6EDL7141XUMA1 vs BTS70402EPGXUMA1 Vergleich
Detaillierter Direktvergleich von 6EDL7141XUMA1 von Infineon und BTS70402EPGXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | 6EDL7141XUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Motor Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,05 | $3,18 |
| Product Type | Three-phase gate driver IC (smart gate driver) | — |
| Topologie | Three half-bridge drivers (high-side + low-side) | — |
| Betriebsversorgungsspannung | 5.5 V to 60 V (recommended) | — |
| Peak Gate Drive Current | 1.5 A source / 1.5 A sink | — |
| Number of Half-Bridges | 3 | — |
| Drive Type | Non-Inverting | — |
| Programmable Drive Voltage | Yes (configurable via SPI) | — |
| Integrated Current Sense Amplifiers | 3 (bi-directional low-side, programmable gain) | — |
| R_DSON Sensing | Supported via internal phase-node connections | — |
| Current Sense Output Compatibility | 3.3 V and 5 V logic | — |
| Communication Interface | SPI (digital configuration, >50 parameters) | — |
| Integrated Bootstrap Diodes | Yes | — |
| Integrated Charge Pump | Yes | — |
| Gehäuse | PG-VQFN-48-78 (7x7 mm power QFN with exposed pad) | PG-TSDSO-14 (exposed thermal pad) |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | -40 °C to +150 °C junction |
| MSL-Level | [DATA_NEEDED: MSL rating] | — |
| RoHS-Status | Compliant (per Infineon product page) | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Funktion | — | Smart High-Side Power Switch |
| Number of Channels | — | 4 |
| Ausgangskonfiguration | — | High-side, N-channel MOSFET |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Protection Features | — | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |