AD5142ABCPZ100-RL7 vs AD5142ABCPZ10-RL7 Comparaison
Comparaison détaillée côte à côte de AD5142ABCPZ100-RL7 par Analog Devices et AD5142ABCPZ10-RL7 par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
AD5142ABCPZ100-RL7 - 100kΩ Dual 256-Tap I²C Nonvolatile DigiPOT | Analog Devices
AD5142ABCPZ100-RL7 ✓ ActifAnalog Devices
AD5142ABCPZ10-RL7 - Dual 10kΩ 256-Tap I²C Non-Volatile DigiPot | Analog Devices
AD5142ABCPZ10-RL7 ✓ ActifComparaison des spécifications
| Paramètre | AD5142ABCPZ100-RL7 | AD5142ABCPZ10-RL7 |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,40 | $3,36 |
| Manufacturer | Analog Devices Inc. | — |
| Part Number | AD5142ABCPZ100-RL7 | — |
| Fonction | Digital Potentiometer (DigiPOT) | — |
| Number of Circuits | 2 (dual) | — |
| Number of Taps | 256 per channel | 256 positions |
| Nominal Resistance (R-AB) | 100 kΩ | — |
| Resistor Tolerance | ±8% | ±8% |
| Interface | I²C-compatible | I²C-compatible (SCL up to 3 MHz) |
| Memory | Nonvolatile EEPROM (wiper position retained) | — |
| Wiper Resistance (RW) | 40 Ω at end positions (typical) | — |
| Current Density (A, B, W pins) | ±6 mA maximum | — |
| Supply Voltage (Single) | 2.3 V to 5.5 V | — |
| Température de fonctionnement | -40 °C to +125 °C | -40 °C to +125 °C |
| Boîtier | 16-LFCSP (3 mm x 3 mm) with exposed pad | 16-lead LFCSP (3 mm × 3 mm) with EP |
| Taper / Taper Type | Linear | — |
| Packaging | Tape & Reel (RL7 = 7-inch reel) | — |
| Statut RoHS | Compliant | Compliant |
| Niveau MSL | [DATA_NEEDED: MSL level] | — |
| Wiper Position Readback | Yes (via I²C) | — |
| EEPROM Endurance | [DATA_NEEDED: write cycles] | — |
| Number of Potentiometers | — | 2 (dual) |
| Nominal End-to-End Resistance (R-AB) | — | 10 kΩ |
| Type de mémoire | — | Non-volatile EEPROM |
| Temperature Coefficient | — | 35 ppm/°C nominal |
| Wiper Resistance (ends of array) | — | 40 Ω typical |
| Continuous Current on A/B/W Pins | — | ±6 mA max |
| Supply Voltage (VDD) | — | 2.3 V to 5.5 V |
| Type de montage | — | Surface Mount |
| Taper | — | Linear |
| AEC-Q100 Qualification | — | Not AEC-Q100 qualified (industrial grade) |
| Soft Reset | — | Yes (loads default wiper setting) |