6EDL7141XUMA1 vs BTS70402EPGXUMA1 Сравнение
Подробное сравнение бок о бок 6EDL7141XUMA1 от Infineon и BTS70402EPGXUMA1 от Infineon. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Сравнение характеристик
| Параметр | 6EDL7141XUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Бренд | Infineon | Infineon |
| Категория | Motor Drivers | Power MOSFET Drivers |
| Статус жизненного цикла | Активен | Активен |
| Наличие | In Stock | In Stock |
| Цена за единицу (USD) | $2,05 | $3,18 |
| Product Type | Three-phase gate driver IC (smart gate driver) | — |
| Топология | Three half-bridge drivers (high-side + low-side) | — |
| Рабочее напряжение питания | 5.5 V to 60 V (recommended) | — |
| Peak Gate Drive Current | 1.5 A source / 1.5 A sink | — |
| Number of Half-Bridges | 3 | — |
| Drive Type | Non-Inverting | — |
| Programmable Drive Voltage | Yes (configurable via SPI) | — |
| Integrated Current Sense Amplifiers | 3 (bi-directional low-side, programmable gain) | — |
| R_DSON Sensing | Supported via internal phase-node connections | — |
| Current Sense Output Compatibility | 3.3 V and 5 V logic | — |
| Communication Interface | SPI (digital configuration, >50 parameters) | — |
| Integrated Bootstrap Diodes | Yes | — |
| Integrated Charge Pump | Yes | — |
| Корпус | PG-VQFN-48-78 (7x7 mm power QFN with exposed pad) | PG-TSDSO-14 (exposed thermal pad) |
| Тип монтажа | Surface Mount | Surface Mount |
| Диапазон рабочих температур | [DATA_NEEDED: operating temperature range] | -40 °C to +150 °C junction |
| Уровень MSL | [DATA_NEEDED: MSL rating] | — |
| Статус RoHS | Compliant (per Infineon product page) | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Функция | — | Smart High-Side Power Switch |
| Number of Channels | — | 4 |
| Выходная конфигурация | — | High-side, N-channel MOSFET |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Protection Features | — | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |