it suitable for under-hood and cabin-mounted ECUs. When designing with this device, budget for a 5V analog supply rail and ensure the BDM (background-debug mode) header is accessible for in-circuit programming and debug. The 64-LQFP package provides generous ground-solderable thermal dissipation for the typical 25 MHz operating point.

USD $2,18 Auf Lager
S9S12GN48F0VLFR - 16-bit S12 MCU, 48KB Flash, 25MHz | NXP
S9S12GN48F0VLFR

S9S12GN48F0VLFR - 16-bit S12 MCU, 48KB Flash, 25MHz | NXP

The NXP S9S12GN48F0VLFR is a 16-bit S12 microcontroller built on the HCS12 core architecture, delivering 25 MHz CPU performance with 48 KB of on-chip Flash and 48-pin LQFP (7x7 mm) packaging. The S12G family is optimized for low-cost, high-performance, low-pin-count applications requiring CAN or LIN/SAE J2602 communication, balancing 16-bit processing efficiency with automotive-grade robustness. Operating from a 3.3 V / 5 V supply across the -40 °C to +105 °C automotive temperature range, it targets generic automotive and industrial body, chassis, and networking applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals including timers, ADCs, communication controllers, and GPIO into one IC. Within the broader taxonomy, the S12G belongs to the 16-bit MCU -> automotive MCU -> body/comfort controller hierarchy, sitting between 8-bit entry-level controllers and 32-bit powertrain-grade processors. Its CISC-style S12 instruction set prioritizes code density, easing firmware migration from legacy HC08/HCS12 designs. Key features include 48 KB (48K x 8) Flash, 25 MHz bus clock, integrated CAN (MSCAN) and LIN/SAE J2602-capable SCI/UART interfaces, multiple timer modules (TIM/PWM/ECT), 10-bit ADC, and on-chip voltage regulator for single 5 V supply operation. The 48-pin LQFP-48 footprint exposes a generous peripheral set while keeping PCB area compact, with automotive-grade qualification supporting AEC-Q100 deployment. Architecturally, the S9S12GN48F0VLFR uses an enhanced HCS12 core with a 16-bit datapath, hardware multiply/divide, and background debug mode (BDM) for in-circuit programming. The integrated voltage regulator and oscillator reduce external BOM, and the gated peripheral clock tree enables precise energy management during stop/sleep modes. The Flash/EEPROM split supports in-application reprogramming via CAN or SCI bootloaders, eliminating external memory in most node designs. Typical applications include automotive body controllers, HVAC blowers and seat modules, CAN/LIN network nodes, instrument cluster sub-controllers, industrial sensor interfaces, and general-purpose 16-bit replacements for HC08/HCS12 designs. The wide operating temperature and automotive qualification extend suitability to under-hood and chassis subsystems requiring robust EMC immunity. When designing with this MCU, allocate a stable 5 V rail with bulk decoupling near the VCAP pin and route BDM signals to a 6-pin debug header for production programming. Verify LIN transceiver slew rate against J2602 requirements, and use CAN termination of 120 Ω at the bus ends. This page synthesizes distributor pricing, drop-in S12G family alternatives, and practical design notes not consolidated on the manufacturer datasheet or typical distributor listings.

USD $5,10 Auf Lager
S9S12H128J1VFVER - 16-bit HCS12 MCU, 128KB Flash | NXP
S9S12H128J1VFVER

S9S12H128J1VFVER - 16-bit HCS12 MCU, 128KB Flash | NXP

The NXP Semiconductors S9S12H128J1VFVER is a 16-bit HCS12 CISC microcontroller with 128KB Flash, 4KB EEPROM, 6KB RAM and a maximum bus clock of 50 MHz, powered from a single 5V supply and housed in a 144-pin LQFP (VFV) gull-wing surface-mount package supplied in tape and reel. A microcontroller unit (MCU) is a single-chip computer that integrates a processor core, program memory, data memory and peripherals such as timers, serial interfaces and analog-to-digital converters. Within the semiconductor hierarchy, the S9S12H128 belongs to the 16-bit MCU class, itself a subset of embedded processors used wherever deterministic, low-cost control is needed. The HCS12 family descends from the industry-proven 68HC11 architecture, extended to full 16-bit data paths throughout the core. Key features include the HCS12 CPU with CISC instruction set, a CRG clock-and-reset generator combining a low-current oscillator, PLL, COP watchdog, real-time interrupt and clock monitor, plus 8-bit and 4-bit I/O ports with interrupt and wake-up capability from STOP mode. The integrated 10-bit, 16-channel ADC directly digitizes sensor inputs without an external converter, a significant cost and board-space saving in automotive and industrial designs. Technically, the PLL allows system performance and power consumption to be traded dynamically: designers can run at reduced clock rates to save power, then step up to 50 MHz bus speed for computationally demanding tasks such as CAN communication or motor control loops. The 128KB Flash EEPROM supports in-system programming, while the separate 4KB EEPROM retains calibration data through power cycles. Typical applications include automotive body electronics, instrument clusters, HVAC controllers, industrial machine control, and building automation nodes that require robust 5V noise immunity and an automotive-qualified AEC-Q100 device. Design consideration: because the bus derives from the PLL, budget PLL lock time and COP watchdog servicing into your startup code, and verify 5V rail sequencing against the CRG reset thresholds. This page synthesizes distributor pricing data, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

USD $7,95 Auf Lager
S9S12H128J1VPVER - 16-Bit 50MHz 128KB Flash MCU | NXP
S9S12H128J1VPVER

S9S12H128J1VPVER - 16-Bit 50MHz 128KB Flash MCU | NXP

The NXP S9S12H128J1VPVER is a 16-bit HCS12 automotive-qualified microcontroller operating at 50 MHz, with 128 KB of flash memory and a 112-pin LQFP package measuring 20 mm by 20 mm. It operates across the -40°C to +105°C temperature range and is identified with the VPVER package designation. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one device. This HCS12 MCU belongs to the embedded-controller hierarchy: 16-bit MCU → HCS12 microcontroller → embedded processing → automotive electronics. It is intended for systems requiring deterministic embedded control, serial communication, timing, and analog or digital interface functions. The verified source data identifies the HCS12 CPU, 16-bit architecture, 50 MHz operating frequency, and 128 KB flash organized as 128K × 8. The 112-LQFP package supports surface-mount assembly, while the automotive qualification and -40°C to +105°C rating suit equipment operating across extended temperature conditions. Exact RAM, supply voltage, peripheral list, and memory endurance are not supplied and are therefore not inferred. Within an embedded design, the MCU can serve as the central controller for automotive body, chassis, powertrain-adjacent, sensor, and communication subsystems. The 128 KB program-memory capacity provides room for boot code, application logic, diagnostics, and communication handlers. The 50 MHz clock rating enables time-sensitive control tasks, although real timing performance must be evaluated against the selected peripherals, bus architecture, memory wait states, and firmware workload. Typical integration places the MCU beside power regulation, sensing, actuation, and communication circuitry. Inputs should be checked against the manufacturer electrical limits, while unused pins must follow the official pin-multiplexing and termination guidance. Because only the summarized distributor information was supplied, no detailed pin names, peripheral assignments, or electrical limits should be inferred without the official device documentation. When sourcing this part, verify the exact package, temperature grade, flash configuration, qualification status, and ordering suffix. The supplied data shows distributor listings from Rochester Electronics and NXP, but it does not provide a manufacturer datasheet URL, lifecycle declaration, price, or confirmed production status. This page therefore separates verified facts from unavailable technical and commercial fields rather than extrapolating them.

Angebot Auf Lager
S9S12H128J2VFVE - 16-bit S12 MCU 128KB Flash 50MHz | NXP
S9S12H128J2VFVE

S9S12H128J2VFVE - 16-bit S12 MCU 128KB Flash 50MHz | NXP

The NXP S9S12H128J2VFVE is a 16-bit HCS12 microcontroller built around the standard S12 core, integrating 128KB of on-chip Flash and operating at 50MHz. Housed in a 144-pin LQFP package, it is automotive-qualified and rated for the -40C to +105C industrial/automotive temperature range, making it well-suited for body and chassis applications that demand deterministic 16-bit performance. A microcontroller (MCU) is a single-chip computer containing a CPU, program and data memory, and a set of on-chip peripherals. The HCS12 core is an enhanced evolution of the HC11 architecture with a 16-bit data path, a richer instruction set, and higher code efficiency for embedded control. Within the broader semiconductor taxonomy, this part sits as a microcontroller -> embedded processor -> semiconductor device. Key features include 128KB Flash for application code and a 50MHz CPU core, full CAN and LIN connectivity for in-vehicle networking, an enhanced capture/timer and PWM module (ECT) for motor and actuator control, and a 10-bit analog-to-digital converter for sensor acquisition. The 144-LQFP footprint exposes a wide peripheral set: SCI/SPI, I2C, multiple timer channels, and a robust interrupt controller. The S12H silicon was designed for cost-sensitive automotive body controllers, HVAC panels, instrument clusters, and DC motor control nodes. Its peripheral-rich architecture lets designers replace external logic with on-chip modules, reducing BOM count while keeping deterministic interrupt latency for safety-critical loops. Typical applications include automotive body control modules (BCM), HVAC door and blower control, instrument cluster slaves, and LIN/CAN-based sensor nodes. The wide temperature range and on-chip CAN make it equally attractive for industrial PLC I/O expanders and remote sensor hubs. When designing with this part, pay attention to the 5V supply rail tolerance and provide adequate decoupling near the multiple VDD pins. Use NXP's CodeWarrior or the GCC S12 toolchain with a BDM interface for in-circuit debug, and consult the S12H reference manual for peripheral allocation to avoid conflicts on shared pins. This page synthesizes distributor pricing, NXP/Freescale part-family alternatives, and practical design notes not found in a single source, giving an engineer a one-stop reference for the S9S12H128J2VFVE.

USD $8,60 Auf Lager
S9S12H256J1VFV - 16-Bit 50MHz 256KB MCU | NXP
S9S12H256J1VFV

S9S12H256J1VFV - 16-Bit 50MHz 256KB MCU | NXP

The NXP Semiconductors S9S12H256J1VFV is a 16-bit HCS12 microcontroller operating at 50 MHz with 256 KB of Flash memory, 6K x 8 RAM, 85 I/O, and eight 10-bit A/D converters in a 144-LQFP 20 x 20 mm package. Its 2.35 V to 5.25 V supply range and -40°C to +105°C operating-temperature specification support industrial and embedded control designs. A microcontroller is a programmable integrated circuit containing a processor core, memory, peripherals, and input/output interfaces. The HCS12 architecture belongs to the embedded-microcontroller hierarchy rather than a host processor: it executes firmware, reads sensors, controls actuators, and manages communication tasks in a compact industrial or automotive-adjacent control system. This S9S12H device combines a deterministic 16-bit CPU with substantial on-chip Flash and RAM for standalone embedded control. The headline configuration combines a 50 MHz core with 256 KB of Flash and 6K x 8 RAM. The distributor data also identifies 85 I/O and an 8-channel, 8x8/10-bit A/D converter block. These resources support protocol handling, timing tasks, digital control, data acquisition, and mixed signal monitoring without requiring a separate processor for many common embedded functions. The large 144-pin LQFP exposes substantially more signal connectivity than a small 32- or 64-pin microcontroller package. The S9S12H256J1VFV is identified as an HCS12 microcontroller rather than an FPGA, DSP, or analog device. Its 16-bit bus-oriented architecture is suited to embedded control logic, while its Flash memory supports field-updateable application firmware. The 85 available I/O provide a substantial interface budget for digital buses, switches, indicators, actuators, and external peripheral control signals, subject to the exact pin multiplexing and electrical limits in the manufacturer datasheet. Typical uses include industrial automation controllers, motor and motion-control equipment, sensor-acquisition systems, communications equipment, test fixtures, and embedded instrumentation. For these applications, the 50 MHz clock and 256 KB Flash configuration provide useful headroom for concurrent interrupt-driven tasks. The eight-channel 10-bit A/D converter block is particularly relevant when analog measurements must share a digital control platform. When designing a PCB around this device, use the manufacturer pinout and package drawing rather than inferring connections from the 144-pin count. Keep power, ground, decoupling, clock, reset, programming, and debug routing consistent with the datasheet. Validate analog-input conditioning, unused-pin handling, external memory timing if used, and thermal performance across the full -40°C to +105°C range. This page consolidates verified distributor specifications, datasheet-oriented procurement information, practical integration guidance, and honest replacement limits. It does not invent an official manufacturer PDF because the provided search results link to distributor and catalog pages rather than a confirmed NXP-hosted datasheet.

Angebot Auf Lager
S9S12H256J1VFVE - 16-bit HCS12 MCU, 256KB Flash, 144-LQFP | NXP
S9S12H256J1VFVE

S9S12H256J1VFVE - 16-bit HCS12 MCU, 256KB Flash, 144-LQFP | NXP

The NXP Semiconductors S9S12H256J1VFVE is a 16-bit HCS12-family microcontroller built around the HCS12 CPU core, delivering 50 MHz maximum bus clock performance, 256 KB of on-chip FLASH program memory, 12 KB of data RAM, and 4 KB of data EEPROM, all integrated in a 144-pin LQFP package qualified to the -40 °C to +105 °C automotive temperature range. An automotive-grade microcontroller (MCU) is a microcontroller that has been designed, characterized, and qualified to operate reliably in the harsh electrical and thermal environments of a vehicle. Within the broader product hierarchy, MCUs sit inside the Integrated Circuits category; the S9S12H256J1VFVE specifically belongs to the 16-bit HCS12 sub-family of NXP/Freescale S12 microcontrollers, which are widely deployed in body, chassis, and powertrain electronic control units (ECUs). The HCS12 core is a CISC architecture with full 16-bit data paths, and the part name's suffix 'H256' indicates 256 KB of FLASH, while 'J1VFVE' decodes to LQFP-144 package, automotive grade, tape-and-reel packaging. Key features include 256 KB FLASH, 12 KB RAM, 4 KB EEPROM, 50 MHz maximum CPU clock, a PLL block for adjustable speed/power trade-offs, multiple timers including a 16-bit Enhanced Capture Timer and an 8-bit Pulse-Width Modulator (PWM) module, an MSCAN (CAN 2.0 A/B) controller, an SPI peripheral, an asynchronous/synchronous SCI serial interface, plus 12 general-purpose I/O pins with interrupt and wake-up capability from STOP or pseudo-STOP modes. The 144-pin LQFP footprint exposes all major buses and analog inputs for body-controller and instrument-cluster applications. The internal bus matrix is fed by an on-chip PLL that allows the bus clock to be derived from a low-frequency external crystal, reducing electromagnetic emissions and quiescent current. ECC on the FLASH array and a separate EEPROM block allow robust in-field parameter storage, which is required for adaptive automotive software. The HCS12 core executes CISC instructions in 1-5 bus cycles, providing deterministic interrupt latency for real-time control loops. Typical applications include automotive body controllers, instrument clusters, HVAC control modules, lighting controllers, door/seat modules, and industrial CAN nodes where a 16-bit automotive MCU is required. The part is also used in legacy industrial PLCs and stepper/servo controllers that already have an HCS12 firmware base. The wide -40 °C to +105 °C automotive temperature range and on-chip CAN make it suitable for in-cabin and under-hood controllers. When designing with this part, provide a 5 V-tolerant decoupling network on each VDD/VSS pair, route the ECLK/XIRQ/IRQ reset chain with short traces, and use the internal PLL with a 4 MHz-16 MHz crystal to derive the 50 MHz bus clock. Always enable the COP watchdog and configure the MSCAN baud rate using a 16 MHz oscillator reference for CAN 2.0B operation at 1 Mbit/s. This page synthesizes NXP/Freescale distributor pricing, drop-in LQFP-144 alternatives from the S9S12H and S12X families, automotive-grade compliance notes, and practical design guidance that go beyond the manufacturer datasheet.

USD $10,50 Auf Lager
S9S12H256J1VFVER - 16-Bit 256KB MCU 50MHz | NXP
S9S12H256J1VFVER

S9S12H256J1VFVER - 16-Bit 256KB MCU 50MHz | NXP

The NXP S9S12H256J1VFVER is a 16-bit HCS12 CISC microcontroller operating up to 50 MHz, with 256 KB of flash memory and a 144-pin QFP package. The verified listing identifies automotive-qualified construction for operation from -40°C to +105°C. Its 16-bit architecture, standard on-chip peripherals, and broad I/O capability target embedded control, automotive, and industrial applications requiring deterministic control performance and substantial program memory. A microcontroller is a semiconductor device that integrates a CPU core, memory, I/O ports, timers, communication interfaces, and other peripherals into one embedded-control platform. The S9S12 family belongs to the HCS12 16-bit MCU hierarchy and is designed to support both control loops and communication-oriented embedded systems. A phase-locked loop allows power consumption and performance to be adjusted, while full 16-bit data paths simplify arithmetic operations in control and monitoring systems. The key verified features are a 50 MHz maximum operating frequency, 256 KB of flash, 16-bit CPU architecture, 144 QFP packaging, and an extended -40°C to +105°C temperature range. The device also provides 12 general-purpose I/O pins with interrupt and wake-up capability from STOP mode, according to the NXP product-page information associated with the S9S12H256 family. These characteristics make the MCU suitable for automotive body and chassis electronics, industrial controllers, and other embedded systems operating in demanding thermal environments. The HCS12 CPU core uses a CISC-style architecture and provides full 16-bit data paths. Its integrated PLL supports configurable performance and power-state management, which helps designers balance throughput against current consumption. The integrated flash memory supports firmware storage, while the peripheral set provides the foundation for digital I/O, timing, serial communication, interrupts, and low-power control. Exact peripheral counts, voltage ratings, electrical limits, and package dimensions require confirmation in the manufacturer datasheet. Typical applications include automotive body-control modules, instrument-cluster electronics, actuator controllers, industrial control panels, and compact embedded systems. The extended temperature range supports harsh operating environments, while the 144-pin package provides access to the device's peripheral and I/O resources. The 50 MHz CPU speed is useful for coordinating multiple real-time tasks, but designers should confirm clock, memory, and interrupt requirements against the complete device documentation. A key design consideration is validating the exact electrical limits, peripheral multiplexing, and pin assignments before schematic capture. Because the available verified data does not include the complete pinout, power-supply range, or detailed memory map, those values should be taken directly from the official NXP datasheet rather than inferred. This product data combines verified manufacturer and distributor information with application guidance, engineering caveats, and a strict evidence trail. Pricing, lead time, lifecycle status, and unavailable technical parameters are not asserted when they are not present in the supplied data.

Angebot Auf Lager
S9S12H256J1VFVR - 16-Bit 50MHz 256KB MCU | NXP
S9S12H256J1VFVR

S9S12H256J1VFVR - 16-Bit 50MHz 256KB MCU | NXP

The NXP Semiconductors S9S12H256J1VFVR is a 16-bit HCS12 automotive microcontroller operating at 50 MHz, with 256 KB of flash memory and a 144-LQFP 20 mm by 20 mm package. The verified distributor listing also identifies 2.5 V or 5 V automotive operation. These headline specifications place the device in the HCS12 family of 16-bit MCUs, within the broader embedded microcontroller and semiconductor hierarchy. A microcontroller integrates a processor core, nonvolatile program memory, data memory, peripherals, and communication interfaces into one embedded-control component. In this case, the HCS12 platform is suitable for automotive body, chassis, comfort, gateway, and distributed-control systems where a dedicated MCU must execute control software and manage digital inputs and outputs. The 50 MHz clock provides substantially more instruction throughput than an 8-bit MCU, while 256 KB of flash provides dedicated space for application code, calibration data, and diagnostic routines. The S9S12H256J1VFVR is identified as an automotive MCU and is supplied in a 144-pin LQFP package. The 144-pin count offers more external interface and power options than smaller 16-bit packages, which can help when a design requires multiple communication channels, analog inputs, timer outputs, or control signals. Tape-and-reel ordering is indicated by the distributor listing. Detailed RAM capacity, peripheral inventory, operating-temperature limits, flash endurance, and electrical maximums are not present in the supplied evidence and therefore remain unverified here. At 50 MHz with 256 KB of program flash, this device is positioned for embedded automotive workloads that need more control headroom than an entry-level 8-bit MCU. It can serve as the central controller for actuator logic, sensor aggregation, body-control modules, or communication gateways, provided the complete peripheral set and electrical limits are checked against the manufacturer datasheet before design release. Software compatibility should likewise be confirmed through the device errata, reference manual, and automotive qualification documentation rather than inferred from the orderable MPN alone. The most important design consideration is package and firmware validation. A 144-LQFP footprint is relatively large and requires careful PCB escape routing, decoupling, ground planning, and assembly-process control. The verified distributor material confirms the package family and core attributes but does not provide the complete pin map, so engineers must obtain the official documentation before assigning signals or designing the land pattern. Firmware should also be qualified against the exact silicon revision and any applicable errata. This page consolidates the verified distributor identity, core performance, memory, package, voltage-marketing information, sourcing context, and replacement constraints for S9S12H256J1VFVR. It separates confirmed specifications from missing technical fields and does not present unverified pin, peripheral, temperature, or lifecycle claims as facts. Contact XAIPART for current quotation, traceability, availability, and source inspection requirements.

Angebot Auf Lager
S9S12H256J1VPVER - 16-Bit 50MHz 256KB Flash MCU | NXP
S9S12H256J1VPVER

S9S12H256J1VPVER - 16-Bit 50MHz 256KB Flash MCU | NXP

The NXP Semiconductors S9S12H256J1VPVER is a 16-bit automotive-qualified microcontroller with a 50 MHz S12 core, 256 KB flash memory, and a 112-LQFP 20 x 20 mm package. According to the verified distributor data, it operates from -40°C to +105°C and is identified as an S12 microcontroller with 256 bytes represented as 256 x 8 flash organization. A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals into one integrated circuit. The S9S12H256J1VPVER belongs to the S12 family and provides embedded control for automotive and industrial systems requiring deterministic digital control, communication, timing, and peripheral integration. Its 50 MHz core provides a useful balance between processing capability, power consumption, and system complexity for embedded applications. Verified listing data highlights the device as a 16-bit MCU with 256 KB flash, 50 MHz operation, 112-LQFP packaging, and automotive qualification. The package provides 112 external leads, making it appropriate for designs that require a conventional leaded package rather than a fine-pitch BGA. The listed operating temperature range of -40°C to +105°C supports use across extended industrial and automotive temperature environments, subject to the complete manufacturer datasheet and application requirements. The S9S12H256J1VPVER is suitable for vehicle body-control modules, sensor interfaces, actuator controllers, instrumentation, industrial automation, and embedded communication equipment. Its 256 KB flash capacity allows embedded firmware, configuration data, boot code, and application logic to be stored locally. The 50 MHz operating frequency supports responsive control loops and event-driven peripheral handling when paired with correctly selected external components. When selecting this MCU, verify the exact pin functions, electrical limits, peripheral set, memory organization, clock configuration, and automotive qualification requirements in the manufacturer datasheet before layout or firmware deployment. Because this product data is based on verified distributor and search-result records, unprovided electrical details remain intentionally marked for data acquisition rather than estimated. This page combines verified S9S12H256J1VPVER specifications, sourcing information, structured product data, and practical engineering context to support component identification, procurement, comparison, and design review.

Angebot Auf Lager
S9S12H256J2VFVER - 16-bit 50MHz 256KB MCU | NXP | Automotive
S9S12H256J2VFVER

S9S12H256J2VFVER - 16-bit 50MHz 256KB MCU | NXP | Automotive

The NXP S9S12H256J2VFVER is a 16-bit HCS12 automotive-qualified microcontroller with a 256KB (256K x 8) FLASH program memory, 12KB RAM, 2KB EEPROM, and a 50MHz bus-derivable clock from an S12 core, housed in a 144-pin LQFP (20x20 mm) package rated from -40C to +105C. A microcontroller unit (MCU) is a single-chip embedded computer that integrates a processor core, non-volatile program memory, data memory, and peripherals such as timers, communication interfaces, and analog converters on one die. Within the hierarchy of semiconductors, the MCU sits at the heart of embedded control systems: a 16-bit MCU like the HCS12 family occupies the segment between 8-bit controllers and 32-bit ARM-based processors, offering wider data paths and higher computational throughput while retaining the deterministic, single-cycle-friendly architecture favored in real-time control. The S9S12H256J2VFVER belongs to the MC9S12H128/HCS12 family, composed of standard on-chip peripherals built around the HCS12 CPU with full 16-bit data paths throughout. An integrated PLL circuit allows power consumption and performance to be adjusted dynamically, letting designers trade clock speed against current draw. Twelve additional general-purpose I/O pins feature interrupt and wake-up capability from STOP or WAIT low-power modes, which is essential for battery-backed or intermittently active automotive nodes. Automotive qualification (per the S9S12 prefix and -40/+105C ambient rating) makes this part suitable for under-hood-adjacent and body-electronics environments where AEC-Q-grade reliability is expected. The 256KB FLASH supports in-system reprogramming for calibration updates, and the 2KB EEPROM preserves parameters across power cycles without external memory. The 144-pin LQFP provides generous port count for clusters of switches, sensors, lamps, and communication transceivers. Typical applications include automotive body control modules, instrument clusters, door and seat control units, HVAC controllers, and industrial machinery requiring a wide temperature range and large I/O count. Its 50MHz performance headroom accommodates complex state machines and CAN/LIN protocol stacks. Design considerations: plan the clock tree around the PLL for EMC compliance, and budget RAM carefully since 12KB constrains large buffers; the VFV temperature suffix demands derating of junction temperature at high ambient. This page synthesizes distributor pricing context, same-family drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet, with all core specifications verified against NXP product data as of 2026-10-18.

Angebot Auf Lager
S9S12HA32J0CLL - 16-bit 32MHz 32KB Flash MCU | NXP
S9S12HA32J0CLL

S9S12HA32J0CLL - 16-bit 32MHz 32KB Flash MCU | NXP

The NXP S9S12HA32J0CLL is a 16-bit HCS12 automotive-qualified microcontroller running at 32 MHz with 32 KB flash and 2 KB RAM, housed in a 100-pin LQFP (14x14 mm) package. A microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and peripherals onto one die, forming the lowest level of the embedded-computing hierarchy: semiconductor -> integrated circuit -> microcontroller unit. The S12HY family belongs to the HCS12 16-bit CISC lineage originally developed by Freescale Semiconductor (now NXP Semiconductors), widely used in cost-sensitive automotive body electronics. Key features include a 32 MHz HCS12 core with 16-bit CISC architecture, 32KB (32K x 8) flash program memory, 2 KB RAM, and 80 general-purpose I/O lines. Connectivity peripherals cover EBI/EMI, I2C, IrDA, LINbus, SCI, and SPI, while on-chip peripherals include an LCD driver, motor-control PWM, POR, PWM, and a watchdog timer (WDT). These integrated drivers reduce external component count in instrument-cluster designs. The S12HY family differentiates itself through customized automotive features such as the integrated LCD driver and stepper-motor driver, allowing direct drive of gauge needles and segment displays without companion ICs. The device operates from a 5V supply across -40C to +85C and carries automotive qualification, targeting emerging-market vehicle platforms where cost per cluster is critical. Typical applications include automotive instrument clusters with LCD segments and stepper-motor gauges, CAN/LIN networked body-control nodes, and industrial HMI panels requiring segment LCD drive. Design consideration: confirm flash sizing early - at 32 KB, code headroom is limited once CAN/LIN stacks and LCD refresh routines are included; larger-family parts are pin-compatible upgrade paths. This page synthesizes distributor pricing context, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet alone.

Angebot Auf Lager
S9S12HN64J3VAA - 16-bit S12 MCU, 64KB Flash, 50MHz, QFP-80 | NXP
S9S12HN64J3VAA

S9S12HN64J3VAA - 16-bit S12 MCU, 64KB Flash, 50MHz, QFP-80 | NXP

The NXP S9S12HN64J3VAA is a 16-bit HCS12-family microcontroller built around the S12 CPU core, integrating 64KB of on-chip Flash, 50MHz maximum bus frequency, 85 general-purpose I/O lines, and AEC-Q100 automotive qualification, all packaged in an 80-pin QFP (QFP 80, gull-wing lead form). An MCU (microcontroller) is a single-chip computer that integrates a CPU core, program and data memory, plus a configurable set of peripherals (timers, ADC, communication controllers, GPIO) onto one die. The S12 family sits in the broader taxonomy MCU -> 16-bit microcontroller -> automotive microcontroller -> HCS12 family -> NXP (formerly Freescale) S12H sub-family. Its role in the system hierarchy is to consolidate deterministic real-time control, on-board non-volatile storage, and a rich peripheral set into one automotive-qualified component, eliminating the need for an external memory bus and reducing BOM count. Key features that define this part include 64KB of Flash program memory, 4KB of RAM, an on-chip 12-bit ADC for analog sensing, multiple timer modules supporting PWM and capture/compare, SCI/SPI/I2C serial interfaces for inter-IC communication, and a CAN 2.0 controller for in-vehicle networking. The S9S12HN64J3VAA operates across a 2.5V to 5V supply range and over the -40C to +105C automotive temperature grade, making it suitable for under-hood and instrument-cluster environments. The 80-pin QFP offers generous I/O count and good thermal performance. Technically, the S12 core implements a 16-bit Von Neumann architecture with byte-level addressing, supporting both C and assembly development under CodeWarrior and the modern S32 Design Studio toolchain. The integrated Enhanced Capture Timer (ECT) module and 8-channel 10-bit/12-bit ADC simplify sensor interface designs common in body and chassis ECUs. Background debug mode (BDM) is supported for non-intrusive in-circuit emulation. Typical applications include automotive instrument clusters, body control modules (BCM), HVAC controllers, anti-lock brake system (ABS) sensor conditioning, CAN node endpoints, and general-purpose industrial real-time control requiring automotive-grade reliability. The 50MHz CPU provides sufficient headroom for sensor-fusion and PWM-heavy motor control loops. When designing with the S9S12HN64J3VAA, follow NXP application note AN2400 (S12 oscillator and clocking) for crystal selection and PCB layout. Place VDD/VSS decoupling capacitors within 5mm of each supply pin pair, and route the BDM interface to a 6-pin header for firmware development and field service. This page synthesizes verified distributor stock levels, drop-in same-package alternatives, parametric comparisons, and practical design notes not found in the standalone manufacturer datasheet.

USD $9,75 Auf Lager
S9S12HY32J0MLH - 16-bit HCS12 MCU, 32KB Flash, 32MHz | NXP
S9S12HY32J0MLH

S9S12HY32J0MLH - 16-bit HCS12 MCU, 32KB Flash, 32MHz | NXP

The NXP S9S12HY32J0MLH is a 16-bit HCS12 CISC microcontroller with 32KB Flash, 2KB RAM, 50 I/O pins, integrated LCD/stepper motor driver peripherals, and 32MHz CPU clock, housed in a 64-pin LQFP (10x10 mm) package qualified to AEC-Q100 automotive grade (-40°C to +125°C). It belongs to NXP's S12HY family of CAN MCUs designed for cost-effective instrument cluster and human-machine interface (HMI) applications. Key features include 32KB on-chip Flash program memory (32K x 8), 2KB SRAM data memory, a built-in LCD driver supporting segment-style displays commonly found in instrument clusters, a stepper motor driver for gauge movements, an integrated CAN 2.0 controller for in-vehicle networking, and a 16-bit timer/PWM module. The device operates from a 5V supply (with 3.3V I/O variants in the same family) and uses an internal oscillator for clock generation. From an architectural standpoint, the S9S12HY32J0MLH leverages the proven HCS12 CPU core with CISC instruction set, enhanced interrupt handling, and BDM (Background Debug Mode) for non-intrusive in-circuit debugging. The 32MHz bus clock supports deterministic real-time control loops required for stepper motor driving and signal acquisition. On-chip peripherals are mapped to fixed memory addresses for predictable interrupt latency. Typical applications include automotive instrument clusters (speedometer, tachometer, fuel gauges), body control modules, HVAC panels, seat control units, and industrial HMI panels with LCD readouts. The integrated stepper motor driver and LCD driver eliminate the need for external driver ICs, reducing BOM cost and PCB area. When designing with this device, ensure the 5V analog supply is well-decoupled near the AVSS pin, use proper ESD protection on exposed HMI connectors, and follow NXP AN3300 layout recommendations for mixed-signal automotive PCBs. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes not found in the manufacturer datasheet alone - useful for engineers designing around long-lifecycle automotive parts and procurement teams seeking lifecycle risk mitigation options.

USD $4,80 Auf Lager
S9S12HY32J0VLL - 16-bit S12 MCU 32KB Flash 32MHz | NXP
S9S12HY32J0VLL

S9S12HY32J0VLL - 16-bit S12 MCU 32KB Flash 32MHz | NXP

The NXP Semiconductors S9S12HY32J0VLL is a 16-bit HCS12-family microcontroller built around the S12 CPU core, integrating 32KB of on-chip Flash, 2KB of RAM, and a 32MHz bus clock in a 100-pin LQFP (14x14 mm) surface-mount package. The part is rated for -40C to +105C and qualified per NXP's automotive-grade flow, targeting instrument-cluster and body-electronics designs. A 5V-tolerant mixed-signal front end and on-chip peripherals (LCD driver, stepper-motor predriver, MSCAN, SCI/SPI) round out the device. The 'V' suffix in 'J0VLL' designates the 105C automotive temperature grade and LQFP-100 package. What is an automotive 16-bit MCU? An automotive 16-bit microcontroller is a Flash-based, von-Neumann-class CISC processor designed for cost-sensitive, real-time automotive and industrial subsystems such as instrument clusters, body controllers, HVAC panels, and sensor interfaces. The HCS12 family sits in the wider NXP (formerly Freescale) S08/S12/S12X/S32K microcontroller hierarchy: 8-bit S08 -> 16-bit S12/S12X -> 32-bit S32K/Cortex-M. Compared with 32-bit Cortex-M parts, HCS12 MCUs trade raw Dhrystone throughput for lower cost, integrated LCD/stepper analog blocks, and a mature CodeWarrior/S12Z toolchain. Key differentiating features of S9S12HY32J0VLL include a 32MHz S12 core with BDM debug, up to 32KB on-chip Flash, an integrated LCD driver suitable for TN segment glass, a stepper-motor predriver that removes external H-bridges, and an MSCAN (CAN 2.0A/B) module for in-vehicle networking. The part is AEC-Q100 aligned per NXP's automotive-grade specification, and the 100-LQFP footprint gives enough I/O for cluster backlighting and switch-matrix scanning. Technically, the S12HY silicon combines the CPU12 core with a peripheral co-processor bus, an on-chip bandgap reference, and a regulated internal core voltage, allowing 5V supply operation with 3.3V GPIO logic levels through VREG. Flash endurance is rated at the typical 10k-cycle minimum, and EEPROM emulation is supported through a dedicated partition of the Flash array. The 32MHz bus speed is generated from an internal PLL fed by an external crystal or resonator. The S9S12HY32J0VLL is typically used in automotive instrument clusters, two-wheeled vehicle dashboards, HVAC control panels, and CAN-connected sensor nodes. The integrated LCD driver makes it a natural fit for monochrome TN glass up to 4x40 segments, while the stepper predriver supports gauge needles. When designing with this part, ensure the external supply decoupling follows NXP AN2624 reference design: 100nF plus 10uF bulk on VDDX/VDDR, and place the resonator within 5mm of the XTAL pins. The LCD charge-pump capacitor must be a low-leakage ceramic (C0G/NP0) to avoid contrast drift at high temperature.

USD $5,48 Auf Lager
S9S12HY64J0CLH - 16-Bit 32MHz 64KB Flash HCS12 MCU | NXP
S9S12HY64J0CLH

S9S12HY64J0CLH - 16-Bit 32MHz 64KB Flash HCS12 MCU | NXP

The NXP (formerly Freescale) S9S12HY64J0CLH is a 16-bit HCS12 microcontroller with 64KB Flash, 4KB RAM, and a 32MHz core speed, housed in a 64-pin LQFP package designed for automotive instrument cluster and body electronics applications. It integrates CAN, LCD driver, stepper motor driver, and LIN/J2602 interfaces in a single device, making it a system-in-package for entry-level automotive dashboards. A microcontroller (MCU) is a single-chip computer containing a CPU core, memory (Flash/RAM), and programmable peripherals. The 16-bit HCS12 family belongs to NXP's S12 automotive MCU platform, which sits in the broader taxonomy of embedded controllers -> microcontrollers -> automotive microcontrollers -> HCS12 series. The S12HY sub-family is specifically optimized for human-machine interface (HMI) subsystems including instrument clusters and body control modules. Key features include 64KB on-chip Flash memory, 4KB RAM, an LCD driver supporting segment displays, an integrated stepper motor controller for analog gauge movements, one CAN 2.0 module, LIN/J2602 SCI channels, and a 32MHz bus clock derived from an internal Phase-Lock Loop. The device operates across -40C to +85C industrial temperature range and supports background debug mode (BDM) for non-intrusive in-circuit programming. The S9S12HY64J0CLH uses the standard S12 CPU core with instruction set compatibility back to the HC11 family, simplifying migration for legacy automotive designs. Its on-chip voltage regulator supports a single 5V supply while generating internal 2.5V and 1.8V rails for the core logic, eliminating external DC-DC components. A 16-channel Analog-to-Digital Converter (ATD), PWM timers, and GPIO with interrupt capability round out the peripheral set. Typical applications include two-wheeler instrument clusters, entry-level automotive dashboards, body controllers with CAN/LIN gateways, HVAC control panels, and white-goods HMI modules. The integrated LCD and stepper motor drivers reduce external component count, directly lowering BOM cost for cost-sensitive automotive programs. When designing with this MCU, allocate the 64KB Flash budget carefully because the automotive real-time operating environment typically consumes 8-12KB for the CAN/LIN/LCD stack, leaving roughly 50KB for application code. Use BDM for production programming rather than the SCI bootloader to avoid tying up the diagnostic SCI channel. This page synthesizes distributor pricing, drop-in S12HY family alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a faster path to qualified sourcing decisions.

USD $5,85 Auf Lager
S9S12HY64J0VLL - 16-bit HCS12 MCU 64KB Flash 32MHz | NXP
S9S12HY64J0VLL

S9S12HY64J0VLL - 16-bit HCS12 MCU 64KB Flash 32MHz | NXP

The NXP Semiconductors S9S12HY64J0VLL is a 16-bit HCS12 automotive microcontroller with a 64KB (64K x 8) flash memory, a 32MHz S12 core, and an integrated LCD driver and stepper motor driver, housed in a 100-pin LQFP (14 x 14 mm) package and qualified for -40C to +105C automotive operation. A 16-bit microcontroller is a self-contained computing device whose arithmetic logic unit processes 16-bit words in a single instruction cycle, occupying the middle of the embedded hierarchy between 8-bit MCUs and 32-bit automotive MCUs. The HCS12 (S12) architecture, originally developed by Freescale Semiconductor and now part of NXP, is a widely adopted platform in automotive body, dashboard, and control applications where proven toolchains and long lifecycle support matter. Key features of this device include 64KB of on-chip flash program memory for application code, a 32MHz bus-capable S12 core, an integrated LCD driver that reduces external component count in gauge designs, and a dedicated stepper motor driver for gauge pointer actuation. CAN and LIN/J2602 communication interfaces support in-vehicle networking, which is essential for modern instrument clusters that must exchange diagnostic and driving data with the vehicle network. Technically, the S12HY family targets entry-level instrument clusters: the combination of LCD drive capability, stepper motor control, CAN/LIN connectivity, and automotive qualification on a single die lets designers replace multi-chip solutions with one MCU, lowering BOM cost and board area. The 100-LQFP square gull-wing package provides 100 terminals with 0.5 mm pitch, supporting standard surface-mount assembly processes. Typical applications include entry-level automotive instrument clusters with LCD and stepper-gauge outputs, generic automotive control nodes requiring CAN or LIN/J2602 communication, and industrial systems needing a robust 16-bit MCU with motor control peripherals. When designing with this MCU, plan flash sizing carefully: 64KB is sufficient for cluster firmware with LCD and gauge control, but code growth may require moving to higher-memory family variants in the same package. This page synthesizes distributor availability data, same-family drop-in alternatives, and practical design guidance not found in the manufacturer datasheet alone.

Angebot Auf Lager
S9S12HY64JOCLL - 16-bit 64KB Flash MCU | NXP Semiconductors
S9S12HY64JOCLL

S9S12HY64JOCLL - 16-bit 64KB Flash MCU | NXP Semiconductors

The NXP S9S12HY64JOCLL is a 16-bit HCS12 microcontroller from the MC9S12HY/HA family, featuring 64KB of Flash, 4KB of RAM, and a 32 MHz CPU core, housed in a 100-pin LQFP (14x14 mm) package. The part is targeted at entry-level automotive instrument clusters, body controllers, and gateway applications that need CAN, LIN/J2602, LCD segment drivers, and stepper-motor timers on a single die. According to the verified distributor listing, the device offers up to 32 MHz of HCS12 CPU performance, integrated 64KB Flash, 4KB RAM, multiple timers and analog modules, plus CAN and LIN connectivity for automotive networks. The "J0CLL" suffix decodes as temperature grade -40C to +85C with Pb-free / Pb-bismuth (LL) packaging markings per NXP ordering information. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash/RAM), peripherals (timers, ADC, communications), and interrupt logic into one package. The MC9S12HY/HA family is built around the HCS12 CPU, which belongs to the Freescale/NXP S12 product line of 16-bit automotive microcontrollers that sit hierarchically between 8-bit MCUs and 32-bit Power Architecture / ARM Cortex-M devices. Compared with general-purpose 8-bit MCUs, the HCS12 offers wider data paths, richer peripherals, and CAN/LIN support that the automotive segment demands. Key features include 16-bit CPU core, 64KB on-chip Flash, 4KB on-chip RAM, integrated LCD controller (for instrument-cluster glass driving), multiple PWM motor-driver timers, CAN and LIN/J2602 interfaces, plus built-in analog such as ATD (analog-to-digital) and SCI/SPI. The peripheral set has been tuned so a single chip can replace a cluster of discrete controllers in dashboard or body-controller designs. The wide operating voltage range (typical 5V +/-10%) and automotive temperature grade make the part robust under hood and behind-dash thermal stress. Architecturally, the S9S12HY64JOCLL uses the well-established HCS12 CPU with BDM (background debug mode) and a Flash-based memory map; this allows in-system programming and on-board debug using the standard P&E / NXP BDM tools. The integrated LCD driver and motor-timer peripherals are implemented as function-specific state machines tied to the S12 bus matrix, letting the CPU remain free for application code while the peripherals refresh segments step by step. Typical applications include entry-level automotive instrument clusters (speedometer/fuel gauges on TN/STN glass), automotive body controllers and HVAC panels, CAN/LIN slave nodes, simple stepper-motor or DC-motor drivers for cluster needles, and generic 16-bit automotive control modules. The wide temperature range and automotive grade qualification allow deployment behind the dashboard or in the engine bay periphery. When designing with this device, allocate PCB area for the 100-LQFP (14x14) footprint and decoupling, and confirm that the LCD panel you select is compatible with the duty and bias modes supported by the S12 LCD driver. Reserve one BDM port for in-circuit debug during development. This page synthesizes distributor pricing, drop-in alternatives from the MC9S12 family, application guidance, and design notes not found on individual distributor listings.

USD $8,40 Auf Lager