AD5142ABCPZ100-RL7 vs AD5142ABCPZ10-RL7 Vergleich
Detaillierter Direktvergleich von AD5142ABCPZ100-RL7 von Analog Devices und AD5142ABCPZ10-RL7 von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
AD5142ABCPZ100-RL7 - 100kΩ Dual 256-Tap I²C Nonvolatile DigiPOT | Analog Devices
AD5142ABCPZ100-RL7 ✓ AktivAnalog Devices
AD5142ABCPZ10-RL7 - Dual 10kΩ 256-Tap I²C Non-Volatile DigiPot | Analog Devices
AD5142ABCPZ10-RL7 ✓ AktivSpezifikationsvergleich
| Parameter | AD5142ABCPZ100-RL7 | AD5142ABCPZ10-RL7 |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $3,40 | $3,36 |
| Manufacturer | Analog Devices Inc. | — |
| Part Number | AD5142ABCPZ100-RL7 | — |
| Funktion | Digital Potentiometer (DigiPOT) | — |
| Number of Circuits | 2 (dual) | — |
| Number of Taps | 256 per channel | 256 positions |
| Nominal Resistance (R-AB) | 100 kΩ | — |
| Resistor Tolerance | ±8% | ±8% |
| Schnittstelle | I²C-compatible | I²C-compatible (SCL up to 3 MHz) |
| Memory | Nonvolatile EEPROM (wiper position retained) | — |
| Wiper Resistance (RW) | 40 Ω at end positions (typical) | — |
| Current Density (A, B, W pins) | ±6 mA maximum | — |
| Supply Voltage (Single) | 2.3 V to 5.5 V | — |
| Betriebstemperatur | -40 °C to +125 °C | -40 °C to +125 °C |
| Gehäuse | 16-LFCSP (3 mm x 3 mm) with exposed pad | 16-lead LFCSP (3 mm × 3 mm) with EP |
| Taper / Taper Type | Linear | — |
| Packaging | Tape & Reel (RL7 = 7-inch reel) | — |
| RoHS-Status | Compliant | Compliant |
| MSL-Level | [DATA_NEEDED: MSL level] | — |
| Wiper Position Readback | Yes (via I²C) | — |
| EEPROM Endurance | [DATA_NEEDED: write cycles] | — |
| Number of Potentiometers | — | 2 (dual) |
| Nominal End-to-End Resistance (R-AB) | — | 10 kΩ |
| Speichertyp | — | Non-volatile EEPROM |
| Temperature Coefficient | — | 35 ppm/°C nominal |
| Wiper Resistance (ends of array) | — | 40 Ω typical |
| Continuous Current on A/B/W Pins | — | ±6 mA max |
| Supply Voltage (VDD) | — | 2.3 V to 5.5 V |
| Montageart | — | Surface Mount |
| Taper | — | Linear |
| AEC-Q100 Qualification | — | Not AEC-Q100 qualified (industrial grade) |
| Soft Reset | — | Yes (loads default wiper setting) |